mach-ux500: update the DB5500 register file

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index bd88c1e..6ad9832 100644 (file)
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -17,6 +17,8 @@
 #define U5500_GIC_DIST_BASE    0xA0411000
 #define U5500_GIC_CPU_BASE     0xA0410100
 #define U5500_DMA_BASE         0x90030000
+#define U5500_STM_BASE         0x90020000
+#define U5500_STM_REG_BASE     (U5500_STM_BASE + 0xF000)
 #define U5500_MCDE_BASE                0xA0400000
 #define U5500_MODEM_BASE       0xB0000000
 #define U5500_L2CC_BASE                0xA0412000
@@ -29,7 +31,9 @@
 #define U5500_NAND0_BASE       0x60000000
 #define U5500_NAND1_BASE       0x70000000
 #define U5500_TWD_BASE         0xa0410600
+#define U5500_ICN_BASE         0xA0040000
 #define U5500_B2R2_BASE                0xa0200000
+#define U5500_BOOT_ROM_BASE    0x90000000
 
 #define U5500_FSMC_BASE                (U5500_PER1_BASE + 0x0000)
 #define U5500_SDI0_BASE                (U5500_PER1_BASE + 0x1000)
@@ -60,6 +64,7 @@
 #define U5500_MSP1_BASE                (U5500_PER4_BASE + 0x9000)
 #define U5500_GPIO2_BASE       (U5500_PER4_BASE + 0xA000)
 #define U5500_CDETECT_BASE     (U5500_PER4_BASE + 0xF000)
+#define U5500_PRCMU_TCDM_BASE  (U5500_PER4_BASE + 0x18000)
 
 #define U5500_SPI0_BASE                (U5500_PER5_BASE + 0x0000)
 #define U5500_SPI1_BASE                (U5500_PER5_BASE + 0x1000)
@@ -83,7 +88,7 @@
 #define U5500_HASH0_BASE       (U5500_PER6_BASE + 0x1000)
 #define U5500_HASH1_BASE       (U5500_PER6_BASE + 0x2000)
 #define U5500_PKA_BASE         (U5500_PER6_BASE + 0x4000)
-#define U5500_PKAM_BASE                (U5500_PER6_BASE + 0x5000)
+#define U5500_PKAM_BASE                (U5500_PER6_BASE + 0x5100)
 #define U5500_MTU0_BASE                (U5500_PER6_BASE + 0x6000)
 #define U5500_MTU1_BASE                (U5500_PER6_BASE + 0x7000)
 #define U5500_CR_BASE          (U5500_PER6_BASE + 0x8000)
@@ -114,8 +119,19 @@
 #define U5500_MBOX2_LOCAL_START        (U5500_MBOX_BASE + 0x20)
 #define U5500_MBOX2_LOCAL_END  (U5500_MBOX_BASE + 0x3F)
 
-#define U5500_ESRAM_BASE               0x40000000
+#define U5500_ACCCON_BASE_SEC  (0xBFFF0000)
+#define U5500_ACCCON_BASE              (0xBFFF1000)
+#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
+#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
+
+#define U5500_ESRAM_BASE               0x40000000
 #define U5500_ESRAM_DMA_LCPA_OFFSET    0x10000
 #define U5500_DMA_LCPA_BASE    (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
 
+#define U5500_MCDE_SIZE                0x1000
+#define U5500_DSI_LINK_SIZE    0x1000
+#define U5500_DSI_LINK_COUNT   0x2
+#define U5500_DSI_LINK1_BASE   (U5500_MCDE_BASE + U5500_MCDE_SIZE)
+#define U5500_DSI_LINK2_BASE   (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
+
 #endif