return 0;
}
+#ifdef CONFIG_NL80211_TESTMODE
+/*
+ * This section contains example code for using netlink
+ * attributes with the testmode command in nl80211.
+ */
+
+/* These enums need to be kept in sync with userspace */
+enum hwsim_testmode_attr {
+ __HWSIM_TM_ATTR_INVALID = 0,
+ HWSIM_TM_ATTR_CMD = 1,
+ HWSIM_TM_ATTR_PS = 2,
+
+ /* keep last */
+ __HWSIM_TM_ATTR_AFTER_LAST,
+ HWSIM_TM_ATTR_MAX = __HWSIM_TM_ATTR_AFTER_LAST - 1
+};
+
+enum hwsim_testmode_cmd {
+ HWSIM_TM_CMD_SET_PS = 0,
+ HWSIM_TM_CMD_GET_PS = 1,
+};
+
+static const struct nla_policy hwsim_testmode_policy[HWSIM_TM_ATTR_MAX + 1] = {
+ [HWSIM_TM_ATTR_CMD] = { .type = NLA_U32 },
+ [HWSIM_TM_ATTR_PS] = { .type = NLA_U32 },
+};
+
+static int hwsim_fops_ps_write(void *dat, u64 val);
+
+int mac80211_hwsim_testmode_cmd(struct ieee80211_hw *hw, void *data, int len)
+{
+ struct mac80211_hwsim_data *hwsim = hw->priv;
+ struct nlattr *tb[HWSIM_TM_ATTR_MAX + 1];
+ struct sk_buff *skb;
+ int err, ps;
+
+ err = nla_parse(tb, HWSIM_TM_ATTR_MAX, data, len,
+ hwsim_testmode_policy);
+ if (err)
+ return err;
+
+ if (!tb[HWSIM_TM_ATTR_CMD])
+ return -EINVAL;
+
+ switch (nla_get_u32(tb[HWSIM_TM_ATTR_CMD])) {
+ case HWSIM_TM_CMD_SET_PS:
+ if (!tb[HWSIM_TM_ATTR_PS])
+ return -EINVAL;
+ ps = nla_get_u32(tb[HWSIM_TM_ATTR_PS]);
+ return hwsim_fops_ps_write(hwsim, ps);
+ case HWSIM_TM_CMD_GET_PS:
+ skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
+ nla_total_size(sizeof(u32)));
+ if (!skb)
+ return -ENOMEM;
+ NLA_PUT_U32(skb, HWSIM_TM_ATTR_PS, hwsim->ps);
+ return cfg80211_testmode_reply(skb);
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ nla_put_failure:
+ kfree_skb(skb);
+ return -ENOBUFS;
+}
+#endif
+
static const struct ieee80211_ops mac80211_hwsim_ops =
{
.tx = mac80211_hwsim_tx,
.sta_notify = mac80211_hwsim_sta_notify,
.set_tim = mac80211_hwsim_set_tim,
.conf_tx = mac80211_hwsim_conf_tx,
+ CFG80211_TESTMODE_CMD(mac80211_hwsim_testmode_cmd)
};
* @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
* determined by the network interface.
*
+ * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
+ * to identify the device, and the TESTDATA blob attribute to pass through
+ * to the driver.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
NL80211_CMD_JOIN_IBSS,
NL80211_CMD_LEAVE_IBSS,
+ NL80211_CMD_TESTMODE,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
* authorized by user space. Otherwise, port is marked authorized by
* default in station mode.
*
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ * We recommend using nested, driver-specific attributes within this.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
NL80211_ATTR_CONTROL_PORT,
+ NL80211_ATTR_TESTDATA,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
*
* @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
* functions to adjust rfkill hw state
+ *
+ * @testmode_cmd: run a test mode command
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy);
int (*get_tx_power)(struct wiphy *wiphy, int *dbm);
void (*rfkill_poll)(struct wiphy *wiphy);
+
+#ifdef CONFIG_NL80211_TESTMODE
+ int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
+#endif
};
/*
*/
void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
+#ifdef CONFIG_NL80211_TESTMODE
+/**
+ * cfg80211_testmode_alloc_reply_skb - allocate testmode reply
+ * @wiphy: the wiphy
+ * @approxlen: an upper bound of the length of the data that will
+ * be put into the skb
+ *
+ * This function allocates and pre-fills an skb for a reply to
+ * the testmode command. Since it is intended for a reply, calling
+ * it outside of the @testmode_cmd operation is invalid.
