[PATCH] natsemi: Support oversized EEPROMs

The natsemi chip can have a larger EEPROM attached than it itself uses for
configuration.  This patch adds support for user space access to such an
EEPROM.

Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Cc: Tim Hockin <thockin@hockin.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 8d49998..7826afb 100644 (file)
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -226,7 +226,7 @@ static int full_duplex[MAX_UNITS];
                                 NATSEMI_PG1_NREGS)
 #define NATSEMI_REGS_VER       1 /* v1 added RFDR registers */
 #define NATSEMI_REGS_SIZE      (NATSEMI_NREGS * sizeof(u32))
-#define NATSEMI_EEPROM_SIZE    24 /* 12 16-bit values */
+#define NATSEMI_DEF_EEPROM_SIZE        24 /* 12 16-bit values */
 
 /* Buffer sizes:
  * The nic writes 32-bit values, even if the upper bytes of
@@ -714,6 +714,8 @@ struct netdev_private {
        unsigned int iosize;
        spinlock_t lock;
        u32 msg_enable;
+       /* EEPROM data */
+       int eeprom_size;
 };
 
 static void move_int_phy(struct net_device *dev, int addr);
@@ -890,6 +892,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev,
        np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG;
        np->hands_off = 0;
        np->intr_status = 0;
+       np->eeprom_size = NATSEMI_DEF_EEPROM_SIZE;
 
        /* Initial port:
         * - If the nic was configured to use an external phy and if find_mii
@@ -2582,7 +2585,8 @@ static int get_regs_len(struct net_device *dev)
 
 static int get_eeprom_len(struct net_device *dev)
 {
-       return NATSEMI_EEPROM_SIZE;
+       struct netdev_private *np = netdev_priv(dev);
+       return np->eeprom_size;
 }
 
 static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
@@ -2669,15 +2673,20 @@ static u32 get_link(struct net_device *dev)
 static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
 {
        struct netdev_private *np = netdev_priv(dev);
-       u8 eebuf[NATSEMI_EEPROM_SIZE];
+       u8 *eebuf;
        int res;
 
+       eebuf = kmalloc(np->eeprom_size, GFP_KERNEL);
+       if (!eebuf)
+               return -ENOMEM;
+
        eeprom->magic = PCI_VENDOR_ID_NS | (PCI_DEVICE_ID_NS_83815<<16);
        spin_lock_irq(&np->lock);
        res = netdev_get_eeprom(dev, eebuf);
        spin_unlock_irq(&np->lock);
        if (!res)
                memcpy(data, eebuf+eeprom->offset, eeprom->len);
+       kfree(eebuf);
        return res;
 }
 
@@ -3033,9 +3042,10 @@ static int netdev_get_eeprom(struct net_device *dev, u8 *buf)
        int i;
        u16 *ebuf = (u16 *)buf;
        void __iomem * ioaddr = ns_ioaddr(dev);
+       struct netdev_private *np = netdev_priv(dev);
 
        /* eeprom_read reads 16 bits, and indexes by 16 bits */
-       for (i = 0; i < NATSEMI_EEPROM_SIZE/2; i++) {
+       for (i = 0; i < np->eeprom_size/2; i++) {
                ebuf[i] = eeprom_read(ioaddr, i);
                /* The EEPROM itself stores data bit-swapped, but eeprom_read
                 * reads it back "sanely". So we swap it back here in order to