* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (113 commits)
omap4: Add support for i2c init
omap: Fix i2c platform init code for omap4
OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y
OMAP powerdomain, hwmod, omap_device: add some credits
OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains
OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate
OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains
OMAP: timers: Fix clock source names for OMAP4
OMAP4 clock: Support clk_set_parent
OMAP4: PRCM: Add offset defines for all CM registers
OMAP4: PRCM: Add offset defines for all PRM registers
OMAP4: PRCM: Remove duplicate definition of base addresses
OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
OMAP4: CM: Remove non-functional registers in ES1.0
OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
OMAP: hwmod: Rename hwmod name for the MPU
OMAP: hwmod: Do not exit the iteration if one clock init failed
OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed
OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value
OMAP: hwmod: Fix wrong pointer iteration in oh->slaves
...
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_TI_HECC=y
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+CONFIG_TREE_PREEMPT_RCU=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# Block layer
#
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
#
# IO Schedulers
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_AMS_DELTA=y
# CONFIG_GAMEPORT is not set
#
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
#
# Display device support
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb 4 15:42:56 2010
+# Linux kernel version: 2.6.34-rc2
+# Wed Mar 24 13:27:25 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
#
# TI OMAP Implementations
# OMAP Feature Selections
#
# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
# CONFIG_OMAP_PM_NONE is not set
CONFIG_OMAP_PM_NOOP=y
CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
#
# OMAP Board Type
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=4
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2=y
CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
CONFIG_FB_OMAP2_NUM_FBS=3
#
#
CONFIG_PANEL_GENERIC=y
# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-CONFIG_PANEL_INNOLUX_AT070TN83=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-CONFIG_HIDRAW=y
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
-CONFIG_USB_HIDDEV=y
+# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
-CONFIG_HID_EZKEY=y
+# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
-CONFIG_HID_GYRATION=y
+# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
#
# OMAP 343x high speed USB support
#
-CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_INVENTRA_DMA=y
# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
+CONFIG_USB_MUSB_DEBUG=y
#
# USB Device Class drivers
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_ETH_EEM=y
-CONFIG_USB_GADGETFS=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
-CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc5
-# Tue Jan 26 11:05:31 2010
+# Linux kernel version: 2.6.34-rc7
+# Thu May 13 10:54:43 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_OPROFILE_ARMV6=y
CONFIG_OPROFILE_ARM11_CORE=y
CONFIG_OPROFILE_ARMV7=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
+CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
#
# TI OMAP Implementations
# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
# CONFIG_OMAP_PM_NONE is not set
# OMAP Core Type
#
CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
+CONFIG_ARCH_OMAP2430=y
CONFIG_ARCH_OMAP3430=y
CONFIG_OMAP_PACKAGE_CBB=y
CONFIG_OMAP_PACKAGE_CUS=y
CONFIG_MACH_OMAP2_TUSB6010=y
CONFIG_MACH_OMAP_H4=y
CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_MACH_OMAP_2430SDP is not set
+CONFIG_MACH_OMAP_2430SDP=y
CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_DEVKIT8000=y
CONFIG_MACH_OMAP_LDP=y
CONFIG_MACH_OVERO=y
CONFIG_MACH_OMAP3EVM=y
CONFIG_MACH_OMAP_ZOOM3=y
CONFIG_MACH_CM_T35=y
CONFIG_MACH_IGEP0020=y
+CONFIG_MACH_SBC3530=y
CONFIG_MACH_OMAP_3630SDP=y
CONFIG_MACH_OMAP_4430SDP=y
# CONFIG_OMAP3_EMU is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_CACHE_L2X0=y
CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
+# CONFIG_PL310_ERRATA_588369 is not set
CONFIG_ARM_GIC=y
CONFIG_COMMON_CLKDEV=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
+CONFIG_HW_PERF_EVENTS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
+# CONFIG_TI_DAVINCI_EMAC is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
CONFIG_LIBERTAS_SDIO=y
# CONFIG_LIBERTAS_SPI is not set
CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_MESH is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_WL12XX is not set
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_SIERRA_NET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
+# CONFIG_MAX63XX_WATCHDOG is not set
#
# USB-based Watchdog Cards
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
-# CONFIG_MENELAUS is not set
+CONFIG_MENELAUS=y
CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
+CONFIG_TWL4030_POWER=y
CONFIG_TWL4030_CODEC=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_DUMMY is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
# CONFIG_MEDIA_SUPPORT is not set
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
-CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP is not set
CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_FB_OMAP_031M3R is not set
-# CONFIG_FB_OMAP_048M3R is not set
-CONFIG_FB_OMAP_079M3R=y
-# CONFIG_FB_OMAP_092M9R is not set
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
# CONFIG_OMAP2_DSS is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
+#
+# OMAP 243x high speed USB support
+#
+
#
# OMAP 343x high speed USB support
#
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL92330=y
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
#
# CONFIG_STAGING is not set
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
#
# File systems
#
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34-rc7
+# Mon May 17 16:57:28 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+CONFIG_MACH_SBC3530=y
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_OMAP2 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_OMAP2_DSS is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Sun Dec 6 23:37:45 2009
+# Linux kernel version: 2.6.34-rc7
+# Wed May 12 12:26:05 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
#
# TI OMAP Implementations
#
# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
# CONFIG_ARCH_OMAP2 is not set
# CONFIG_ARCH_OMAP3 is not set
CONFIG_ARCH_OMAP4=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
# CONFIG_OMAP_PM_NONE is not set
CONFIG_OMAP_PM_NOOP=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
CONFIG_CACHE_L2X0=y
CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_GIC=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_LEDS is not set
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_KS8851=y
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_TWL4030 is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_TWL4030_CODEC is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
Support for the Amstrad E3 (codename Delta) videophone. Say Y here
if you have such a device.
+config AMS_DELTA_FIQ
+ bool "Fast Interrupt Request (FIQ) support for the E3"
+ depends on MACH_AMS_DELTA
+ select FIQ
+ help
+ Provide a FIQ handler for the E3.
+ This allows for fast handling of interrupts generated
+ by the clock line of the E3 mailboard (or a PS/2 keyboard)
+ connected to the GPIO based external keyboard port.
+
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o
obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o
obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o
+obj-$(CONFIG_AMS_DELTA_FIQ) += ams-delta-fiq.o ams-delta-fiq-handler.o
obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o
obj-$(CONFIG_MACH_HERALD) += board-htcherald.o
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+ *
+ * Based on linux/arch/arm/lib/floppydma.S
+ * Renamed and modified to work with 2.6 kernel by Matt Callow
+ * Copyright (C) 1995, 1996 Russell King
+ * Copyright (C) 2004 Pete Trapps
+ * Copyright (C) 2006 Matt Callow
+ * Copyright (C) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#include <plat/io.h>
+#include <plat/board-ams-delta.h>
+
+#include <mach/ams-delta-fiq.h>
+
+/*
+ * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
+ * Unfortunately, those were not placed in a separate header file.
+ */
+#define OMAP1510_GPIO_BASE 0xFFFCE000
+#define OMAP1510_GPIO_DATA_INPUT 0x00
+#define OMAP1510_GPIO_DATA_OUTPUT 0x04
+#define OMAP1510_GPIO_DIR_CONTROL 0x08
+#define OMAP1510_GPIO_INT_CONTROL 0x0c
+#define OMAP1510_GPIO_INT_MASK 0x10
+#define OMAP1510_GPIO_INT_STATUS 0x14
+#define OMAP1510_GPIO_PIN_CONTROL 0x18
+
+/* GPIO register bitmasks */
+#define KEYBRD_DATA_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA)
+#define KEYBRD_CLK_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK)
+#define MODEM_IRQ_MASK (0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ)
+#define HOOK_SWITCH_MASK (0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH)
+#define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
+
+/* IRQ handler register bitmasks */
+#define DEFERRED_FIQ_MASK (0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
+#define GPIO_BANK1_MASK (0x1 << INT_GPIO_BANK1)
+
+/* Driver buffer byte offsets */
+#define BUF_MASK (FIQ_MASK * 4)
+#define BUF_STATE (FIQ_STATE * 4)
+#define BUF_KEYS_CNT (FIQ_KEYS_CNT * 4)
+#define BUF_TAIL_OFFSET (FIQ_TAIL_OFFSET * 4)
+#define BUF_HEAD_OFFSET (FIQ_HEAD_OFFSET * 4)
+#define BUF_BUF_LEN (FIQ_BUF_LEN * 4)
+#define BUF_KEY (FIQ_KEY * 4)
+#define BUF_MISSED_KEYS (FIQ_MISSED_KEYS * 4)
+#define BUF_BUFFER_START (FIQ_BUFFER_START * 4)
+#define BUF_GPIO_INT_MASK (FIQ_GPIO_INT_MASK * 4)
+#define BUF_KEYS_HICNT (FIQ_KEYS_HICNT * 4)
+#define BUF_IRQ_PEND (FIQ_IRQ_PEND * 4)
+#define BUF_SIR_CODE_L1 (FIQ_SIR_CODE_L1 * 4)
+#define BUF_SIR_CODE_L2 (IRQ_SIR_CODE_L2 * 4)
+#define BUF_CNT_INT_00 (FIQ_CNT_INT_00 * 4)
+#define BUF_CNT_INT_KEY (FIQ_CNT_INT_KEY * 4)
+#define BUF_CNT_INT_MDM (FIQ_CNT_INT_MDM * 4)
+#define BUF_CNT_INT_03 (FIQ_CNT_INT_03 * 4)
+#define BUF_CNT_INT_HSW (FIQ_CNT_INT_HSW * 4)
+#define BUF_CNT_INT_05 (FIQ_CNT_INT_05 * 4)
+#define BUF_CNT_INT_06 (FIQ_CNT_INT_06 * 4)
+#define BUF_CNT_INT_07 (FIQ_CNT_INT_07 * 4)
+#define BUF_CNT_INT_08 (FIQ_CNT_INT_08 * 4)
+#define BUF_CNT_INT_09 (FIQ_CNT_INT_09 * 4)
+#define BUF_CNT_INT_10 (FIQ_CNT_INT_10 * 4)
+#define BUF_CNT_INT_11 (FIQ_CNT_INT_11 * 4)
+#define BUF_CNT_INT_12 (FIQ_CNT_INT_12 * 4)
+#define BUF_CNT_INT_13 (FIQ_CNT_INT_13 * 4)
+#define BUF_CNT_INT_14 (FIQ_CNT_INT_14 * 4)
+#define BUF_CNT_INT_15 (FIQ_CNT_INT_15 * 4)
+#define BUF_CIRC_BUFF (FIQ_CIRC_BUFF * 4)
+
+
+/*
+ * Register useage
+ * r8 - temporary
+ * r9 - the driver buffer
+ * r10 - temporary
+ * r11 - interrupts mask
+ * r12 - base pointers
+ * r13 - interrupts status
+ */
+
+ .text
+
+ .global qwerty_fiqin_end
+
+ENTRY(qwerty_fiqin_start)
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ FIQ intrrupt handler
+ ldr r12, omap_ih1_base @ set pointer to level1 handler
+
+ ldr r11, [r12, #IRQ_MIR_REG_OFFSET] @ fetch interrupts mask
+
+ ldr r13, [r12, #IRQ_ITR_REG_OFFSET] @ fetch interrupts status
+ bics r13, r13, r11 @ clear masked - any left?
+ beq exit @ none - spurious FIQ? exit
+
+ ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET] @ get requested interrupt number
+
+ mov r8, #2 @ reset FIQ agreement
+ str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
+
+ cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt?
+ beq gpio @ yes - process it
+
+ mov r8, #1
+ orr r8, r11, r8, lsl r10 @ mask spurious interrupt
+ str r8, [r12, #IRQ_MIR_REG_OFFSET]
+exit:
+ subs pc, lr, #4 @ return from FIQ
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@
+gpio: @ GPIO bank interrupt handler
+ ldr r12, omap1510_gpio_base @ set base pointer to GPIO bank
+
+ ldr r11, [r12, #OMAP1510_GPIO_INT_MASK] @ fetch GPIO interrupts mask
+restart:
+ ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ fetch status bits
+ bics r13, r13, r11 @ clear masked - any left?
+ beq exit @ no - spurious interrupt? exit
+
+ orr r11, r11, r13 @ mask all requested interrupts
+ str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+
+ ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set?
+ beq hksw @ no - try next source
+
+
+ @@@@@@@@@@@@@@@@@@@@@@
+ @ Keyboard clock FIQ mode interrupt handler
+ @ r10 now contains KEYBRD_CLK_MASK, use it
+ str r10, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack the interrupt
+ bic r11, r11, r10 @ unmask it
+ str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+
+ @ Process keyboard data
+ ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT] @ fetch GPIO input
+
+ ldr r10, [r9, #BUF_STATE] @ fetch kbd interface state
+ cmp r10, #0 @ are we expecting start bit?
+ bne data @ no - go to data processing
+
+ ands r8, r8, #KEYBRD_DATA_MASK @ check start bit - detected?
+ beq hksw @ no - try next source
+
+ @ r8 contains KEYBRD_DATA_MASK, use it
+ str r8, [r9, #BUF_STATE] @ enter data processing state
+ @ r10 already contains 0, reuse it
+ str r10, [r9, #BUF_KEY] @ clear keycode
+ mov r10, #2 @ reset input bit mask
+ str r10, [r9, #BUF_MASK]
+
+ @ Mask other GPIO line interrupts till key done
+ str r11, [r9, #BUF_GPIO_INT_MASK] @ save mask for later restore
+ mvn r11, #KEYBRD_CLK_MASK @ prepare all except kbd mask
+ str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ store into the mask register
+
+ b restart @ restart
+
+data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask
+
+ @ r8 still contains GPIO input bits
+ ands r8, r8, #KEYBRD_DATA_MASK @ is keyboard data line low?
+ ldreq r8, [r9, #BUF_KEY] @ yes - fetch collected so far,
+ orreq r8, r8, r10 @ set 1 at current mask position
+ streq r8, [r9, #BUF_KEY] @ and save back
+
+ mov r10, r10, lsl #1 @ shift mask left
+ bics r10, r10, #0x800 @ have we got all the bits?
+ strne r10, [r9, #BUF_MASK] @ not yet - store the mask
+ bne restart @ and restart
+
+ @ r10 already contains 0, reuse it
+ str r10, [r9, #BUF_STATE] @ reset state to start
+
+ @ Key done - restore interrupt mask
+ ldr r10, [r9, #BUF_GPIO_INT_MASK] @ fetch saved mask
+ and r11, r11, r10 @ unmask all saved as unmasked
+ str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ restore into the mask register
+
+ @ Try appending the keycode to the circular buffer
+ ldr r10, [r9, #BUF_KEYS_CNT] @ get saved keystrokes count
+ ldr r8, [r9, #BUF_BUF_LEN] @ get buffer size
+ cmp r10, r8 @ is buffer full?
+ beq hksw @ yes - key lost, next source
+
+ add r10, r10, #1 @ incremet keystrokes counter
+ str r10, [r9, #BUF_KEYS_CNT]
+
+ ldr r10, [r9, #BUF_TAIL_OFFSET] @ get buffer tail offset
+ @ r8 already contains buffer size
+ cmp r10, r8 @ end of buffer?
+ moveq r10, #0 @ yes - rewind to buffer start
+
+ ldr r12, [r9, #BUF_BUFFER_START] @ get buffer start address
+ add r12, r12, r10, LSL #2 @ calculate buffer tail address
+ ldr r8, [r9, #BUF_KEY] @ get last keycode
+ str r8, [r12] @ append it to the buffer tail
+
+ add r10, r10, #1 @ increment buffer tail offset
+ str r10, [r9, #BUF_TAIL_OFFSET]
+
+ ldr r10, [r9, #BUF_CNT_INT_KEY] @ increment interrupts counter
+ add r10, r10, #1
+ str r10, [r9, #BUF_CNT_INT_KEY]
+ @@@@@@@@@@@@@@@@@@@@@@@@
+
+
+hksw: @Is hook switch interrupt requested?
+ tst r13, #HOOK_SWITCH_MASK @ is hook switch status bit set?
+ beq mdm @ no - try next source
+
+
+ @@@@@@@@@@@@@@@@@@@@@@@@
+ @ Hook switch interrupt FIQ mode simple handler
+
+ @ Don't toggle active edge, the switch always bounces
+
+ @ Increment hook switch interrupt counter
+ ldr r10, [r9, #BUF_CNT_INT_HSW]
+ add r10, r10, #1
+ str r10, [r9, #BUF_CNT_INT_HSW]
+ @@@@@@@@@@@@@@@@@@@@@@@@
+
+
+mdm: @Is it a modem interrupt?
+ tst r13, #MODEM_IRQ_MASK @ is modem status bit set?
+ beq irq @ no - check for next interrupt
+
+
+ @@@@@@@@@@@@@@@@@@@@@@@@
+ @ Modem FIQ mode interrupt handler stub
+
+ @ Increment modem interrupt counter
+ ldr r10, [r9, #BUF_CNT_INT_MDM]
+ add r10, r10, #1
+ str r10, [r9, #BUF_CNT_INT_MDM]
+ @@@@@@@@@@@@@@@@@@@@@@@@
+
+
+irq: @ Place deferred_fiq interrupt request
+ ldr r12, deferred_fiq_ih_base @ set pointer to IRQ handler
+ mov r10, #DEFERRED_FIQ_MASK @ set deferred_fiq bit
+ str r10, [r12, #IRQ_ISR_REG_OFFSET] @ place it in the ISR register
+
+ ldr r12, omap1510_gpio_base @ set pointer back to GPIO bank
+ b restart @ check for next GPIO interrupt
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+/*
+ * Virtual addresses for IO
+ */
+omap_ih1_base:
+ .word OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
+deferred_fiq_ih_base:
+ .word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE)
+omap1510_gpio_base:
+ .word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE)
+qwerty_fiqin_end:
+
+/*
+ * Check the size of the FIQ,
+ * it cannot go beyond 0xffff0200, and is copied to 0xffff001c
+ */
+.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c)
+ .err
+.endif
--- /dev/null
+/*
+ * Amstrad E3 FIQ handling
+ *
+ * Copyright (C) 2009 Janusz Krzysztofik
+ * Copyright (c) 2006 Matt Callow
+ * Copyright (c) 2004 Amstrad Plc
+ * Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c
+ * in the MontaVista 2.4 kernel (and the Amstrad changes therein)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <plat/board-ams-delta.h>
+
+#include <asm/fiq.h>
+#include <mach/ams-delta-fiq.h>
+
+static struct fiq_handler fh = {
+ .name = "ams-delta-fiq"
+};
+
+/*
+ * This buffer is shared between FIQ and IRQ contexts.
+ * The FIQ and IRQ isrs can both read and write it.
+ * It is structured as a header section several 32bit slots,
+ * followed by the circular buffer where the FIQ isr stores
+ * keystrokes received from the qwerty keyboard.
+ * See ams-delta-fiq.h for details of offsets.
+ */
+unsigned int fiq_buffer[1024];
+EXPORT_SYMBOL(fiq_buffer);
+
+static unsigned int irq_counter[16];
+
+static irqreturn_t deferred_fiq(int irq, void *dev_id)
+{
+ struct irq_desc *irq_desc;
+ struct irq_chip *irq_chip = NULL;
+ int gpio, irq_num, fiq_count;
+
+ irq_desc = irq_to_desc(IH_GPIO_BASE);
+ if (irq_desc)
+ irq_chip = irq_desc->chip;
+
+ /*
+ * For each handled GPIO interrupt, keep calling its interrupt handler
+ * until the IRQ counter catches the FIQ incremented interrupt counter.
+ */
+ for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK;
+ gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) {
+ irq_num = gpio_to_irq(gpio);
+ fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
+
+ while (irq_counter[gpio] < fiq_count) {
+ if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
+ /*
+ * It looks like handle_edge_irq() that
+ * OMAP GPIO edge interrupts default to,
+ * expects interrupt already unmasked.
+ */
+ if (irq_chip && irq_chip->unmask)
+ irq_chip->unmask(irq_num);
+ }
+ generic_handle_irq(irq_num);
+
+ irq_counter[gpio]++;
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+void __init ams_delta_init_fiq(void)
+{
+ void *fiqhandler_start;
+ unsigned int fiqhandler_length;
+ struct pt_regs FIQ_regs;
+ unsigned long val, offset;
+ int i, retval;
+
+ fiqhandler_start = &qwerty_fiqin_start;
+ fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start;
+ pr_info("Installing fiq handler from %p, length 0x%x\n",
+ fiqhandler_start, fiqhandler_length);
+
+ retval = claim_fiq(&fh);
+ if (retval) {
+ pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n",
+ retval);
+ return;
+ }
+
+ retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
+ IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0);
+ if (retval < 0) {
+ pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
+ release_fiq(&fh);
+ return;
+ }
+ /*
+ * Since no set_type() method is provided by OMAP irq chip,
+ * switch to edge triggered interrupt type manually.
+ */
+ offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4;
+ val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
+ omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
+
+ set_fiq_handler(fiqhandler_start, fiqhandler_length);
+
+ /*
+ * Initialise the buffer which is shared
+ * between FIQ mode and IRQ mode
+ */
+ fiq_buffer[FIQ_GPIO_INT_MASK] = 0;
+ fiq_buffer[FIQ_MASK] = 0;
+ fiq_buffer[FIQ_STATE] = 0;
+ fiq_buffer[FIQ_KEY] = 0;
+ fiq_buffer[FIQ_KEYS_CNT] = 0;
+ fiq_buffer[FIQ_KEYS_HICNT] = 0;
+ fiq_buffer[FIQ_TAIL_OFFSET] = 0;
+ fiq_buffer[FIQ_HEAD_OFFSET] = 0;
+ fiq_buffer[FIQ_BUF_LEN] = 256;
+ fiq_buffer[FIQ_MISSED_KEYS] = 0;
+ fiq_buffer[FIQ_BUFFER_START] =
+ (unsigned int) &fiq_buffer[FIQ_CIRC_BUFF];
+
+ for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++)
+ fiq_buffer[i] = 0;
+
+ /*
+ * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr
+ * will run in an unpredictable context. The fiq_buffer is the FIQ isr's
+ * only means of communication with the IRQ level and other kernel
+ * context code.
+ */
+ FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer;
+ set_fiq_regs(&FIQ_regs);
+
+ pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer);
+
+ /*
+ * Redirect GPIO interrupts to FIQ
+ */
+ offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4;
+ val = omap_readl(OMAP_IH1_BASE + offset) | 1;
+ omap_writel(val, OMAP_IH1_BASE + offset);
+}
#include <plat/board.h>
#include <plat/common.h>
+#include <mach/ams-delta-fiq.h>
+
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;
omap_usb_init(&ams_delta_usb_config);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+#ifdef CONFIG_AMS_DELTA_FIQ
+ ams_delta_init_fiq();
+#endif
+
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
}
static int __init ams_delta_modem_init(void)
{
+ int err;
+
omap_cfg_reg(M14_1510_GPIO2);
- ams_delta_modem_ports[0].irq = gpio_to_irq(2);
+ ams_delta_modem_ports[0].irq =
+ gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+
+ err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
+ if (err) {
+ pr_err("Couldn't request gpio pin for modem\n");
+ return err;
+ }
+ gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
ams_delta_latch2_write(
AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
#ifdef CONFIG_OMAP_RESET_CLOCKS
-void __init omap1_clk_disable_unused(struct clk *clk)
+void omap1_clk_disable_unused(struct clk *clk)
{
__u32 regval32;
extern unsigned long omap1_watchdog_recalc(struct clk *clk);
#ifdef CONFIG_OMAP_RESET_CLOCKS
-extern void __init omap1_clk_disable_unused(struct clk *clk);
+extern void omap1_clk_disable_unused(struct clk *clk);
#else
#define omap1_clk_disable_unused NULL
#endif
--- /dev/null
+/*
+ * arch/arm/mach-omap1/include/ams-delta-fiq.h
+ *
+ * Taken from the original Amstrad modifications to fiq.h
+ *
+ * Copyright (c) 2004 Amstrad Plc
+ * Copyright (c) 2006 Matt Callow
+ * Copyright (c) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __AMS_DELTA_FIQ_H
+#define __AMS_DELTA_FIQ_H
+
+#include <plat/irqs.h>
+
+/*
+ * Interrupt number used for passing control from FIQ to IRQ.
+ * IRQ12, described as reserved, has been selected.
+ */
+#define INT_DEFERRED_FIQ INT_1510_RES12
+/*
+ * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to.
+ */
+#if (INT_DEFERRED_FIQ < IH2_BASE)
+#define DEFERRED_FIQ_IH_BASE OMAP_IH1_BASE
+#else
+#define DEFERRED_FIQ_IH_BASE OMAP_IH2_BASE
+#endif
+
+/*
+ * These are the offsets from the begining of the fiq_buffer. They are put here
+ * since the buffer and header need to be accessed by drivers servicing devices
+ * which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
+ */
+#define FIQ_MASK 0
+#define FIQ_STATE 1
+#define FIQ_KEYS_CNT 2
+#define FIQ_TAIL_OFFSET 3
+#define FIQ_HEAD_OFFSET 4
+#define FIQ_BUF_LEN 5
+#define FIQ_KEY 6
+#define FIQ_MISSED_KEYS 7
+#define FIQ_BUFFER_START 8
+#define FIQ_GPIO_INT_MASK 9
+#define FIQ_KEYS_HICNT 10
+#define FIQ_IRQ_PEND 11
+#define FIQ_SIR_CODE_L1 12
+#define IRQ_SIR_CODE_L2 13
+
+#define FIQ_CNT_INT_00 14
+#define FIQ_CNT_INT_KEY 15
+#define FIQ_CNT_INT_MDM 16
+#define FIQ_CNT_INT_03 17
+#define FIQ_CNT_INT_HSW 18
+#define FIQ_CNT_INT_05 19
+#define FIQ_CNT_INT_06 20
+#define FIQ_CNT_INT_07 21
+#define FIQ_CNT_INT_08 22
+#define FIQ_CNT_INT_09 23
+#define FIQ_CNT_INT_10 24
+#define FIQ_CNT_INT_11 25
+#define FIQ_CNT_INT_12 26
+#define FIQ_CNT_INT_13 27
+#define FIQ_CNT_INT_14 28
+#define FIQ_CNT_INT_15 29
+
+#define FIQ_CIRC_BUFF 30 /*Start of circular buffer */
+
+#ifndef __ASSEMBLER__
+extern unsigned int fiq_buffer[];
+extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end;
+
+extern void __init ams_delta_init_fiq(void);
+#endif
+
+#endif
#include <linux/serial_reg.h>
+#include <asm/memory.h>
+
#include <plat/serial.h>
.pushsection .data
cmp \rx, #0 @ is port configured?
bne 99f @ already configured
- /* Check 7XX UART1 scratchpad register for uart to use */
+ /* Check the debug UART configuration set in uncompress.h */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
- moveq \rx, #0xff000000 @ physical base address
- movne \rx, #0xfe000000 @ virtual base
- orr \rx, \rx, #0x00fb0000 @ OMAP1UART1
- ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)]
- cmp \rx, #0 @ anything in 7XX scratchpad?
