kconfig: Standardize "depends" -> "depends on" in Kconfig files

Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 125093c..536d5bf 100644 (file)
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -29,7 +29,7 @@ them. A single configuration option is defined like this:
 
 config MODVERSIONS
        bool "Set version information on all module symbols"
-       depends MODULES
+       depends on MODULES
        help
          Usually, modules have to be recompiled whenever you switch to a new
          kernel.  ...
@@ -163,7 +163,7 @@ The position of a menu entry in the tree is determined in two ways. First
 it can be specified explicitly:
 
 menu "Network device support"
-       depends NET
+       depends on NET
 
 config NETDEVICES
        ...
@@ -188,10 +188,10 @@ config MODULES
 
 config MODVERSIONS
        bool "Set version information on all module symbols"
-       depends MODULES
+       depends on MODULES
 
 comment "module support disabled"
-       depends !MODULES
+       depends on !MODULES
 
 MODVERSIONS directly depends on MODULES, this means it's only visible if
 MODULES is different from 'n'. The comment on the other hand is always

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 9e3d0bd..5c0a100 100644 (file)
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -75,28 +75,28 @@ endmenu
 
 config MACH_POODLE
        bool "Enable Sharp SL-5600 (Poodle) Support"
-       depends PXA_SHARPSL_25x
+       depends on PXA_SHARPSL_25x
        select SHARP_LOCOMO
        select PXA_SSP
 
 config MACH_CORGI
        bool "Enable Sharp SL-C700 (Corgi) Support"
-       depends PXA_SHARPSL_25x
+       depends on PXA_SHARPSL_25x
        select PXA_SHARP_C7xx
 
 config MACH_SHEPHERD
        bool "Enable Sharp SL-C750 (Shepherd) Support"
-       depends PXA_SHARPSL_25x
+       depends on PXA_SHARPSL_25x
        select PXA_SHARP_C7xx
 
 config MACH_HUSKY
        bool "Enable Sharp SL-C760 (Husky) Support"
-       depends PXA_SHARPSL_25x
+       depends on PXA_SHARPSL_25x
        select PXA_SHARP_C7xx
 
 config MACH_AKITA
        bool "Enable Sharp SL-1000 (Akita) Support"
-       depends PXA_SHARPSL_27x
+       depends on PXA_SHARPSL_27x
        select PXA_SHARP_Cxx00
        select MACH_SPITZ
        select I2C
@@ -104,17 +104,17 @@ config MACH_AKITA
 
 config MACH_SPITZ
        bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-       depends PXA_SHARPSL_27x
+       depends on PXA_SHARPSL_27x
        select PXA_SHARP_Cxx00
 
 config MACH_BORZOI
        bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-       depends PXA_SHARPSL_27x
+       depends on PXA_SHARPSL_27x
        select PXA_SHARP_Cxx00
 
 config MACH_TOSA
        bool "Enable Sharp SL-6000x (Tosa) Support"
-       depends PXA_SHARPSL_25x
+       depends on PXA_SHARPSL_25x
 
 config PXA25x
        bool

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ec752e1..f2dc363 100644 (file)
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -113,7 +113,7 @@ endchoice
 
 config OMAP_SERIAL_WAKE
        bool "Enable wake-up events for serial ports"
-       depends OMAP_MUX
+       depends on OMAP_MUX
        default y
        help
          Select this option if you want to have your system wake up

diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig
index ed39d6a..2f2a13e 100644 (file)
--- a/arch/powerpc/platforms/4xx/Kconfig
+++ b/arch/powerpc/platforms/4xx/Kconfig
@@ -179,7 +179,7 @@ config BIOS_FIXUP
 # OAK doesn't exist but wanted to keep this around for any future 403GCX boards
 config 403GCX
        bool
-       depends OAK
+       depends on OAK
        default y
 
 config 405EP

diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index ddbe398..b3c2ce4 100644 (file)
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -35,7 +35,7 @@ config HDPU
          Select HDPU if configuring a Sky Computers Compute Blade.
 
 config HDPU_FEATURES
-       depends HDPU
+       depends on HDPU
        tristate "HDPU-Features"
        help
          Select to enable HDPU enhanced features.

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 692b5ba..8eb82ef 100644 (file)
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -624,7 +624,7 @@ config HDPU
          Select HDPU if configuring a Sky Computers Compute Blade.
 
 config HDPU_FEATURES
-       depends HDPU
+       depends on HDPU
        tristate "HDPU-Features"
        help
          Select to enable HDPU enhanced features.
@@ -735,7 +735,7 @@ config LITE5200
 
 config LITE5200B
        bool "Freescale LITE5200B"
-       depends LITE5200
+       depends on LITE5200
        help
          Support for the LITE5200B dev board for the MPC5200 from Freescale.
          This is the new board with 2 PCI slots.

diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 293bd48..6980de4 100644 (file)
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -189,7 +189,7 @@ config BIOS_FIXUP
 # OAK doesn't exist but wanted to keep this around for any future 403GCX boards
 config 403GCX
        bool
-       depends OAK
+       depends on OAK
        default y
 
 config 405EP

diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
index bcf8258..f0d4d72 100644 (file)
--- a/arch/v850/Kconfig
+++ b/arch/v850/Kconfig
@@ -105,17 +105,17 @@ menu "Processor type and features"
    # currently support
    config V850E_MA1
          bool
-         depends RTE_CB_MA1
+         depends on RTE_CB_MA1
          default y
    # Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
    config V850E_TEG
          bool
-         depends RTE_CB_NB85E
+         depends on RTE_CB_NB85E
          default y
    # ... and the RTE-V850E/ME2-CB - V850E/ME2
    config V850E_ME2
          bool
-         depends RTE_CB_ME2
+         depends on RTE_CB_ME2
          default y
 
 
@@ -123,7 +123,7 @@ menu "Processor type and features"
 
    config V850E2_SIM85E2
          bool
-         depends V850E2_SIM85E2C || V850E2_SIM85E2S
+         depends on V850E2_SIM85E2C || V850E2_SIM85E2S
          default y
 
 
@@ -132,7 +132,7 @@ menu "Processor type and features"
    # V850E2 processors
    config V850E2
          bool
-         depends V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
+         depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
          default y
 
 
@@ -141,7 +141,7 @@ menu "Processor type and features"
    # Boards in the RTE-x-CB series
    config RTE_CB
          bool
-         depends RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
+         depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
          default y
 
    config RTE_CB_MULTI
@@ -149,28 +149,28 @@ menu "Processor type and features"
          # RTE_CB_NB85E can either have multi ROM support or not, but
          # other platforms (currently only RTE_CB_MA1) require it.
          prompt "Multi monitor ROM support" if RTE_CB_NB85E
-         depends RTE_CB_MA1 || RTE_CB_NB85E
+         depends on RTE_CB_MA1 || RTE_CB_NB85E
          default y
 
    config RTE_CB_MULTI_DBTRAP
          bool "Pass illegal insn trap / dbtrap to kernel"
-         depends RTE_CB_MULTI
+         depends on RTE_CB_MULTI
          default n
 
    config RTE_CB_MA1_KSRAM
          bool "Kernel in SRAM (limits size of kernel)"
-         depends RTE_CB_MA1 && RTE_CB_MULTI
+         depends on RTE_CB_MA1 && RTE_CB_MULTI
          default n
 
    config RTE_MB_A_PCI
          bool "Mother-A PCI support"
-         depends RTE_CB
+         depends on RTE_CB
          default y
 
    # The GBUS is used to talk to the RTE-MOTHER-A board
    config RTE_GBUS_INT
          bool
-         depends RTE_MB_A_PCI
+         depends on RTE_MB_A_PCI
          default y
 
    # The only PCI bus we support is on the RTE-MOTHER-A board
@@ -209,7 +209,7 @@ menu "Processor type and features"
 
    config ROM_KERNEL
          bool "Kernel in ROM"
-         depends V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
+         depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
 
    # Some platforms pre-zero memory, in which case the kernel doesn't need to
    config ZERO_BSS
@@ -225,10 +225,10 @@ menu "Processor type and features"
 
    config V850E_HIGHRES_TIMER
          bool "High resolution timer support"
-         depends V850E_TIMER_D
+         depends on V850E_TIMER_D
    config TIME_BOOTUP
          bool "Time bootup"
-         depends V850E_HIGHRES_TIMER
+         depends on V850E_HIGHRES_TIMER
 
    config RESET_GUARD
          bool "Reset Guard"

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index b10f4d8..0a3aee2 100644 (file)
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -867,7 +867,7 @@ config SONYPI
 
 config TANBAC_TB0219
        tristate "TANBAC TB0219 base board support"
-       depends TANBAC_TB022X
+       depends on TANBAC_TB022X
        select GPIO_VR41XX
 
 source "drivers/char/agp/Kconfig"

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index e23bc0d..3f82805 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -796,7 +796,7 @@ endchoice
 config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
        int "Maximum transfer size (KB) per request (up to 128)"
        default "128"
-       depends BLK_DEV_IDE_AU1XXX
+       depends on BLK_DEV_IDE_AU1XXX
 
 config IDE_ARM
        def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 176142c..7399ba7 100644 (file)
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -12,7 +12,7 @@ config NEW_LEDS
 
 config LEDS_CLASS
        tristate "LED Class Support"
-       depends NEW_LEDS
+       depends on NEW_LEDS
        help
          This option enables the led sysfs class in /sys/class/leds.  You'll
          need this to do anything useful with LEDs.  If unsure, say N.
@@ -21,28 +21,28 @@ comment "LED drivers"
 
 config LEDS_CORGI
        tristate "LED Support for the Sharp SL-C7x0 series"
-       depends LEDS_CLASS && PXA_SHARP_C7xx
+       depends on LEDS_CLASS && PXA_SHARP_C7xx
        help
          This option enables support for the LEDs on Sharp Zaurus
          SL-C7x0 series (C700, C750, C760, C860).
 
