--- /dev/null
+/*
+ * Off-channel operation helpers
+ *
+ * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright 2004, Instant802 Networks, Inc.
+ * Copyright 2005, Devicescape Software, Inc.
+ * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
+ * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+
+/*
+ * inform AP that we will go to sleep so that it will buffer the frames
+ * while we scan
+ */
+static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+
+ local->offchannel_ps_enabled = false;
+
+ /* FIXME: what to do when local->pspolling is true? */
+
+ del_timer_sync(&local->dynamic_ps_timer);
+ cancel_work_sync(&local->dynamic_ps_enable_work);
+
+ if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+ local->offchannel_ps_enabled = true;
+ local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+ }
+
+ if (!(local->offchannel_ps_enabled) ||
+ !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
+ /*
+ * If power save was enabled, no need to send a nullfunc
+ * frame because AP knows that we are sleeping. But if the
+ * hardware is creating the nullfunc frame for power save
+ * status (ie. IEEE80211_HW_PS_NULLFUNC_STACK is not
+ * enabled) and power save was enabled, the firmware just
+ * sent a null frame with power save disabled. So we need
+ * to send a new nullfunc frame to inform the AP that we
+ * are again sleeping.
+ */
+ ieee80211_send_nullfunc(local, sdata, 1);
+}
+
+/* inform AP that we are awake again, unless power save is enabled */
+static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+
+ if (!local->ps_sdata)
+ ieee80211_send_nullfunc(local, sdata, 0);
+ else if (local->offchannel_ps_enabled) {
+ /*
+ * In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware
+ * will send a nullfunc frame with the powersave bit set
+ * even though the AP already knows that we are sleeping.
+ * This could be avoided by sending a null frame with power
+ * save bit disabled before enabling the power save, but
+ * this doesn't gain anything.
+ *
+ * When IEEE80211_HW_PS_NULLFUNC_STACK is enabled, no need
+ * to send a nullfunc frame because AP already knows that
+ * we are sleeping, let's just enable power save mode in
+ * hardware.
+ */
+ local->hw.conf.flags |= IEEE80211_CONF_PS;
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+ } else if (local->hw.conf.dynamic_ps_timeout > 0) {
+ /*
+ * If IEEE80211_CONF_PS was not set and the dynamic_ps_timer
+ * had been running before leaving the operating channel,
+ * restart the timer now and send a nullfunc frame to inform
+ * the AP that we are awake.
+ */
+ ieee80211_send_nullfunc(local, sdata, 0);
+ mod_timer(&local->dynamic_ps_timer, jiffies +
+ msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
+ }
+}
+
+void ieee80211_offchannel_stop_beaconing(struct ieee80211_local *local)
+{
+ struct ieee80211_sub_if_data *sdata;
+
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!ieee80211_sdata_running(sdata))
+ continue;
+
+ /* disable beaconing */
+ if (sdata->vif.type == NL80211_IFTYPE_AP ||
+ sdata->vif.type == NL80211_IFTYPE_ADHOC ||
+ sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+ ieee80211_bss_info_change_notify(
+ sdata, BSS_CHANGED_BEACON_ENABLED);
+
+ /*
+ * only handle non-STA interfaces here, STA interfaces
+ * are handled in ieee80211_offchannel_stop_station(),
+ * e.g., from the background scan state machine
+ */
+ if (sdata->vif.type != NL80211_IFTYPE_STATION)
+ netif_stop_queue(sdata->dev);
+ }
+ mutex_unlock(&local->iflist_mtx);
+}
+
+void ieee80211_offchannel_stop_station(struct ieee80211_local *local)
+{
+ struct ieee80211_sub_if_data *sdata;
+
+ /*
+ * notify the AP about us leaving the channel and stop all STA interfaces
+ */
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!ieee80211_sdata_running(sdata))
+ continue;
+
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ netif_stop_queue(sdata->dev);
+ if (sdata->u.mgd.associated)
+ ieee80211_offchannel_ps_enable(sdata);
+ }
+ }
+ mutex_unlock(&local->iflist_mtx);
+}
+
+void ieee80211_offchannel_return(struct ieee80211_local *local,
+ bool enable_beaconing)
+{
+ struct ieee80211_sub_if_data *sdata;
+
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!ieee80211_sdata_running(sdata))
+ continue;
+
+ /* Tell AP we're back */
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ if (sdata->u.mgd.associated)
+ ieee80211_offchannel_ps_disable(sdata);
+ netif_wake_queue(sdata->dev);
+ }
+
+ /* re-enable beaconing */
+ if (enable_beaconing &&
+ (sdata->vif.type == NL80211_IFTYPE_AP ||
+ sdata->vif.type == NL80211_IFTYPE_ADHOC ||
+ sdata->vif.type == NL80211_IFTYPE_MESH_POINT))
+ ieee80211_bss_info_change_notify(
+ sdata, BSS_CHANGED_BEACON_ENABLED);
+ }
+ mutex_unlock(&local->iflist_mtx);
+}
return true;
}
-/*
- * inform AP that we will go to sleep so that it will buffer the frames
- * while we scan
- */
-static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_local *local = sdata->local;
-
- local->scan_ps_enabled = false;
-
- /* FIXME: what to do when local->pspolling is true? */
-
- del_timer_sync(&local->dynamic_ps_timer);
- cancel_work_sync(&local->dynamic_ps_enable_work);
-
- if (local->hw.conf.flags & IEEE80211_CONF_PS) {
- local->scan_ps_enabled = true;
- local->hw.conf.flags &= ~IEEE80211_CONF_PS;
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
- }
-
- if (!(local->scan_ps_enabled) ||
- !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
- /*
- * If power save was enabled, no need to send a nullfunc
- * frame because AP knows that we are sleeping. But if the
- * hardware is creating the nullfunc frame for power save
- * status (ie. IEEE80211_HW_PS_NULLFUNC_STACK is not
- * enabled) and power save was enabled, the firmware just
- * sent a null frame with power save disabled. So we need
- * to send a new nullfunc frame to inform the AP that we
- * are again sleeping.