- bne 10f @ found 7XX uart
-
- /* Check 15xx/16xx UART1 scratchpad register for uart to use */
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0xff000000 @ physical base address
- movne \rx, #0xfe000000 @ virtual base
- orr \rx, \rx, #0x00fb0000 @ OMAP1UART1
- ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)]
+ ldreq \rx, =OMAP_UART_INFO
+ ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
+ ldr \rx, [\rx, #0]
/* Select the UART to use based on the UART1 scratchpad value */
10: cmp \rx, #0 @ no port configured?
config ARCH_OMAP2430
bool "OMAP2430 support"
depends on ARCH_OMAP2
+ select ARCH_OMAP_OTG
config ARCH_OMAP3430
bool "OMAP3430 support"
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
+config MACH_SBC3530
+ bool "OMAP3 SBC STALKER board"
+ depends on ARCH_OMAP3
+ select OMAP_PACKAGE_CUS
+ select OMAP_MUX
+
config MACH_OMAP_3630SDP
bool "OMAP3630 SDP board"
depends on ARCH_OMAP3
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
-obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o
+obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
-iommu-y += iommu2.o
-iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o
-
-obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y)
+obj-$(CONFIG_OMAP_IOMMU) := iommu2.o omap-iommu.o
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
hsmmc.o
-obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
+obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
+obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
+ hsmmc.o
# Platform specific device init code
obj-y += usb-musb.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
},
};
+static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("isp1301_omap", 0x2D),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = OMAP_GPIO_IRQ(78),
+ },
+};
+
static int __init omap2430_i2c_init(void)
{
- omap_register_i2c_bus(1, 400, NULL, 0);
+ omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
+ ARRAY_SIZE(sdp2430_i2c1_boardinfo));
omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo,
ARRAY_SIZE(sdp2430_i2c_boardinfo));
return 0;
.mode = MUSB_OTG,
.power = 100,
};
+static struct omap_usb_config sdp2430_usb_config __initdata = {
+ .otg = 1,
+#ifdef CONFIG_USB_GADGET_OMAP
+ .hmc_mode = 0x0,
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ .hmc_mode = 0x1,
+#endif
+ .pins[0] = 3,
+};
static void __init omap_2430sdp_init(void)
{
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
omap2_hsmmc_init(mmc);
+ omap_usb_init(&sdp2430_usb_config);
usb_musb_init(&musb_board_data);
board_smc91x_init();
static struct ads7846_platform_data tsc2046_config __initdata = {
.get_pendown_state = ads7846_get_pendown_state,
.keep_vref_on = 1,
+ .wakeup = true,
};
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
#include <mach/hardware.h>
+#include <mach/omap4-common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/control.h>
#include <plat/timer-gp.h>
#include <plat/usb.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <plat/mmc.h>
+#include "hsmmc.h"
+
+#define ETH_KS8851_IRQ 34
+#define ETH_KS8851_POWER_ON 48
+#define ETH_KS8851_QUART 138
+
+static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
+ {
+ .modalias = "ks8851",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 24000000,
+ .irq = ETH_KS8851_IRQ,
+ },
+};
+
+static int omap_ethernet_init(void)
+{
+ int status;
+
+ /* Request of GPIO lines */
+
+ status = gpio_request(ETH_KS8851_POWER_ON, "eth_power");
+ if (status) {
+ pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON);
+ return status;
+ }
+
+ status = gpio_request(ETH_KS8851_QUART, "quart");
+ if (status) {
+ pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART);
+ goto error1;
+ }
+
+ status = gpio_request(ETH_KS8851_IRQ, "eth_irq");
+ if (status) {
+ pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ);
+ goto error2;
+ }
+
+ /* Configuration of requested GPIO lines */
+
+ status = gpio_direction_output(ETH_KS8851_POWER_ON, 1);
+ if (status) {
+ pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ);
+ goto error3;
+ }
+
+ status = gpio_direction_output(ETH_KS8851_QUART, 1);
+ if (status) {
+ pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART);
+ goto error3;
+ }
+
+ status = gpio_direction_input(ETH_KS8851_IRQ);
+ if (status) {
+ pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ);
+ goto error3;
+ }
+
+ return 0;
+
+error3:
+ gpio_free(ETH_KS8851_IRQ);
+error2:
+ gpio_free(ETH_KS8851_QUART);
+error1:
+ gpio_free(ETH_KS8851_POWER_ON);
+ return status;
+}
static struct platform_device sdp4430_lcd_device = {
.name = "sdp4430_lcd",
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
-#ifdef CONFIG_CACHE_L2X0
-static int __init omap_l2_cache_init(void)
-{
- extern void omap_smc1(u32 fn, u32 arg);
- void __iomem *l2cache_base;
-
- /* To avoid code running on other OMAPs in
- * multi-omap builds
- */
- if (!cpu_is_omap44xx())
- return -ENODEV;
-
- /* Static mapping, never released */
- l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
- BUG_ON(!l2cache_base);
-
- /* Enable PL310 L2 Cache controller */
- omap_smc1(0x102, 0x1);
-
- /* 32KB way size, 16-way associativity,
- * parity disabled
- */
- l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
-
- return 0;
-}
-early_initcall(omap_l2_cache_init);
-#endif
-
-static void __init gic_init_irq(void)
-{
- void __iomem *base;
-
- /* Static mapping, never released */
- base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
- BUG_ON(!base);
- gic_dist_init(0, base, 29);
-
- /* Static mapping, never released */
- gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
- BUG_ON(!gic_cpu_base_addr);
- gic_cpu_init(0, gic_cpu_base_addr);
-}
-
static void __init omap_4430sdp_init_irq(void)
{
omap_board_config = sdp4430_config;
.power = 100,
};
+static struct omap2_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 8,
+ .gpio_wp = -EINVAL,
+ },
+ {
+ .mmc = 2,
+ .wires = 8,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .nonremovable = true,
+ },
+ {} /* Terminator */
+};
+
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+ {
+ .supply = "vmmc",
+ .dev_name = "mmci-omap-hs.0",
+ },
+ {
+ .supply = "vmmc",
+ .dev_name = "mmci-omap-hs.1",
+ },
+};
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+ int ret = 0;
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+ /* Setting MMC1 Card detect Irq */
+ if (pdev->id == 0)
+ pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
+ MMCDETECT_INTR_OFFSET;
+ return ret;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+ struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+ pdata->init = omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+ struct omap2_hsmmc_info *c;
+
+ omap2_hsmmc_init(controllers);
+ for (c = controllers; c->mmc; c++)
+ omap4_twl6030_hsmmc_set_late_init(c->dev);
+
+ return 0;
+}
+
+static struct regulator_init_data sdp4430_vaux1 = {
+ .constraints = {
+ .min_uV = 1000000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_vaux2 = {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_vaux3 = {
+ .constraints = {
+ .min_uV = 1000000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data sdp4430_vmmc = {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 2,
+ .consumer_supplies = sdp4430_vmmc_supply,
+};
+
+static struct regulator_init_data sdp4430_vpp = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 2500000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_vusim = {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 2900000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_vana = {
+ .constraints = {
+ .min_uV = 2100000,
+ .max_uV = 2100000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_vcxio = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data sdp4430_vusb = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct twl4030_platform_data sdp4430_twldata = {
+ .irq_base = TWL6030_IRQ_BASE,
+ .irq_end = TWL6030_IRQ_END,
+
+ /* Regulators */
+ .vmmc = &sdp4430_vmmc,
+ .vpp = &sdp4430_vpp,
+ .vusim = &sdp4430_vusim,
+ .vana = &sdp4430_vana,
+ .vcxio = &sdp4430_vcxio,
+ .vdac = &sdp4430_vdac,
+ .vusb = &sdp4430_vusb,
+ .vaux1 = &sdp4430_vaux1,
+ .vaux2 = &sdp4430_vaux2,
+ .vaux3 = &sdp4430_vaux3,
+};
+
+static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl6030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = OMAP44XX_IRQ_SYS_1N,
+ .platform_data = &sdp4430_twldata,
+ },
+};
+static int __init omap4_i2c_init(void)
+{
+ /*
+ * Phoenix Audio IC needs I2C1 to
+ * start with 400 KHz or less
+ */
+ omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
+ ARRAY_SIZE(sdp4430_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ omap_register_i2c_bus(4, 400, NULL, 0);
+ return 0;
+}
static void __init omap_4430sdp_init(void)
{
+ int status;
+
+ omap4_i2c_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
+ omap4_twl6030_hsmmc_init(mmc);
/* OMAP4 SDP uses internal transceiver so register nop transceiver */
usb_nop_xceiv_register();
/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
if (!cpu_is_omap44xx())
usb_musb_init(&musb_board_data);
+
+ status = omap_ethernet_init();
+ if (status) {
+ pr_err("Ethernet initialization failed: %d\n", status);
+ } else {
+ sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
+ spi_register_board_info(sdp4430_spi_board_info,
+ ARRAY_SIZE(sdp4430_spi_board_info));
+ }
}
static void __init omap_4430sdp_map_io(void)
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/i2c/pca953x.h>
+#include <linux/can/platform/ti_hecc.h>
+#include <linux/davinci_emac.h>
#include <mach/hardware.h>
#include <mach/am35xx.h>
#include <plat/board.h>
#include <plat/common.h>
+#include <plat/control.h>
#include <plat/usb.h>
#include <plat/display.h>
#include "mux.h"
+#define AM35XX_EVM_PHY_MASK (0xF)
+#define AM35XX_EVM_MDIO_FREQUENCY (1000000)
+
+static struct emac_platform_data am3517_evm_emac_pdata = {
+ .phy_mask = AM35XX_EVM_PHY_MASK,
+ .mdio_max_freq = AM35XX_EVM_MDIO_FREQUENCY,
+ .rmii_en = 1,
+};
+
+static struct resource am3517_emac_resources[] = {
+ {
+ .start = AM35XX_IPSS_EMAC_BASE,
+ .end = AM35XX_IPSS_EMAC_BASE + 0x3FFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+ .end = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+ .end = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+ .end = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+ .end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device am3517_emac_device = {
+ .name = "davinci_emac",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(am3517_emac_resources),
+ .resource = am3517_emac_resources,
+};
+
+static void am3517_enable_ethernet_int(void)
+{
+ u32 regval;
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+ AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+ AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
+ AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+ omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am3517_disable_ethernet_int(void)
+{
+ u32 regval;
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+ AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+ omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
+{
+ unsigned int regval;
+
+ pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET;
+ pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET;
+ pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET;
+ pdata->mdio_reg_offset = AM35XX_EMAC_MDIO_OFFSET;
+ pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE;
+ pdata->version = EMAC_VERSION_2;
+ pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR;
+ pdata->interrupt_enable = am3517_enable_ethernet_int;
+ pdata->interrupt_disable = am3517_disable_ethernet_int;
+ am3517_emac_device.dev.platform_data = pdata;
+ platform_device_register(&am3517_emac_device);
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+ regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
+ omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+ regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+ return ;
+}
+
+
+
#define LCD_PANEL_PWR 176
#define LCD_PANEL_BKLIGHT_PWR 182
#define LCD_PANEL_PWM 181
-static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = {
+static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
{
I2C_BOARD_INFO("s35390a", 0x30),
.type = "s35390a",
gpio_free(GPIO_RTCS35390A_IRQ);
return;
}
- am3517evm_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
+ am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
}
/*
static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
.gpio_base = OMAP_MAX_GPIO_LINES,
};
-static struct i2c_board_info __initdata am3517evm_tca6416_info_0[] = {
+static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
{
I2C_BOARD_INFO("tca6416", 0x21),
.platform_data = &am3517evm_gpio_expander_info_0,
static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
.gpio_base = OMAP_MAX_GPIO_LINES + 32,
};
-static struct i2c_board_info __initdata am3517evm_ui_tca6416_info[] = {
+static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = {
{
I2C_BOARD_INFO("tca6416", 0x20),
.platform_data = &am3517evm_ui_gpio_expander_info_1,
static int __init am3517_evm_i2c_init(void)
{
omap_register_i2c_bus(1, 400, NULL, 0);
- omap_register_i2c_bus(2, 400, am3517evm_tca6416_info_0,
- ARRAY_SIZE(am3517evm_tca6416_info_0));
- omap_register_i2c_bus(3, 400, am3517evm_ui_tca6416_info,
- ARRAY_SIZE(am3517evm_ui_tca6416_info));
+ omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo,
+ ARRAY_SIZE(am3517evm_i2c2_boardinfo));
+ omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo,
+ ARRAY_SIZE(am3517evm_i2c3_boardinfo));
return 0;
}
static int lcd_enabled;
static int dvi_enabled;
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
static void __init am3517_evm_display_init(void)
{
int r;
err_1:
gpio_free(LCD_PANEL_BKLIGHT_PWR);
}
+#else
+static void __init am3517_evm_display_init(void) {}
+#endif
static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
{
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+#else
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+#endif
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
#define board_mux NULL
#endif
+
+static struct resource am3517_hecc_resources[] = {
+ {
+ .start = AM35XX_IPSS_HECC_BASE,
+ .end = AM35XX_IPSS_HECC_BASE + 0x3FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_35XX_HECC0_IRQ,
+ .end = INT_35XX_HECC0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device am3517_hecc_device = {
+ .name = "ti_hecc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(am3517_hecc_resources),
+ .resource = am3517_hecc_resources,
+};
+
+static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
+ .scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET,
+ .scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET,
+ .hecc_ram_offset = AM35XX_HECC_RAM_OFFSET,
+ .mbx_offset = AM35XX_HECC_MBOX_OFFSET,
+ .int_line = AM35XX_HECC_INT_LINE,
+ .version = AM35XX_HECC_VERSION,
+};
+
+static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
+{
+ am3517_hecc_device.dev.platform_data = pdata;
+ platform_device_register(&am3517_hecc_device);
+}
+
static void __init am3517_evm_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
usb_ehci_init(&ehci_pdata);
+ am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
/* DSS */
am3517_evm_display_init();
/* RTC - S35390A */
am3517_evm_rtc_init();
- i2c_register_board_info(1, am3517evm_i2c_boardinfo,
- ARRAY_SIZE(am3517evm_i2c_boardinfo));
+ i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
+ ARRAY_SIZE(am3517evm_i2c1_boardinfo));
+ /*Ethernet*/
+ am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
}
static void __init am3517_evm_map_io(void)
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/mcspi.h>
#include <mach/hardware.h>
.reset_gpio_port[2] = -EINVAL
};
+static struct omap_board_mux board_mux[] __initdata = {
+ /* nCS and IRQ for Devkit8000 ethernet */
+ OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0),
+ OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+ /* McSPI 2*/
+ OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+ /* PENDOWN GPIO */
+ OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
+ /* mUSB */
+ OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* USB 1 */
+ OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+
+ /* MMC 1 */
+ OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* McBSP 2 */
+ OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+ /* I2C 1 */
+ OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* I2C 2 */
+ OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* I2C 3 */
+ OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* I2C 4 */
+ OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* serial ports */
+ OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* DSS */
+ OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+ /* expansion port */
+ /* McSPI 1 */
+ OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+
+ /* HDQ */
+ OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* McSPI4 */
+ OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
+
+ /* MMC 2 */
+ OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+
+ /* I2C3 */
+ OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+ OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+ /* TPS IRQ */
+ OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
+ OMAP_PIN_INPUT_PULLUP),
+
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
static void __init devkit8000_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
omap_dm9000_init();
.get_pendown_state = ads7846_get_pendown_state,
.keep_vref_on = 1,
.settle_delay_usecs = 150,
+ .wakeup = true,
};
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
- OMAP_PIN_OFF_INPUT_PULLUP |
+ OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
OMAP_PIN_OFF_WAKEUPENABLE),
OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
- OMAP_PIN_OFF_INPUT_PULLUP |
- OMAP_PIN_OFF_WAKEUPENABLE),
+ OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Guangzhou EMA-Tech
+ *
+ * Modified from mach-omap2/board-omap3evm.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+#include <plat/display.h>
+
+#include <plat/mcspi.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c/at24.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mux.h"
+#include "hsmmc.h"
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#define OMAP3STALKER_ETHR_START 0x2c000000
+#define OMAP3STALKER_ETHR_SIZE 1024
+#define OMAP3STALKER_ETHR_GPIO_IRQ 19
+#define OMAP3STALKER_SMC911X_CS 5
+
+static struct resource omap3stalker_smsc911x_resources[] = {
+ [0] = {
+ .start = OMAP3STALKER_ETHR_START,
+ .end =
+ (OMAP3STALKER_ETHR_START + OMAP3STALKER_ETHR_SIZE - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ),
+ .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW),
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
+};
+
+static struct platform_device omap3stalker_smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap3stalker_smsc911x_resources),
+ .resource = &omap3stalker_smsc911x_resources[0],
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
+static inline void __init omap3stalker_init_eth(void)
+{
+ int eth_cs;
+ struct clk *l3ck;
+ unsigned int rate;
+
+ eth_cs = OMAP3STALKER_SMC911X_CS;
+
+ l3ck = clk_get(NULL, "l3_ck");
+ if (IS_ERR(l3ck))
+ rate = 100000000;
+ else
+ rate = clk_get_rate(l3ck);
+
+ omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
+ if (gpio_request(OMAP3STALKER_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+ printk(KERN_ERR
+ "Failed to request GPIO%d for smc911x IRQ\n",
+ OMAP3STALKER_ETHR_GPIO_IRQ);
+ return;
+ }
+
+ gpio_direction_input(OMAP3STALKER_ETHR_GPIO_IRQ);
+
+ platform_device_register(&omap3stalker_smsc911x_device);
+}
+
+#else
+static inline void __init omap3stalker_init_eth(void)
+{
+ return;
+}
+#endif
+
+/*
+ * OMAP3 DSS control signals
+ */
+
+#define DSS_ENABLE_GPIO 199
+#define LCD_PANEL_BKLIGHT_GPIO 210
+#define ENABLE_VPLL2_DEV_GRP 0xE0
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init omap3_stalker_display_init(void)
+{
+ return;
+}
+
+static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev)
+{
+ if (dvi_enabled) {
+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+ return -EINVAL;
+ }
+ gpio_set_value(DSS_ENABLE_GPIO, 1);
+ gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1);
+ lcd_enabled = 1;
+ return 0;
+}
+
+static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(DSS_ENABLE_GPIO, 0);
+ gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0);
+ lcd_enabled = 0;
+}
+
+static struct omap_dss_device omap3_stalker_lcd_device = {
+ .name = "lcd",
+ .driver_name = "generic_panel",
+ .phy.dpi.data_lines = 24,
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .platform_enable = omap3_stalker_enable_lcd,
+ .platform_disable = omap3_stalker_disable_lcd,
+};
+
+static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device omap3_stalker_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
+ .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
+#endif
+ .platform_enable = omap3_stalker_enable_tv,
+ .platform_disable = omap3_stalker_disable_tv,
+};
+
+static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+ gpio_set_value(DSS_ENABLE_GPIO, 1);
+ dvi_enabled = 1;
+ return 0;
+}
+
+static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(DSS_ENABLE_GPIO, 0);
+ dvi_enabled = 0;
+}
+
+static struct omap_dss_device omap3_stalker_dvi_device = {
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .platform_enable = omap3_stalker_enable_dvi,
+ .platform_disable = omap3_stalker_disable_dvi,
+};
+
+static struct omap_dss_device *omap3_stalker_dss_devices[] = {
+ &omap3_stalker_lcd_device,
+ &omap3_stalker_tv_device,
+ &omap3_stalker_dvi_device,
+};
+
+static struct omap_dss_board_info omap3_stalker_dss_data = {
+ .num_devices = ARRAY_SIZE(omap3_stalker_dss_devices),
+ .devices = omap3_stalker_dss_devices,
+ .default_device = &omap3_stalker_dvi_device,
+};
+
+static struct platform_device omap3_stalker_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3_stalker_dss_data,
+ },
+};
+
+static struct regulator_consumer_supply omap3stalker_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply omap3stalker_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3stalker_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3stalker_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data omap3stalker_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3stalker_vsim_supply,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = 23,
+ },
+ {} /* Terminator */
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+ {
+ .code = BTN_EXTRA,
+ .gpio = 18,
+ .desc = "user",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
+ },
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "stalker:D8:usr0",
+ .default_trigger = "default-on",
+ .gpio = 126,
+ },
+ {
+ .name = "stalker:D9:usr1",
+ .default_trigger = "default-on",
+ .gpio = 127,
+ },
+ {
+ .name = "stalker:D3:mmc0",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ .default_trigger = "mmc0",
+ },
+ {
+ .name = "stalker:D4:heartbeat",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ .default_trigger = "heartbeat",
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static int
+omap3stalker_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+ mmc[0].gpio_cd = gpio + 0;
+ omap2_hsmmc_init(mmc);
+
+ /* link regulators to MMC adapters */
+ omap3stalker_vmmc1_supply.dev = mmc[0].dev;
+ omap3stalker_vsim_supply.dev = mmc[0].dev;
+
+ /*
+ * Most GPIOs are for USB OTG. Some are mostly sent to
+ * the P2 connector; notably LEDA for the LCD backlight.
+ */
+
+ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
+ gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
+ gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+ /* gpio + 7 == DVI Enable */
+ gpio_request(gpio + 7, "EN_DVI");
+ gpio_direction_output(gpio + 7, 0);
+
+ /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+ /* GPIO + 13 == ledsync (out, heartbeat) */
+ gpio_leds[3].gpio = gpio + 13;
+
+ platform_device_register(&leds_gpio);
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .setup = omap3stalker_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3stalker_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static int board_keymap[] = {
+ KEY(0, 0, KEY_LEFT),
+ KEY(0, 1, KEY_DOWN),
+ KEY(0, 2, KEY_ENTER),
+ KEY(0, 3, KEY_M),
+
+ KEY(1, 0, KEY_RIGHT),
+ KEY(1, 1, KEY_UP),
+ KEY(1, 2, KEY_I),
+ KEY(1, 3, KEY_N),
+
+ KEY(2, 0, KEY_A),
+ KEY(2, 1, KEY_E),
+ KEY(2, 2, KEY_J),
+ KEY(2, 3, KEY_O),
+
+ KEY(3, 0, KEY_B),
+ KEY(3, 1, KEY_F),
+ KEY(3, 2, KEY_K),
+ KEY(3, 3, KEY_P)
+};
+
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data omap3stalker_kp_data = {
+ .keymap_data = &board_map_data,
+ .rows = 4,
+ .cols = 4,
+ .rep = 1,
+};
+
+static struct twl4030_madc_platform_data omap3stalker_madc_data = {
+ .irq_line = 1,
+};
+
+static struct twl4030_codec_audio_data omap3stalker_audio_data = {
+ .audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data omap3stalker_codec_data = {
+ .audio_mclk = 26000000,
+ .audio = &omap3stalker_audio_data,
+};
+
+static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = {
+ .supply = "vdda_dac",
+ .dev = &omap3_stalker_dss_device.dev,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data omap3_stalker_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3_stalker_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply omap3_stalker_vpll2_supply = {
+ .supply = "vdds_dsi",
+ .dev = &omap3_stalker_lcd_device.dev,
+};
+
+static struct regulator_init_data omap3_stalker_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3_stalker_vpll2_supply,
+};
+
+static struct twl4030_platform_data omap3stalker_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .keypad = &omap3stalker_kp_data,
+ .madc = &omap3stalker_madc_data,
+ .usb = &omap3stalker_usb_data,
+ .gpio = &omap3stalker_gpio_data,
+ .codec = &omap3stalker_codec_data,
+ .vdac = &omap3_stalker_vdac,
+ .vpll2 = &omap3_stalker_vpll2,
+};
+
+static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &omap3stalker_twldata,
+ },
+};
+
+static struct at24_platform_data fram_info = {
+ .byte_len = (64 * 1024) / 8,
+ .page_size = 8192,
+ .flags = AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO,
+};
+
+static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
+ {
+ I2C_BOARD_INFO("24c64", 0x50),
+ .flags = I2C_CLIENT_WAKE,
+ .platform_data = &fram_info,
+ },
+};
+
+static int __init omap3_stalker_i2c_init(void)
+{
+ /*
+ * REVISIT: These entries can be set in omap3evm_twl_data
+ * after a merge with MFD tree
+ */
+ omap3stalker_twldata.vmmc1 = &omap3stalker_vmmc1;
+ omap3stalker_twldata.vsim = &omap3stalker_vsim;
+
+ omap_register_i2c_bus(1, 2600, omap3stalker_i2c_boardinfo,
+ ARRAY_SIZE(omap3stalker_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
+ ARRAY_SIZE(omap3stalker_i2c_boardinfo3));
+ return 0;
+}
+
+#define OMAP3_STALKER_TS_GPIO 175
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(OMAP3_STALKER_TS_GPIO, "ADS7846 pendown") < 0)
+ printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+ gpio_direction_input(OMAP3_STALKER_TS_GPIO);
+
+ omap_set_gpio_debounce(OMAP3_STALKER_TS_GPIO, 1);
+ omap_set_gpio_debounce_time(OMAP3_STALKER_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(OMAP3_STALKER_TS_GPIO);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+ .settle_delay_usecs = 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3stalker_spi_board_info[] = {
+ [0] = {
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_STALKER_TS_GPIO),
+ .platform_data = &ads7846_config,
+ },
+};
+
+static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
+};
+
+static void __init omap3_stalker_init_irq(void)
+{
+ omap_board_config = omap3_stalker_config;
+ omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
+ omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
+ omap_gpio_init();
+}
+
+static struct platform_device *omap3_stalker_devices[] __initdata = {
+ &omap3_stalker_dss_device,
+ &keys_gpio,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+ .phy_reset = true,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = 21,
+ .reset_gpio_port[2] = -EINVAL,
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
+ OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+ OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+ OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+ {.reg_offset = OMAP_MUX_TERMINATOR},
+};
+#else
+#define board_mux NULL
+#endif
+
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
+static void __init omap3_stalker_init(void)
+{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
+
+ omap3_stalker_i2c_init();
+
+ platform_add_devices(omap3_stalker_devices,
+ ARRAY_SIZE(omap3_stalker_devices));
+
+ spi_register_board_info(omap3stalker_spi_board_info,
+ ARRAY_SIZE(omap3stalker_spi_board_info));
+
+ omap_serial_init();
+ usb_musb_init(&musb_board_data);
+ usb_ehci_init(&ehci_pdata);
+ ads7846_dev_init();
+
+ omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP);
+
+ omap3stalker_init_eth();
+ omap3_stalker_display_init();
+/* Ensure SDRC pins are mux'd for self-refresh */
+ omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init omap3_stalker_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap34xx_map_common_io();
+}
+
+MACHINE_START(SBC3530, "OMAP3 STALKER")
+ /* Maintainer: Jason Lam -lzg@ema-tech.com */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_stalker_map_io,
+ .init_irq = omap3_stalker_init_irq,
+ .init_machine = omap3_stalker_init,
+ .timer = &omap_timer,
+MACHINE_END
#define OVERO_SMSC911X_CS 5
#define OVERO_SMSC911X_GPIO 176
+#define OVERO_SMSC911X2_CS 4
+#define OVERO_SMSC911X2_GPIO 65
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
},
};
+static struct resource overo_smsc911x2_resources[] = {
+ {
+ .name = "smsc911x2-memory",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
static struct smsc911x_platform_config overo_smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
static struct platform_device overo_smsc911x_device = {
.name = "smsc911x",
- .id = -1,
+ .id = 0,
.num_resources = ARRAY_SIZE(overo_smsc911x_resources),
.resource = overo_smsc911x_resources,
.dev = {
.dev_name = "mmci-omap-hs.0",
};
-static struct regulator_consumer_supply rx51_vmmc2_supply = {
+static struct regulator_consumer_supply rx51_vaux3_supply = {
.supply = "vmmc",
.dev_name = "mmci-omap-hs.1",
};
.dev_name = "mmci-omap-hs.1",
};
+static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
+ /* tlv320aic3x analog supplies */
+ {
+ .supply = "AVDD",
+ .dev_name = "2-0018",
+ },
+ {
+ .supply = "DRVDD",
+ .dev_name = "2-0018",
+ },
+ /* Keep vmmc as last item. It is not iterated for newer boards */
+ {
+ .supply = "vmmc",
+ .dev_name = "mmci-omap-hs.1",
+ },
+};
+
+static struct regulator_consumer_supply rx51_vio_supplies[] = {
+ /* tlv320aic3x digital supplies */
+ {
+ .supply = "IOVDD",
+ .dev_name = "2-0018"
+ },
+ {
+ .supply = "DVDD",
+ .dev_name = "2-0018"
+ },
+};
+
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+extern struct platform_device rx51_display_device;
+#endif
+
+static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+ {
+ .supply = "vdds_sdi",
+ .dev = &rx51_display_device.dev,
+ },
+#endif
+};
+
static struct regulator_init_data rx51_vaux1 = {
.constraints = {
.name = "V28",
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers),
+ .consumer_supplies = rx51_vaux1_consumers,
};
static struct regulator_init_data rx51_vaux2 = {
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
- .consumer_supplies = &rx51_vmmc2_supply,
+ .consumer_supplies = &rx51_vaux3_supply,
};
static struct regulator_init_data rx51_vaux4 = {
static struct regulator_init_data rx51_vmmc2 = {
.constraints = {
- .name = "VMMC2_30",
- .min_uV = 1850000,
- .max_uV = 3150000,
+ .name = "V28_A",
+ .min_uV = 2800000,
+ .max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &rx51_vmmc2_supply,
+ .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies),
+ .consumer_supplies = rx51_vmmc2_supplies,
};
static struct regulator_init_data rx51_vsim = {
},
};
+static struct regulator_init_data rx51_vio = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies),
+ .consumer_supplies = rx51_vio_supplies,
+};
+
static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
{
/* FIXME this gpio setup is just a placeholder for now */
.vmmc1 = &rx51_vmmc1,
.vsim = &rx51_vsim,
.vdac = &rx51_vdac,
+ .vio = &rx51_vio,
};
static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
},
};
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
+ {
+ I2C_BOARD_INFO("tlv320aic3x", 0x18),
+ },
+};
+
static int __init rx51_i2c_init(void)
{
if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
- system_rev >= SYSTEM_REV_B_USES_VAUX3)
+ system_rev >= SYSTEM_REV_B_USES_VAUX3) {
rx51_twldata.vaux3 = &rx51_vaux3_mmc;
- else {
+ /* Only older boards use VMMC2 for internal MMC */
+ rx51_vmmc2.num_consumer_supplies--;
+ } else {
rx51_twldata.vaux3 = &rx51_vaux3_cam;
- rx51_twldata.vmmc2 = &rx51_vmmc2;
}
+ rx51_twldata.vmmc2 = &rx51_vmmc2;
omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
- ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
- omap_register_i2c_bus(2, 100, NULL, 0);
+ ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
+ omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
+ ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
}
static struct plat_serial8250_port serial_platform_data[] = {
{
- .mapbase = 0x10000000,
+ .mapbase = ZOOM_UART_BASE,
.irq = OMAP_GPIO_IRQ(102),
.flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
.irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING,
}
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
- .phys_io = 0x48000000,
- .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .phys_io = ZOOM_UART_BASE,
+ .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_zoom2_map_io,
.init_irq = omap_zoom2_init_irq,
}
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
- .phys_io = 0x48000000,
- .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
+ .phys_io = ZOOM_UART_BASE,
+ .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_zoom_map_io,
.init_irq = omap_zoom_init_irq,
static int omap2_clk_apll96_enable(struct clk *clk)
{
- return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
+ return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK);
}
static int omap2_clk_apll54_enable(struct clk *clk)
{
- return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
+ return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK);
}
/* Stop APLL */
{
const struct prcm_config *ptr;
long highest_rate;
- long sys_ck_rate;
-
- sys_ck_rate = clk_get_rate(sclk);
highest_rate = -EINVAL;
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
if (!(ptr->flags & cpu_mask))
continue;
- if (ptr->xtal_speed != sys_ck_rate)
+ if (ptr->xtal_speed != sclk->rate)
continue;
highest_rate = ptr->mpu_speed;
const struct prcm_config *prcm;
unsigned long found_speed = 0;
unsigned long flags;
- long sys_ck_rate;
-
- sys_ck_rate = clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sys_ck_rate)
+ if (prcm->xtal_speed != sclk->rate)
continue;
if (prcm->mpu_speed <= rate) {
void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
const struct prcm_config *prcm;
- long sys_ck_rate;
int i = 0;
int tbl_sz = 0;
if (!cpu_is_omap24xx())
return;
- sys_ck_rate = clk_get_rate(sclk);
-
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sys_ck_rate)
+ if (prcm->xtal_speed != sclk->rate)
continue;
/* don't put bypass rates in table */
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sys_ck_rate)
+ if (prcm->xtal_speed != sclk->rate)
continue;
/* don't put bypass rates in table */
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * XXX At some point these clksel clocks should be split into
- * "divider" clocks and "mux" clocks to better match the hardware.
+ *
+ * clksel clocks are clocks that do not have a fixed parent, or that
+ * can divide their parent's rate, or possibly both at the same time, based
+ * on the contents of a hardware register bitfield.
+ *
+ * All of the various mux and divider settings can be encoded into
+ * struct clksel* data structures, and then these can be autogenerated
+ * from some hardware database for each new chip generation. This
+ * should avoid the need to write, review, and validate a lot of new
+ * clock code for each new chip, since it can be exported from the SoC
+ * design flow. This is now done on OMAP4.
+ *
+ * The fusion of mux and divider clocks is a software creation. In
+ * hardware reality, the multiplexer (parent selection) and the
+ * divider exist separately. XXX At some point these clksel clocks
+ * should be split into "divider" clocks and "mux" clocks to better
+ * match the hardware.
+ *
+ * (The name "clksel" comes from the name of the corresponding
+ * register field in the OMAP2/3 family of SoCs.)
*
* XXX Currently these clocks are only used in the OMAP2/3/4 code, but
* many of the OMAP1 clocks should be convertible to use this
#include <plat/clock.h>
#include "clock.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
/* Private functions */
/**
- * _omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
+ * _get_clksel_by_parent() - return clksel struct for a given clk & parent
* @clk: OMAP struct clk ptr to inspect
* @src_clk: OMAP struct clk ptr of the parent clk to search for
*
* the element associated with the supplied parent clock address.
* Returns a pointer to the struct clksel on success or NULL on error.
*/
-static const struct clksel *_omap2_get_clksel_by_parent(struct clk *clk,
- struct clk *src_clk)
+static const struct clksel *_get_clksel_by_parent(struct clk *clk,
+ struct clk *src_clk)
{
const struct clksel *clks;
- if (!clk->clksel)
- return NULL;
-
- for (clks = clk->clksel; clks->parent; clks++) {
+ for (clks = clk->clksel; clks->parent; clks++)
if (clks->parent == src_clk)
break; /* Found the requested parent */
- }
if (!clks->parent) {
- printk(KERN_ERR "clock: Could not find parent clock %s in "
- "clksel array of clock %s\n", src_clk->name,
- clk->name);
+ /* This indicates a data problem */
+ WARN(1, "clock: Could not find parent clock %s in clksel array "
+ "of clock %s\n", src_clk->name, clk->name);
return NULL;
}
return clks;
}
-/*
- * Converts encoded control register address into a full address
- * On error, the return value (parent_div) will be 0.