 config LEDS_LOCOMO
        tristate "LED Support for Locomo device"
-       depends LEDS_CLASS && SHARP_LOCOMO
+       depends on LEDS_CLASS && SHARP_LOCOMO
        help
          This option enables support for the LEDs on Sharp Locomo.
          Zaurus models SL-5500 and SL-5600.
 
 config LEDS_SPITZ
        tristate "LED Support for the Sharp SL-Cxx00 series"
-       depends LEDS_CLASS && PXA_SHARP_Cxx00
+       depends on LEDS_CLASS && PXA_SHARP_Cxx00
        help
          This option enables support for the LEDs on Sharp Zaurus
          SL-Cxx00 series (C1000, C3000, C3100).
 
 config LEDS_IXP4XX
        tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
-       depends LEDS_CLASS && ARCH_IXP4XX
+       depends on LEDS_CLASS && ARCH_IXP4XX
        help
          This option enables support for the LEDs connected to GPIO
          outputs of the Intel IXP4XX processors.  To be useful the
@@ -51,7 +51,7 @@ config LEDS_IXP4XX
 
 config LEDS_TOSA
        tristate "LED Support for the Sharp SL-6000 series"
-       depends LEDS_CLASS && PXA_SHARPSL
+       depends on LEDS_CLASS && PXA_SHARPSL
        help
          This option enables support for the LEDs on Sharp Zaurus
          SL-6000 series.
@@ -65,7 +65,7 @@ config LEDS_S3C24XX
 
 config LEDS_AMS_DELTA
        tristate "LED Support for the Amstrad Delta (E3)"
-       depends LEDS_CLASS && MACH_AMS_DELTA
+       depends on LEDS_CLASS && MACH_AMS_DELTA
        help
          This option enables support for the LEDs on Amstrad Delta (E3).
 
@@ -86,7 +86,7 @@ comment "LED Triggers"
 
 config LEDS_TRIGGERS
        bool "LED Trigger support"
-       depends NEW_LEDS
+       depends on NEW_LEDS
        help
          This option enables trigger support for the leds class.
          These triggers allow kernel events to drive the LEDs and can
@@ -94,21 +94,21 @@ config LEDS_TRIGGERS
 
 config LEDS_TRIGGER_TIMER
        tristate "LED Timer Trigger"
-       depends LEDS_TRIGGERS
+       depends on LEDS_TRIGGERS
        help
          This allows LEDs to be controlled by a programmable timer
          via sysfs. If unsure, say Y.
 
 config LEDS_TRIGGER_IDE_DISK
        bool "LED IDE Disk Trigger"
-       depends LEDS_TRIGGERS && BLK_DEV_IDEDISK
+       depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
        help
          This allows LEDs to be controlled by IDE disk activity.
          If unsure, say Y.
 
 config LEDS_TRIGGER_HEARTBEAT
        tristate "LED Heartbeat Trigger"
-       depends LEDS_TRIGGERS
+       depends on LEDS_TRIGGERS
        help
          This allows LEDs to be controlled by a CPU load average.
          The flash frequency is a hyperbolic function of the 1-minute

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0b36dd5..2978c09 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -663,7 +663,7 @@ config V850E_UART
 
 config V850E_UARTB
         bool
-       depends V850E_UART && V850E_ME2
+       depends on V850E_UART && V850E_ME2
        default y
 
 config V850E_UART_CONSOLE
@@ -909,7 +909,7 @@ config SERIAL_M32R_PLDSIO
 
 config SERIAL_TXX9
        bool "TMPTX39XX/49XX SIO support"
-       depends HAS_TXX9_SERIAL
+       depends on HAS_TXX9_SERIAL
        select SERIAL_CORE
        default y
 

diff --git a/fs/Kconfig b/fs/Kconfig
index 0f8dfd5..276ff3b 100644 (file)
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1002,7 +1002,7 @@ config TMPFS_POSIX_ACL
 
 config HUGETLBFS
        bool "HugeTLB file system support"
-       depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
+       depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
        help
          hugetlbfs is a filesystem backing for HugeTLB pages, based on
          ramfs. For architectures that support it, say Y here and read

diff --git a/sound/aoa/fabrics/Kconfig b/sound/aoa/fabrics/Kconfig
index c3bc770..50d7021 100644 (file)
--- a/sound/aoa/fabrics/Kconfig
+++ b/sound/aoa/fabrics/Kconfig
@@ -1,6 +1,6 @@
 config SND_AOA_FABRIC_LAYOUT
        tristate "layout-id fabric"
-       depends SND_AOA
+       depends on SND_AOA
        select SND_AOA_SOUNDBUS
        select SND_AOA_SOUNDBUS_I2S
        ---help---