ath9k: Fix IDLE Powersave

* PS_WAIT_FOR_TX_ACK is used in network-sleep mode and checking
  it for handling IDLE transitions is incorrect. Fix this.

* RX PCU/DMA engines have to be stopped before setting the chip into
  full-sleep mode - otherwise the chip becomes mute.

* Make things a bit clear by checking explicitly for network-sleep
  mode in the tx() routine and add a couple of debug statements
  to aid PS debugging.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 1fc6e33..f4b7334 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -113,21 +113,25 @@ void ath9k_ps_restore(struct ath_softc *sc)
        struct ath_common *common = ath9k_hw_common(sc->sc_ah);
        enum ath9k_power_mode mode;
        unsigned long flags;
+       bool reset;
 
        spin_lock_irqsave(&sc->sc_pm_lock, flags);
        if (--sc->ps_usecount != 0)
                goto unlock;
 
-       if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
+       if (sc->ps_idle) {
+               ath9k_hw_setrxabort(sc->sc_ah, 1);
+               ath9k_hw_stopdmarecv(sc->sc_ah, &reset);
                mode = ATH9K_PM_FULL_SLEEP;
-       else if (sc->ps_enabled &&
-                !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
-                             PS_WAIT_FOR_CAB |
-                             PS_WAIT_FOR_PSPOLL_DATA |
-                             PS_WAIT_FOR_TX_ACK)))
+       } else if (sc->ps_enabled &&
+                  !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
+                                    PS_WAIT_FOR_CAB |
+                                    PS_WAIT_FOR_PSPOLL_DATA |
+                                    PS_WAIT_FOR_TX_ACK))) {
                mode = ATH9K_PM_NETWORK_SLEEP;
-       else
+       } else {
                goto unlock;
+       }
 
        spin_lock(&common->cc_lock);
        ath_hw_cycle_counters_update(common);
@@ -1100,14 +1104,7 @@ static void ath9k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
                }
        }
 
-       /*
-        * Cannot tx while the hardware is in full sleep, it first needs a full
-        * chip reset to recover from that
-        */
-       if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_FULL_SLEEP))
-               goto exit;
-
-       if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
+       if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_NETWORK_SLEEP)) {
                /*
                 * We are using PS-Poll and mac80211 can request TX while in
                 * power save mode. Need to wake up hardware for the TX to be
@@ -1126,12 +1123,21 @@ static void ath9k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
                }
                /*
                 * The actual restore operation will happen only after
-                * the sc_flags bit is cleared. We are just dropping
+                * the ps_flags bit is cleared. We are just dropping
                 * the ps_usecount here.
                 */
                ath9k_ps_restore(sc);
        }
 
+       /*
+        * Cannot tx while the hardware is in full sleep, it first needs a full
+        * chip reset to recover from that
+        */
+       if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_FULL_SLEEP)) {
+               ath_err(common, "TX while HW is in FULL_SLEEP mode\n");
+               goto exit;
+       }
+
        memset(&txctl, 0, sizeof(struct ath_tx_control));
        txctl.txq = sc->tx.txq_map[skb_get_queue_mapping(skb)];
 
@@ -1528,6 +1534,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 static void ath9k_enable_ps(struct ath_softc *sc)
 {
        struct ath_hw *ah = sc->sc_ah;
+       struct ath_common *common = ath9k_hw_common(ah);
 
        sc->ps_enabled = true;
        if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
@@ -1537,11 +1544,13 @@ static void ath9k_enable_ps(struct ath_softc *sc)
                }
                ath9k_hw_setrxabort(ah, 1);
        }
+       ath_dbg(common, PS, "PowerSave enabled\n");
 }
 
 static void ath9k_disable_ps(struct ath_softc *sc)
 {
        struct ath_hw *ah = sc->sc_ah;
+       struct ath_common *common = ath9k_hw_common(ah);
 
        sc->ps_enabled = false;
        ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
@@ -1556,7 +1565,7 @@ static void ath9k_disable_ps(struct ath_softc *sc)
                        ath9k_hw_set_interrupts(ah);
                }
        }
-
+       ath_dbg(common, PS, "PowerSave disabled\n");
 }
 
 static int ath9k_config(struct ieee80211_hw *hw, u32 changed)