+/**
+ * _get_div_and_fieldval() - find the new clksel divisor and field value to use
+ * @src_clk: planned new parent struct clk *
+ * @clk: struct clk * that is being reparented
+ * @field_val: pointer to a u32 to contain the register data for the divisor
+ *
+ * Given an intended new parent struct clk * @src_clk, and the struct
+ * clk * @clk to the clock that is being reparented, find the
+ * appropriate rate divisor for the new clock (returned as the return
+ * value), and the corresponding register bitfield data to program to
+ * reach that divisor (returned in the u32 pointed to by @field_val).
+ * Returns 0 on error, or returns the newly-selected divisor upon
+ * success (in this latter case, the corresponding register bitfield
+ * value is passed back in the variable pointed to by @field_val)
*/
-static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
- u32 *field_val)
+static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
+ u32 *field_val)
{
const struct clksel *clks;
- const struct clksel_rate *clkr;
+ const struct clksel_rate *clkr, *max_clkr;
+ u8 max_div = 0;
- clks = _omap2_get_clksel_by_parent(clk, src_clk);
+ clks = _get_clksel_by_parent(clk, src_clk);
if (!clks)
return 0;
+ /*
+ * Find the highest divisor (e.g., the one resulting in the
+ * lowest rate) to use as the default. This should avoid
+ * clock rates that are too high for the device. XXX A better
+ * solution here would be to try to determine if there is a
+ * divisor matching the original clock rate before the parent
+ * switch, and if it cannot be found, to fall back to the
+ * highest divisor.
+ */
for (clkr = clks->rates; clkr->div; clkr++) {
- if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
- break; /* Found the default rate for this platform */
+ if (!(clkr->flags & cpu_mask))
+ continue;
+
+ if (clkr->div > max_div) {
+ max_div = clkr->div;
+ max_clkr = clkr;
+ }
}
- if (!clkr->div) {
- printk(KERN_ERR "clock: Could not find default rate for "
- "clock %s parent %s\n", clk->name,
- src_clk->parent->name);
+ if (max_div == 0) {
+ /* This indicates an error in the clksel data */
+ WARN(1, "clock: Could not find divisor for clock %s parent %s"
+ "\n", clk->name, src_clk->parent->name);
return 0;
}
- /* Should never happen. Add a clksel mask to the struct clk. */
- WARN_ON(clk->clksel_mask == 0);
+ *field_val = max_clkr->val;
- *field_val = clkr->val;
-
- return clkr->div;
+ return max_div;
}
+/**
+ * _write_clksel_reg() - program a clock's clksel register in hardware
+ * @clk: struct clk * to program
+ * @v: clksel bitfield value to program (with LSB at bit 0)
+ *
+ * Shift the clksel register bitfield value @v to its appropriate
+ * location in the clksel register and write it in. This function
+ * will ensure that the write to the clksel_reg reaches its
+ * destination before returning -- important since PRM and CM register
+ * accesses can be quite slow compared to ARM cycles -- but does not
+ * take into account any time the hardware might take to switch the
+ * clock source.
+ */
+static void _write_clksel_reg(struct clk *clk, u32 field_val)
+{
+ u32 v;
-/* Public functions */
+ v = __raw_readl(clk->clksel_reg);
+ v &= ~clk->clksel_mask;
+ v |= field_val << __ffs(clk->clksel_mask);
+ __raw_writel(v, clk->clksel_reg);
+
+ v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+}
/**
- * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
- * @clk: OMAP clock struct ptr to use
+ * _clksel_to_divisor() - turn clksel field value into integer divider
+ * @clk: OMAP struct clk to use
+ * @field_val: register field value to find
*
- * Given a pointer to a source-selectable struct clk, read the hardware
- * register and determine what its parent is currently set to. Update the
- * clk->parent field with the appropriate clk ptr.
+ * Given a struct clk of a rate-selectable clksel clock, and a register field
+ * value to search for, find the corresponding clock divisor. The register
+ * field value should be pre-masked and shifted down so the LSB is at bit 0
+ * before calling. Returns 0 on error or returns the actual integer divisor
+ * upon success.
*/
-void omap2_init_clksel_parent(struct clk *clk)
+static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
- u32 r, found = 0;
- if (!clk->clksel)
- return;
+ clks = _get_clksel_by_parent(clk, clk->parent);
+ if (!clks)
+ return 0;
- r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
- r >>= __ffs(clk->clksel_mask);
+ for (clkr = clks->rates; clkr->div; clkr++) {
+ if (!(clkr->flags & cpu_mask))
+ continue;
- for (clks = clk->clksel; clks->parent && !found; clks++) {
- for (clkr = clks->rates; clkr->div && !found; clkr++) {
- if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
- if (clk->parent != clks->parent) {
- pr_debug("clock: inited %s parent "
- "to %s (was %s)\n",
- clk->name, clks->parent->name,
- ((clk->parent) ?
- clk->parent->name : "NULL"));
- clk_reparent(clk, clks->parent);
- };
- found = 1;
- }
- }
+ if (clkr->val == field_val)
+ break;
}
- if (!found)
- printk(KERN_ERR "clock: init parent: could not find "
- "regval %0x for clock %s\n", r, clk->name);
+ if (!clkr->div) {
+ /* This indicates a data error */
+ WARN(1, "clock: Could not find fieldval %d for clock %s parent "
+ "%s\n", field_val, clk->name, clk->parent->name);
+ return 0;
+ }
- return;
+ return clkr->div;
}
-/*
- * Used for clocks that are part of CLKSEL_xyz governed clocks.
- * REVISIT: Maybe change to use clk->enable() functions like on omap1?
+/**
+ * _divisor_to_clksel() - turn clksel integer divisor into a field value
+ * @clk: OMAP struct clk to use
+ * @div: integer divisor to search for
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a clock
+ * divisor, find the corresponding register field value. Returns the
+ * register field value _before_ left-shifting (i.e., LSB is at bit
+ * 0); or returns 0xFFFFFFFF (~0) upon error.
*/
-unsigned long omap2_clksel_recalc(struct clk *clk)
+static u32 _divisor_to_clksel(struct clk *clk, u32 div)
{
- unsigned long rate;
- u32 div = 0;
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
- pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
+ /* should never happen */
+ WARN_ON(div == 0);
- div = omap2_clksel_get_divisor(clk);
- if (div == 0)
- return clk->rate;
+ clks = _get_clksel_by_parent(clk, clk->parent);
+ if (!clks)
+ return ~0;
- rate = clk->parent->rate / div;
+ for (clkr = clks->rates; clkr->div; clkr++) {
+ if (!(clkr->flags & cpu_mask))
+ continue;
- pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
+ if (clkr->div == div)
+ break;
+ }
- return rate;
+ if (!clkr->div) {
+ pr_err("clock: Could not find divisor %d for clock %s parent "
+ "%s\n", div, clk->name, clk->parent->name);
+ return ~0;
+ }
+
+ return clkr->val;
+}
+
+/**
+ * _read_divisor() - get current divisor applied to parent clock (from hdwr)
+ * @clk: OMAP struct clk to use.
+ *
+ * Read the current divisor register value for @clk that is programmed
+ * into the hardware, convert it into the actual divisor value, and
+ * return it; or return 0 on error.
+ */
+static u32 _read_divisor(struct clk *clk)
+{
+ u32 v;
+
+ if (!clk->clksel || !clk->clksel_mask)
+ return 0;
+
+ v = __raw_readl(clk->clksel_reg);
+ v &= clk->clksel_mask;
+ v >>= __ffs(clk->clksel_mask);
+
+ return _clksel_to_divisor(clk, v);
}
+/* Public functions */
+
/**
- * omap2_clksel_round_rate_div - find divisor for the given clock and rate
+ * omap2_clksel_round_rate_div() - find divisor for the given clock and rate
* @clk: OMAP struct clk to use
* @target_rate: desired clock rate
* @new_div: ptr to where we should store the divisor
*
* Finds 'best' divider value in an array based on the source and target
* rates. The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
+ * This function is also used by the DPLL3 M2 divider code.
*
* Returns the rounded clock rate or returns 0xffffffff on error.
*/
const struct clksel_rate *clkr;
u32 last_div = 0;
+ if (!clk->clksel || !clk->clksel_mask)
+ return ~0;
+
pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
clk->name, target_rate);
*new_div = 1;
- clks = _omap2_get_clksel_by_parent(clk, clk->parent);
+ clks = _get_clksel_by_parent(clk, clk->parent);
if (!clks)
return ~0;
return clk->parent->rate / clkr->div;
}
-/**
- * omap2_clksel_round_rate - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * Compatibility wrapper for OMAP clock framework
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
+/*
+ * Clocktype interface functions to the OMAP clock code
+ * (i.e., those used in struct clk field function pointers, etc.)
*/
-long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
-{
- u32 new_div;
-
- return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-
-/* Given a clock and a rate apply a clock specific rounding function */
-long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk->round_rate)
- return clk->round_rate(clk, rate);
-
- return clk->rate;
-}
/**
- * omap2_clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
+ * omap2_init_clksel_parent() - set a clksel clk's parent field from the hdwr
+ * @clk: OMAP clock struct ptr to use
*
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor. The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling. Returns 0 on error
+ * Given a pointer @clk to a source-selectable struct clk, read the
+ * hardware register and determine what its parent is currently set
+ * to. Update @clk's .parent field with the appropriate clk ptr. No
+ * return value.
*/
-u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
+void omap2_init_clksel_parent(struct clk *clk)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
+ u32 r, found = 0;
- clks = _omap2_get_clksel_by_parent(clk, clk->parent);
- if (!clks)
- return 0;
+ if (!clk->clksel || !clk->clksel_mask)
+ return;
- for (clkr = clks->rates; clkr->div; clkr++) {
- if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
- break;
- }
+ r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+ r >>= __ffs(clk->clksel_mask);
- if (!clkr->div) {
- printk(KERN_ERR "clock: Could not find fieldval %d for "
- "clock %s parent %s\n", field_val, clk->name,
- clk->parent->name);
- return 0;
+ for (clks = clk->clksel; clks->parent && !found; clks++) {
+ for (clkr = clks->rates; clkr->div && !found; clkr++) {
+ if (!(clkr->flags & cpu_mask))
+ continue;
+
+ if (clkr->val == r) {
+ if (clk->parent != clks->parent) {
+ pr_debug("clock: inited %s parent "
+ "to %s (was %s)\n",
+ clk->name, clks->parent->name,
+ ((clk->parent) ?
+ clk->parent->name : "NULL"));
+ clk_reparent(clk, clks->parent);
+ };
+ found = 1;
+ }
+ }
}
- return clkr->div;
+ /* This indicates a data error */
+ WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
+ clk->name, r);
+
+ return;
}
/**
- * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
+ * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
+ * @clk: struct clk *
*
- * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
- * find the corresponding register field value. The return register value is
- * the value before left-shifting. Returns ~0 on error
+ * This function is intended to be called only by the clock framework.
+ * Each clksel clock should have its struct clk .recalc field set to this
+ * function. Returns the clock's current rate, based on its parent's rate
+ * and its current divisor setting in the hardware.
*/
-u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
+unsigned long omap2_clksel_recalc(struct clk *clk)
{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
-
- /* should never happen */
- WARN_ON(div == 0);
+ unsigned long rate;
+ u32 div = 0;
- clks = _omap2_get_clksel_by_parent(clk, clk->parent);
- if (!clks)
- return ~0;
+ div = _read_divisor(clk);
+ if (div == 0)
+ return clk->rate;
- for (clkr = clks->rates; clkr->div; clkr++) {
- if ((clkr->flags & cpu_mask) && (clkr->div == div))
- break;
- }
+ rate = clk->parent->rate / div;
- if (!clkr->div) {
- printk(KERN_ERR "clock: Could not find divisor %d for "
- "clock %s parent %s\n", div, clk->name,
- clk->parent->name);
- return ~0;
- }
+ pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name,
+ rate, div);
- return clkr->val;
+ return rate;
}
/**
- * omap2_clksel_get_divisor - get current divider applied to parent clock.
- * @clk: OMAP struct clk to use.
+ * omap2_clksel_round_rate() - find rounded rate for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ *
+ * This function is intended to be called only by the clock framework.
+ * Finds best target rate based on the source clock and possible dividers.
+ * rates. The divider array must be sorted with smallest divider first.
*
- * Returns the integer divisor upon success or 0 on error.
+ * Returns the rounded clock rate or returns 0xffffffff on error.
*/
-u32 omap2_clksel_get_divisor(struct clk *clk)
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
{
- u32 v;
-
- if (!clk->clksel_mask)
- return 0;
-
- v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
- v >>= __ffs(clk->clksel_mask);
+ u32 new_div;
- return omap2_clksel_to_divisor(clk, v);
+ return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
}
+/**
+ * omap2_clksel_set_rate() - program clock rate in hardware
+ * @clk: struct clk * to program rate
+ * @rate: target rate to program
+ *
+ * This function is intended to be called only by the clock framework.
+ * Program @clk's rate to @rate in the hardware. The clock can be
+ * either enabled or disabled when this happens, although if the clock
+ * is enabled, some downstream devices may glitch or behave
+ * unpredictably when the clock rate is changed - this depends on the
+ * hardware. This function does not currently check the usecount of
+ * the clock, so if multiple drivers are using the clock, and the rate
+ * is changed, they will all be affected without any notification.
+ * Returns -EINVAL upon error, or 0 upon success.
+ */
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
{
- u32 v, field_val, validrate, new_div = 0;
+ u32 field_val, validrate, new_div = 0;
- if (!clk->clksel_mask)
+ if (!clk->clksel || !clk->clksel_mask)
return -EINVAL;
validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
if (validrate != rate)
return -EINVAL;
- field_val = omap2_divisor_to_clksel(clk, new_div);
+ field_val = _divisor_to_clksel(clk, new_div);
if (field_val == ~0)
return -EINVAL;
- v = __raw_readl(clk->clksel_reg);
- v &= ~clk->clksel_mask;
- v |= field_val << __ffs(clk->clksel_mask);
- __raw_writel(v, clk->clksel_reg);
- v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+ _write_clksel_reg(clk, field_val);
clk->rate = clk->parent->rate / new_div;
+ pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate);
+
return 0;
}
+/*
+ * Clksel parent setting function - not passed in struct clk function
+ * pointer - instead, the OMAP clock code currently assumes that any
+ * parent-setting clock is a clksel clock, and calls
+ * omap2_clksel_set_parent() by default
+ */
+
+/**
+ * omap2_clksel_set_parent() - change a clock's parent clock
+ * @clk: struct clk * of the child clock
+ * @new_parent: struct clk * of the new parent clock
+ *
+ * This function is intended to be called only by the clock framework.
+ * Change the parent clock of clock @clk to @new_parent. This is
+ * intended to be used while @clk is disabled. This function does not
+ * currently check the usecount of the clock, so if multiple drivers
+ * are using the clock, and the parent is changed, they will all be
+ * affected without any notification. Returns -EINVAL upon error, or
+ * 0 upon success.
+ */
int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
{
- u32 field_val, v, parent_div;
+ u32 field_val = 0;
+ u32 parent_div;
- if (!clk->clksel)
+ if (!clk->clksel || !clk->clksel_mask)
return -EINVAL;
- parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
+ parent_div = _get_div_and_fieldval(new_parent, clk, &field_val);
if (!parent_div)
return -EINVAL;
- /* Set new source value (previous dividers if any in effect) */
- v = __raw_readl(clk->clksel_reg);
- v &= ~clk->clksel_mask;
- v |= field_val << __ffs(clk->clksel_mask);
- __raw_writel(v, clk->clksel_reg);
- v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+ _write_clksel_reg(clk, field_val);
clk_reparent(clk, new_parent);
if (parent_div > 0)
clk->rate /= parent_div;
- pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
+ pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
clk->name, clk->parent->name, clk->rate);
return 0;
return ret;
}
+/* Given a clock and a rate apply a clock specific rounding function */
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk->round_rate)
+ return clk->round_rate(clk, rate);
+
+ return clk->rate;
+}
+
/* Set the clock rate for a clock source */
int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
{
#define omap2_clk_disable_unused NULL
#endif
-unsigned long omap2_clksel_recalc(struct clk *clk);
void omap2_init_clk_clkdm(struct clk *clk);
-void omap2_init_clksel_parent(struct clk *clk);
-u32 omap2_clksel_get_divisor(struct clk *clk);
+
+/* clkt_clksel.c public functions */
u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
u32 *new_div);
-u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
-u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
+void omap2_init_clksel_parent(struct clk *clk);
+unsigned long omap2_clksel_recalc(struct clk *clk);
long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
+
u32 omap2_get_dpll_rate(struct clk *clk);
void omap2_init_dpll_parent(struct clk *clk);
+
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
/* func_54m_ck */
static const struct clksel_rate func_54m_apll54_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 },
};
static const struct clksel_rate func_54m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 0 },
};
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_54M_SOURCE,
+ .clksel_mask = OMAP24XX_54M_SOURCE_MASK,
.clksel = func_54m_clksel,
.recalc = &omap2_clksel_recalc,
};
/* func_48m_ck */
static const struct clksel_rate func_48m_apll96_rates[] = {
- { .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 2, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 },
};
static const struct clksel_rate func_48m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 0 },
};
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_48M_SOURCE,
+ .clksel_mask = OMAP24XX_48M_SOURCE_MASK,
.clksel = func_48m_clksel,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
* flags fields, which mark them as 2420-only.
*/
static const struct clksel_rate common_clkout_src_core_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 }
};
static const struct clksel_rate common_clkout_src_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 0 }
};
static const struct clksel_rate common_clkout_src_96m_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 2, .flags = RATE_IN_24XX },
{ .div = 0 }
};
static const struct clksel_rate common_clkout_src_54m_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 3, .flags = RATE_IN_24XX },
{ .div = 0 }
};
};
static const struct clksel_rate common_clkout_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
*
*/
static const struct clksel_rate mpu_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 4, .val = 4, .flags = RATE_IN_242X },
{ .div = 6, .val = 6, .flags = RATE_IN_242X },
* routed into a synchronizer and out of clocks abc.
*/
static const struct clksel_rate dsp_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
/* DSP interface clock */
static const struct clksel_rate dsp_irate_ick_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 0 },
};
static const struct clksel_rate core_l3_core_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 2, .val = 2, .flags = RATE_IN_242X },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 4, .val = 4, .flags = RATE_IN_24XX },
{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
{ .div = 8, .val = 8, .flags = RATE_IN_242X },
{ .div = 12, .val = 12, .flags = RATE_IN_242X },
/* usb_l4_ick */
static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
{ .div = 0 }
};
* this domain.
*/
static const struct clksel_rate l4_core_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 0 }
};
*/
static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
{ .div = 6, .val = 6, .flags = RATE_IN_242X },
/* XXX Add RATE_NOT_VALIDATED */
static const struct clksel_rate dss1_fck_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 }
};
{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
- { .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 16, .val = 16, .flags = RATE_IN_24XX },
{ .div = 0 }
};
};
static const struct clksel_rate dss2_fck_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 }
};
static const struct clksel_rate dss2_fck_48m_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 0 }
};
* functional clock parents.
*/
static const struct clksel_rate gpt_alt_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 2, .flags = RATE_IN_24XX },
{ .div = 0 }
};
};
static const struct clksel_rate vlynq_fck_96m_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_242X },
{ .div = 0 }
};
{ .div = 8, .val = 8, .flags = RATE_IN_242X },
{ .div = 9, .val = 9, .flags = RATE_IN_242X },
{ .div = 12, .val = 12, .flags = RATE_IN_242X },
- { .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE },
+ { .div = 16, .val = 16, .flags = RATE_IN_242X },
{ .div = 18, .val = 18, .flags = RATE_IN_242X },
{ .div = 0 }
};
/* func_54m_ck */
static const struct clksel_rate func_54m_apll54_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 },
};
static const struct clksel_rate func_54m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 0 },
};
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_54M_SOURCE,
+ .clksel_mask = OMAP24XX_54M_SOURCE_MASK,
.clksel = func_54m_clksel,
.recalc = &omap2_clksel_recalc,
};
/* func_96m_ck */
static const struct clksel_rate func_96m_apll96_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 },
};
static const struct clksel_rate func_96m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_243X },
{ .div = 0 },
};
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP2430_96M_SOURCE,
+ .clksel_mask = OMAP2430_96M_SOURCE_MASK,
.clksel = func_96m_clksel,
.recalc = &omap2_clksel_recalc,
};
/* func_48m_ck */
static const struct clksel_rate func_48m_apll96_rates[] = {
- { .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 2, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 },
};
static const struct clksel_rate func_48m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 0 },
};
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_48M_SOURCE,
+ .clksel_mask = OMAP24XX_48M_SOURCE_MASK,
.clksel = func_48m_clksel,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
* flags fields, which mark them as 2420-only.
*/
static const struct clksel_rate common_clkout_src_core_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 }
};
static const struct clksel_rate common_clkout_src_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 0 }
};
static const struct clksel_rate common_clkout_src_96m_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 2, .flags = RATE_IN_24XX },
{ .div = 0 }
};
static const struct clksel_rate common_clkout_src_54m_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 3, .flags = RATE_IN_24XX },
{ .div = 0 }
};
};
static const struct clksel_rate common_clkout_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
*
*/
static const struct clksel_rate mpu_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 0 },
};
* routed into a synchronizer and out of clocks abc.
*/
static const struct clksel_rate dsp_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
/* DSP interface clock */
static const struct clksel_rate dsp_irate_ick_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 3, .val = 3, .flags = RATE_IN_243X },
{ .div = 0 },
*/
static const struct clksel_rate core_l3_core_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 4, .val = 4, .flags = RATE_IN_24XX },
{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
{ .div = 0 }
};
/* usb_l4_ick */
static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
{ .div = 0 }
};
* this domain.
*/
static const struct clksel_rate l4_core_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 0 }
};
*/
static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 2, .val = 2, .flags = RATE_IN_24XX },
{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
{ .div = 5, .val = 5, .flags = RATE_IN_243X },
*/
static const struct clksel_rate mdm_ick_core_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_243X },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE },
+ { .div = 4, .val = 4, .flags = RATE_IN_243X },
{ .div = 6, .val = 6, .flags = RATE_IN_243X },
{ .div = 9, .val = 9, .flags = RATE_IN_243X },
{ .div = 0 }
/* XXX Add RATE_NOT_VALIDATED */
static const struct clksel_rate dss1_fck_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 }
};
{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
- { .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 16, .val = 16, .flags = RATE_IN_24XX },
{ .div = 0 }
};
};
static const struct clksel_rate dss2_fck_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX },
{ .div = 0 }
};
static const struct clksel_rate dss2_fck_48m_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX },
{ .div = 0 }
};
* functional clock parents.