+ *
+ * The returned skb (or %NULL if any errors happen) is pre-filled
+ * with the wiphy index and set up in a way that any data that is
+ * put into the skb (with skb_put(), nla_put() or similar) will end
+ * up being within the %NL80211_ATTR_TESTDATA attribute, so all that
+ * needs to be done with the skb is adding data for the corresponding
+ * userspace tool which can then read that data out of the testdata
+ * attribute. You must not modify the skb in any other way.
+ *
+ * When done, call cfg80211_testmode_reply() with the skb and return
+ * its error code as the result of the @testmode_cmd operation.
+ */
+struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
+ int approxlen);
+
+/**
+ * cfg80211_testmode_reply - send the reply skb
+ * @skb: The skb, must have been allocated with
+ * cfg80211_testmode_alloc_reply_skb()
+ *
+ * Returns an error code or 0 on success, since calling this
+ * function will usually be the last thing before returning
+ * from the @testmode_cmd you should return the error code.
+ * Note that this function consumes the skb regardless of the
+ * return value.
+ */
+int cfg80211_testmode_reply(struct sk_buff *skb);
+
+/**
+ * cfg80211_testmode_alloc_event_skb - allocate testmode event
+ * @wiphy: the wiphy
+ * @approxlen: an upper bound of the length of the data that will
+ * be put into the skb
+ * @gfp: allocation flags
+ *
+ * This function allocates and pre-fills an skb for an event on the
+ * testmode multicast group.
+ *
+ * The returned skb (or %NULL if any errors happen) is set up in the
+ * same way as with cfg80211_testmode_alloc_reply_skb() but prepared
+ * for an event. As there, you should simply add data to it that will
+ * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must
+ * not modify the skb in any other way.
+ *
+ * When done filling the skb, call cfg80211_testmode_event() with the
+ * skb to send the event.
+ */
+struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
+ int approxlen, gfp_t gfp);
+
+/**
+ * cfg80211_testmode_event - send the event
+ * @skb: The skb, must have been allocated with
+ * cfg80211_testmode_alloc_event_skb()
+ * @gfp: allocation flags
+ *
+ * This function sends the given @skb, which must have been allocated
+ * by cfg80211_testmode_alloc_event_skb(), as an event. It always
+ * consumes it.
+ */
+void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp);
+
+#define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd),
+#else
+#define CFG80211_TESTMODE_CMD(cmd)
+#endif
+
#endif /* __NET_CFG80211_H */
* @rfkill_poll: Poll rfkill hardware state. If you need this, you also
* need to set wiphy->rfkill_poll to %true before registration,
* and need to call wiphy_rfkill_set_hw_state() in the callback.
+ *
+ * @testmode_cmd: Implement a cfg80211 test mode command.
*/
struct ieee80211_ops {
int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
struct ieee80211_sta *sta, u16 tid, u16 *ssn);
void (*rfkill_poll)(struct ieee80211_hw *hw);
+#ifdef CONFIG_NL80211_TESTMODE
+ int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
+#endif
};
/**
drv_rfkill_poll(local);
}
+#ifdef CONFIG_NL80211_TESTMODE
+int ieee80211_testmode_cmd(struct wiphy *wiphy, void *data, int len)
+{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+
+ if (!local->ops->testmode_cmd)
+ return -EOPNOTSUPP;
+
+ return local->ops->testmode_cmd(&local->hw, data, len);
+}
+#endif
+
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
.set_tx_power = ieee80211_set_tx_power,
.get_tx_power = ieee80211_get_tx_power,
.rfkill_poll = ieee80211_rfkill_poll,
+ CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
};
tristate "Improved wireless configuration API"
depends on RFKILL || !RFKILL
+config NL80211_TESTMODE
+ bool "nl80211 testmode command"
+ depends on CFG80211
+ help
+ The nl80211 testmode command helps implementing things like
+ factory calibration or validation tools for wireless chips.
+
+ Select this option ONLY for kernels that are specifically
+ built for such purposes.
+
+ Debugging tools that are supposed to end up in the hands of
+ users should better be implemented with debugfs.
+
+ Say N.
