mwl8k: do rx/tx ring initialisation after loading firmware

Whether the firmware we have loaded is AP or STA firmware decides
which receive descriptor format we have to use.  Therefore, move
rx/tx ring initialisation to be after firmware loading.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 19fe712..0ae56cb 100644 (file)
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -127,20 +127,22 @@ struct mwl8k_tx_queue {
 };
 
 struct mwl8k_priv {
-       void __iomem *sram;
-       void __iomem *regs;
        struct ieee80211_hw *hw;
-
        struct pci_dev *pdev;
 
        struct mwl8k_device_info *device_info;
-       bool ap_fw;
-       struct rxd_ops *rxd_ops;
 
-       /* firmware files and meta data */
+       void __iomem *sram;
+       void __iomem *regs;
+
+       /* firmware */
        struct firmware *fw_helper;
        struct firmware *fw_ucode;
 
+       /* hardware/firmware parameters */
+       bool ap_fw;
+       struct rxd_ops *rxd_ops;
+
        /* firmware access */
        struct mutex fw_mutex;
        struct task_struct *fw_mutex_owner;
@@ -547,7 +549,6 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 {
        struct mwl8k_priv *priv = hw->priv;
        struct firmware *fw = priv->fw_ucode;
-       struct mwl8k_device_info *di = priv->device_info;
        int rc;
        int loops;
 
@@ -579,7 +580,7 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
                return rc;
        }
 
-       if (di->modes & BIT(NL80211_IFTYPE_AP))
+       if (priv->device_info->modes & BIT(NL80211_IFTYPE_AP))
                iowrite32(MWL8K_MODE_AP, priv->regs + MWL8K_HIU_GEN_PTR);
        else
                iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
@@ -3300,6 +3301,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
                printed_version = 1;
        }
 
+
        rc = pci_enable_device(pdev);
        if (rc) {
                printk(KERN_ERR "%s: Cannot enable new PCI device\n",
@@ -3316,6 +3318,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 
        pci_set_master(pdev);
 
+
        hw = ieee80211_alloc_hw(sizeof(*priv), &mwl8k_ops);
        if (hw == NULL) {
                printk(KERN_ERR "%s: ieee80211 alloc failed\n", MWL8K_NAME);
@@ -3323,17 +3326,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
                goto err_free_reg;
        }
 
+       SET_IEEE80211_DEV(hw, &pdev->dev);
+       pci_set_drvdata(pdev, hw);
+
        priv = hw->priv;
        priv->hw = hw;
        priv->pdev = pdev;
        priv->device_info = &mwl8k_info_tbl[id->driver_data];
-       priv->rxd_ops = priv->device_info->rxd_ops;
-       priv->sniffer_enabled = false;
-       priv->wmm_enabled = false;
-       priv->pending_tx_pkts = 0;
 
-       SET_IEEE80211_DEV(hw, &pdev->dev);
-       pci_set_drvdata(pdev, hw);
 
        priv->sram = pci_iomap(pdev, 0, 0x10000);
        if (priv->sram == NULL) {
@@ -3356,6 +3356,37 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
                }
        }
 
+
+       /* Reset firmware and hardware */
+       mwl8k_hw_reset(priv);
+
+       /* Ask userland hotplug daemon for the device firmware */
+       rc = mwl8k_request_firmware(priv);
+       if (rc) {
+               printk(KERN_ERR "%s: Firmware files not found\n",
+                      wiphy_name(hw->wiphy));
+               goto err_stop_firmware;
+       }
+
+       /* Load firmware into hardware */
+       rc = mwl8k_load_firmware(hw);
+       if (rc) {
+               printk(KERN_ERR "%s: Cannot start firmware\n",
+                      wiphy_name(hw->wiphy));
+               goto err_stop_firmware;
+       }
+
+       /* Reclaim memory once firmware is successfully loaded */
+       mwl8k_release_firmware(priv);
+
+
+       priv->rxd_ops = priv->device_info->rxd_ops;
+
+       priv->sniffer_enabled = false;
+       priv->wmm_enabled = false;
+       priv->pending_tx_pkts = 0;
+
+
        memcpy(priv->channels, mwl8k_channels, sizeof(mwl8k_channels));
        priv->band.band = IEEE80211_BAND_2GHZ;
        priv->band.channels = priv->channels;
@@ -3400,11 +3431,11 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
        /* Power management cookie */
        priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma);
        if (priv->cookie == NULL)
-               goto err_iounmap;
+               goto err_stop_firmware;
 