*/
static const struct clksel_rate gpt_alt_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+ { .div = 1, .val = 2, .flags = RATE_IN_24XX },
{ .div = 0 }
};
};
static const struct clksel_rate osc_sys_12m_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate osc_sys_13m_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate osc_sys_16_8m_rates[] = {
- { .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE },
+ { .div = 1, .val = 5, .flags = RATE_IN_3430ES2PLUS },
{ .div = 0 }
};
static const struct clksel_rate osc_sys_19_2m_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 2, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate osc_sys_26m_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 3, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate osc_sys_38_4m_rates[] = {
- { .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 4, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
};
static const struct clksel_rate div2_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_343X },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+ { .div = 2, .val = 2, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
/* CM CLOCKS */
static const struct clksel_rate div16_dpll_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_343X },
- { .div = 3, .val = 3, .flags = RATE_IN_343X },
- { .div = 4, .val = 4, .flags = RATE_IN_343X },
- { .div = 5, .val = 5, .flags = RATE_IN_343X },
- { .div = 6, .val = 6, .flags = RATE_IN_343X },
- { .div = 7, .val = 7, .flags = RATE_IN_343X },
- { .div = 8, .val = 8, .flags = RATE_IN_343X },
- { .div = 9, .val = 9, .flags = RATE_IN_343X },
- { .div = 10, .val = 10, .flags = RATE_IN_343X },
- { .div = 11, .val = 11, .flags = RATE_IN_343X },
- { .div = 12, .val = 12, .flags = RATE_IN_343X },
- { .div = 13, .val = 13, .flags = RATE_IN_343X },
- { .div = 14, .val = 14, .flags = RATE_IN_343X },
- { .div = 15, .val = 15, .flags = RATE_IN_343X },
- { .div = 16, .val = 16, .flags = RATE_IN_343X },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+ { .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+ { .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+ { .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+ { .div = 5, .val = 5, .flags = RATE_IN_3XXX },
+ { .div = 6, .val = 6, .flags = RATE_IN_3XXX },
+ { .div = 7, .val = 7, .flags = RATE_IN_3XXX },
+ { .div = 8, .val = 8, .flags = RATE_IN_3XXX },
+ { .div = 9, .val = 9, .flags = RATE_IN_3XXX },
+ { .div = 10, .val = 10, .flags = RATE_IN_3XXX },
+ { .div = 11, .val = 11, .flags = RATE_IN_3XXX },
+ { .div = 12, .val = 12, .flags = RATE_IN_3XXX },
+ { .div = 13, .val = 13, .flags = RATE_IN_3XXX },
+ { .div = 14, .val = 14, .flags = RATE_IN_3XXX },
+ { .div = 15, .val = 15, .flags = RATE_IN_3XXX },
+ { .div = 16, .val = 16, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
-static const struct clksel_rate div32_dpll4_rates_3630[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_36XX | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_36XX },
- { .div = 3, .val = 3, .flags = RATE_IN_36XX },
- { .div = 4, .val = 4, .flags = RATE_IN_36XX },
- { .div = 5, .val = 5, .flags = RATE_IN_36XX },
- { .div = 6, .val = 6, .flags = RATE_IN_36XX },
- { .div = 7, .val = 7, .flags = RATE_IN_36XX },
- { .div = 8, .val = 8, .flags = RATE_IN_36XX },
- { .div = 9, .val = 9, .flags = RATE_IN_36XX },
- { .div = 10, .val = 10, .flags = RATE_IN_36XX },
- { .div = 11, .val = 11, .flags = RATE_IN_36XX },
- { .div = 12, .val = 12, .flags = RATE_IN_36XX },
- { .div = 13, .val = 13, .flags = RATE_IN_36XX },
- { .div = 14, .val = 14, .flags = RATE_IN_36XX },
- { .div = 15, .val = 15, .flags = RATE_IN_36XX },
- { .div = 16, .val = 16, .flags = RATE_IN_36XX },
+static const struct clksel_rate dpll4_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+ { .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+ { .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+ { .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+ { .div = 5, .val = 5, .flags = RATE_IN_3XXX },
+ { .div = 6, .val = 6, .flags = RATE_IN_3XXX },
+ { .div = 7, .val = 7, .flags = RATE_IN_3XXX },
+ { .div = 8, .val = 8, .flags = RATE_IN_3XXX },
+ { .div = 9, .val = 9, .flags = RATE_IN_3XXX },
+ { .div = 10, .val = 10, .flags = RATE_IN_3XXX },
+ { .div = 11, .val = 11, .flags = RATE_IN_3XXX },
+ { .div = 12, .val = 12, .flags = RATE_IN_3XXX },
+ { .div = 13, .val = 13, .flags = RATE_IN_3XXX },
+ { .div = 14, .val = 14, .flags = RATE_IN_3XXX },
+ { .div = 15, .val = 15, .flags = RATE_IN_3XXX },
+ { .div = 16, .val = 16, .flags = RATE_IN_3XXX },
{ .div = 17, .val = 17, .flags = RATE_IN_36XX },
{ .div = 18, .val = 18, .flags = RATE_IN_36XX },
{ .div = 19, .val = 19, .flags = RATE_IN_36XX },
};
static const struct clksel_rate div31_dpll3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_343X },
- { .div = 3, .val = 3, .flags = RATE_IN_3430ES2 },
- { .div = 4, .val = 4, .flags = RATE_IN_3430ES2 },
- { .div = 5, .val = 5, .flags = RATE_IN_3430ES2 },
- { .div = 6, .val = 6, .flags = RATE_IN_3430ES2 },
- { .div = 7, .val = 7, .flags = RATE_IN_3430ES2 },
- { .div = 8, .val = 8, .flags = RATE_IN_3430ES2 },
- { .div = 9, .val = 9, .flags = RATE_IN_3430ES2 },
- { .div = 10, .val = 10, .flags = RATE_IN_3430ES2 },
- { .div = 11, .val = 11, .flags = RATE_IN_3430ES2 },
- { .div = 12, .val = 12, .flags = RATE_IN_3430ES2 },
- { .div = 13, .val = 13, .flags = RATE_IN_3430ES2 },
- { .div = 14, .val = 14, .flags = RATE_IN_3430ES2 },
- { .div = 15, .val = 15, .flags = RATE_IN_3430ES2 },
- { .div = 16, .val = 16, .flags = RATE_IN_3430ES2 },
- { .div = 17, .val = 17, .flags = RATE_IN_3430ES2 },
- { .div = 18, .val = 18, .flags = RATE_IN_3430ES2 },
- { .div = 19, .val = 19, .flags = RATE_IN_3430ES2 },
- { .div = 20, .val = 20, .flags = RATE_IN_3430ES2 },
- { .div = 21, .val = 21, .flags = RATE_IN_3430ES2 },
- { .div = 22, .val = 22, .flags = RATE_IN_3430ES2 },
- { .div = 23, .val = 23, .flags = RATE_IN_3430ES2 },
- { .div = 24, .val = 24, .flags = RATE_IN_3430ES2 },
- { .div = 25, .val = 25, .flags = RATE_IN_3430ES2 },
- { .div = 26, .val = 26, .flags = RATE_IN_3430ES2 },
- { .div = 27, .val = 27, .flags = RATE_IN_3430ES2 },
- { .div = 28, .val = 28, .flags = RATE_IN_3430ES2 },
- { .div = 29, .val = 29, .flags = RATE_IN_3430ES2 },
- { .div = 30, .val = 30, .flags = RATE_IN_3430ES2 },
- { .div = 31, .val = 31, .flags = RATE_IN_3430ES2 },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+ { .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+ { .div = 3, .val = 3, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 4, .val = 4, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 5, .val = 5, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 6, .val = 6, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 7, .val = 7, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 8, .val = 8, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 9, .val = 9, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 10, .val = 10, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 11, .val = 11, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 12, .val = 12, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 13, .val = 13, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 14, .val = 14, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 15, .val = 15, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 16, .val = 16, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 17, .val = 17, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 18, .val = 18, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 19, .val = 19, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 20, .val = 20, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 21, .val = 21, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 22, .val = 22, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 23, .val = 23, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 24, .val = 24, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 25, .val = 25, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 26, .val = 26, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 27, .val = 27, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 28, .val = 28, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 29, .val = 29, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 30, .val = 30, .flags = RATE_IN_3430ES2PLUS },
+ { .div = 31, .val = 31, .flags = RATE_IN_3430ES2PLUS },
{ .div = 0 },
};
/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
/* Type: DPLL */
static struct dpll_data dpll4_dd;
+
static struct dpll_data dpll4_dd_34xx __initdata = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
.mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK,
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel div16_dpll4_clksel[] = {
- { .parent = &dpll4_ck, .rates = div16_dpll_rates },
- { .parent = NULL }
-};
-
-static const struct clksel div32_dpll4_clksel[] = {
- { .parent = &dpll4_ck, .rates = div32_dpll4_rates_3630 },
+static const struct clksel dpll4_clksel[] = {
+ { .parent = &dpll4_ck, .rates = dpll4_rates },
{ .parent = NULL }
};
/* This virtual clock is the source for dpll4_m2x2_ck */
-static struct clk dpll4_m2_ck;
-
-static struct clk dpll4_m2_ck_34xx __initdata = {
- .name = "dpll4_m2_ck",
- .ops = &clkops_null,
- .parent = &dpll4_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
- .clksel_mask = OMAP3430_DIV_96M_MASK,
- .clksel = div16_dpll4_clksel,
- .clkdm_name = "dpll4_clkdm",
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk dpll4_m2_ck_3630 __initdata = {
+static struct clk dpll4_m2_ck = {
.name = "dpll4_m2_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
.clksel_mask = OMAP3630_DIV_96M_MASK,
- .clksel = div32_dpll4_clksel,
+ .clksel = dpll4_clksel,
.clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
static const struct clksel_rate omap_96m_alwon_fck_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_36XX },
- { .div = 2, .val = 2, .flags = RATE_IN_36XX | DEFAULT_RATE },
+ { .div = 2, .val = 2, .flags = RATE_IN_36XX },
{ .div = 0 }
};
};
static const struct clksel_rate omap_96m_dpll_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate omap_96m_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
};
/* This virtual clock is the source for dpll4_m3x2_ck */
-static struct clk dpll4_m3_ck;
-
-static struct clk dpll4_m3_ck_34xx __initdata = {
+static struct clk dpll4_m3_ck = {
.name = "dpll4_m3_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_TV_MASK,
- .clksel = div16_dpll4_clksel,
- .clkdm_name = "dpll4_clkdm",
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk dpll4_m3_ck_3630 __initdata = {
- .name = "dpll4_m3_ck",
- .ops = &clkops_null,
- .parent = &dpll4_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
- .clksel_mask = OMAP3630_CLKSEL_TV_MASK,
- .clksel = div32_dpll4_clksel,
+ .clksel = dpll4_clksel,
.clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
};
static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate omap_54m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
};
static const struct clksel_rate omap_48m_cm96m_rates[] = {
- { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 2, .val = 0, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate omap_48m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
.recalc = &omap_fixed_divisor_recalc,
};
-/* This virstual clock is the source for dpll4_m4x2_ck */
-static struct clk dpll4_m4_ck;
-
-static struct clk dpll4_m4_ck_34xx __initdata = {
+/* This virtual clock is the source for dpll4_m4x2_ck */
+static struct clk dpll4_m4_ck = {
.name = "dpll4_m4_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_DSS1_MASK,
- .clksel = div16_dpll4_clksel,
- .clkdm_name = "dpll4_clkdm",
- .recalc = &omap2_clksel_recalc,
- .set_rate = &omap2_clksel_set_rate,
- .round_rate = &omap2_clksel_round_rate,
-};
-
-static struct clk dpll4_m4_ck_3630 __initdata = {
- .name = "dpll4_m4_ck",
- .ops = &clkops_null,
- .parent = &dpll4_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
- .clksel_mask = OMAP3630_CLKSEL_DSS1_MASK,
- .clksel = div32_dpll4_clksel,
+ .clksel = dpll4_clksel,
.clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
.set_rate = &omap2_clksel_set_rate,
};
/* This virtual clock is the source for dpll4_m5x2_ck */
-static struct clk dpll4_m5_ck;
-
-static struct clk dpll4_m5_ck_34xx __initdata = {
+static struct clk dpll4_m5_ck = {
.name = "dpll4_m5_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_CAM_MASK,
- .clksel = div16_dpll4_clksel,
- .clkdm_name = "dpll4_clkdm",
- .set_rate = &omap2_clksel_set_rate,
- .round_rate = &omap2_clksel_round_rate,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk dpll4_m5_ck_3630 __initdata = {
- .name = "dpll4_m5_ck",
- .ops = &clkops_null,
- .parent = &dpll4_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
- .clksel_mask = OMAP3630_CLKSEL_CAM_MASK,
- .clksel = div32_dpll4_clksel,
+ .clksel = dpll4_clksel,
.clkdm_name = "dpll4_clkdm",
.set_rate = &omap2_clksel_set_rate,
.round_rate = &omap2_clksel_round_rate,
};
/* This virtual clock is the source for dpll4_m6x2_ck */
-static struct clk dpll4_m6_ck;
-
-static struct clk dpll4_m6_ck_34xx __initdata = {
+static struct clk dpll4_m6_ck = {
.name = "dpll4_m6_ck",
.ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_DIV_DPLL4_MASK,
- .clksel = div16_dpll4_clksel,
- .clkdm_name = "dpll4_clkdm",
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk dpll4_m6_ck_3630 __initdata = {
- .name = "dpll4_m6_ck",
- .ops = &clkops_null,
- .parent = &dpll4_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP3630_DIV_DPLL4_MASK,
- .clksel = div32_dpll4_clksel,
+ .clksel = dpll4_clksel,
.clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* CM EXTERNAL CLOCK OUTPUTS */
static const struct clksel_rate clkout2_src_core_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate clkout2_src_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate clkout2_src_96m_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 2, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate clkout2_src_54m_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 3, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
};
static const struct clksel_rate sys_clkout2_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 2, .val = 1, .flags = RATE_IN_343X },
- { .div = 4, .val = 2, .flags = RATE_IN_343X },
- { .div = 8, .val = 3, .flags = RATE_IN_343X },
- { .div = 16, .val = 4, .flags = RATE_IN_343X },
+ { .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+ { .div = 2, .val = 1, .flags = RATE_IN_3XXX },
+ { .div = 4, .val = 2, .flags = RATE_IN_3XXX },
+ { .div = 8, .val = 3, .flags = RATE_IN_3XXX },
+ { .div = 16, .val = 4, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
.clksel_mask = OMAP3430_CLKOUT2_DIV_MASK,
.clksel = sys_clkout2_clksel,
.recalc = &omap2_clksel_recalc,
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap2_clksel_set_rate
};
/* CM OUTPUT CLOCKS */
/* DPLL power domain clock controls */
static const struct clksel_rate div4_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_343X },
- { .div = 4, .val = 4, .flags = RATE_IN_343X },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+ { .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+ { .div = 4, .val = 4, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
static const struct clksel_rate arm_fck_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 2, .val = 1, .flags = RATE_IN_343X },
+ { .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+ { .div = 2, .val = 1, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
static const struct clksel_rate sgx_core_rates[] = {
{ .div = 2, .val = 5, .flags = RATE_IN_36XX },
- { .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 4, .val = 1, .flags = RATE_IN_343X },
- { .div = 6, .val = 2, .flags = RATE_IN_343X },
+ { .div = 3, .val = 0, .flags = RATE_IN_3XXX },
+ { .div = 4, .val = 1, .flags = RATE_IN_3XXX },
+ { .div = 6, .val = 2, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
static const struct clksel_rate sgx_192m_rates[] = {
- { .div = 1, .val = 4, .flags = RATE_IN_36XX | DEFAULT_RATE },
+ { .div = 1, .val = 4, .flags = RATE_IN_36XX },
{ .div = 0 },
};
static const struct clksel_rate sgx_corex2_rates[] = {
- { .div = 3, .val = 6, .flags = RATE_IN_36XX | DEFAULT_RATE },
+ { .div = 3, .val = 6, .flags = RATE_IN_36XX },
{ .div = 5, .val = 7, .flags = RATE_IN_36XX },
{ .div = 0 },
};
static const struct clksel_rate sgx_96m_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 3, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
* MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
*/
static const struct clksel_rate common_mcbsp_96m_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
/* DPLL3-derived clock */
static const struct clksel_rate ssi_ssr_corex2_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_343X },
- { .div = 3, .val = 3, .flags = RATE_IN_343X },
- { .div = 4, .val = 4, .flags = RATE_IN_343X },
- { .div = 6, .val = 6, .flags = RATE_IN_343X },
- { .div = 8, .val = 8, .flags = RATE_IN_343X },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+ { .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+ { .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+ { .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+ { .div = 6, .val = 6, .flags = RATE_IN_3XXX },
+ { .div = 8, .val = 8, .flags = RATE_IN_3XXX },
{ .div = 0 }
};
/* WKUP */
static const struct clksel_rate usim_96m_rates[] = {
- { .div = 2, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 4, .val = 4, .flags = RATE_IN_343X },
- { .div = 8, .val = 5, .flags = RATE_IN_343X },
- { .div = 10, .val = 6, .flags = RATE_IN_343X },
+ { .div = 2, .val = 3, .flags = RATE_IN_3XXX },
+ { .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+ { .div = 8, .val = 5, .flags = RATE_IN_3XXX },
+ { .div = 10, .val = 6, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
static const struct clksel_rate usim_120m_rates[] = {
- { .div = 4, .val = 7, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 8, .val = 8, .flags = RATE_IN_343X },
- { .div = 16, .val = 9, .flags = RATE_IN_343X },
- { .div = 20, .val = 10, .flags = RATE_IN_343X },
+ { .div = 4, .val = 7, .flags = RATE_IN_3XXX },
+ { .div = 8, .val = 8, .flags = RATE_IN_3XXX },
+ { .div = 16, .val = 9, .flags = RATE_IN_3XXX },
+ { .div = 20, .val = 10, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
static const struct clksel_rate emu_src_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
static const struct clksel_rate emu_src_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
static const struct clksel_rate emu_src_per_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 2, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
static const struct clksel_rate emu_src_mpu_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 3, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
};
static const struct clksel_rate pclk_emu_rates[] = {
- { .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 3, .val = 3, .flags = RATE_IN_343X },
- { .div = 4, .val = 4, .flags = RATE_IN_343X },
- { .div = 6, .val = 6, .flags = RATE_IN_343X },
+ { .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+ { .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+ { .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+ { .div = 6, .val = 6, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
};
static const struct clksel_rate pclkx2_emu_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_343X },
- { .div = 3, .val = 3, .flags = RATE_IN_343X },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+ { .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+ { .div = 3, .val = 3, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
};
static const struct clksel_rate traceclk_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 2, .val = 2, .flags = RATE_IN_343X },
- { .div = 4, .val = 4, .flags = RATE_IN_343X },
+ { .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+ { .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+ { .div = 4, .val = 4, .flags = RATE_IN_3XXX },
{ .div = 0 },
};
CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX),
CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX),
CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX),
- CLK("davinci_emac", "ick", &emac_ick, CK_AM35XX),
- CLK("davinci_emac", "fck", &emac_fck, CK_AM35XX),
+ CLK("davinci_emac", "emac_clk", &emac_ick, CK_AM35XX),
+ CLK("davinci_emac", "phy_clk", &emac_fck, CK_AM35XX),
CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
CLK("musb_hdrc", "ick", &hsotgusb_ick_am35xx, CK_AM35XX),
struct omap_clk *c;
u32 cpu_clkflg = CK_3XXX;
- if (cpu_is_omap3517()) {
- cpu_mask = RATE_IN_343X | RATE_IN_3430ES2;
- cpu_clkflg |= CK_3517;
- } else if (cpu_is_omap3505()) {
- cpu_mask = RATE_IN_343X | RATE_IN_3430ES2;
- cpu_clkflg |= CK_3505;
- } else if (cpu_is_omap34xx()) {
- cpu_mask = RATE_IN_343X;
+ if (cpu_is_omap34xx()) {
+ cpu_mask = RATE_IN_3XXX;
cpu_clkflg |= CK_343X;
/*
/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
cpu_clkflg |= CK_3430ES1;
} else {
- cpu_mask |= RATE_IN_3430ES2;
+ cpu_mask |= RATE_IN_3430ES2PLUS;
cpu_clkflg |= CK_3430ES2;
}
+ } else if (cpu_is_omap3517()) {
+ cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+ cpu_clkflg |= CK_3517;
+ } else if (cpu_is_omap3505()) {
+ cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+ cpu_clkflg |= CK_3505;
}
+
if (omap3_has_192mhz_clk())
omap_96m_alwon_fck = omap_96m_alwon_fck_3630;
/*
* XXX This type of dynamic rewriting of the clock tree is
* deprecated and should be revised soon.
- */
- dpll4_m2_ck = dpll4_m2_ck_3630;
- dpll4_m3_ck = dpll4_m3_ck_3630;
- dpll4_m4_ck = dpll4_m4_ck_3630;
- dpll4_m5_ck = dpll4_m5_ck_3630;
- dpll4_m6_ck = dpll4_m6_ck_3630;
-
- /*
+ *
* For 3630: override clkops_omap2_dflt_wait for the
* clocks affected from PWRDN reset Limitation
*/
&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
dpll4_m6x2_ck.ops =
&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
- } else {
- /*
- * XXX This type of dynamic rewriting of the clock tree is
- * deprecated and should be revised soon.
- */
- dpll4_m2_ck = dpll4_m2_ck_34xx;
- dpll4_m3_ck = dpll4_m3_ck_34xx;
- dpll4_m4_ck = dpll4_m4_ck_34xx;
- dpll4_m5_ck = dpll4_m5_ck_34xx;
- dpll4_m6_ck = dpll4_m6_ck_34xx;
}
+ /*
+ * XXX This type of dynamic rewriting of the clock tree is
+ * deprecated and should be revised soon.
+ */
if (cpu_is_omap3630())
dpll4_dd = dpll4_dd_3630;
else
CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X),
CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X),
CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X),
+ CLK("mmci-omap-hs.0", "ick", &dummy_ck, CK_443X),
+ CLK("mmci-omap-hs.1", "ick", &dummy_ck, CK_443X),
+ CLK("mmci-omap-hs.2", "ick", &dummy_ck, CK_443X),
+ CLK("mmci-omap-hs.3", "ick", &dummy_ck, CK_443X),
+ CLK("mmci-omap-hs.4", "ick", &dummy_ck, CK_443X),
CLK(NULL, "uart1_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart2_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart3_ick", &dummy_ck, CK_443X),
/* clksel_rate data common to 24xx/343x */
const struct clksel_rate gpt_32k_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
{ .div = 0 }
};
const struct clksel_rate gpt_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
{ .div = 0 }
};
const struct clksel_rate gfx_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
- { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
+ { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
+ { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
+ { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
+ { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
{ .div = 0 }
};
if (cpu_is_omap24xx()) {
- cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
+ cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (cpu_is_omap24xx()) {
- cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
+ cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
static struct clockdomain mpu0_44xx_clkdm = {
.name = "mpu0_clkdm",
.pwrdm = { .name = "cpu0_pwrdm" },
- .clkstctrl_reg = OMAP4430_CM_PDA_CPU0_CLKSTCTRL,
+ .clkstctrl_reg = OMAP4430_CM_CPU0_CLKSTCTRL,
.clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
static struct clockdomain mpu1_44xx_clkdm = {
.name = "mpu1_clkdm",
.pwrdm = { .name = "cpu1_pwrdm" },
- .clkstctrl_reg = OMAP4430_CM_PDA_CPU1_CLKSTCTRL,
+ .clkstctrl_reg = OMAP4430_CM_CPU1_CLKSTCTRL,
.clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
#define OMAP24XX_EN_CAM_SHIFT 31
-#define OMAP24XX_EN_CAM (1 << 31)
+#define OMAP24XX_EN_CAM_MASK (1 << 31)
#define OMAP24XX_EN_WDT4_SHIFT 29
-#define OMAP24XX_EN_WDT4 (1 << 29)
+#define OMAP24XX_EN_WDT4_MASK (1 << 29)
#define OMAP2420_EN_WDT3_SHIFT 28
-#define OMAP2420_EN_WDT3 (1 << 28)
+#define OMAP2420_EN_WDT3_MASK (1 << 28)
#define OMAP24XX_EN_MSPRO_SHIFT 27
-#define OMAP24XX_EN_MSPRO (1 << 27)
+#define OMAP24XX_EN_MSPRO_MASK (1 << 27)
#define OMAP24XX_EN_FAC_SHIFT 25
-#define OMAP24XX_EN_FAC (1 << 25)
+#define OMAP24XX_EN_FAC_MASK (1 << 25)
#define OMAP2420_EN_EAC_SHIFT 24
-#define OMAP2420_EN_EAC (1 << 24)
+#define OMAP2420_EN_EAC_MASK (1 << 24)
#define OMAP24XX_EN_HDQ_SHIFT 23
-#define OMAP24XX_EN_HDQ (1 << 23)
+#define OMAP24XX_EN_HDQ_MASK (1 << 23)
#define OMAP2420_EN_I2C2_SHIFT 20
-#define OMAP2420_EN_I2C2 (1 << 20)
+#define OMAP2420_EN_I2C2_MASK (1 << 20)
#define OMAP2420_EN_I2C1_SHIFT 19
-#define OMAP2420_EN_I2C1 (1 << 19)
+#define OMAP2420_EN_I2C1_MASK (1 << 19)
/* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */
#define OMAP2430_EN_MCBSP5_SHIFT 5
-#define OMAP2430_EN_MCBSP5 (1 << 5)
+#define OMAP2430_EN_MCBSP5_MASK (1 << 5)
#define OMAP2430_EN_MCBSP4_SHIFT 4
-#define OMAP2430_EN_MCBSP4 (1 << 4)
+#define OMAP2430_EN_MCBSP4_MASK (1 << 4)
#define OMAP2430_EN_MCBSP3_SHIFT 3
-#define OMAP2430_EN_MCBSP3 (1 << 3)
+#define OMAP2430_EN_MCBSP3_MASK (1 << 3)
#define OMAP24XX_EN_SSI_SHIFT 1
-#define OMAP24XX_EN_SSI (1 << 1)
+#define OMAP24XX_EN_SSI_MASK (1 << 1)
/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
#define OMAP24XX_EN_MPU_WDT_SHIFT 3
-#define OMAP24XX_EN_MPU_WDT (1 << 3)
+#define OMAP24XX_EN_MPU_WDT_MASK (1 << 3)
/* Bits specific to each register */
/* CM_IDLEST_MPU */
/* 2430 only */
-#define OMAP2430_ST_MPU (1 << 0)
+#define OMAP2430_ST_MPU_MASK (1 << 0)
/* CM_CLKSEL_MPU */
#define OMAP24XX_CLKSEL_MPU_SHIFT 0
/* CM_FCLKEN1_CORE specific bits*/
#define OMAP24XX_EN_TV_SHIFT 2
-#define OMAP24XX_EN_TV (1 << 2)
+#define OMAP24XX_EN_TV_MASK (1 << 2)
#define OMAP24XX_EN_DSS2_SHIFT 1
-#define OMAP24XX_EN_DSS2 (1 << 1)
+#define OMAP24XX_EN_DSS2_MASK (1 << 1)
#define OMAP24XX_EN_DSS1_SHIFT 0
-#define OMAP24XX_EN_DSS1 (1 << 0)
+#define OMAP24XX_EN_DSS1_MASK (1 << 0)
/* CM_FCLKEN2_CORE specific bits */
#define OMAP2430_EN_I2CHS2_SHIFT 20
-#define OMAP2430_EN_I2CHS2 (1 << 20)
+#define OMAP2430_EN_I2CHS2_MASK (1 << 20)
#define OMAP2430_EN_I2CHS1_SHIFT 19
-#define OMAP2430_EN_I2CHS1 (1 << 19)
+#define OMAP2430_EN_I2CHS1_MASK (1 << 19)
#define OMAP2430_EN_MMCHSDB2_SHIFT 17
-#define OMAP2430_EN_MMCHSDB2 (1 << 17)
+#define OMAP2430_EN_MMCHSDB2_MASK (1 << 17)
