pdc202xx_new: move PIO programming code to pdcnew_set_pio_mode()
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Fri, 25 Jan 2008 21:17:18 +0000 (22:17 +0100)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Fri, 25 Jan 2008 21:17:18 +0000 (22:17 +0100)
* Move PIO programming code from pdcnew_set_mode() to pdcnew_set_pio_mode().

* Rename pdcnew_set_mode() to pdcnew_set_dma_mode().

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/pdc202xx_new.c

index 2b4f44e..79ba8ef 100644 (file)
@@ -146,7 +146,7 @@ static struct udma_timing {
        { 0x1a, 0x01, 0xcb },   /* UDMA mode 6 */
 };
 
-static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
+static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
        ide_hwif_t *hwif        = HWIF(drive);
        u8 adj                  = (drive->dn & 1) ? 0x08 : 0x00;
@@ -177,7 +177,6 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
                                set_indexed_reg(hwif, 0x12 + adj,
                                                udma_timings[mode].reg12);
                                break;
-
                        case XFER_MW_DMA_2:
                        case XFER_MW_DMA_1:
                        case XFER_MW_DMA_0:
@@ -186,18 +185,6 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
                                set_indexed_reg(hwif, 0x0f + adj,
                                                mwdma_timings[mode].reg0f);
                                break;
-                       case XFER_PIO_4:
-                       case XFER_PIO_3:
-                       case XFER_PIO_2:
-                       case XFER_PIO_1:
-                       case XFER_PIO_0:
-                               set_indexed_reg(hwif, 0x0c + adj,
-                                               pio_timings[mode].reg0c);
-                               set_indexed_reg(hwif, 0x0d + adj,
-                                               pio_timings[mode].reg0d);
-                               set_indexed_reg(hwif, 0x13 + adj,
-                                               pio_timings[mode].reg13);
-                               break;
                        default:
                                printk(KERN_ERR "pdc202xx_new: "
                                       "Unknown speed %d ignored\n", speed);
@@ -212,7 +199,14 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
-       pdcnew_set_mode(drive, XFER_PIO_0 + pio);
+       ide_hwif_t *hwif = drive->hwif;
+       u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
+
+       if (max_dma_rate(hwif->pci_dev) == 4) {
+               set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
+               set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d);
+               set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13);
+       }
 }
 
 static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
@@ -466,7 +460,7 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
 static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
 {
        hwif->set_pio_mode = &pdcnew_set_pio_mode;
-       hwif->set_dma_mode = &pdcnew_set_mode;
+       hwif->set_dma_mode = &pdcnew_set_dma_mode;
 
        hwif->quirkproc = &pdcnew_quirkproc;
        hwif->resetproc = &pdcnew_reset;