        rc = mwl8k_rxq_init(hw, 0);
        if (rc)
-               goto err_iounmap;
+               goto err_free_cookie;
        rxq_refill(hw, 0, INT_MAX);
 
        mutex_init(&priv->fw_mutex);
@@ -3435,28 +3466,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
                goto err_free_queues;
        }
 
-       /* Reset firmware and hardware */
-       mwl8k_hw_reset(priv);
-
-       /* Ask userland hotplug daemon for the device firmware */
-       rc = mwl8k_request_firmware(priv);
-       if (rc) {
-               printk(KERN_ERR "%s: Firmware files not found\n",
-                      wiphy_name(hw->wiphy));
-               goto err_free_irq;
-       }
-
-       /* Load firmware into hardware */
-       rc = mwl8k_load_firmware(hw);
-       if (rc) {
-               printk(KERN_ERR "%s: Cannot start firmware\n",
-                      wiphy_name(hw->wiphy));
-               goto err_stop_firmware;
-       }
-
-       /* Reclaim memory once firmware is successfully loaded */
-       mwl8k_release_firmware(priv);
-
        /*
         * Temporarily enable interrupts.  Initial firmware host
         * commands use interrupts and avoids polling.  Disable
@@ -3475,14 +3484,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
        if (rc) {
                printk(KERN_ERR "%s: Cannot initialise firmware\n",
                       wiphy_name(hw->wiphy));
-               goto err_stop_firmware;
+               goto err_free_irq;
        }
 
        /* Turn radio off */
        rc = mwl8k_cmd_radio_disable(hw);
        if (rc) {
                printk(KERN_ERR "%s: Cannot disable\n", wiphy_name(hw->wiphy));
-               goto err_stop_firmware;
+               goto err_free_irq;
        }
 
        /* Clear MAC address */
@@ -3490,7 +3499,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
        if (rc) {
                printk(KERN_ERR "%s: Cannot clear MAC address\n",
                       wiphy_name(hw->wiphy));
-               goto err_stop_firmware;
+               goto err_free_irq;
        }
 
        /* Disable interrupts */
@@ -3501,7 +3510,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
        if (rc) {
                printk(KERN_ERR "%s: Cannot register device\n",
                       wiphy_name(hw->wiphy));
-               goto err_stop_firmware;
+               goto err_free_irq;
        }
 
        printk(KERN_INFO "%s: %s v%d, %pM, %s firmware %u.%u.%u.%u\n",
@@ -3513,10 +3522,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 
        return 0;
 
-err_stop_firmware:
-       mwl8k_hw_reset(priv);
-       mwl8k_release_firmware(priv);
-
 err_free_irq:
        iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
        free_irq(priv->pdev->irq, hw);
@@ -3526,11 +3531,16 @@ err_free_queues:
                mwl8k_txq_deinit(hw, i);
        mwl8k_rxq_deinit(hw, 0);
 
-err_iounmap:
+err_free_cookie:
        if (priv->cookie != NULL)
                pci_free_consistent(priv->pdev, 4,
                                priv->cookie, priv->cookie_dma);
 
+err_stop_firmware:
+       mwl8k_hw_reset(priv);
+       mwl8k_release_firmware(priv);
+
+err_iounmap:
        if (priv->regs != NULL)
                pci_iounmap(pdev, priv->regs);