#define OMAP2430_EN_MMCHSDB1_SHIFT 16
-#define OMAP2430_EN_MMCHSDB1 (1 << 16)
+#define OMAP2430_EN_MMCHSDB1_MASK (1 << 16)
/* CM_ICLKEN1_CORE specific bits */
#define OMAP24XX_EN_MAILBOXES_SHIFT 30
-#define OMAP24XX_EN_MAILBOXES (1 << 30)
+#define OMAP24XX_EN_MAILBOXES_MASK (1 << 30)
#define OMAP24XX_EN_DSS_SHIFT 0
-#define OMAP24XX_EN_DSS (1 << 0)
+#define OMAP24XX_EN_DSS_MASK (1 << 0)
/* CM_ICLKEN2_CORE specific bits */
/* CM_ICLKEN3_CORE */
/* 2430 only */
#define OMAP2430_EN_SDRC_SHIFT 2
-#define OMAP2430_EN_SDRC (1 << 2)
+#define OMAP2430_EN_SDRC_MASK (1 << 2)
/* CM_ICLKEN4_CORE */
#define OMAP24XX_EN_PKA_SHIFT 4
-#define OMAP24XX_EN_PKA (1 << 4)
+#define OMAP24XX_EN_PKA_MASK (1 << 4)
#define OMAP24XX_EN_AES_SHIFT 3
-#define OMAP24XX_EN_AES (1 << 3)
+#define OMAP24XX_EN_AES_MASK (1 << 3)
#define OMAP24XX_EN_RNG_SHIFT 2
-#define OMAP24XX_EN_RNG (1 << 2)
+#define OMAP24XX_EN_RNG_MASK (1 << 2)
#define OMAP24XX_EN_SHA_SHIFT 1
-#define OMAP24XX_EN_SHA (1 << 1)
+#define OMAP24XX_EN_SHA_MASK (1 << 1)
#define OMAP24XX_EN_DES_SHIFT 0
-#define OMAP24XX_EN_DES (1 << 0)
+#define OMAP24XX_EN_DES_MASK (1 << 0)
/* CM_IDLEST1_CORE specific bits */
#define OMAP24XX_ST_MAILBOXES_SHIFT 30
/* CM_IDLEST2_CORE */
#define OMAP2430_ST_MCBSP5_SHIFT 5
#define OMAP2430_ST_MCBSP5_MASK (1 << 5)
-#define OMAP2430_ST_MCBSP4_SHIFT 4
+#define OMAP2430_ST_MCBSP4_SHIFT 4
#define OMAP2430_ST_MCBSP4_MASK (1 << 4)
-#define OMAP2430_ST_MCBSP3_SHIFT 3
+#define OMAP2430_ST_MCBSP3_SHIFT 3
#define OMAP2430_ST_MCBSP3_MASK (1 << 3)
#define OMAP24XX_ST_SSI_SHIFT 1
#define OMAP24XX_ST_SSI_MASK (1 << 1)
#define OMAP24XX_ST_DES_MASK (1 << 0)
/* CM_AUTOIDLE1_CORE */
-#define OMAP24XX_AUTO_CAM (1 << 31)
-#define OMAP24XX_AUTO_MAILBOXES (1 << 30)
-#define OMAP24XX_AUTO_WDT4 (1 << 29)
-#define OMAP2420_AUTO_WDT3 (1 << 28)
-#define OMAP24XX_AUTO_MSPRO (1 << 27)
-#define OMAP2420_AUTO_MMC (1 << 26)
-#define OMAP24XX_AUTO_FAC (1 << 25)
-#define OMAP2420_AUTO_EAC (1 << 24)
-#define OMAP24XX_AUTO_HDQ (1 << 23)
-#define OMAP24XX_AUTO_UART2 (1 << 22)
-#define OMAP24XX_AUTO_UART1 (1 << 21)
-#define OMAP24XX_AUTO_I2C2 (1 << 20)
-#define OMAP24XX_AUTO_I2C1 (1 << 19)
-#define OMAP24XX_AUTO_MCSPI2 (1 << 18)
-#define OMAP24XX_AUTO_MCSPI1 (1 << 17)
-#define OMAP24XX_AUTO_MCBSP2 (1 << 16)
-#define OMAP24XX_AUTO_MCBSP1 (1 << 15)
-#define OMAP24XX_AUTO_GPT12 (1 << 14)
-#define OMAP24XX_AUTO_GPT11 (1 << 13)
-#define OMAP24XX_AUTO_GPT10 (1 << 12)
-#define OMAP24XX_AUTO_GPT9 (1 << 11)
-#define OMAP24XX_AUTO_GPT8 (1 << 10)
-#define OMAP24XX_AUTO_GPT7 (1 << 9)
-#define OMAP24XX_AUTO_GPT6 (1 << 8)
-#define OMAP24XX_AUTO_GPT5 (1 << 7)
-#define OMAP24XX_AUTO_GPT4 (1 << 6)
-#define OMAP24XX_AUTO_GPT3 (1 << 5)
-#define OMAP24XX_AUTO_GPT2 (1 << 4)
-#define OMAP2420_AUTO_VLYNQ (1 << 3)
-#define OMAP24XX_AUTO_DSS (1 << 0)
+#define OMAP24XX_AUTO_CAM_MASK (1 << 31)
+#define OMAP24XX_AUTO_MAILBOXES_MASK (1 << 30)
+#define OMAP24XX_AUTO_WDT4_MASK (1 << 29)
+#define OMAP2420_AUTO_WDT3_MASK (1 << 28)
+#define OMAP24XX_AUTO_MSPRO_MASK (1 << 27)
+#define OMAP2420_AUTO_MMC_MASK (1 << 26)
+#define OMAP24XX_AUTO_FAC_MASK (1 << 25)
+#define OMAP2420_AUTO_EAC_MASK (1 << 24)
+#define OMAP24XX_AUTO_HDQ_MASK (1 << 23)
+#define OMAP24XX_AUTO_UART2_MASK (1 << 22)
+#define OMAP24XX_AUTO_UART1_MASK (1 << 21)
+#define OMAP24XX_AUTO_I2C2_MASK (1 << 20)
+#define OMAP24XX_AUTO_I2C1_MASK (1 << 19)
+#define OMAP24XX_AUTO_MCSPI2_MASK (1 << 18)
+#define OMAP24XX_AUTO_MCSPI1_MASK (1 << 17)
+#define OMAP24XX_AUTO_MCBSP2_MASK (1 << 16)
+#define OMAP24XX_AUTO_MCBSP1_MASK (1 << 15)
+#define OMAP24XX_AUTO_GPT12_MASK (1 << 14)
+#define OMAP24XX_AUTO_GPT11_MASK (1 << 13)
+#define OMAP24XX_AUTO_GPT10_MASK (1 << 12)
+#define OMAP24XX_AUTO_GPT9_MASK (1 << 11)
+#define OMAP24XX_AUTO_GPT8_MASK (1 << 10)
+#define OMAP24XX_AUTO_GPT7_MASK (1 << 9)
+#define OMAP24XX_AUTO_GPT6_MASK (1 << 8)
+#define OMAP24XX_AUTO_GPT5_MASK (1 << 7)
+#define OMAP24XX_AUTO_GPT4_MASK (1 << 6)
+#define OMAP24XX_AUTO_GPT3_MASK (1 << 5)
+#define OMAP24XX_AUTO_GPT2_MASK (1 << 4)
+#define OMAP2420_AUTO_VLYNQ_MASK (1 << 3)
+#define OMAP24XX_AUTO_DSS_MASK (1 << 0)
/* CM_AUTOIDLE2_CORE */
-#define OMAP2430_AUTO_MDM_INTC (1 << 11)
-#define OMAP2430_AUTO_GPIO5 (1 << 10)
-#define OMAP2430_AUTO_MCSPI3 (1 << 9)
-#define OMAP2430_AUTO_MMCHS2 (1 << 8)
-#define OMAP2430_AUTO_MMCHS1 (1 << 7)
-#define OMAP2430_AUTO_USBHS (1 << 6)
-#define OMAP2430_AUTO_MCBSP5 (1 << 5)
-#define OMAP2430_AUTO_MCBSP4 (1 << 4)
-#define OMAP2430_AUTO_MCBSP3 (1 << 3)
-#define OMAP24XX_AUTO_UART3 (1 << 2)
-#define OMAP24XX_AUTO_SSI (1 << 1)
-#define OMAP24XX_AUTO_USB (1 << 0)
+#define OMAP2430_AUTO_MDM_INTC_MASK (1 << 11)
+#define OMAP2430_AUTO_GPIO5_MASK (1 << 10)
+#define OMAP2430_AUTO_MCSPI3_MASK (1 << 9)
+#define OMAP2430_AUTO_MMCHS2_MASK (1 << 8)
+#define OMAP2430_AUTO_MMCHS1_MASK (1 << 7)
+#define OMAP2430_AUTO_USBHS_MASK (1 << 6)
+#define OMAP2430_AUTO_MCBSP5_MASK (1 << 5)
+#define OMAP2430_AUTO_MCBSP4_MASK (1 << 4)
+#define OMAP2430_AUTO_MCBSP3_MASK (1 << 3)
+#define OMAP24XX_AUTO_UART3_MASK (1 << 2)
+#define OMAP24XX_AUTO_SSI_MASK (1 << 1)
+#define OMAP24XX_AUTO_USB_MASK (1 << 0)
/* CM_AUTOIDLE3_CORE */
-#define OMAP24XX_AUTO_SDRC (1 << 2)
-#define OMAP24XX_AUTO_GPMC (1 << 1)
-#define OMAP24XX_AUTO_SDMA (1 << 0)
+#define OMAP24XX_AUTO_SDRC_MASK (1 << 2)
+#define OMAP24XX_AUTO_GPMC_MASK (1 << 1)
+#define OMAP24XX_AUTO_SDMA_MASK (1 << 0)
/* CM_AUTOIDLE4_CORE */
-#define OMAP24XX_AUTO_PKA (1 << 4)
-#define OMAP24XX_AUTO_AES (1 << 3)
-#define OMAP24XX_AUTO_RNG (1 << 2)
-#define OMAP24XX_AUTO_SHA (1 << 1)
-#define OMAP24XX_AUTO_DES (1 << 0)
+#define OMAP24XX_AUTO_PKA_MASK (1 << 4)
+#define OMAP24XX_AUTO_AES_MASK (1 << 3)
+#define OMAP24XX_AUTO_RNG_MASK (1 << 2)
+#define OMAP24XX_AUTO_SHA_MASK (1 << 1)
+#define OMAP24XX_AUTO_DES_MASK (1 << 0)
/* CM_CLKSEL1_CORE */
#define OMAP24XX_CLKSEL_USB_SHIFT 25
/* CM_FCLKEN_GFX */
#define OMAP24XX_EN_3D_SHIFT 2
-#define OMAP24XX_EN_3D (1 << 2)
+#define OMAP24XX_EN_3D_MASK (1 << 2)
#define OMAP24XX_EN_2D_SHIFT 1
-#define OMAP24XX_EN_2D (1 << 1)
+#define OMAP24XX_EN_2D_MASK (1 << 1)
/* CM_ICLKEN_GFX specific bits */
/* CM_ICLKEN_WKUP specific bits */
#define OMAP2430_EN_ICR_SHIFT 6
-#define OMAP2430_EN_ICR (1 << 6)
+#define OMAP2430_EN_ICR_MASK (1 << 6)
#define OMAP24XX_EN_OMAPCTRL_SHIFT 5
-#define OMAP24XX_EN_OMAPCTRL (1 << 5)
+#define OMAP24XX_EN_OMAPCTRL_MASK (1 << 5)
#define OMAP24XX_EN_WDT1_SHIFT 4
-#define OMAP24XX_EN_WDT1 (1 << 4)
+#define OMAP24XX_EN_WDT1_MASK (1 << 4)
#define OMAP24XX_EN_32KSYNC_SHIFT 1
-#define OMAP24XX_EN_32KSYNC (1 << 1)
+#define OMAP24XX_EN_32KSYNC_MASK (1 << 1)
/* CM_IDLEST_WKUP specific bits */
#define OMAP2430_ST_ICR_SHIFT 6
#define OMAP24XX_ST_32KSYNC_MASK (1 << 1)
/* CM_AUTOIDLE_WKUP */
-#define OMAP24XX_AUTO_OMAPCTRL (1 << 5)
-#define OMAP24XX_AUTO_WDT1 (1 << 4)
-#define OMAP24XX_AUTO_MPU_WDT (1 << 3)
-#define OMAP24XX_AUTO_GPIOS (1 << 2)
-#define OMAP24XX_AUTO_32KSYNC (1 << 1)
-#define OMAP24XX_AUTO_GPT1 (1 << 0)
+#define OMAP24XX_AUTO_OMAPCTRL_MASK (1 << 5)
+#define OMAP24XX_AUTO_WDT1_MASK (1 << 4)
+#define OMAP24XX_AUTO_MPU_WDT_MASK (1 << 3)
+#define OMAP24XX_AUTO_GPIOS_MASK (1 << 2)
+#define OMAP24XX_AUTO_32KSYNC_MASK (1 << 1)
+#define OMAP24XX_AUTO_GPT1_MASK (1 << 0)
/* CM_CLKSEL_WKUP */
#define OMAP24XX_CLKSEL_GPT1_SHIFT 0
#define OMAP24XX_EN_DPLL_MASK (0x3 << 0)
/* CM_IDLEST_CKGEN */
-#define OMAP24XX_ST_54M_APLL (1 << 9)
-#define OMAP24XX_ST_96M_APLL (1 << 8)
-#define OMAP24XX_ST_54M_CLK (1 << 6)
-#define OMAP24XX_ST_12M_CLK (1 << 5)
-#define OMAP24XX_ST_48M_CLK (1 << 4)
-#define OMAP24XX_ST_96M_CLK (1 << 2)
+#define OMAP24XX_ST_54M_APLL_MASK (1 << 9)
+#define OMAP24XX_ST_96M_APLL_MASK (1 << 8)
+#define OMAP24XX_ST_54M_CLK_MASK (1 << 6)
+#define OMAP24XX_ST_12M_CLK_MASK (1 << 5)
+#define OMAP24XX_ST_48M_CLK_MASK (1 << 4)
+#define OMAP24XX_ST_96M_CLK_MASK (1 << 2)
#define OMAP24XX_ST_CORE_CLK_SHIFT 0
#define OMAP24XX_ST_CORE_CLK_MASK (0x3 << 0)
#define OMAP24XX_DPLL_DIV_SHIFT 8
#define OMAP24XX_DPLL_DIV_MASK (0xf << 8)
#define OMAP24XX_54M_SOURCE_SHIFT 5
-#define OMAP24XX_54M_SOURCE (1 << 5)
+#define OMAP24XX_54M_SOURCE_MASK (1 << 5)
#define OMAP2430_96M_SOURCE_SHIFT 4
-#define OMAP2430_96M_SOURCE (1 << 4)
+#define OMAP2430_96M_SOURCE_MASK (1 << 4)
#define OMAP24XX_48M_SOURCE_SHIFT 3
-#define OMAP24XX_48M_SOURCE (1 << 3)
+#define OMAP24XX_48M_SOURCE_MASK (1 << 3)
#define OMAP2430_ALTCLK_SOURCE_SHIFT 0
#define OMAP2430_ALTCLK_SOURCE_MASK (0x7 << 0)
/* CM_FCLKEN_DSP */
#define OMAP2420_EN_IVA_COP_SHIFT 10
-#define OMAP2420_EN_IVA_COP (1 << 10)
+#define OMAP2420_EN_IVA_COP_MASK (1 << 10)
#define OMAP2420_EN_IVA_MPU_SHIFT 8
-#define OMAP2420_EN_IVA_MPU (1 << 8)
+#define OMAP2420_EN_IVA_MPU_MASK (1 << 8)
#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT 0
-#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP (1 << 0)
+#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_MASK (1 << 0)
/* CM_ICLKEN_DSP */
#define OMAP2420_EN_DSP_IPI_SHIFT 1
-#define OMAP2420_EN_DSP_IPI (1 << 1)
+#define OMAP2420_EN_DSP_IPI_MASK (1 << 1)
/* CM_IDLEST_DSP */
-#define OMAP2420_ST_IVA (1 << 8)
-#define OMAP2420_ST_IPI (1 << 1)
-#define OMAP24XX_ST_DSP (1 << 0)
+#define OMAP2420_ST_IVA_MASK (1 << 8)
+#define OMAP2420_ST_IPI_MASK (1 << 1)
+#define OMAP24XX_ST_DSP_MASK (1 << 0)
/* CM_AUTOIDLE_DSP */
-#define OMAP2420_AUTO_DSP_IPI (1 << 1)
+#define OMAP2420_AUTO_DSP_IPI_MASK (1 << 1)
/* CM_CLKSEL_DSP */
-#define OMAP2420_SYNC_IVA (1 << 13)
+#define OMAP2420_SYNC_IVA_MASK (1 << 13)
#define OMAP2420_CLKSEL_IVA_SHIFT 8
#define OMAP2420_CLKSEL_IVA_MASK (0x1f << 8)
-#define OMAP24XX_SYNC_DSP (1 << 7)
+#define OMAP24XX_SYNC_DSP_MASK (1 << 7)
#define OMAP24XX_CLKSEL_DSP_IF_SHIFT 5
#define OMAP24XX_CLKSEL_DSP_IF_MASK (0x3 << 5)
#define OMAP24XX_CLKSEL_DSP_SHIFT 0
/* CM_FCLKEN_MDM */
/* 2430 only */
#define OMAP2430_EN_OSC_SHIFT 1
-#define OMAP2430_EN_OSC (1 << 1)
+#define OMAP2430_EN_OSC_MASK (1 << 1)
/* CM_ICLKEN_MDM */
/* 2430 only */
#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT 0
-#define OMAP2430_CM_ICLKEN_MDM_EN_MDM (1 << 0)
+#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_MASK (1 << 0)
/* CM_IDLEST_MDM specific bits */
/* 2430 only */
/* CM_AUTOIDLE_MDM */
/* 2430 only */
-#define OMAP2430_AUTO_OSC (1 << 1)
-#define OMAP2430_AUTO_MDM (1 << 0)
+#define OMAP2430_AUTO_OSC_MASK (1 << 1)
+#define OMAP2430_AUTO_MDM_MASK (1 << 0)
/* CM_CLKSEL_MDM */
/* 2430 only */
-#define OMAP2430_SYNC_MDM (1 << 4)
+#define OMAP2430_SYNC_MDM_MASK (1 << 4)
#define OMAP2430_CLKSEL_MDM_SHIFT 0
#define OMAP2430_CLKSEL_MDM_MASK (0xf << 0)
/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
#define OMAP3430ES2_EN_MMC3_MASK (1 << 30)
#define OMAP3430ES2_EN_MMC3_SHIFT 30
-#define OMAP3430_EN_MSPRO (1 << 23)
+#define OMAP3430_EN_MSPRO_MASK (1 << 23)
#define OMAP3430_EN_MSPRO_SHIFT 23
-#define OMAP3430_EN_HDQ (1 << 22)
+#define OMAP3430_EN_HDQ_MASK (1 << 22)
#define OMAP3430_EN_HDQ_SHIFT 22
-#define OMAP3430ES1_EN_FSHOSTUSB (1 << 5)
+#define OMAP3430ES1_EN_FSHOSTUSB_MASK (1 << 5)
#define OMAP3430ES1_EN_FSHOSTUSB_SHIFT 5
-#define OMAP3430ES1_EN_D2D (1 << 3)
+#define OMAP3430ES1_EN_D2D_MASK (1 << 3)
#define OMAP3430ES1_EN_D2D_SHIFT 3
-#define OMAP3430_EN_SSI (1 << 0)
+#define OMAP3430_EN_SSI_MASK (1 << 0)
#define OMAP3430_EN_SSI_SHIFT 0
/* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */
#define OMAP3430ES2_EN_USBTLL_MASK (1 << 2)
/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
-#define OMAP3430_EN_WDT2 (1 << 5)
+#define OMAP3430_EN_WDT2_MASK (1 << 5)
#define OMAP3430_EN_WDT2_SHIFT 5
/* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */
-#define OMAP3430_EN_CAM (1 << 0)
+#define OMAP3430_EN_CAM_MASK (1 << 0)
#define OMAP3430_EN_CAM_SHIFT 0
/* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */
-#define OMAP3430_EN_WDT3 (1 << 12)
+#define OMAP3430_EN_WDT3_MASK (1 << 12)
#define OMAP3430_EN_WDT3_SHIFT 12
/* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */
-#define OMAP3430_OVERRIDE_ENABLE (1 << 19)
+#define OMAP3430_OVERRIDE_ENABLE_MASK (1 << 19)
/* Bits specific to each register */
#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0)
/* CM_IDLEST_IVA2 */
-#define OMAP3430_ST_IVA2 (1 << 0)
+#define OMAP3430_ST_IVA2_MASK (1 << 0)
/* CM_IDLEST_PLL_IVA2 */
#define OMAP3430_ST_IVA2_CLK_SHIFT 0
#define OMAP3430_EN_MPU_DPLL_MASK (0x7 << 0)
/* CM_IDLEST_MPU */
-#define OMAP3430_ST_MPU (1 << 0)
+#define OMAP3430_ST_MPU_MASK (1 << 0)
/* CM_IDLEST_PLL_MPU */
#define OMAP3430_ST_MPU_CLK_SHIFT 0
#define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0)
/* CM_FCLKEN1_CORE specific bits */
-#define OMAP3430_EN_MODEM (1 << 31)
+#define OMAP3430_EN_MODEM_MASK (1 << 31)
#define OMAP3430_EN_MODEM_SHIFT 31
/* CM_ICLKEN1_CORE specific bits */
-#define OMAP3430_EN_ICR (1 << 29)
+#define OMAP3430_EN_ICR_MASK (1 << 29)
#define OMAP3430_EN_ICR_SHIFT 29
-#define OMAP3430_EN_AES2 (1 << 28)
+#define OMAP3430_EN_AES2_MASK (1 << 28)
#define OMAP3430_EN_AES2_SHIFT 28
-#define OMAP3430_EN_SHA12 (1 << 27)
+#define OMAP3430_EN_SHA12_MASK (1 << 27)
#define OMAP3430_EN_SHA12_SHIFT 27
-#define OMAP3430_EN_DES2 (1 << 26)
+#define OMAP3430_EN_DES2_MASK (1 << 26)
#define OMAP3430_EN_DES2_SHIFT 26
-#define OMAP3430ES1_EN_FAC (1 << 8)
+#define OMAP3430ES1_EN_FAC_MASK (1 << 8)
#define OMAP3430ES1_EN_FAC_SHIFT 8
-#define OMAP3430_EN_MAILBOXES (1 << 7)
+#define OMAP3430_EN_MAILBOXES_MASK (1 << 7)
#define OMAP3430_EN_MAILBOXES_SHIFT 7
-#define OMAP3430_EN_OMAPCTRL (1 << 6)
+#define OMAP3430_EN_OMAPCTRL_MASK (1 << 6)
#define OMAP3430_EN_OMAPCTRL_SHIFT 6
-#define OMAP3430_EN_SAD2D (1 << 3)
+#define OMAP3430_EN_SAD2D_MASK (1 << 3)
#define OMAP3430_EN_SAD2D_SHIFT 3
-#define OMAP3430_EN_SDRC (1 << 1)
+#define OMAP3430_EN_SDRC_MASK (1 << 1)
#define OMAP3430_EN_SDRC_SHIFT 1
/* AM35XX specific CM_ICLKEN1_CORE bits */
#define AM35XX_EN_IPSS_MASK (1 << 4)
#define AM35XX_EN_IPSS_SHIFT 4
-#define AM35XX_EN_UART4_MASK (1 << 23)
+#define AM35XX_EN_UART4_MASK (1 << 23)
#define AM35XX_EN_UART4_SHIFT 23
/* CM_ICLKEN2_CORE */
-#define OMAP3430_EN_PKA (1 << 4)
+#define OMAP3430_EN_PKA_MASK (1 << 4)
#define OMAP3430_EN_PKA_SHIFT 4
-#define OMAP3430_EN_AES1 (1 << 3)
+#define OMAP3430_EN_AES1_MASK (1 << 3)
#define OMAP3430_EN_AES1_SHIFT 3
-#define OMAP3430_EN_RNG (1 << 2)
+#define OMAP3430_EN_RNG_MASK (1 << 2)
#define OMAP3430_EN_RNG_SHIFT 2
-#define OMAP3430_EN_SHA11 (1 << 1)
+#define OMAP3430_EN_SHA11_MASK (1 << 1)
#define OMAP3430_EN_SHA11_SHIFT 1
-#define OMAP3430_EN_DES1 (1 << 0)
+#define OMAP3430_EN_DES1_MASK (1 << 0)
#define OMAP3430_EN_DES1_SHIFT 0
/* CM_ICLKEN3_CORE */
#define OMAP3430_EN_MAD2D_SHIFT 3
-#define OMAP3430_EN_MAD2D (1 << 3)
+#define OMAP3430_EN_MAD2D_MASK (1 << 3)
/* CM_FCLKEN3_CORE specific bits */
#define OMAP3430ES2_EN_TS_SHIFT 1
#define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0)
/* CM_AUTOIDLE1_CORE */
-#define OMAP3430_AUTO_MODEM (1 << 31)
+#define OMAP3430_AUTO_MODEM_MASK (1 << 31)
#define OMAP3430_AUTO_MODEM_SHIFT 31
-#define OMAP3430ES2_AUTO_MMC3 (1 << 30)
+#define OMAP3430ES2_AUTO_MMC3_MASK (1 << 30)
#define OMAP3430ES2_AUTO_MMC3_SHIFT 30
-#define OMAP3430ES2_AUTO_ICR (1 << 29)
+#define OMAP3430ES2_AUTO_ICR_MASK (1 << 29)
#define OMAP3430ES2_AUTO_ICR_SHIFT 29
-#define OMAP3430_AUTO_AES2 (1 << 28)
+#define OMAP3430_AUTO_AES2_MASK (1 << 28)
#define OMAP3430_AUTO_AES2_SHIFT 28
-#define OMAP3430_AUTO_SHA12 (1 << 27)
+#define OMAP3430_AUTO_SHA12_MASK (1 << 27)
#define OMAP3430_AUTO_SHA12_SHIFT 27
-#define OMAP3430_AUTO_DES2 (1 << 26)
+#define OMAP3430_AUTO_DES2_MASK (1 << 26)
#define OMAP3430_AUTO_DES2_SHIFT 26
-#define OMAP3430_AUTO_MMC2 (1 << 25)
+#define OMAP3430_AUTO_MMC2_MASK (1 << 25)
#define OMAP3430_AUTO_MMC2_SHIFT 25
-#define OMAP3430_AUTO_MMC1 (1 << 24)
+#define OMAP3430_AUTO_MMC1_MASK (1 << 24)
#define OMAP3430_AUTO_MMC1_SHIFT 24
-#define OMAP3430_AUTO_MSPRO (1 << 23)
+#define OMAP3430_AUTO_MSPRO_MASK (1 << 23)
#define OMAP3430_AUTO_MSPRO_SHIFT 23
-#define OMAP3430_AUTO_HDQ (1 << 22)
+#define OMAP3430_AUTO_HDQ_MASK (1 << 22)
#define OMAP3430_AUTO_HDQ_SHIFT 22
-#define OMAP3430_AUTO_MCSPI4 (1 << 21)
+#define OMAP3430_AUTO_MCSPI4_MASK (1 << 21)
#define OMAP3430_AUTO_MCSPI4_SHIFT 21
-#define OMAP3430_AUTO_MCSPI3 (1 << 20)
+#define OMAP3430_AUTO_MCSPI3_MASK (1 << 20)
#define OMAP3430_AUTO_MCSPI3_SHIFT 20
-#define OMAP3430_AUTO_MCSPI2 (1 << 19)
+#define OMAP3430_AUTO_MCSPI2_MASK (1 << 19)
#define OMAP3430_AUTO_MCSPI2_SHIFT 19
-#define OMAP3430_AUTO_MCSPI1 (1 << 18)
+#define OMAP3430_AUTO_MCSPI1_MASK (1 << 18)
#define OMAP3430_AUTO_MCSPI1_SHIFT 18
-#define OMAP3430_AUTO_I2C3 (1 << 17)
+#define OMAP3430_AUTO_I2C3_MASK (1 << 17)
#define OMAP3430_AUTO_I2C3_SHIFT 17
-#define OMAP3430_AUTO_I2C2 (1 << 16)
+#define OMAP3430_AUTO_I2C2_MASK (1 << 16)
#define OMAP3430_AUTO_I2C2_SHIFT 16
-#define OMAP3430_AUTO_I2C1 (1 << 15)
+#define OMAP3430_AUTO_I2C1_MASK (1 << 15)
#define OMAP3430_AUTO_I2C1_SHIFT 15
-#define OMAP3430_AUTO_UART2 (1 << 14)
+#define OMAP3430_AUTO_UART2_MASK (1 << 14)
#define OMAP3430_AUTO_UART2_SHIFT 14
-#define OMAP3430_AUTO_UART1 (1 << 13)
+#define OMAP3430_AUTO_UART1_MASK (1 << 13)
#define OMAP3430_AUTO_UART1_SHIFT 13
-#define OMAP3430_AUTO_GPT11 (1 << 12)
+#define OMAP3430_AUTO_GPT11_MASK (1 << 12)
#define OMAP3430_AUTO_GPT11_SHIFT 12
-#define OMAP3430_AUTO_GPT10 (1 << 11)
+#define OMAP3430_AUTO_GPT10_MASK (1 << 11)
#define OMAP3430_AUTO_GPT10_SHIFT 11
-#define OMAP3430_AUTO_MCBSP5 (1 << 10)
+#define OMAP3430_AUTO_MCBSP5_MASK (1 << 10)
#define OMAP3430_AUTO_MCBSP5_SHIFT 10
-#define OMAP3430_AUTO_MCBSP1 (1 << 9)
+#define OMAP3430_AUTO_MCBSP1_MASK (1 << 9)
#define OMAP3430_AUTO_MCBSP1_SHIFT 9
-#define OMAP3430ES1_AUTO_FAC (1 << 8)
+#define OMAP3430ES1_AUTO_FAC_MASK (1 << 8)
#define OMAP3430ES1_AUTO_FAC_SHIFT 8
-#define OMAP3430_AUTO_MAILBOXES (1 << 7)
+#define OMAP3430_AUTO_MAILBOXES_MASK (1 << 7)
#define OMAP3430_AUTO_MAILBOXES_SHIFT 7
-#define OMAP3430_AUTO_OMAPCTRL (1 << 6)
+#define OMAP3430_AUTO_OMAPCTRL_MASK (1 << 6)
#define OMAP3430_AUTO_OMAPCTRL_SHIFT 6
-#define OMAP3430ES1_AUTO_FSHOSTUSB (1 << 5)
+#define OMAP3430ES1_AUTO_FSHOSTUSB_MASK (1 << 5)
#define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT 5
-#define OMAP3430_AUTO_HSOTGUSB (1 << 4)
+#define OMAP3430_AUTO_HSOTGUSB_MASK (1 << 4)
#define OMAP3430_AUTO_HSOTGUSB_SHIFT 4
-#define OMAP3430ES1_AUTO_D2D (1 << 3)
+#define OMAP3430ES1_AUTO_D2D_MASK (1 << 3)
#define OMAP3430ES1_AUTO_D2D_SHIFT 3
-#define OMAP3430_AUTO_SAD2D (1 << 3)
+#define OMAP3430_AUTO_SAD2D_MASK (1 << 3)
#define OMAP3430_AUTO_SAD2D_SHIFT 3
-#define OMAP3430_AUTO_SSI (1 << 0)
+#define OMAP3430_AUTO_SSI_MASK (1 << 0)
#define OMAP3430_AUTO_SSI_SHIFT 0
/* CM_AUTOIDLE2_CORE */
-#define OMAP3430_AUTO_PKA (1 << 4)
+#define OMAP3430_AUTO_PKA_MASK (1 << 4)
#define OMAP3430_AUTO_PKA_SHIFT 4
-#define OMAP3430_AUTO_AES1 (1 << 3)
+#define OMAP3430_AUTO_AES1_MASK (1 << 3)
#define OMAP3430_AUTO_AES1_SHIFT 3
-#define OMAP3430_AUTO_RNG (1 << 2)
+#define OMAP3430_AUTO_RNG_MASK (1 << 2)
#define OMAP3430_AUTO_RNG_SHIFT 2
-#define OMAP3430_AUTO_SHA11 (1 << 1)
+#define OMAP3430_AUTO_SHA11_MASK (1 << 1)
#define OMAP3430_AUTO_SHA11_SHIFT 1
-#define OMAP3430_AUTO_DES1 (1 << 0)
+#define OMAP3430_AUTO_DES1_MASK (1 << 0)
#define OMAP3430_AUTO_DES1_SHIFT 0
/* CM_AUTOIDLE3_CORE */
#define OMAP3430ES2_AUTO_USBTLL_SHIFT 2
#define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2)
#define OMAP3430_AUTO_MAD2D_SHIFT 3
-#define OMAP3430_AUTO_MAD2D (1 << 3)
+#define OMAP3430_AUTO_MAD2D_MASK (1 << 3)
/* CM_CLKSEL_CORE */
#define OMAP3430_CLKSEL_SSI_SHIFT 8
#define OMAP3430_CLKACTIVITY_L3_MASK (1 << 0)
/* CM_FCLKEN_GFX */
-#define OMAP3430ES1_EN_3D (1 << 2)
+#define OMAP3430ES1_EN_3D_MASK (1 << 2)
#define OMAP3430ES1_EN_3D_SHIFT 2
-#define OMAP3430ES1_EN_2D (1 << 1)
+#define OMAP3430ES1_EN_2D_MASK (1 << 1)
#define OMAP3430ES1_EN_2D_SHIFT 1
/* CM_ICLKEN_GFX specific bits */
#define OMAP3430ES2_EN_USIMOCP_MASK (1 << 9)
/* CM_ICLKEN_WKUP specific bits */
-#define OMAP3430_EN_WDT1 (1 << 4)
+#define OMAP3430_EN_WDT1_MASK (1 << 4)
#define OMAP3430_EN_WDT1_SHIFT 4
-#define OMAP3430_EN_32KSYNC (1 << 2)
+#define OMAP3430_EN_32KSYNC_MASK (1 << 2)
#define OMAP3430_EN_32KSYNC_SHIFT 2
/* CM_IDLEST_WKUP specific bits */
#define OMAP3430_ST_32KSYNC_MASK (1 << 2)
/* CM_AUTOIDLE_WKUP */
-#define OMAP3430ES2_AUTO_USIMOCP (1 << 9)
+#define OMAP3430ES2_AUTO_USIMOCP_MASK (1 << 9)
#define OMAP3430ES2_AUTO_USIMOCP_SHIFT 9
-#define OMAP3430_AUTO_WDT2 (1 << 5)
+#define OMAP3430_AUTO_WDT2_MASK (1 << 5)
#define OMAP3430_AUTO_WDT2_SHIFT 5
-#define OMAP3430_AUTO_WDT1 (1 << 4)
+#define OMAP3430_AUTO_WDT1_MASK (1 << 4)
#define OMAP3430_AUTO_WDT1_SHIFT 4
-#define OMAP3430_AUTO_GPIO1 (1 << 3)
+#define OMAP3430_AUTO_GPIO1_MASK (1 << 3)
#define OMAP3430_AUTO_GPIO1_SHIFT 3
-#define OMAP3430_AUTO_32KSYNC (1 << 2)
+#define OMAP3430_AUTO_32KSYNC_MASK (1 << 2)
#define OMAP3430_AUTO_32KSYNC_SHIFT 2
-#define OMAP3430_AUTO_GPT12 (1 << 1)
+#define OMAP3430_AUTO_GPT12_MASK (1 << 1)
#define OMAP3430_AUTO_GPT12_SHIFT 1
-#define OMAP3430_AUTO_GPT1 (1 << 0)
+#define OMAP3430_AUTO_GPT1_MASK (1 << 0)
#define OMAP3430_AUTO_GPT1_SHIFT 0
/* CM_CLKSEL_WKUP */
#define OMAP3430_EN_CORE_DPLL_MASK (0x7 << 0)
/* CM_CLKEN2_PLL */
-#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT 10
+#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT 10
#define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK (0x3 << 8)
#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT 4
#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK (0xf << 4)
#define OMAP3430ES2_EN_PERIPH2_DPLL_MASK (0x7 << 0)
/* CM_IDLEST_CKGEN */
-#define OMAP3430_ST_54M_CLK (1 << 5)
-#define OMAP3430_ST_12M_CLK (1 << 4)
-#define OMAP3430_ST_48M_CLK (1 << 3)
-#define OMAP3430_ST_96M_CLK (1 << 2)
+#define OMAP3430_ST_54M_CLK_MASK (1 << 5)
+#define OMAP3430_ST_12M_CLK_MASK (1 << 4)
+#define OMAP3430_ST_48M_CLK_MASK (1 << 3)
+#define OMAP3430_ST_96M_CLK_MASK (1 << 2)
#define OMAP3430_ST_PERIPH_CLK_SHIFT 1
#define OMAP3430_ST_PERIPH_CLK_MASK (1 << 1)
#define OMAP3430_ST_CORE_CLK_SHIFT 0
/* CM_CLKOUT_CTRL */
#define OMAP3430_CLKOUT2_EN_SHIFT 7
-#define OMAP3430_CLKOUT2_EN (1 << 7)
+#define OMAP3430_CLKOUT2_EN_MASK (1 << 7)
#define OMAP3430_CLKOUT2_DIV_SHIFT 3
#define OMAP3430_CLKOUT2_DIV_MASK (0x7 << 3)
#define OMAP3430_CLKOUT2SOURCE_SHIFT 0
#define OMAP3430_CLKOUT2SOURCE_MASK (0x3 << 0)
/* CM_FCLKEN_DSS */
-#define OMAP3430_EN_TV (1 << 2)
+#define OMAP3430_EN_TV_MASK (1 << 2)
#define OMAP3430_EN_TV_SHIFT 2
-#define OMAP3430_EN_DSS2 (1 << 1)
+#define OMAP3430_EN_DSS2_MASK (1 << 1)
#define OMAP3430_EN_DSS2_SHIFT 1
-#define OMAP3430_EN_DSS1 (1 << 0)
+#define OMAP3430_EN_DSS1_MASK (1 << 0)
#define OMAP3430_EN_DSS1_SHIFT 0
/* CM_ICLKEN_DSS */
-#define OMAP3430_CM_ICLKEN_DSS_EN_DSS (1 << 0)
+#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_MASK (1 << 0)
#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT 0
/* CM_IDLEST_DSS */
#define OMAP3430ES1_ST_DSS_MASK (1 << 0)
/* CM_AUTOIDLE_DSS */
-#define OMAP3430_AUTO_DSS (1 << 0)
+#define OMAP3430_AUTO_DSS_MASK (1 << 0)
#define OMAP3430_AUTO_DSS_SHIFT 0
/* CM_CLKSEL_DSS */
#define OMAP3430_CLKACTIVITY_DSS_MASK (1 << 0)
/* CM_FCLKEN_CAM specific bits */
-#define OMAP3430_EN_CSI2 (1 << 1)
+#define OMAP3430_EN_CSI2_MASK (1 << 1)
#define OMAP3430_EN_CSI2_SHIFT 1
/* CM_ICLKEN_CAM specific bits */
/* CM_IDLEST_CAM */
-#define OMAP3430_ST_CAM (1 << 0)
+#define OMAP3430_ST_CAM_MASK (1 << 0)
/* CM_AUTOIDLE_CAM */
-#define OMAP3430_AUTO_CAM (1 << 0)
+#define OMAP3430_AUTO_CAM_MASK (1 << 0)
#define OMAP3430_AUTO_CAM_SHIFT 0
/* CM_CLKSEL_CAM */
#define OMAP3430_ST_MCBSP2_MASK (1 << 0)
/* CM_AUTOIDLE_PER */
-#define OMAP3430_AUTO_GPIO6 (1 << 17)
+#define OMAP3430_AUTO_GPIO6_MASK (1 << 17)
#define OMAP3430_AUTO_GPIO6_SHIFT 17
-#define OMAP3430_AUTO_GPIO5 (1 << 16)
+#define OMAP3430_AUTO_GPIO5_MASK (1 << 16)
#define OMAP3430_AUTO_GPIO5_SHIFT 16
-#define OMAP3430_AUTO_GPIO4 (1 << 15)
+#define OMAP3430_AUTO_GPIO4_MASK (1 << 15)
#define OMAP3430_AUTO_GPIO4_SHIFT 15
-#define OMAP3430_AUTO_GPIO3 (1 << 14)
+#define OMAP3430_AUTO_GPIO3_MASK (1 << 14)
#define OMAP3430_AUTO_GPIO3_SHIFT 14
-#define OMAP3430_AUTO_GPIO2 (1 << 13)
+#define OMAP3430_AUTO_GPIO2_MASK (1 << 13)
#define OMAP3430_AUTO_GPIO2_SHIFT 13
-#define OMAP3430_AUTO_WDT3 (1 << 12)
+#define OMAP3430_AUTO_WDT3_MASK (1 << 12)
#define OMAP3430_AUTO_WDT3_SHIFT 12
-#define OMAP3430_AUTO_UART3 (1 << 11)
+#define OMAP3430_AUTO_UART3_MASK (1 << 11)
#define OMAP3430_AUTO_UART3_SHIFT 11
-#define OMAP3430_AUTO_GPT9 (1 << 10)
+#define OMAP3430_AUTO_GPT9_MASK (1 << 10)
#define OMAP3430_AUTO_GPT9_SHIFT 10
-#define OMAP3430_AUTO_GPT8 (1 << 9)
+#define OMAP3430_AUTO_GPT8_MASK (1 << 9)
#define OMAP3430_AUTO_GPT8_SHIFT 9
-#define OMAP3430_AUTO_GPT7 (1 << 8)
+#define OMAP3430_AUTO_GPT7_MASK (1 << 8)
#define OMAP3430_AUTO_GPT7_SHIFT 8
-#define OMAP3430_AUTO_GPT6 (1 << 7)
+#define OMAP3430_AUTO_GPT6_MASK (1 << 7)
#define OMAP3430_AUTO_GPT6_SHIFT 7
-#define OMAP3430_AUTO_GPT5 (1 << 6)
+#define OMAP3430_AUTO_GPT5_MASK (1 << 6)
#define OMAP3430_AUTO_GPT5_SHIFT 6
-#define OMAP3430_AUTO_GPT4 (1 << 5)
+#define OMAP3430_AUTO_GPT4_MASK (1 << 5)
#define OMAP3430_AUTO_GPT4_SHIFT 5
-#define OMAP3430_AUTO_GPT3 (1 << 4)
+#define OMAP3430_AUTO_GPT3_MASK (1 << 4)
#define OMAP3430_AUTO_GPT3_SHIFT 4
-#define OMAP3430_AUTO_GPT2 (1 << 3)
+#define OMAP3430_AUTO_GPT2_MASK (1 << 3)
#define OMAP3430_AUTO_GPT2_SHIFT 3
-#define OMAP3430_AUTO_MCBSP4 (1 << 2)
+#define OMAP3430_AUTO_MCBSP4_MASK (1 << 2)
#define OMAP3430_AUTO_MCBSP4_SHIFT 2
-#define OMAP3430_AUTO_MCBSP3 (1 << 1)
+#define OMAP3430_AUTO_MCBSP3_MASK (1 << 1)
#define OMAP3430_AUTO_MCBSP3_SHIFT 1
-#define OMAP3430_AUTO_MCBSP2 (1 << 0)
+#define OMAP3430_AUTO_MCBSP2_MASK (1 << 0)
#define OMAP3430_AUTO_MCBSP2_SHIFT 0
/* CM_CLKSEL_PER */
#define OMAP3430_CLKSEL_GPT2_SHIFT 0
/* CM_SLEEPDEP_PER specific bits */
-#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2 (1 << 2)
+#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2_MASK (1 << 2)
/* CM_CLKSTCTRL_PER */
#define OMAP3430_CLKTRCTRL_PER_SHIFT 0
#define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK (0x7f << 0)
/* CM_POLCTRL */
-#define OMAP3430_CLKOUT2_POL (1 << 0)
+#define OMAP3430_CLKOUT2_POL_MASK (1 << 0)
/* CM_IDLEST_NEON */
-#define OMAP3430_ST_NEON (1 << 0)
+#define OMAP3430_ST_NEON_MASK (1 << 0)
/* CM_CLKSTCTRL_NEON */
#define OMAP3430_CLKTRCTRL_NEON_SHIFT 0
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
-/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
-#define MAX_MODULE_READY_TIME 20000
-
static const u8 cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
};
extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
u8 idlest_shift);
-extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs);
+extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
/* CM_ICLKEN_GFX */
#define OMAP_EN_GFX_SHIFT 0
-#define OMAP_EN_GFX (1 << 0)
+#define OMAP_EN_GFX_MASK (1 << 0)
/* CM_IDLEST_GFX */
-#define OMAP_ST_GFX (1 << 0)
+#define OMAP_ST_GFX_MASK (1 << 0)
+
/* CM_IDLEST indicator */
#define OMAP24XX_CM_IDLEST_VAL 0
#define OMAP34XX_CM_IDLEST_VAL 1
+/*
+ * MAX_MODULE_READY_TIME: max duration in microseconds to wait for the
+ * PRCM to request that a module exit the inactive state in the case of
+ * OMAP2 & 3.
