pch_can: Move MSI processing to probe/remove processing

Currently, in case this driver is integrated as module, and when this
module is re-installed, no interrupts is to be occurred.
For the above issue, move MSI processing to open/release processing.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index a1fd3be..ace1fe7 100644 (file)
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -845,15 +845,6 @@ static int pch_can_open(struct net_device *ndev)
        struct pch_can_priv *priv = netdev_priv(ndev);
        int retval;
 
-       retval = pci_enable_msi(priv->dev);
-       if (retval) {
-               netdev_err(ndev, "PCH CAN opened without MSI\n");
-               priv->use_msi = 0;
-       } else {
-               netdev_err(ndev, "PCH CAN opened with MSI\n");
-               priv->use_msi = 1;
-       }
-
        /* Regstering the interrupt. */
        retval = request_irq(priv->dev->irq, pch_can_interrupt, IRQF_SHARED,
                             ndev->name, ndev);
@@ -879,9 +870,6 @@ static int pch_can_open(struct net_device *ndev)
 err_open_candev:
        free_irq(priv->dev->irq, ndev);
 req_irq_err:
-       if (priv->use_msi)
-               pci_disable_msi(priv->dev);
-
        pch_can_release(priv);
 
        return retval;
@@ -895,8 +883,6 @@ static int pch_close(struct net_device *ndev)
        napi_disable(&priv->napi);
        pch_can_release(priv);
        free_irq(priv->dev->irq, ndev);
-       if (priv->use_msi)
-               pci_disable_msi(priv->dev);
        close_candev(ndev);
        priv->can.state = CAN_STATE_STOPPED;
        return 0;
@@ -975,12 +961,14 @@ static void __devexit pch_can_remove(struct pci_dev *pdev)
        struct pch_can_priv *priv = netdev_priv(ndev);
 
        unregister_candev(priv->ndev);
-       free_candev(priv->ndev);
        pci_iounmap(pdev, priv->regs);
+       if (priv->use_msi)
+               pci_disable_msi(priv->dev);
        pci_release_regions(pdev);
        pci_disable_device(pdev);
        pci_set_drvdata(pdev, NULL);
        pch_can_reset(priv);
+       free_candev(priv->ndev);
 }
 
 #ifdef CONFIG_PM
@@ -1244,6 +1232,15 @@ static int __devinit pch_can_probe(struct pci_dev *pdev,
 
        netif_napi_add(ndev, &priv->napi, pch_can_poll, PCH_RX_OBJ_END);
 
+       rc = pci_enable_msi(priv->dev);
+       if (rc) {
+               netdev_err(ndev, "PCH CAN opened without MSI\n");
+               priv->use_msi = 0;
+       } else {
+               netdev_err(ndev, "PCH CAN opened with MSI\n");
+               priv->use_msi = 1;
+       }
+
        rc = register_candev(ndev);
        if (rc) {
                dev_err(&pdev->dev, "Failed register_candev %d\n", rc);
@@ -1253,6 +1250,8 @@ static int __devinit pch_can_probe(struct pci_dev *pdev,
        return 0;
 
 probe_exit_reg_candev:
+       if (priv->use_msi)
+               pci_disable_msi(priv->dev);
        free_candev(ndev);
 probe_exit_alloc_candev:
        pci_iounmap(pdev, addr);