+
config CFG80211_REG_DEBUG
bool "cfg80211 regulatory debugging"
depends on CFG80211
struct cfg80211_scan_request *scan_req; /* protected by RTNL */
unsigned long suspend_at;
+#ifdef CONFIG_NL80211_TESTMODE
+ struct genl_info *testmode_info;
+#endif
+
#ifdef CONFIG_CFG80211_DEBUGFS
/* Debugfs entries */
struct wiphy_debugfsdentries {
return err;
}
+#ifdef CONFIG_NL80211_TESTMODE
+static struct genl_multicast_group nl80211_testmode_mcgrp = {
+ .name = "testmode",
+};
+
+static int nl80211_testmode_do(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev;
+ int err;
+
+ if (!info->attrs[NL80211_ATTR_TESTDATA])
+ return -EINVAL;
+
+ rtnl_lock();
+
+ rdev = cfg80211_get_dev_from_info(info);
+ if (IS_ERR(rdev)) {
+ err = PTR_ERR(rdev);
+ goto unlock_rtnl;
+ }
+
+ err = -EOPNOTSUPP;
+ if (rdev->ops->testmode_cmd) {
+ rdev->testmode_info = info;
+ err = rdev->ops->testmode_cmd(&rdev->wiphy,
+ nla_data(info->attrs[NL80211_ATTR_TESTDATA]),
+ nla_len(info->attrs[NL80211_ATTR_TESTDATA]));
+ rdev->testmode_info = NULL;
+ }
+
+ cfg80211_put_dev(rdev);
+
+ unlock_rtnl:
+ rtnl_unlock();
+ return err;
+}
+
+static struct sk_buff *
+__cfg80211_testmode_alloc_skb(struct cfg80211_registered_device *rdev,
+ int approxlen, u32 pid, u32 seq, gfp_t gfp)
+{
+ struct sk_buff *skb;
+ void *hdr;
+ struct nlattr *data;
+
+ skb = nlmsg_new(approxlen + 100, gfp);
+ if (!skb)
+ return NULL;
+
+ hdr = nl80211hdr_put(skb, pid, seq, 0, NL80211_CMD_TESTMODE);
+ if (!hdr) {
+ kfree_skb(skb);
+ return NULL;
+ }
+
+ NLA_PUT_U32(skb, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+ data = nla_nest_start(skb, NL80211_ATTR_TESTDATA);
+
+ ((void **)skb->cb)[0] = rdev;
+ ((void **)skb->cb)[1] = hdr;
+ ((void **)skb->cb)[2] = data;
+
+ return skb;
+
+ nla_put_failure:
+ kfree_skb(skb);
+ return NULL;
+}
+
+struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
+ int approxlen)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ if (WARN_ON(!rdev->testmode_info))
+ return NULL;
+
+ return __cfg80211_testmode_alloc_skb(rdev, approxlen,
+ rdev->testmode_info->snd_pid,
+ rdev->testmode_info->snd_seq,
+ GFP_KERNEL);
+}
+EXPORT_SYMBOL(cfg80211_testmode_alloc_reply_skb);
+
+int cfg80211_testmode_reply(struct sk_buff *skb)
+{
+ struct cfg80211_registered_device *rdev = ((void **)skb->cb)[0];
+ void *hdr = ((void **)skb->cb)[1];
+ struct nlattr *data = ((void **)skb->cb)[2];
+
+ if (WARN_ON(!rdev->testmode_info)) {
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ nla_nest_end(skb, data);
+ genlmsg_end(skb, hdr);
+ return genlmsg_reply(skb, rdev->testmode_info);
+}
+EXPORT_SYMBOL(cfg80211_testmode_reply);
+
+struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
+ int approxlen, gfp_t gfp)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ return __cfg80211_testmode_alloc_skb(rdev, approxlen, 0, 0, gfp);
+}
+EXPORT_SYMBOL(cfg80211_testmode_alloc_event_skb);
+
+void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
+{
+ void *hdr = ((void **)skb->cb)[1];
+ struct nlattr *data = ((void **)skb->cb)[2];
+
+ nla_nest_end(skb, data);
+ genlmsg_end(skb, hdr);
+ genlmsg_multicast(skb, 0, nl80211_testmode_mcgrp.id, gfp);
+}
+EXPORT_SYMBOL(cfg80211_testmode_event);
+#endif
+
static struct genl_ops nl80211_ops[] = {
{
.cmd = NL80211_CMD_GET_WIPHY,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
+#ifdef CONFIG_NL80211_TESTMODE
+ {
+ .cmd = NL80211_CMD_TESTMODE,
+ .doit = nl80211_testmode_do,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
+#endif
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
.name = "mlme",
if (err)
goto err_out;
+#ifdef CONFIG_NL80211_TESTMODE
+ err = genl_register_mc_group(&nl80211_fam, &nl80211_testmode_mcgrp);
+ if (err)
+ goto err_out;
+#endif
+
return 0;
err_out:
genl_unregister_family(&nl80211_fam);
git.openpandora.org / pandora-kernel.git / commitdiff