+ * In the case of OMAP4 this is the max duration in microseconds for the
+ * module to reach the functionnal state from an inactive state.
+ */
+#define MAX_MODULE_READY_TIME 2000
+
#endif
/*
* OMAP44xx CM1 & CM2 instance offset macros
*
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
*
* Paul Walmsley (paul@pwsan.com)
* Rajendra Nayak (rnayak@ti.com)
/* CM1 */
-
/* CM1.OCP_SOCKET_CM1 register offsets */
+#define OMAP4_REVISION_CM1_OFFSET 0x0000
#define OMAP4430_REVISION_CM1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4_CM_CM1_PROFILING_CLKCTRL_OFFSET 0x0040
#define OMAP4430_CM_CM1_PROFILING_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0040)
/* CM1.CKGEN_CM1 register offsets */
+#define OMAP4_CM_CLKSEL_CORE_OFFSET 0x0000
#define OMAP4430_CM_CLKSEL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0000)
+#define OMAP4_CM_CLKSEL_ABE_OFFSET 0x0008
#define OMAP4430_CM_CLKSEL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0008)
+#define OMAP4_CM_DLL_CTRL_OFFSET 0x0010
#define OMAP4430_CM_DLL_CTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0010)
+#define OMAP4_CM_CLKMODE_DPLL_CORE_OFFSET 0x0020
#define OMAP4430_CM_CLKMODE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0020)
+#define OMAP4_CM_IDLEST_DPLL_CORE_OFFSET 0x0024
#define OMAP4430_CM_IDLEST_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0024)
+#define OMAP4_CM_AUTOIDLE_DPLL_CORE_OFFSET 0x0028
#define OMAP4430_CM_AUTOIDLE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0028)
+#define OMAP4_CM_CLKSEL_DPLL_CORE_OFFSET 0x002c
#define OMAP4430_CM_CLKSEL_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x002c)
+#define OMAP4_CM_DIV_M2_DPLL_CORE_OFFSET 0x0030
#define OMAP4430_CM_DIV_M2_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0030)
+#define OMAP4_CM_DIV_M3_DPLL_CORE_OFFSET 0x0034
#define OMAP4430_CM_DIV_M3_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0034)
+#define OMAP4_CM_DIV_M4_DPLL_CORE_OFFSET 0x0038
#define OMAP4430_CM_DIV_M4_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0038)
+#define OMAP4_CM_DIV_M5_DPLL_CORE_OFFSET 0x003c
#define OMAP4430_CM_DIV_M5_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x003c)
+#define OMAP4_CM_DIV_M6_DPLL_CORE_OFFSET 0x0040
#define OMAP4430_CM_DIV_M6_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0040)
+#define OMAP4_CM_DIV_M7_DPLL_CORE_OFFSET 0x0044
#define OMAP4430_CM_DIV_M7_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0044)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0048
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0048)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x004c
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x004c)
+#define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET 0x0050
#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0050)
+#define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET 0x0060
#define OMAP4430_CM_CLKMODE_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0060)
+#define OMAP4_CM_IDLEST_DPLL_MPU_OFFSET 0x0064
#define OMAP4430_CM_IDLEST_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0064)
+#define OMAP4_CM_AUTOIDLE_DPLL_MPU_OFFSET 0x0068
#define OMAP4430_CM_AUTOIDLE_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0068)
+#define OMAP4_CM_CLKSEL_DPLL_MPU_OFFSET 0x006c
#define OMAP4430_CM_CLKSEL_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x006c)
+#define OMAP4_CM_DIV_M2_DPLL_MPU_OFFSET 0x0070
#define OMAP4430_CM_DIV_M2_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0070)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0088
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0088)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x008c
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x008c)
+#define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET 0x009c
#define OMAP4430_CM_BYPCLK_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x009c)
+#define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET 0x00a0
#define OMAP4430_CM_CLKMODE_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a0)
+#define OMAP4_CM_IDLEST_DPLL_IVA_OFFSET 0x00a4
#define OMAP4430_CM_IDLEST_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a4)
+#define OMAP4_CM_AUTOIDLE_DPLL_IVA_OFFSET 0x00a8
#define OMAP4430_CM_AUTOIDLE_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a8)
+#define OMAP4_CM_CLKSEL_DPLL_IVA_OFFSET 0x00ac
#define OMAP4430_CM_CLKSEL_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ac)
+#define OMAP4_CM_DIV_M4_DPLL_IVA_OFFSET 0x00b8
#define OMAP4430_CM_DIV_M4_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00b8)
+#define OMAP4_CM_DIV_M5_DPLL_IVA_OFFSET 0x00bc
#define OMAP4430_CM_DIV_M5_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00bc)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET 0x00c8
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00c8)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET 0x00cc
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00cc)
+#define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET 0x00dc
#define OMAP4430_CM_BYPCLK_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00dc)
+#define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET 0x00e0
#define OMAP4430_CM_CLKMODE_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e0)
+#define OMAP4_CM_IDLEST_DPLL_ABE_OFFSET 0x00e4
#define OMAP4430_CM_IDLEST_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e4)
+#define OMAP4_CM_AUTOIDLE_DPLL_ABE_OFFSET 0x00e8
#define OMAP4430_CM_AUTOIDLE_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e8)
+#define OMAP4_CM_CLKSEL_DPLL_ABE_OFFSET 0x00ec
#define OMAP4430_CM_CLKSEL_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ec)
+#define OMAP4_CM_DIV_M2_DPLL_ABE_OFFSET 0x00f0
#define OMAP4430_CM_DIV_M2_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f0)
+#define OMAP4_CM_DIV_M3_DPLL_ABE_OFFSET 0x00f4
#define OMAP4430_CM_DIV_M3_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f4)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET 0x0108
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0108)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET 0x010c
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x010c)
+#define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET 0x0120
#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0120)
+#define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET 0x0124
#define OMAP4430_CM_IDLEST_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0124)
+#define OMAP4_CM_AUTOIDLE_DPLL_DDRPHY_OFFSET 0x0128
#define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0128)
+#define OMAP4_CM_CLKSEL_DPLL_DDRPHY_OFFSET 0x012c
#define OMAP4430_CM_CLKSEL_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x012c)
+#define OMAP4_CM_DIV_M2_DPLL_DDRPHY_OFFSET 0x0130
#define OMAP4430_CM_DIV_M2_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0130)
+#define OMAP4_CM_DIV_M4_DPLL_DDRPHY_OFFSET 0x0138
#define OMAP4430_CM_DIV_M4_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0138)
+#define OMAP4_CM_DIV_M5_DPLL_DDRPHY_OFFSET 0x013c
#define OMAP4430_CM_DIV_M5_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x013c)
+#define OMAP4_CM_DIV_M6_DPLL_DDRPHY_OFFSET 0x0140
#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0140)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET 0x0148
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0148)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET 0x014c
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x014c)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET 0x0160
#define OMAP4430_CM_SHADOW_FREQ_CONFIG1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0160)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET 0x0164
#define OMAP4430_CM_SHADOW_FREQ_CONFIG2 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0164)
+#define OMAP4_CM_DYN_DEP_PRESCAL_OFFSET 0x0170
#define OMAP4430_CM_DYN_DEP_PRESCAL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0170)
+#define OMAP4_CM_RESTORE_ST_OFFSET 0x0180
#define OMAP4430_CM_RESTORE_ST OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0180)
/* CM1.MPU_CM1 register offsets */
+#define OMAP4_CM_MPU_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_MPU_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0000)
+#define OMAP4_CM_MPU_STATICDEP_OFFSET 0x0004
#define OMAP4430_CM_MPU_STATICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0004)
+#define OMAP4_CM_MPU_DYNAMICDEP_OFFSET 0x0008
#define OMAP4430_CM_MPU_DYNAMICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0008)
+#define OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_MPU_MPU_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0020)
/* CM1.TESLA_CM1 register offsets */
+#define OMAP4_CM_TESLA_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_TESLA_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0000)
+#define OMAP4_CM_TESLA_STATICDEP_OFFSET 0x0004
#define OMAP4430_CM_TESLA_STATICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0004)
+#define OMAP4_CM_TESLA_DYNAMICDEP_OFFSET 0x0008
#define OMAP4430_CM_TESLA_DYNAMICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0008)
+#define OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_TESLA_TESLA_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0020)
/* CM1.ABE_CM1 register offsets */
+#define OMAP4_CM1_ABE_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM1_ABE_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0000)
+#define OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM1_ABE_L4ABE_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0020)
+#define OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET 0x0028
#define OMAP4430_CM1_ABE_AESS_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0028)
+#define OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET 0x0030
#define OMAP4430_CM1_ABE_PDM_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0030)
+#define OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET 0x0038
#define OMAP4430_CM1_ABE_DMIC_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0038)
+#define OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET 0x0040
#define OMAP4430_CM1_ABE_MCASP_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0040)
+#define OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET 0x0048
#define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0048)
+#define OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET 0x0050
#define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0050)
+#define OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET 0x0058
#define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0058)
+#define OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET 0x0060
#define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0060)
+#define OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET 0x0068
#define OMAP4430_CM1_ABE_TIMER5_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0068)
+#define OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET 0x0070
#define OMAP4430_CM1_ABE_TIMER6_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0070)
+#define OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET 0x0078
#define OMAP4430_CM1_ABE_TIMER7_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0078)
+#define OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET 0x0080
#define OMAP4430_CM1_ABE_TIMER8_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0080)
+#define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET 0x0088
#define OMAP4430_CM1_ABE_WDT3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088)
-/* CM1.RESTORE_CM1 register offsets */
-#define OMAP4430_CM_CLKSEL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000)
-#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004)
-#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008)
-#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c)
-#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010)
-#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014)
-#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018)
-#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c)
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020)
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024)
-#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028)
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c)
-#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030)
-#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034)
-
/* CM2 */
-
/* CM2.OCP_SOCKET_CM2 register offsets */
+#define OMAP4_REVISION_CM2_OFFSET 0x0000
#define OMAP4430_REVISION_CM2 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4_CM_CM2_PROFILING_CLKCTRL_OFFSET 0x0040
#define OMAP4430_CM_CM2_PROFILING_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0040)
/* CM2.CKGEN_CM2 register offsets */
+#define OMAP4_CM_CLKSEL_DUCATI_ISS_ROOT_OFFSET 0x0000
#define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0000)
+#define OMAP4_CM_CLKSEL_USB_60MHZ_OFFSET 0x0004
#define OMAP4430_CM_CLKSEL_USB_60MHZ OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0004)
+#define OMAP4_CM_SCALE_FCLK_OFFSET 0x0008
#define OMAP4430_CM_SCALE_FCLK OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0008)
+#define OMAP4_CM_CORE_DVFS_PERF1_OFFSET 0x0010
#define OMAP4430_CM_CORE_DVFS_PERF1 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0010)
+#define OMAP4_CM_CORE_DVFS_PERF2_OFFSET 0x0014
#define OMAP4430_CM_CORE_DVFS_PERF2 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0014)
+#define OMAP4_CM_CORE_DVFS_PERF3_OFFSET 0x0018
#define OMAP4430_CM_CORE_DVFS_PERF3 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0018)
+#define OMAP4_CM_CORE_DVFS_PERF4_OFFSET 0x001c
#define OMAP4430_CM_CORE_DVFS_PERF4 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x001c)
+#define OMAP4_CM_CORE_DVFS_CURRENT_OFFSET 0x0024
#define OMAP4430_CM_CORE_DVFS_CURRENT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0024)
+#define OMAP4_CM_IVA_DVFS_PERF_TESLA_OFFSET 0x0028
#define OMAP4430_CM_IVA_DVFS_PERF_TESLA OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0028)
+#define OMAP4_CM_IVA_DVFS_PERF_IVAHD_OFFSET 0x002c
#define OMAP4430_CM_IVA_DVFS_PERF_IVAHD OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x002c)
+#define OMAP4_CM_IVA_DVFS_PERF_ABE_OFFSET 0x0030
#define OMAP4430_CM_IVA_DVFS_PERF_ABE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0030)
+#define OMAP4_CM_IVA_DVFS_CURRENT_OFFSET 0x0038
#define OMAP4430_CM_IVA_DVFS_CURRENT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0038)
+#define OMAP4_CM_CLKMODE_DPLL_PER_OFFSET 0x0040
#define OMAP4430_CM_CLKMODE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0040)
+#define OMAP4_CM_IDLEST_DPLL_PER_OFFSET 0x0044
#define OMAP4430_CM_IDLEST_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0044)
+#define OMAP4_CM_AUTOIDLE_DPLL_PER_OFFSET 0x0048
#define OMAP4430_CM_AUTOIDLE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0048)
+#define OMAP4_CM_CLKSEL_DPLL_PER_OFFSET 0x004c
#define OMAP4430_CM_CLKSEL_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x004c)
+#define OMAP4_CM_DIV_M2_DPLL_PER_OFFSET 0x0050
#define OMAP4430_CM_DIV_M2_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0050)
+#define OMAP4_CM_DIV_M3_DPLL_PER_OFFSET 0x0054
#define OMAP4430_CM_DIV_M3_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0054)
+#define OMAP4_CM_DIV_M4_DPLL_PER_OFFSET 0x0058
#define OMAP4430_CM_DIV_M4_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0058)
+#define OMAP4_CM_DIV_M5_DPLL_PER_OFFSET 0x005c
#define OMAP4430_CM_DIV_M5_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x005c)
+#define OMAP4_CM_DIV_M6_DPLL_PER_OFFSET 0x0060
#define OMAP4430_CM_DIV_M6_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0060)
+#define OMAP4_CM_DIV_M7_DPLL_PER_OFFSET 0x0064
#define OMAP4430_CM_DIV_M7_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0064)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0068
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x006c
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c)
+#define OMAP4_CM_EMU_OVERRIDE_DPLL_PER_OFFSET 0x0070
#define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070)
+#define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET 0x0080
#define OMAP4430_CM_CLKMODE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080)
+#define OMAP4_CM_IDLEST_DPLL_USB_OFFSET 0x0084
#define OMAP4430_CM_IDLEST_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0084)
+#define OMAP4_CM_AUTOIDLE_DPLL_USB_OFFSET 0x0088
#define OMAP4430_CM_AUTOIDLE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0088)
+#define OMAP4_CM_CLKSEL_DPLL_USB_OFFSET 0x008c
#define OMAP4430_CM_CLKSEL_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x008c)
+#define OMAP4_CM_DIV_M2_DPLL_USB_OFFSET 0x0090
#define OMAP4430_CM_DIV_M2_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0090)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET 0x00a8
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00a8)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET 0x00ac
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ac)
+#define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET 0x00b4
#define OMAP4430_CM_CLKDCOLDO_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00b4)
+#define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET 0x00c0
#define OMAP4430_CM_CLKMODE_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c0)
+#define OMAP4_CM_IDLEST_DPLL_UNIPRO_OFFSET 0x00c4
#define OMAP4430_CM_IDLEST_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c4)
+#define OMAP4_CM_AUTOIDLE_DPLL_UNIPRO_OFFSET 0x00c8
#define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c8)
+#define OMAP4_CM_CLKSEL_DPLL_UNIPRO_OFFSET 0x00cc
#define OMAP4430_CM_CLKSEL_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00cc)
+#define OMAP4_CM_DIV_M2_DPLL_UNIPRO_OFFSET 0x00d0
#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00d0)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET 0x00e8
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00e8)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET 0x00ec
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ec)
/* CM2.ALWAYS_ON_CM2 register offsets */
+#define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_ALWON_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0000)
+#define OMAP4_CM_ALWON_MDMINTC_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0020)
+#define OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET 0x0028
#define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET 0x0030
#define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET 0x0038
#define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038)
/* CM2.CORE_CM2 register offsets */
+#define OMAP4_CM_L3_1_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_L3_1_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0000)
+#define OMAP4_CM_L3_1_DYNAMICDEP_OFFSET 0x0008
#define OMAP4430_CM_L3_1_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0008)
+#define OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_L3_1_L3_1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0020)
+#define OMAP4_CM_L3_2_CLKSTCTRL_OFFSET 0x0100
#define OMAP4430_CM_L3_2_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0100)
+#define OMAP4_CM_L3_2_DYNAMICDEP_OFFSET 0x0108
#define OMAP4430_CM_L3_2_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0108)
+#define OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET 0x0120
#define OMAP4430_CM_L3_2_L3_2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0120)
+#define OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET 0x0128
#define OMAP4430_CM_L3_2_GPMC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0128)
+#define OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET 0x0130
#define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0130)
+#define OMAP4_CM_DUCATI_CLKSTCTRL_OFFSET 0x0200
#define OMAP4430_CM_DUCATI_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0200)
+#define OMAP4_CM_DUCATI_STATICDEP_OFFSET 0x0204
#define OMAP4430_CM_DUCATI_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0204)
+#define OMAP4_CM_DUCATI_DYNAMICDEP_OFFSET 0x0208
#define OMAP4430_CM_DUCATI_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0208)
+#define OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET 0x0220
#define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0220)
+#define OMAP4_CM_SDMA_CLKSTCTRL_OFFSET 0x0300
#define OMAP4430_CM_SDMA_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0300)
+#define OMAP4_CM_SDMA_STATICDEP_OFFSET 0x0304
#define OMAP4430_CM_SDMA_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0304)
+#define OMAP4_CM_SDMA_DYNAMICDEP_OFFSET 0x0308
#define OMAP4430_CM_SDMA_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0308)
+#define OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET 0x0320
#define OMAP4430_CM_SDMA_SDMA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0320)
+#define OMAP4_CM_MEMIF_CLKSTCTRL_OFFSET 0x0400
#define OMAP4430_CM_MEMIF_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0400)
+#define OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET 0x0420
#define OMAP4430_CM_MEMIF_DMM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0420)
+#define OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET 0x0428
#define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0428)
+#define OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET 0x0430
#define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0430)
+#define OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET 0x0438
#define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0438)
+#define OMAP4_CM_MEMIF_DLL_CLKCTRL_OFFSET 0x0440
#define OMAP4430_CM_MEMIF_DLL_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0440)
+#define OMAP4_CM_MEMIF_EMIF_H1_CLKCTRL_OFFSET 0x0450
#define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0450)
+#define OMAP4_CM_MEMIF_EMIF_H2_CLKCTRL_OFFSET 0x0458
#define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0458)
+#define OMAP4_CM_MEMIF_DLL_H_CLKCTRL_OFFSET 0x0460
#define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0460)
+#define OMAP4_CM_D2D_CLKSTCTRL_OFFSET 0x0500
#define OMAP4430_CM_D2D_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0500)
+#define OMAP4_CM_D2D_STATICDEP_OFFSET 0x0504
#define OMAP4430_CM_D2D_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0504)
+#define OMAP4_CM_D2D_DYNAMICDEP_OFFSET 0x0508
#define OMAP4430_CM_D2D_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0508)
+#define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET 0x0520
#define OMAP4430_CM_D2D_SAD2D_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0520)
+#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET 0x0528
#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0528)
+#define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET 0x0530
#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0530)
+#define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET 0x0600
#define OMAP4430_CM_L4CFG_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0600)
+#define OMAP4_CM_L4CFG_DYNAMICDEP_OFFSET 0x0608
#define OMAP4430_CM_L4CFG_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0608)
+#define OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET 0x0620
#define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0620)
+#define OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET 0x0628
#define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0628)
+#define OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET 0x0630
#define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0630)
+#define OMAP4_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET 0x0638
#define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0638)
+#define OMAP4_CM_L3INSTR_CLKSTCTRL_OFFSET 0x0700
#define OMAP4430_CM_L3INSTR_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0700)
+#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET 0x0720
#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0720)
+#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET 0x0728
#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0728)
+#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET 0x0740
#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0740)
/* CM2.IVAHD_CM2 register offsets */
+#define OMAP4_CM_IVAHD_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_IVAHD_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0000)
+#define OMAP4_CM_IVAHD_STATICDEP_OFFSET 0x0004
#define OMAP4430_CM_IVAHD_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0004)
+#define OMAP4_CM_IVAHD_DYNAMICDEP_OFFSET 0x0008
#define OMAP4430_CM_IVAHD_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0008)
+#define OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0020)
+#define OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET 0x0028
#define OMAP4430_CM_IVAHD_SL2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0028)
/* CM2.CAM_CM2 register offsets */
+#define OMAP4_CM_CAM_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_CAM_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0000)
+#define OMAP4_CM_CAM_STATICDEP_OFFSET 0x0004
#define OMAP4430_CM_CAM_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0004)
+#define OMAP4_CM_CAM_DYNAMICDEP_OFFSET 0x0008
#define OMAP4430_CM_CAM_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0008)
+#define OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_CAM_ISS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0020)
+#define OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET 0x0028
#define OMAP4430_CM_CAM_FDIF_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0028)
/* CM2.DSS_CM2 register offsets */
+#define OMAP4_CM_DSS_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_DSS_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0000)
+#define OMAP4_CM_DSS_STATICDEP_OFFSET 0x0004
#define OMAP4430_CM_DSS_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0004)
+#define OMAP4_CM_DSS_DYNAMICDEP_OFFSET 0x0008
#define OMAP4430_CM_DSS_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0008)
+#define OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_DSS_DSS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0020)
+#define OMAP4_CM_DSS_DEISS_CLKCTRL_OFFSET 0x0028
#define OMAP4430_CM_DSS_DEISS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0028)
/* CM2.GFX_CM2 register offsets */
+#define OMAP4_CM_GFX_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_GFX_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0000)
+#define OMAP4_CM_GFX_STATICDEP_OFFSET 0x0004
#define OMAP4430_CM_GFX_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0004)
+#define OMAP4_CM_GFX_DYNAMICDEP_OFFSET 0x0008
#define OMAP4430_CM_GFX_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0008)
+#define OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_GFX_GFX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0020)
/* CM2.L3INIT_CM2 register offsets */
+#define OMAP4_CM_L3INIT_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_L3INIT_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0000)
+#define OMAP4_CM_L3INIT_STATICDEP_OFFSET 0x0004
#define OMAP4430_CM_L3INIT_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0004)
+#define OMAP4_CM_L3INIT_DYNAMICDEP_OFFSET 0x0008
#define OMAP4430_CM_L3INIT_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0008)
+#define OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET 0x0028
#define OMAP4430_CM_L3INIT_MMC1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0028)
+#define OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET 0x0030
#define OMAP4430_CM_L3INIT_MMC2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0030)
+#define OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET 0x0038
#define OMAP4430_CM_L3INIT_HSI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0038)
+#define OMAP4_CM_L3INIT_UNIPRO1_CLKCTRL_OFFSET 0x0040
#define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0040)
+#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET 0x0058
#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0058)
+#define OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET 0x0060
#define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0060)
+#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET 0x0068
#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0068)
+#define OMAP4_CM_L3INIT_P1500_CLKCTRL_OFFSET 0x0078
#define OMAP4430_CM_L3INIT_P1500_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0078)
+#define OMAP4_CM_L3INIT_EMAC_CLKCTRL_OFFSET 0x0080
#define OMAP4430_CM_L3INIT_EMAC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0080)
+#define OMAP4_CM_L3INIT_SATA_CLKCTRL_OFFSET 0x0088
#define OMAP4430_CM_L3INIT_SATA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0088)
+#define OMAP4_CM_L3INIT_TPPSS_CLKCTRL_OFFSET 0x0090
#define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0090)
+#define OMAP4_CM_L3INIT_PCIESS_CLKCTRL_OFFSET 0x0098
#define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0098)
+#define OMAP4_CM_L3INIT_CCPTX_CLKCTRL_OFFSET 0x00a8
#define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00a8)
+#define OMAP4_CM_L3INIT_XHPI_CLKCTRL_OFFSET 0x00c0
#define OMAP4430_CM_L3INIT_XHPI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c0)
+#define OMAP4_CM_L3INIT_MMC6_CLKCTRL_OFFSET 0x00c8
#define OMAP4430_CM_L3INIT_MMC6_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c8)
+#define OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET 0x00d0
#define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00d0)
+#define OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET 0x00e0
#define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00e0)
/* CM2.L4PER_CM2 register offsets */
+#define OMAP4_CM_L4PER_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_L4PER_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0000)
+#define OMAP4_CM_L4PER_DYNAMICDEP_OFFSET 0x0008
#define OMAP4430_CM_L4PER_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0008)
+#define OMAP4_CM_L4PER_ADC_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_L4PER_ADC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0020)
+#define OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET 0x0028
#define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0028)
+#define OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET 0x0030
#define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0030)
+#define OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET 0x0038
#define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0038)
+#define OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET 0x0040
#define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0040)
+#define OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET 0x0048
#define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0048)
+#define OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET 0x0050
#define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0050)
+#define OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET 0x0058
#define OMAP4430_CM_L4PER_ELM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0058)
+#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET 0x0060
#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0060)
+#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET 0x0068
#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0068)
+#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET 0x0070
#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0070)
+#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET 0x0078
#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0078)
+#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET 0x0080
#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0080)
+#define OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET 0x0088
#define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0088)
+#define OMAP4_CM_L4PER_HECC1_CLKCTRL_OFFSET 0x0090
#define OMAP4430_CM_L4PER_HECC1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0090)
+#define OMAP4_CM_L4PER_HECC2_CLKCTRL_OFFSET 0x0098
#define OMAP4430_CM_L4PER_HECC2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0098)
+#define OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET 0x00a0
#define OMAP4430_CM_L4PER_I2C1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a0)
+#define OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET 0x00a8
#define OMAP4430_CM_L4PER_I2C2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a8)
+#define OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET 0x00b0
#define OMAP4430_CM_L4PER_I2C3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b0)
+#define OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET 0x00b8
#define OMAP4430_CM_L4PER_I2C4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b8)
+#define OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET 0x00c0
#define OMAP4430_CM_L4PER_L4PER_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00c0)
+#define OMAP4_CM_L4PER_MCASP2_CLKCTRL_OFFSET 0x00d0
#define OMAP4430_CM_L4PER_MCASP2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d0)
+#define OMAP4_CM_L4PER_MCASP3_CLKCTRL_OFFSET 0x00d8
#define OMAP4430_CM_L4PER_MCASP3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d8)
+#define OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET 0x00e0
#define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e0)
+#define OMAP4_CM_L4PER_MGATE_CLKCTRL_OFFSET 0x00e8
#define OMAP4430_CM_L4PER_MGATE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e8)
+#define OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET 0x00f0
#define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f0)
+#define OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET 0x00f8
#define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f8)
+#define OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET 0x0100
#define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0100)
+#define OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET 0x0108
#define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0108)
+#define OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET 0x0120
#define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0120)
+#define OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET 0x0128
#define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0128)
+#define OMAP4_CM_L4PER_MSPROHG_CLKCTRL_OFFSET 0x0130
#define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0130)
+#define OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET 0x0138
#define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0138)
+#define OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET 0x0140
#define OMAP4430_CM_L4PER_UART1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0140)
+#define OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET 0x0148
#define OMAP4430_CM_L4PER_UART2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0148)
+#define OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET 0x0150
#define OMAP4430_CM_L4PER_UART3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0150)
+#define OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET 0x0158
#define OMAP4430_CM_L4PER_UART4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0158)
+#define OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET 0x0160
#define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0160)
+#define OMAP4_CM_L4PER_I2C5_CLKCTRL_OFFSET 0x0168
#define OMAP4430_CM_L4PER_I2C5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0168)
+#define OMAP4_CM_L4SEC_CLKSTCTRL_OFFSET 0x0180
#define OMAP4430_CM_L4SEC_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0180)
+#define OMAP4_CM_L4SEC_STATICDEP_OFFSET 0x0184
#define OMAP4430_CM_L4SEC_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0184)
+#define OMAP4_CM_L4SEC_DYNAMICDEP_OFFSET 0x0188
#define OMAP4430_CM_L4SEC_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0188)
+#define OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET 0x01a0
#define OMAP4430_CM_L4SEC_AES1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a0)
+#define OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET 0x01a8
#define OMAP4430_CM_L4SEC_AES2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a8)
+#define OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET 0x01b0
#define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b0)
+#define OMAP4_CM_L4SEC_PKAEIP29_CLKCTRL_OFFSET 0x01b8
#define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b8)
+#define OMAP4_CM_L4SEC_RNG_CLKCTRL_OFFSET 0x01c0
#define OMAP4430_CM_L4SEC_RNG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c0)
+#define OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET 0x01c8
#define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c8)
+#define OMAP4_CM_L4SEC_CRYPTODMA_CLKCTRL_OFFSET 0x01d8
#define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01d8)
/* CM2.CEFUSE_CM2 register offsets */
+#define OMAP4_CM_CEFUSE_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_CEFUSE_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000)
+#define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020)
-
-/* CM2.RESTORE_CM2 register offsets */
-#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000)
-#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004)
-#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008)
-#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c)
-#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010)
-#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014)
-#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018)
-#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c)
-#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020)
-#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024)
-#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028)
-#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c)
-#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030)
-#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034)
-#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038)
-#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c)
-#define OMAP4430_CM_SDMA_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040)
#endif
#include <asm/atomic.h>
-#include "cm.h"
-
-/* XXX move this to cm.h */
-/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
-#define MAX_MODULE_READY_TIME 20000
+#include <plat/common.h>
-/*
- * OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK: isolates the IDLEST field in the
- * CM_CLKCTRL register.