- */
- ieee80211_send_nullfunc(local, sdata, 1);
-}
-
-/* inform AP that we are awake again, unless power save is enabled */
-static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_local *local = sdata->local;
-
- if (!local->ps_sdata)
- ieee80211_send_nullfunc(local, sdata, 0);
- else if (local->scan_ps_enabled) {
- /*
- * In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware
- * will send a nullfunc frame with the powersave bit set
- * even though the AP already knows that we are sleeping.
- * This could be avoided by sending a null frame with power
- * save bit disabled before enabling the power save, but
- * this doesn't gain anything.
- *
- * When IEEE80211_HW_PS_NULLFUNC_STACK is enabled, no need
- * to send a nullfunc frame because AP already knows that
- * we are sleeping, let's just enable power save mode in
- * hardware.
- */
- local->hw.conf.flags |= IEEE80211_CONF_PS;
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
- } else if (local->hw.conf.dynamic_ps_timeout > 0) {
- /*
- * If IEEE80211_CONF_PS was not set and the dynamic_ps_timer
- * had been running before leaving the operating channel,
- * restart the timer now and send a nullfunc frame to inform
- * the AP that we are awake.
- */
- ieee80211_send_nullfunc(local, sdata, 0);
- mod_timer(&local->dynamic_ps_timer, jiffies +
- msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
- }
-}
-
void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
{
struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_sub_if_data *sdata;
bool was_hw_scan;
mutex_lock(&local->scan_mtx);
drv_sw_scan_complete(local);
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!ieee80211_sdata_running(sdata))
- continue;
-
- /* Tell AP we're back */
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.associated) {
- ieee80211_scan_ps_disable(sdata);
- netif_wake_queue(sdata->dev);
- }
- } else
- netif_wake_queue(sdata->dev);
-
- /* re-enable beaconing */
- if (sdata->vif.type == NL80211_IFTYPE_AP ||
- sdata->vif.type == NL80211_IFTYPE_ADHOC ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- ieee80211_bss_info_change_notify(
- sdata, BSS_CHANGED_BEACON_ENABLED);
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_return(local, true);
done:
ieee80211_recalc_idle(local);
static int ieee80211_start_sw_scan(struct ieee80211_local *local)
{
- struct ieee80211_sub_if_data *sdata;
-
/*
* Hardware/driver doesn't support hw_scan, so use software
* scanning instead. First send a nullfunc frame with power save
*/
drv_sw_scan_start(local);
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!ieee80211_sdata_running(sdata))
- continue;
-
- /* disable beaconing */
- if (sdata->vif.type == NL80211_IFTYPE_AP ||
- sdata->vif.type == NL80211_IFTYPE_ADHOC ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- ieee80211_bss_info_change_notify(
- sdata, BSS_CHANGED_BEACON_ENABLED);
-
- /*
- * only handle non-STA interfaces here, STA interfaces
- * are handled in the scan state machine
- */
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
- netif_stop_queue(sdata->dev);
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_stop_beaconing(local);
local->next_scan_state = SCAN_DECISION;
local->scan_channel_idx = 0;
static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *local,
unsigned long *next_delay)
{
- struct ieee80211_sub_if_data *sdata;
-
- /*
- * notify the AP about us leaving the channel and stop all STA interfaces
- */
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!ieee80211_sdata_running(sdata))
- continue;
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- netif_stop_queue(sdata->dev);
- if (sdata->u.mgd.associated)
- ieee80211_scan_ps_enable(sdata);
- }
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_stop_station(local);
__set_bit(SCAN_OFF_CHANNEL, &local->scanning);
static void ieee80211_scan_state_enter_oper_channel(struct ieee80211_local *local,
unsigned long *next_delay)
{
- struct ieee80211_sub_if_data *sdata = local->scan_sdata;
-
/* switch back to the operating channel */
local->scan_channel = NULL;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
/*
- * notify the AP about us being back and restart all STA interfaces
+ * Only re-enable station mode interface now; beaconing will be
+ * re-enabled once the full scan has been completed.
*/
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!ieee80211_sdata_running(sdata))
- continue;
-
- /* Tell AP we're back */
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.associated)
- ieee80211_scan_ps_disable(sdata);
- netif_wake_queue(sdata->dev);
- }
- }
- mutex_unlock(&local->iflist_mtx);
+ ieee80211_offchannel_return(local, false);
__clear_bit(SCAN_OFF_CHANNEL, &local->scanning);
git.openpandora.org / pandora-kernel.git / commitdiff