- */
-#define OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK (0x2 << 16)
-
-/*
- * OMAP4 prcm_mod u32 fields contain packed data: the CM ID in bit 16 and
- * the PRCM module offset address (from the CM module base) in bits 15-0.
- */
-#define OMAP4_PRCM_MOD_CM_ID_SHIFT 16
-#define OMAP4_PRCM_MOD_OFFS_MASK 0xffff
+#include "cm.h"
+#include "cm-regbits-44xx.h"
/**
- * omap4_cm_wait_idlest_ready - wait for a module to leave idle or standby
- * @prcm_mod: PRCM module offset (XXX example)
- * @prcm_dev_offs: PRCM device offset (e.g. MCASP XXX example)
+ * omap4_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @clkctrl_reg: CLKCTRL module address
+ *
+ * Wait for the module IDLEST to be functional. If the idle state is in any
+ * the non functional state (trans, idle or disabled), module and thus the
+ * sysconfig cannot be accessed and will probably lead to an "imprecise
+ * external abort"
+ *
+ * Module idle state:
+ * 0x0 func: Module is fully functional, including OCP
+ * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep
+ * abortion
+ * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if
+ * using separate functional clock
+ * 0x3 disabled: Module is disabled and cannot be accessed
*
- * XXX document
+ * TODO: Need to handle module accessible in idle state
*/
-int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
+int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg)
{
- /* FIXME: Add clock manager related code */
- return 0;
+ int i = 0;
+
+ if (!clkctrl_reg)
+ return 0;
+
+ omap_test_timeout(((__raw_readl(clkctrl_reg) &
+ OMAP4430_IDLEST_MASK) == 0),
+ MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
u32 offset = 0;
v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
- OMAP3430_GLOBAL_COLD_RST) {
+ OMAP3430_GLOBAL_COLD_RST_MASK) {
for ( ; offset <= max_offset; offset += 0x4)
__raw_writel(0x0, (v_addr + offset));
- prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD,
- OMAP3_PRM_RSTST_OFFSET);
+ prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_RSTST_OFFSET);
}
}
static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
int controller_nr)
{
+ if ((mmc_controller->slots[0].switch_pin > 0) && \
+ (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
+ OMAP_PIN_INPUT_PULLUP);
+ if ((mmc_controller->slots[0].gpio_wp > 0) && \
+ (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
+ OMAP_PIN_INPUT_PULLUP);
+
if (cpu_is_omap2420() && controller_nr == 0) {
omap_cfg_reg(H18_24XX_MMC_CMD);
omap_cfg_reg(H15_24XX_MMC_CLKI);
static inline void omap_hdq_init(void) {}
#endif
+/*---------------------------------------------------------------------------*/
+
+#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
+ defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
+};
+#else
+static struct resource omap_vout_resource[2] = {
+};
+#endif
+
+static struct platform_device omap_vout_device = {
+ .name = "omap_vout",
+ .num_resources = ARRAY_SIZE(omap_vout_resource),
+ .resource = &omap_vout_resource[0],
+ .id = -1,
+};
+static void omap_init_vout(void)
+{
+ if (platform_device_register(&omap_vout_device) < 0)
+ printk(KERN_ERR "Unable to register OMAP-VOUT device\n");
+}
+#else
+static inline void omap_init_vout(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
omap_hdq_init();
omap_init_sti();
omap_init_sha1_md5();
+ omap_init_vout();
return 0;
}
static u16 control_pbias_offset;
static u16 control_devconf1_offset;
+static u16 control_mmc1;
#define HSMMC_NAME_LEN 9
#define hsmmc_get_context_loss NULL
#endif
-static void hsmmc1_before_set_reg(struct device *dev, int slot,
+static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
u32 reg, prog_io;
}
}
-static void hsmmc1_after_set_reg(struct device *dev, int slot,
+static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
u32 reg;
}
}
+static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
+ int power_on, int vdd)
+{
+ u32 reg;
+
+ /*
+ * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+ * card with Vcc regulator (from twl4030 or whatever). OMAP has both
+ * 1.8V and 3.0V modes, controlled by the PBIAS register.
+ *
+ * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+ * is most naturally TWL VSIM; those pins also use PBIAS.
+ *
+ * FIXME handle VMMC1A as needed ...
+ */
+ reg = omap_ctrl_readl(control_pbias_offset);
+ reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ |
+ OMAP4_USBC1_ICUSB_PWRDNZ);
+ omap_ctrl_writel(reg, control_pbias_offset);
+}
+
+static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
+ int power_on, int vdd)
+{
+ u32 reg;
+
+ if (power_on) {
+ reg = omap_ctrl_readl(control_pbias_offset);
+ reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ;
+ if ((1 << vdd) <= MMC_VDD_165_195)
+ reg &= ~OMAP4_MMC1_PBIASLITE_VMODE;
+ else
+ reg |= OMAP4_MMC1_PBIASLITE_VMODE;
+ reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ |
+ OMAP4_USBC1_ICUSB_PWRDNZ);
+ omap_ctrl_writel(reg, control_pbias_offset);
+ /* 4 microsec delay for comparator to generate an error*/
+ udelay(4);
+ reg = omap_ctrl_readl(control_pbias_offset);
+ if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR) {
+ pr_err("Pbias Voltage is not same as LDO\n");
+ /* Caution : On VMODE_ERROR Power Down MMC IO */
+ reg &= ~(OMAP4_MMC1_PWRDNZ | OMAP4_USBC1_ICUSB_PWRDNZ);
+ omap_ctrl_writel(reg, control_pbias_offset);
+ }
+ } else {
+ reg = omap_ctrl_readl(control_pbias_offset);
+ reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ |
+ OMAP4_MMC1_PBIASLITE_VMODE | OMAP4_MMC1_PWRDNZ |
+ OMAP4_USBC1_ICUSB_PWRDNZ);
+ omap_ctrl_writel(reg, control_pbias_offset);
+ }
+}
+
static void hsmmc23_before_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
}
}
+static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+ return 0;
+}
+
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
struct omap2_hsmmc_info *c;
int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
int i;
+ u32 reg;
- if (cpu_is_omap2430()) {
- control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
- control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+ if (!cpu_is_omap44xx()) {
+ if (cpu_is_omap2430()) {
+ control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
+ control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+ } else {
+ control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+ control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+ }
} else {
- control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
- control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+ control_pbias_offset = OMAP44XX_CONTROL_PBIAS_LITE;
+ control_mmc1 = OMAP44XX_CONTROL_MMC1;
+ reg = omap_ctrl_readl(control_mmc1);
+ reg |= (OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 |
+ OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1);
+ reg &= ~(OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 |
+ OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3);
+ reg |= (OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL |
+ OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL |
+ OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL);
+ omap_ctrl_writel(reg, control_mmc1);
}
for (c = controllers; c->mmc; c++) {
*/
mmc->slots[0].ocr_mask = c->ocr_mask;
+ if (cpu_is_omap3517() || cpu_is_omap3505())
+ mmc->slots[0].set_power = nop_mmc_set_power;
+ else
+ mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+
switch (c->mmc) {
case 1:
- /* on-chip level shifting via PBIAS0/PBIAS1 */
- mmc->slots[0].before_set_reg = hsmmc1_before_set_reg;
- mmc->slots[0].after_set_reg = hsmmc1_after_set_reg;
+ if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ /* on-chip level shifting via PBIAS0/PBIAS1 */
+ if (cpu_is_omap44xx()) {
+ mmc->slots[0].before_set_reg =
+ omap4_hsmmc1_before_set_reg;
+ mmc->slots[0].after_set_reg =
+ omap4_hsmmc1_after_set_reg;
+ } else {
+ mmc->slots[0].before_set_reg =
+ omap_hsmmc1_before_set_reg;
+ mmc->slots[0].after_set_reg =
+ omap_hsmmc1_after_set_reg;
+ }
+ }
/* Omap3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() && c->wires > 4) {
c->wires = 4;
/* FALLTHROUGH */
case 3:
- /* off-chip level shifting, or none */
- mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
- mmc->slots[0].after_set_reg = NULL;
+ if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ /* off-chip level shifting, or none */
+ mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+ mmc->slots[0].after_set_reg = NULL;
+ }
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
#define AM35XX_IPSS_HECC_BASE 0x5C050000
#define AM35XX_IPSS_VPFE_BASE 0x5C060000
-#endif /* __ASM_ARCH_AM35XX_H */
+
+/* HECC module specifc offset definitions */
+#define AM35XX_HECC_SCC_HECC_OFFSET (0x0)
+#define AM35XX_HECC_SCC_RAM_OFFSET (0x3000)
+#define AM35XX_HECC_RAM_OFFSET (0x3000)
+#define AM35XX_HECC_MBOX_OFFSET (0x2000)
+#define AM35XX_HECC_INT_LINE (0x0)
+#define AM35XX_HECC_VERSION (0x1)
+
+#define AM35XX_EMAC_CNTRL_OFFSET (0x10000)
+#define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0)
+#define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000)
+#define AM35XX_EMAC_MDIO_OFFSET (0x30000)
+#define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000)
+#define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \
+ AM3517_EMAC_CNTRL_RAM_OFFSET)
+#define AM35XX_EMAC_HW_RAM_ADDR (0x01E20000)
+
+#endif /* __ASM_ARCH_AM35XX_H */
#include <linux/serial_reg.h>
+#include <asm/memory.h>
+
#include <plat/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
cmp \rx, #0 @ is port configured?
bne 99f @ already configured
- /* Check UART1 scratchpad register for uart to use */
+ /* Check the debug UART configuration set in uncompress.h */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x48000000 @ physical base address
- movne \rx, #0xfa000000 @ virtual base
- orr \rx, \rx, #0x0006a000 @ uart1 on omap2/3/4
- ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad
+ ldreq \rx, =OMAP_UART_INFO
+ ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
+ ldr \rx, [\rx, #0]
/* Select the UART to use based on the UART1 scratchpad value */
cmp \rx, #0 @ no port configured?
b 98f
44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE)
b 98f
-95: mov \rx, #ZOOM_UART_BASE
+95: ldr \rx, =ZOOM_UART_BASE
ldr \tmp, =omap_uart_phys
str \rx, [\tmp, #0]
- mov \rx, #ZOOM_UART_VIRT
+ ldr \rx, =ZOOM_UART_VIRT
ldr \tmp, =omap_uart_virt
str \rx, [\tmp, #0]
mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT)
--- /dev/null
+/*
+ * omap4-common.h: OMAP4 specific common header file
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_OMAP4_COMMON_H
+#define OMAP_ARCH_OMAP4_COMMON_H
+
+#ifdef CONFIG_CACHE_L2X0
+extern void __iomem *l2cache_base;
+#endif
+
+extern void __iomem *gic_cpu_base_addr;
+extern void __iomem *gic_dist_base_addr;
+
+extern void __init gic_init_irq(void);
+extern void omap_smc1(u32 fn, u32 arg);
+
+#endif
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
+#if defined(CONFIG_DEBUG_LL) && \
+ (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
+ {
+ .virtual = ZOOM_UART_VIRT,
+ .pfn = __phys_to_pfn(ZOOM_UART_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ },
+#endif
};
#endif
#ifdef CONFIG_ARCH_OMAP4
printk("\n");
iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+ omap2_iommu_disable(obj);
return stat;
}
if (!cr)
return ERR_PTR(-ENOMEM);
- cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+ cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid;
cr->ram = e->pa | e->endian | e->elsz | e->mixed;
return cr;
char *p = buf;
/* FIXME: Need more detail analysis of cam/ram */
- p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+ p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram,
+ (cr->cam & MMU_CAM_P) ? 1 : 0);
return p - buf;
}
_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
- _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"),
- _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"),
_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
- _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"),
- _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"),
- _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"),
- _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"),
- _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"),
- _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"),
- _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
- _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"),
_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
- _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"),
_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
- _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"),
- _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"),
_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
- _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"),
_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
- _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL),
- _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL),
_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
- _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL),
- _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL),
- _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL),
- _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL),
- _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL),
_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
- _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"),
- _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"),
- _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"),
- _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"),
- _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"),
- _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"),
- _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"),
- _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"),
- _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"),
- _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"),
- _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"),
- _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"),
- _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"),
- _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"),
- _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"),
- _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"),
- _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"),
_OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"),
_OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"),
- _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"),
- _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"),
- _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"),
- _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"),
- _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"),
- _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"),
- _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"),
- _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"),
- _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"),
- _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"),
- _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"),
- _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"),
- _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"),
- _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"),
- _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"),
- _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"),
- _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"),
- _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"),
- _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"),
- _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"),
- _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"),
- _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"),
- _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"),
- _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"),
- _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"),
- _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"),
- _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"),
- _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"),
- _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"),
- _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"),
- _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"),
- _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"),
- _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"),
- _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"),
- _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"),
- _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"),
- _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"),
- _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"),
- _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"),
- _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"),
- _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"),
- _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"),
- _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"),
- _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"),
- _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"),
- _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"),
- _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"),
_OMAP3_BALLENTRY(SIM_CLK, "p26", NULL),
_OMAP3_BALLENTRY(SIM_IO, "p27", NULL),
_OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL),
_OMAP3_BALLENTRY(SIM_RST, "r25", NULL),
- _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL),
_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
--- /dev/null
+/*
+ * omap iommu: omap device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <plat/iommu.h>
+#include <plat/irqs.h>
+
+struct iommu_device {
+ resource_size_t base;
+ int irq;
+ struct iommu_platform_data pdata;
+ struct resource res[2];
+};
+static struct iommu_device *devices;
+static int num_iommu_devices;
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct iommu_device omap3_devices[] = {
+ {
+ .base = 0x480bd400,
+ .irq = 24,
+ .pdata = {
+ .name = "isp",
+ .nr_tlb_entries = 8,
+ .clk_name = "cam_ick",
+ },
+ },
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+ {
+ .base = 0x5d000000,
+ .irq = 28,
+ .pdata = {
+ .name = "iva2",
+ .nr_tlb_entries = 32,
+ .clk_name = "iva2_ck",
+ },
+ },
+#endif
+};
+#define NR_OMAP3_IOMMU_DEVICES ARRAY_SIZE(omap3_devices)
+static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
+#else
+#define omap3_devices NULL
+#define NR_OMAP3_IOMMU_DEVICES 0
+#define omap3_iommu_pdev NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static struct iommu_device omap4_devices[] = {
+ {
+ .base = OMAP4_MMU1_BASE,
+ .irq = INT_44XX_DUCATI_MMU_IRQ,
+ .pdata = {
+ .name = "ducati",
+ .nr_tlb_entries = 32,
+ .clk_name = "ducati_ick",
+ },
+ },
+#if defined(CONFIG_MPU_TESLA_IOMMU)
+ {
+ .base = OMAP4_MMU2_BASE,
+ .irq = INT_44XX_DSP_MMU,
+ .pdata = {
+ .name = "tesla",
+ .nr_tlb_entries = 32,
+ .clk_name = "tesla_ick",
+ },
+ },
+#endif
+};
+#define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices)
+static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES];
+#else
+#define omap4_devices NULL
+#define NR_OMAP4_IOMMU_DEVICES 0
+#define omap4_iommu_pdev NULL
+#endif
+
+static struct platform_device **omap_iommu_pdev;
+
+static int __init omap_iommu_init(void)
+{
+ int i, err;
+ struct resource res[] = {
+ { .flags = IORESOURCE_MEM },
+ { .flags = IORESOURCE_IRQ },
+ };
+
+ if (cpu_is_omap34xx()) {
+ devices = omap3_devices;
+ omap_iommu_pdev = omap3_iommu_pdev;
+ num_iommu_devices = NR_OMAP3_IOMMU_DEVICES;
+ } else if (cpu_is_omap44xx()) {
+ devices = omap4_devices;
+ omap_iommu_pdev = omap4_iommu_pdev;
+ num_iommu_devices = NR_OMAP4_IOMMU_DEVICES;
+ } else
+ return -ENODEV;
+
+ for (i = 0; i < num_iommu_devices; i++) {
+ struct platform_device *pdev;
+ const struct iommu_device *d = &devices[i];
+
+ pdev = platform_device_alloc("omap-iommu", i);
+ if (!pdev) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ res[0].start = d->base;
+ res[0].end = d->base + MMU_REG_SIZE - 1;
+ res[1].start = res[1].end = d->irq;
+
+ err = platform_device_add_resources(pdev, res,
+ ARRAY_SIZE(res));
+ if (err)
+ goto err_out;
+ err = platform_device_add_data(pdev, &d->pdata,
+ sizeof(d->pdata));
+ if (err)
+ goto err_out;
+ err = platform_device_add(pdev);
+ if (err)
+ goto err_out;
+ omap_iommu_pdev[i] = pdev;
+ }
+ return 0;
+
+err_out:
+ while (i--)
+ platform_device_put(omap_iommu_pdev[i]);
+ return err;
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+ int i;
+
+ for (i = 0; i < num_iommu_devices; i++)
+ platform_device_unregister(omap_iommu_pdev[i]);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap device registration");
+MODULE_LICENSE("GPL v2");
#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
-#include <plat/common.h>
+#include <mach/omap4-common.h>
/* SCU base address */
static void __iomem *scu_base;
+++ /dev/null
-/*
- * omap iommu: omap3 device registration
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-
-#include <plat/iommu.h>
-
-struct iommu_device {
- resource_size_t base;
- int irq;
- struct iommu_platform_data pdata;
- struct resource res[2];
-};
-
-static struct iommu_device devices[] = {
- {
- .base = 0x480bd400,
- .irq = 24,
- .pdata = {
- .name = "isp",
- .nr_tlb_entries = 8,
- .clk_name = "cam_ick",
- },
- },
-#if defined(CONFIG_MPU_BRIDGE_IOMMU)
- {
- .base = 0x5d000000,
- .irq = 28,
- .pdata = {
- .name = "iva2",
- .nr_tlb_entries = 32,
- .clk_name = "iva2_ck",
- },
- },
-#endif
-};
-#define NR_IOMMU_DEVICES ARRAY_SIZE(devices)
-
-static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
-
-static int __init omap3_iommu_init(void)
-{
- int i, err;
- struct resource res[] = {
- { .flags = IORESOURCE_MEM },
- { .flags = IORESOURCE_IRQ },
- };
-
- for (i = 0; i < NR_IOMMU_DEVICES; i++) {
- struct platform_device *pdev;
- const struct iommu_device *d = &devices[i];
-
- pdev = platform_device_alloc("omap-iommu", i);
- if (!pdev) {
- err = -ENOMEM;
- goto err_out;
- }
-
- res[0].start = d->base;
- res[0].end = d->base + MMU_REG_SIZE - 1;
- res[1].start = res[1].end = d->irq;
-
- err = platform_device_add_resources(pdev, res,
- ARRAY_SIZE(res));
- if (err)
- goto err_out;
- err = platform_device_add_data(pdev, &d->pdata,
- sizeof(d->pdata));
- if (err)
- goto err_out;
- err = platform_device_add(pdev);
- if (err)
- goto err_out;
- omap3_iommu_pdev[i] = pdev;
- }
- return 0;
-
-err_out:
- while (i--)
- platform_device_put(omap3_iommu_pdev[i]);
- return err;
-}
-module_init(omap3_iommu_init);
-
-static void __exit omap3_iommu_exit(void)
-{
- int i;
-
- for (i = 0; i < NR_IOMMU_DEVICES; i++)
- platform_device_unregister(omap3_iommu_pdev[i]);
-}
-module_exit(omap3_iommu_exit);
-
-MODULE_AUTHOR("Hiroshi DOYU");
-MODULE_DESCRIPTION("omap iommu: omap3 device registration");
-MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * OMAP4 specific common source file.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/hardware.h>
+#include <mach/omap4-common.h>
+
+#ifdef CONFIG_CACHE_L2X0
+void __iomem *l2cache_base;
+#endif
+
+void __iomem *gic_cpu_base_addr;
+void __iomem *gic_dist_base_addr;
+
+
+void __init gic_init_irq(void)
+{
+ /* Static mapping, never released */
+ gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
+ BUG_ON(!gic_dist_base_addr);
+ gic_dist_init(0, gic_dist_base_addr, 29);
+
+ /* Static mapping, never released */
+ gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+ BUG_ON(!gic_cpu_base_addr);
+ gic_cpu_init(0, gic_cpu_base_addr);
+}
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init omap_l2_cache_init(void)
+{
+ /*
+ * To avoid code running on other OMAPs in
+ * multi-omap builds
+ */
+ if (!cpu_is_omap44xx())
+ return -ENODEV;
+
+ /* Static mapping, never released */
+ l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
+ BUG_ON(!l2cache_base);
+
+ /* Enable PL310 L2 Cache controller */
+ omap_smc1(0x102, 0x1);
+
+ /*
+ * 32KB way size, 16-way associativity,
+ * parity disabled
+ */
+ l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
+
+ return 0;
+}
+early_initcall(omap_l2_cache_init);
+#endif
* omap_hwmod implementation for OMAP2/3/4
*
* Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- * With fixes and testing from Kevin Hilman
*
- * Created in collaboration with (alphabetical order): Benoit Cousson,
- * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
- * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ * Paul Walmsley, Benoît Cousson, Kevin Hilman
+ *
+ * Created in collaboration with (alphabetical order): Thara Gopinath,
+ * Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari Poussa, Anand
+ * Sawant, Santosh Shilimkar, Richard Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#define MAX_MODULE_RESET_WAIT 10000
/* Name of the OMAP hwmod for the MPU */
-#define MPU_INITIATOR_NAME "mpu_hwmod"
+#define MPU_INITIATOR_NAME "mpu"
/* omap_hwmod_list contains all registered struct omap_hwmods */
static LIST_HEAD(omap_hwmod_list);
*/
static int _init_main_clk(struct omap_hwmod *oh)
{
- struct clk *c;
int ret = 0;
if (!oh->main_clk)
return 0;
- c = omap_clk_get_by_name(oh->main_clk);
- WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s\n",
- oh->name, oh->main_clk);
- if (IS_ERR(c))
- ret = -EINVAL;
- oh->_clk = c;
+ oh->_clk = omap_clk_get_by_name(oh->main_clk);
+ if (!oh->_clk)
+ pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
+ oh->name, oh->main_clk);
+ return -EINVAL;
- WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n",
- oh->main_clk, c->name);
+ if (!oh->_clk->clkdm)
+ pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
+ oh->main_clk, oh->_clk->name);
return ret;
}
*/
static int _init_interface_clks(struct omap_hwmod *oh)
{
- struct omap_hwmod_ocp_if *os;
struct clk *c;
int i;
int ret = 0;
if (oh->slaves_cnt == 0)
return 0;
- for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+ for (i = 0; i < oh->slaves_cnt; i++) {
+ struct omap_hwmod_ocp_if *os = oh->slaves[i];
+
if (!os->clk)
continue;
c = omap_clk_get_by_name(os->clk);
- WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get "
- "interface_clk %s\n", oh->name, os->clk);
- if (IS_ERR(c))
+ if (!c)
+ pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
+ oh->name, os->clk);
ret = -EINVAL;
os->_clk = c;
}
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
c = omap_clk_get_by_name(oc->clk);
- WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get opt_clk "
- "%s\n", oh->name, oc->clk);
- if (IS_ERR(c))
+ if (!c)
+ pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
+ oh->name, oc->clk);
ret = -EINVAL;
oc->_clk = c;
}
*/
static int _enable_clocks(struct omap_hwmod *oh)
{
- struct omap_hwmod_ocp_if *os;
int i;
pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
- if (oh->_clk && !IS_ERR(oh->_clk))
+ if (oh->_clk)
clk_enable(oh->_clk);
if (oh->slaves_cnt > 0) {
- for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+ for (i = 0; i < oh->slaves_cnt; i++) {
+ struct omap_hwmod_ocp_if *os = oh->slaves[i];
struct clk *c = os->_clk;
- if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+ if (c && (os->flags & OCPIF_SWSUP_IDLE))
clk_enable(c);
}
}
*/
static int _disable_clocks(struct omap_hwmod *oh)
{
- struct omap_hwmod_ocp_if *os;
int i;
pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
- if (oh->_clk && !IS_ERR(oh->_clk))
+ if (oh->_clk)
clk_disable(oh->_clk);
if (oh->slaves_cnt > 0) {
- for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+ for (i = 0; i < oh->slaves_cnt; i++) {
+ struct omap_hwmod_ocp_if *os = oh->slaves[i];
struct clk *c = os->_clk;
- if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+ if (c && (os->flags & OCPIF_SWSUP_IDLE))
clk_disable(c);
}
}
*/
static int _find_mpu_port_index(struct omap_hwmod *oh)
{
- struct omap_hwmod_ocp_if *os;
int i;
int found = 0;
if (!oh || oh->slaves_cnt == 0)
return -EINVAL;
- for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+ for (i = 0; i < oh->slaves_cnt; i++) {
+ struct omap_hwmod_ocp_if *os = oh->slaves[i];
+
if (os->user & OCP_USER_MPU) {
found = 1;
break;
if (!oh || oh->slaves_cnt == 0)
return NULL;
- os = *oh->slaves + index;
+ os = oh->slaves[index];
for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) {
if (mem->flags & ADDR_TYPE_RT) {
ret |= _init_interface_clks(oh);
ret |= _init_opt_clks(oh);
- oh->_state = _HWMOD_STATE_CLKS_INITED;
+ if (!ret)
+ oh->_state = _HWMOD_STATE_CLKS_INITED;
- return ret;
+ return 0;
}
/**
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
return 0;
- os = *oh->slaves + oh->_mpu_port_index;
+ os = oh->slaves[oh->_mpu_port_index];
- if (!(os->flags & OCPIF_HAS_IDLEST))
+ if (oh->flags & HWMOD_NO_IDLEST)
return 0;
/* XXX check module SIDLEMODE */
ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
oh->prcm.omap2.idlest_reg_id,
oh->prcm.omap2.idlest_idle_bit);
-#if 0
} else if (cpu_is_omap44xx()) {
- ret = omap4_cm_wait_module_ready(oh->prcm.omap4.module_offs,
- oh->prcm.omap4.device_offs);
-#endif
+ ret = omap4_cm_wait_module_ready(oh->prcm.omap4.clkctrl_reg);
} else {
BUG();
};
_add_initiator_dep(oh, mpu_oh);
_enable_clocks(oh);
- if (oh->class->sysc) {
- if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
- _update_sysc_cache(oh);
- _sysc_enable(oh);
- }
-
r = _wait_target_ready(oh);
- if (!r)
+ if (!r) {
oh->_state = _HWMOD_STATE_ENABLED;
+ /* Access the sysconfig only if the target is ready */
+ if (oh->class->sysc) {
+ if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
+ _update_sysc_cache(oh);
+ _sysc_enable(oh);
+ }
+ } else {
+ pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
+ oh->name, r);
+ }
+
return r;
}
*/
static int _setup(struct omap_hwmod *oh)
{
- struct omap_hwmod_ocp_if *os;
- int i;
+ int i, r;
if (!oh)
return -EINVAL;
/* Set iclk autoidle mode */
if (oh->slaves_cnt > 0) {
- for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+ for (i = 0; i < oh->slaves_cnt; i++) {
+ struct omap_hwmod_ocp_if *os = oh->slaves[i];
struct clk *c = os->_clk;
- if (!c || IS_ERR(c))
+ if (!c)
continue;
if (os->flags & OCPIF_SWSUP_IDLE) {
oh->_state = _HWMOD_STATE_INITIALIZED;
- _enable(oh);
+ r = _enable(oh);
+ if (r) {
+ pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
+ oh->name, oh->_state);
+ return 0;
+ }
if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
/*
ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
for (i = 0; i < oh->slaves_cnt; i++)
- ret += (*oh->slaves + i)->addr_cnt;
+ ret += oh->slaves[i]->addr_cnt;
return ret;
}
for (i = 0; i < oh->slaves_cnt; i++) {
struct omap_hwmod_ocp_if *os;
- os = *oh->slaves + i;
+ os = oh->slaves[i];
for (j = 0; j < os->addr_cnt; j++) {
(res + r)->start = (os->addr + j)->pa_start;
/* MPU */
static struct omap_hwmod omap2420_mpu_hwmod = {
- .name = "mpu_hwmod",
+ .name = "mpu",
.class = &mpu_hwmod_class,
.main_clk = "mpu_ck",
.masters = omap2420_mpu_masters,
/* MPU */
static struct omap_hwmod omap2430_mpu_hwmod = {
- .name = "mpu_hwmod",
+ .name = "mpu",
.class = &mpu_hwmod_class,
.main_clk = "mpu_ck",
.masters = omap2430_mpu_masters,
/* MPU */
static struct omap_hwmod omap3xxx_mpu_hwmod = {
- .name = "mpu_hwmod",
+ .name = "mpu",
.class = &mpu_hwmod_class,
.main_clk = "arm_fck",
.masters = omap3xxx_mpu_masters,
{
u32 *option = data;
+ if (option == &wakeup_timer_milliseconds && val >= 1000)
+ return -EINVAL;
+
*option = val;
if (option == &enable_off_mode)
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
extern u32 wakeup_timer_seconds;
+extern u32 wakeup_timer_milliseconds;
extern struct omap_dm_timer *gptimer_wakeup;
#ifdef CONFIG_PM_DEBUG
f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
/* Ignore UART clocks. These are handled by UART core (serial.c) */
- f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
- f2 &= ~OMAP24XX_EN_UART3;
+ f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
+ f2 &= ~OMAP24XX_EN_UART3_MASK;
if (f1 | f2)
return 1;
l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
- omap2_gpio_prepare_for_retention();
+ omap2_gpio_prepare_for_idle(PWRDM_POWER_RET);
if (omap2_pm_debug) {
omap2_pm_dump(0, 0, 0);
tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
omap2_pm_dump(0, 1, tmp);
}
- omap2_gpio_resume_after_retention();
+ omap2_gpio_resume_after_idle();
clk_enable(osc_ck);
u32 l;
l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
- return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+ return l & (OMAP2420_EN_I2C2_MASK | OMAP2420_EN_I2C1_MASK);
}
static int sti_console_enabled;
/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
- if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
- OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
- OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+ if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
+ OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
+ OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
return 0;
/* Check for UART3. */
l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
- if (l & OMAP24XX_EN_UART3)
+ if (l & OMAP24XX_EN_UART3_MASK)
return 0;
if (sti_console_enabled)
return 0;
/* Try to enter MPU retention */
prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
- OMAP_LOGICRETSTATE,
+ OMAP_LOGICRETSTATE_MASK,
MPU_MOD, OMAP2_PM_PWSTCTRL);
} else {
/* Block MPU retention */
- prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD,
+ prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
OMAP2_PM_PWSTCTRL);
only_idle = 1;
}
u32 wken_wkup, mir1;
wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
- prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+ wken_wkup &= ~OMAP24XX_EN_GPT1_MASK;
+ prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
/* Mask GPT1 */
mir1 = omap_readl(0x480fe0a4);
struct powerdomain *pwrdm;
/* Enable autoidle */
- prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+ prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
OMAP2_PRCM_SYSCONFIG_OFFSET);
/*
clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
/* Enable clock autoidle for all domains */
- cm_write_mod_reg(OMAP24XX_AUTO_CAM |
- OMAP24XX_AUTO_MAILBOXES |
- OMAP24XX_AUTO_WDT4 |
- OMAP2420_AUTO_WDT3 |
- OMAP24XX_AUTO_MSPRO |
- OMAP2420_AUTO_MMC |
- OMAP24XX_AUTO_FAC |
- OMAP2420_AUTO_EAC |
- OMAP24XX_AUTO_HDQ |
- OMAP24XX_AUTO_UART2 |
- OMAP24XX_AUTO_UART1 |
- OMAP24XX_AUTO_I2C2 |
- OMAP24XX_AUTO_I2C1 |
- OMAP24XX_AUTO_MCSPI2 |
- OMAP24XX_AUTO_MCSPI1 |
- OMAP24XX_AUTO_MCBSP2 |
- OMAP24XX_AUTO_MCBSP1 |
- OMAP24XX_AUTO_GPT12 |
- OMAP24XX_AUTO_GPT11 |
- OMAP24XX_AUTO_GPT10 |
- OMAP24XX_AUTO_GPT9 |
- OMAP24XX_AUTO_GPT8 |
- OMAP24XX_AUTO_GPT7 |
- OMAP24XX_AUTO_GPT6 |
- OMAP24XX_AUTO_GPT5 |
- OMAP24XX_AUTO_GPT4 |
- OMAP24XX_AUTO_GPT3 |
- OMAP24XX_AUTO_GPT2 |
- OMAP2420_AUTO_VLYNQ |
- OMAP24XX_AUTO_DSS,
+ cm_write_mod_reg(OMAP24XX_AUTO_CAM_MASK |
+ OMAP24XX_AUTO_MAILBOXES_MASK |
+ OMAP24XX_AUTO_WDT4_MASK |
+ OMAP2420_AUTO_WDT3_MASK |
+ OMAP24XX_AUTO_MSPRO_MASK |
+ OMAP2420_AUTO_MMC_MASK |
+ OMAP24XX_AUTO_FAC_MASK |
+ OMAP2420_AUTO_EAC_MASK |
+ OMAP24XX_AUTO_HDQ_MASK |
+ OMAP24XX_AUTO_UART2_MASK |
+ OMAP24XX_AUTO_UART1_MASK |
+ OMAP24XX_AUTO_I2C2_MASK |
+ OMAP24XX_AUTO_I2C1_MASK |
+ OMAP24XX_AUTO_MCSPI2_MASK |
+ OMAP24XX_AUTO_MCSPI1_MASK |
+ OMAP24XX_AUTO_MCBSP2_MASK |
+ OMAP24XX_AUTO_MCBSP1_MASK |
+ OMAP24XX_AUTO_GPT12_MASK |
+ OMAP24XX_AUTO_GPT11_MASK |
+ OMAP24XX_AUTO_GPT10_MASK |
+ OMAP24XX_AUTO_GPT9_MASK |
+ OMAP24XX_AUTO_GPT8_MASK |
+ OMAP24XX_AUTO_GPT7_MASK |
+ OMAP24XX_AUTO_GPT6_MASK |
+ OMAP24XX_AUTO_GPT5_MASK |
+ OMAP24XX_AUTO_GPT4_MASK |
+ OMAP24XX_AUTO_GPT3_MASK |
+ OMAP24XX_AUTO_GPT2_MASK |
+ OMAP2420_AUTO_VLYNQ_MASK |
+ OMAP24XX_AUTO_DSS_MASK,
CORE_MOD, CM_AUTOIDLE1);
- cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
- OMAP24XX_AUTO_SSI |
- OMAP24XX_AUTO_USB,
+ cm_write_mod_reg(OMAP24XX_AUTO_UART3_MASK |
+ OMAP24XX_AUTO_SSI_MASK |
+ OMAP24XX_AUTO_USB_MASK,
CORE_MOD, CM_AUTOIDLE2);
- cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
- OMAP24XX_AUTO_GPMC |
- OMAP24XX_AUTO_SDMA,
+ cm_write_mod_reg(OMAP24XX_AUTO_SDRC_MASK |
+ OMAP24XX_AUTO_GPMC_MASK |
+ OMAP24XX_AUTO_SDMA_MASK,
CORE_MOD, CM_AUTOIDLE3);
- cm_write_mod_reg(OMAP24XX_AUTO_PKA |
- OMAP24XX_AUTO_AES |
- OMAP24XX_AUTO_RNG |
- OMAP24XX_AUTO_SHA |
- OMAP24XX_AUTO_DES,
+ cm_write_mod_reg(OMAP24XX_AUTO_PKA_MASK |
+ OMAP24XX_AUTO_AES_MASK |
+ OMAP24XX_AUTO_RNG_MASK |
+ OMAP24XX_AUTO_SHA_MASK |
+ OMAP24XX_AUTO_DES_MASK,
CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
- cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+ cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI_MASK, OMAP24XX_DSP_MOD,
+ CM_AUTOIDLE);
/* Put DPLL and both APLLs into autoidle mode */
cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
(0x03 << OMAP24XX_AUTO_54M_SHIFT),
PLL_MOD, CM_AUTOIDLE);
- cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
- OMAP24XX_AUTO_WDT1 |
- OMAP24XX_AUTO_MPU_WDT |
- OMAP24XX_AUTO_GPIOS |
- OMAP24XX_AUTO_32KSYNC |
- OMAP24XX_AUTO_GPT1,
+ cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL_MASK |
+ OMAP24XX_AUTO_WDT1_MASK |
+ OMAP24XX_AUTO_MPU_WDT_MASK |
+ OMAP24XX_AUTO_GPIOS_MASK |
+ OMAP24XX_AUTO_32KSYNC_MASK |
+ OMAP24XX_AUTO_GPT1_MASK,
WKUP_MOD, CM_AUTOIDLE);
/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
/* Configure automatic voltage transition */
prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
OMAP2_PRCM_VOLTSETUP_OFFSET);
- prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+ prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK |
(0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
- OMAP24XX_MEMRETCTRL |
+ OMAP24XX_MEMRETCTRL_MASK |
(0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
(0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
/* Enable wake-up events */
- prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+ prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
WKUP_MOD, PM_WKEN);
}
u32 enable_off_mode;
u32 sleep_while_idle;
u32 wakeup_timer_seconds;
+u32 wakeup_timer_milliseconds;
struct power_state {
struct powerdomain *pwrdm;
int timeout = 0;
if (omap_rev() >= OMAP3430_REV_ES3_1) {
- prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+ prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
/* Do a readback to assure write has been done */
prm_read_mod_reg(WKUP_MOD, PM_WKEN);
while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
- OMAP3430_ST_IO_CHAIN)) {
+ OMAP3430_ST_IO_CHAIN_MASK)) {
timeout++;
if (timeout > 1000) {
printk(KERN_ERR "Wake up daisy chain "
"activation failed.\n");
return;
}
- prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN,
+ prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
WKUP_MOD, PM_WKST);
}
}
static void omap3_disable_io_chain(void)
{
if (omap_rev() >= OMAP3430_REV_ES3_1)
- prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+ prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
}
static void omap3_core_save_context(void)
*/
static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
{
- u32 irqstatus_mpu;
+ u32 irqenable_mpu, irqstatus_mpu;
int c = 0;
- do {
- irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ irqenable_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ irqstatus_mpu &= irqenable_mpu;
- if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
+ do {
+ if (irqstatus_mpu & (OMAP3430_WKUP_ST_MASK |
+ OMAP3430_IO_ST_MASK)) {
c = _prcm_int_handle_wakeup();
/*
prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- } while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
+ irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ irqstatus_mpu &= irqenable_mpu;
+
+ } while (irqstatus_mpu);
return IRQ_HANDLED;
}
if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
- /* PER */
+ /* Enable IO-PAD and IO-CHAIN wakeups */
per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
+ if (per_next_state < PWRDM_POWER_ON ||
+ core_next_state < PWRDM_POWER_ON) {
+ prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
+ omap3_enable_io_chain();
+ }
+
+ /* PER */
if (per_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(2);
- omap2_gpio_prepare_for_retention();
+ omap2_gpio_prepare_for_idle(per_next_state);
if (per_next_state == PWRDM_POWER_OFF) {
if (core_next_state == PWRDM_POWER_ON) {
per_next_state = PWRDM_POWER_RET;
omap3_core_save_context();
omap3_prcm_save_context();
}
- /* Enable IO-PAD and IO-CHAIN wakeups */
- prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
- omap3_enable_io_chain();
}
+
omap3_intc_prepare_idle();
/*
omap_uart_resume_idle(0);
omap_uart_resume_idle(1);
if (core_next_state == PWRDM_POWER_OFF)
- prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF,
+ prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
}
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
+ omap2_gpio_resume_after_idle();
if (per_prev_state == PWRDM_POWER_OFF)
omap3_per_restore_context();
- omap2_gpio_resume_after_retention();
omap_uart_resume_idle(2);
if (per_state_modified)
pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
/* Disable IO-PAD and IO-CHAIN wakeup */
if (core_next_state < PWRDM_POWER_ON) {
- prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+ prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
omap3_disable_io_chain();
}
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state;
-static void omap2_pm_wakeup_on_timer(u32 seconds)
+static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
{
u32 tick_rate, cycles;
- if (!seconds)
+ if (!seconds && !milliseconds)
return;
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
- cycles = tick_rate * seconds;
+ cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
omap_dm_timer_stop(gptimer_wakeup);
omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
- pr_info("PM: Resume timer in %d secs (%d ticks at %d ticks/sec.)\n",
- seconds, cycles, tick_rate);
+ pr_info("PM: Resume timer in %u.%03u secs"
+ " (%d ticks at %d ticks/sec.)\n",
+ seconds, milliseconds, cycles, tick_rate);
}
static int omap3_pm_prepare(void)
struct power_state *pwrst;
int state, ret = 0;
- if (wakeup_timer_seconds)
- omap2_pm_wakeup_on_timer(wakeup_timer_seconds);
+ if (wakeup_timer_seconds || wakeup_timer_milliseconds)
+ omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
+ wakeup_timer_milliseconds);
/* Read current next_pwrsts */
list_for_each_entry(pwrst, &pwrst_list, node)
return;
/* Reset IVA2 */
- prm_write_mod_reg(OMAP3430_RST1_IVA2 |
- OMAP3430_RST2_IVA2 |
- OMAP3430_RST3_IVA2,
+ prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+ OMAP3430_RST2_IVA2_MASK |
+ OMAP3430_RST3_IVA2_MASK,
OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
/* Enable IVA2 clock */
cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
/* Reset IVA2 */
- prm_write_mod_reg(OMAP3430_RST1_IVA2 |
- OMAP3430_RST2_IVA2 |
- OMAP3430_RST3_IVA2,
+ prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+ OMAP3430_RST2_IVA2_MASK |
+ OMAP3430_RST3_IVA2_MASK,
OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
}
omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
/* reset modem */
- prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
- OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+ prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
CORE_MOD, OMAP2_RM_RSTCTRL);
prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
}
* Note that in the long run this should be done by clockfw
*/
cm_write_mod_reg(
- OMAP3430_AUTO_MODEM |
- OMAP3430ES2_AUTO_MMC3 |
- OMAP3430ES2_AUTO_ICR |
- OMAP3430_AUTO_AES2 |
- OMAP3430_AUTO_SHA12 |
- OMAP3430_AUTO_DES2 |
- OMAP3430_AUTO_MMC2 |
- OMAP3430_AUTO_MMC1 |
- OMAP3430_AUTO_MSPRO |
- OMAP3430_AUTO_HDQ |
- OMAP3430_AUTO_MCSPI4 |
- OMAP3430_AUTO_MCSPI3 |
- OMAP3430_AUTO_MCSPI2 |
- OMAP3430_AUTO_MCSPI1 |
- OMAP3430_AUTO_I2C3 |
- OMAP3430_AUTO_I2C2 |
- OMAP3430_AUTO_I2C1 |
- OMAP3430_AUTO_UART2 |
- OMAP3430_AUTO_UART1 |
- OMAP3430_AUTO_GPT11 |
- OMAP3430_AUTO_GPT10 |
- OMAP3430_AUTO_MCBSP5 |
- OMAP3430_AUTO_MCBSP1 |
- OMAP3430ES1_AUTO_FAC | /* This is es1 only */
- OMAP3430_AUTO_MAILBOXES |
- OMAP3430_AUTO_OMAPCTRL |
- OMAP3430ES1_AUTO_FSHOSTUSB |
- OMAP3430_AUTO_HSOTGUSB |
- OMAP3430_AUTO_SAD2D |
- OMAP3430_AUTO_SSI,
+ OMAP3430_AUTO_MODEM_MASK |
+ OMAP3430ES2_AUTO_MMC3_MASK |
+ OMAP3430ES2_AUTO_ICR_MASK |
+ OMAP3430_AUTO_AES2_MASK |
+ OMAP3430_AUTO_SHA12_MASK |
+ OMAP3430_AUTO_DES2_MASK |
+ OMAP3430_AUTO_MMC2_MASK |
+ OMAP3430_AUTO_MMC1_MASK |
+ OMAP3430_AUTO_MSPRO_MASK |
+ OMAP3430_AUTO_HDQ_MASK |
+ OMAP3430_AUTO_MCSPI4_MASK |
+ OMAP3430_AUTO_MCSPI3_MASK |
+ OMAP3430_AUTO_MCSPI2_MASK |
+ OMAP3430_AUTO_MCSPI1_MASK |
+ OMAP3430_AUTO_I2C3_MASK |
+ OMAP3430_AUTO_I2C2_MASK |
+ OMAP3430_AUTO_I2C1_MASK |
+ OMAP3430_AUTO_UART2_MASK |
+ OMAP3430_AUTO_UART1_MASK |
+ OMAP3430_AUTO_GPT11_MASK |
+ OMAP3430_AUTO_GPT10_MASK |
+ OMAP3430_AUTO_MCBSP5_MASK |
+ OMAP3430_AUTO_MCBSP1_MASK |
+ OMAP3430ES1_AUTO_FAC_MASK | /* This is es1 only */
+ OMAP3430_AUTO_MAILBOXES_MASK |
+ OMAP3430_AUTO_OMAPCTRL_MASK |
+ OMAP3430ES1_AUTO_FSHOSTUSB_MASK |
+ OMAP3430_AUTO_HSOTGUSB_MASK |
+ OMAP3430_AUTO_SAD2D_MASK |
+ OMAP3430_AUTO_SSI_MASK,
CORE_MOD, CM_AUTOIDLE1);
cm_write_mod_reg(
- OMAP3430_AUTO_PKA |
- OMAP3430_AUTO_AES1 |
- OMAP3430_AUTO_RNG |
- OMAP3430_AUTO_SHA11 |
- OMAP3430_AUTO_DES1,
+ OMAP3430_AUTO_PKA_MASK |
+ OMAP3430_AUTO_AES1_MASK |
+ OMAP3430_AUTO_RNG_MASK |
+ OMAP3430_AUTO_SHA11_MASK |
+ OMAP3430_AUTO_DES1_MASK,
CORE_MOD, CM_AUTOIDLE2);
if (omap_rev() > OMAP3430_REV_ES1_0) {
cm_write_mod_reg(
- OMAP3430_AUTO_MAD2D |
- OMAP3430ES2_AUTO_USBTLL,
+ OMAP3430_AUTO_MAD2D_MASK |
+ OMAP3430ES2_AUTO_USBTLL_MASK,
CORE_MOD, CM_AUTOIDLE3);
}
cm_write_mod_reg(
- OMAP3430_AUTO_WDT2 |
- OMAP3430_AUTO_WDT1 |
- OMAP3430_AUTO_GPIO1 |
- OMAP3430_AUTO_32KSYNC |
- OMAP3430_AUTO_GPT12 |
- OMAP3430_AUTO_GPT1 ,
+ OMAP3430_AUTO_WDT2_MASK |
+ OMAP3430_AUTO_WDT1_MASK |
+ OMAP3430_AUTO_GPIO1_MASK |
+ OMAP3430_AUTO_32KSYNC_MASK |
+ OMAP3430_AUTO_GPT12_MASK |
+ OMAP3430_AUTO_GPT1_MASK,
WKUP_MOD, CM_AUTOIDLE);
cm_write_mod_reg(
- OMAP3430_AUTO_DSS,
+ OMAP3430_AUTO_DSS_MASK,
OMAP3430_DSS_MOD,
CM_AUTOIDLE);
cm_write_mod_reg(
- OMAP3430_AUTO_CAM,
+ OMAP3430_AUTO_CAM_MASK,
OMAP3430_CAM_MOD,
CM_AUTOIDLE);
cm_write_mod_reg(
- OMAP3430_AUTO_GPIO6 |
- OMAP3430_AUTO_GPIO5 |
- OMAP3430_AUTO_GPIO4 |
- OMAP3430_AUTO_GPIO3 |
- OMAP3430_AUTO_GPIO2 |
- OMAP3430_AUTO_WDT3 |
- OMAP3430_AUTO_UART3 |
- OMAP3430_AUTO_GPT9 |
- OMAP3430_AUTO_GPT8 |
- OMAP3430_AUTO_GPT7 |
- OMAP3430_AUTO_GPT6 |
- OMAP3430_AUTO_GPT5 |
- OMAP3430_AUTO_GPT4 |
- OMAP3430_AUTO_GPT3 |
- OMAP3430_AUTO_GPT2 |
- OMAP3430_AUTO_MCBSP4 |
- OMAP3430_AUTO_MCBSP3 |
- OMAP3430_AUTO_MCBSP2,
+ OMAP3430_AUTO_GPIO6_MASK |
+ OMAP3430_AUTO_GPIO5_MASK |
+ OMAP3430_AUTO_GPIO4_MASK |
+ OMAP3430_AUTO_GPIO3_MASK |
+ OMAP3430_AUTO_GPIO2_MASK |
+ OMAP3430_AUTO_WDT3_MASK |
+ OMAP3430_AUTO_UART3_MASK |
+ OMAP3430_AUTO_GPT9_MASK |
+ OMAP3430_AUTO_GPT8_MASK |
+ OMAP3430_AUTO_GPT7_MASK |
+ OMAP3430_AUTO_GPT6_MASK |
+ OMAP3430_AUTO_GPT5_MASK |
+ OMAP3430_AUTO_GPT4_MASK |
+ OMAP3430_AUTO_GPT3_MASK |
+ OMAP3430_AUTO_GPT2_MASK |
+ OMAP3430_AUTO_MCBSP4_MASK |
+ OMAP3430_AUTO_MCBSP3_MASK |
+ OMAP3430_AUTO_MCBSP2_MASK,
OMAP3430_PER_MOD,
CM_AUTOIDLE);
if (omap_rev() > OMAP3430_REV_ES1_0) {
cm_write_mod_reg(
- OMAP3430ES2_AUTO_USBHOST,
+ OMAP3430ES2_AUTO_USBHOST_MASK,
OMAP3430ES2_USBHOST_MOD,
CM_AUTOIDLE);
}
- omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+ omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
/*
* Set all plls to autoidle. This is needed until autoidle is
OMAP3_PRM_CLKSRC_CTRL_OFFSET);
/* setup wakup source */
- prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
- OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+ prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
+ OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
WKUP_MOD, PM_WKEN);
/* No need to write EN_IO, that is always enabled */
- prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
- OMAP3430_EN_GPT12,
+ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
+ OMAP3430_GRPSEL_GPT1_MASK |
+ OMAP3430_GRPSEL_GPT12_MASK,
WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
/* For some reason IO doesn't generate wakeup event even if
* it is selected to mpu wakeup goup */
- prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+ prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* Enable PM_WKEN to support DSS LPR */
- prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+ prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
OMAP3430_DSS_MOD, PM_WKEN);
/* Enable wakeups in PER */
- prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
- OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
- OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
- OMAP3430_EN_MCBSP4,
+ prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
+ OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
+ OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
+ OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
+ OMAP3430_EN_MCBSP4_MASK,
OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
- prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
- OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
- OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
- OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
- OMAP3430_EN_MCBSP4,
+ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK |
+ OMAP3430_GRPSEL_GPIO3_MASK |
+ OMAP3430_GRPSEL_GPIO4_MASK |
+ OMAP3430_GRPSEL_GPIO5_MASK |
+ OMAP3430_GRPSEL_GPIO6_MASK |
+ OMAP3430_GRPSEL_UART3_MASK |
+ OMAP3430_GRPSEL_MCBSP2_MASK |
+ OMAP3430_GRPSEL_MCBSP3_MASK |
+ OMAP3430_GRPSEL_MCBSP4_MASK,
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
omap3_idle_init();
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
- /*
- * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for
- * IO-pad wakeup. Otherwise it will unnecessarily waste power
- * waking up PER with every CORE wakeup - see
- * http://marc.info/?l=linux-omap&m=121852150710062&w=2
- */
- clkdm_add_wkdep(per_clkdm, core_clkdm);
-
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
kmalloc(0x803F, GFP_KERNEL);
* Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
- *
* Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
+ * State counting code by Tero Kristo <tero.kristo@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#define OMAP_MEM4_ONSTATE_MASK OMAP4430_OCP_NRET_BANK_ONSTATE_MASK
/* OMAP3 and OMAP4 Memory Retstate Masks (common across all power domains) */
-#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE
-#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE
-#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE
-#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE
+#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK
+#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE_MASK
+#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK
+#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE_MASK
#define OMAP_MEM4_RETSTATE_MASK OMAP4430_OCP_NRET_BANK_RETSTATE_MASK
/* OMAP3 and OMAP4 Memory Status bits */
*/
int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
+ u32 v;
+
if (!pwrdm)
return -EINVAL;
* but the type of value returned is the same for each
* powerdomain.
*/
- prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE,
- (pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE)),
- pwrdm->prcm_offs, pwrstctrl_reg_offs);
+ v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
+ prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
+ pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
if (!pwrdm)
return -EINVAL;
- return prm_read_mod_bits_shift(pwrdm->prcm_offs,
- pwrstst_reg_offs, OMAP3430_LOGICSTATEST);
+ return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstst_reg_offs,
+ OMAP3430_LOGICSTATEST_MASK);
}
/**
* powerdomain.
*/
return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
- OMAP3430_LASTLOGICSTATEENTERED);
+ OMAP3430_LASTLOGICSTATEENTERED_MASK);
}
/**
* powerdomain.
*/
return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstctrl_reg_offs,
- OMAP3430_LOGICSTATEST);
+ OMAP3430_LOGICSTATEST_MASK);
}
/**
return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0;
}
+/**
+ * pwrdm_set_lowpwrstchange - Request a low power state change
+ * @pwrdm: struct powerdomain *
+ *
+ * Allows a powerdomain to transtion to a lower power sleep state
+ * from an existing sleep state without waking up the powerdomain.
+ * Returns -EINVAL if the powerdomain pointer is null or if the
+ * powerdomain does not support LOWPOWERSTATECHANGE, or returns 0
+ * upon success.
+ */
+int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+ if (!pwrdm)
+ return -EINVAL;
+
+ if (!(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE))
+ return -EINVAL;
+
+ pr_debug("powerdomain: %s: setting LOWPOWERSTATECHANGE bit\n",
+ pwrdm->name);
+
+ prm_rmw_mod_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
+ (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
+ pwrdm->prcm_offs, pwrstctrl_reg_offs);
+
+ return 0;
+}
+
/**
* pwrdm_wait_transition - wait for powerdomain power transition to finish
* @pwrdm: struct powerdomain * to wait for
/* XXX Is this udelay() value meaningful? */
while ((prm_read_mod_reg(pwrdm->prcm_offs, pwrstst_reg_offs) &
- OMAP_INTRANSITION) &&
+ OMAP_INTRANSITION_MASK) &&
(c++ < PWRDM_TRANSITION_BAILOUT))
udelay(1);
/*
* OMAP4 Power domains framework
*
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
*
* Abhijit Pagare (abhijitpagare@ti.com)
* Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley
+ * Paul Walmsley (paul@pwsan.com)
*
* This file is automatically generated from the OMAP hardware databases.
* We respectfully ask that any modifications to this file be coordinated
[3] = PWRDM_POWER_ON, /* ducati_l2ram */
[4] = PWRDM_POWER_ON, /* ducati_unicache */
},
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/* gfx_44xx_pwrdm: 3D accelerator power domain */
.pwrsts_mem_on = {
[0] = PWRDM_POWER_ON, /* gfx_mem */
},
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/* abe_44xx_pwrdm: Audio back end power domain */
[0] = PWRDM_POWER_ON, /* aessmem */
[1] = PWRDM_POWER_ON, /* periphmem */
},
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/* dss_44xx_pwrdm: Display subsystem power domain */
.pwrsts_mem_on = {
[0] = PWRDM_POWER_ON, /* dss_mem */
},
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/* tesla_44xx_pwrdm: Tesla processor power domain */
[1] = PWRDM_POWER_ON, /* tesla_l1 */
[2] = PWRDM_POWER_ON, /* tesla_l2 */
},
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/* wkup_44xx_pwrdm: Wake-up power domain */
.name = "wkup_pwrdm",
.prcm_offs = OMAP4430_PRM_WKUP_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
- .pwrsts = PWRDM_POWER_ON,
+ .pwrsts = PWRSTS_ON,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRDM_POWER_OFF, /* wkup_bank */
/* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
static struct powerdomain cpu0_44xx_pwrdm = {
.name = "cpu0_pwrdm",
- .prcm_offs = OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD,
+ .prcm_offs = OMAP4430_PRCM_MPU_CPU0_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
/* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
static struct powerdomain cpu1_44xx_pwrdm = {
.name = "cpu1_pwrdm",
- .prcm_offs = OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD,
+ .prcm_offs = OMAP4430_PRCM_MPU_CPU1_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
[2] = PWRDM_POWER_ON, /* tcm1_mem */
[3] = PWRDM_POWER_ON, /* tcm2_mem */
},
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/* cam_44xx_pwrdm: Camera subsystem power domain */
.pwrsts_mem_on = {
[0] = PWRDM_POWER_ON, /* cam_mem */
},
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/* l3init_44xx_pwrdm: L3 initators pheripherals power domain */
.pwrsts_mem_on = {
[0] = PWRDM_POWER_ON, /* l3init_bank1 */
},
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/* l4per_44xx_pwrdm: Target peripherals power domain */
[0] = PWRDM_POWER_ON, /* nonretained_bank */
[1] = PWRDM_POWER_ON, /* retained_bank */
},
+ .flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/*
.name = "always_on_core_pwrdm",
.prcm_offs = OMAP4430_PRM_ALWAYS_ON_MOD,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
- .pwrsts = PWRDM_POWER_ON,
+ .pwrsts = PWRSTS_ON,
};
/* cefuse_44xx_pwrdm: Customer efuse controller power domain */
#define OMAP4430_SCRM_SCRM_MOD 0x0000
-/* CHIRONSS instances */
+/* PRCM_MPU instances */
-#define OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD 0x0000
-#define OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD 0x0200
-#define OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD 0x0400
-#define OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD 0x0800
-
-/* Base Addresses for the OMAP4 */
-
-#define OMAP4430_CM1_BASE 0x4a004000
-#define OMAP4430_CM2_BASE 0x4a008000
-#define OMAP4430_PRM_BASE 0x4a306000
-#define OMAP4430_SCRM_BASE 0x4a30a000
-#define OMAP4430_CHIRONSS_BASE 0x48243000
+#define OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD 0x0000
+#define OMAP4430_PRCM_MPU_DEVICE_PRM_MOD 0x0200
+#define OMAP4430_PRCM_MPU_CPU0_MOD 0x0400
+#define OMAP4430_PRCM_MPU_CPU1_MOD 0x0800
/* 24XX register bits shared between CM & PRM registers */
/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
#define OMAP2420_EN_MMC_SHIFT 26
-#define OMAP2420_EN_MMC (1 << 26)
+#define OMAP2420_EN_MMC_MASK (1 << 26)
#define OMAP24XX_EN_UART2_SHIFT 22
-#define OMAP24XX_EN_UART2 (1 << 22)
+#define OMAP24XX_EN_UART2_MASK (1 << 22)
#define OMAP24XX_EN_UART1_SHIFT 21
-#define OMAP24XX_EN_UART1 (1 << 21)
+#define OMAP24XX_EN_UART1_MASK (1 << 21)
#define OMAP24XX_EN_MCSPI2_SHIFT 18
-#define OMAP24XX_EN_MCSPI2 (1 << 18)
+#define OMAP24XX_EN_MCSPI2_MASK (1 << 18)
#define OMAP24XX_EN_MCSPI1_SHIFT 17
-#define OMAP24XX_EN_MCSPI1 (1 << 17)
+#define OMAP24XX_EN_MCSPI1_MASK (1 << 17)
#define OMAP24XX_EN_MCBSP2_SHIFT 16
-#define OMAP24XX_EN_MCBSP2 (1 << 16)
+#define OMAP24XX_EN_MCBSP2_MASK (1 << 16)
#define OMAP24XX_EN_MCBSP1_SHIFT 15
-#define OMAP24XX_EN_MCBSP1 (1 << 15)
+#define OMAP24XX_EN_MCBSP1_MASK (1 << 15)
#define OMAP24XX_EN_GPT12_SHIFT 14
-#define OMAP24XX_EN_GPT12 (1 << 14)
+#define OMAP24XX_EN_GPT12_MASK (1 << 14)
#define OMAP24XX_EN_GPT11_SHIFT 13
-#define OMAP24XX_EN_GPT11 (1 << 13)
+#define OMAP24XX_EN_GPT11_MASK (1 << 13)
#define OMAP24XX_EN_GPT10_SHIFT 12
-#define OMAP24XX_EN_GPT10 (1 << 12)
+#define OMAP24XX_EN_GPT10_MASK (1 << 12)
#define OMAP24XX_EN_GPT9_SHIFT 11
-#define OMAP24XX_EN_GPT9 (1 << 11)
+#define OMAP24XX_EN_GPT9_MASK (1 << 11)
#define OMAP24XX_EN_GPT8_SHIFT 10
-#define OMAP24XX_EN_GPT8 (1 << 10)
+#define OMAP24XX_EN_GPT8_MASK (1 << 10)
#define OMAP24XX_EN_GPT7_SHIFT 9
-#define OMAP24XX_EN_GPT7 (1 << 9)
+#define OMAP24XX_EN_GPT7_MASK (1 << 9)
#define OMAP24XX_EN_GPT6_SHIFT 8
-#define OMAP24XX_EN_GPT6 (1 << 8)
+#define OMAP24XX_EN_GPT6_MASK (1 << 8)
#define OMAP24XX_EN_GPT5_SHIFT 7
-#define OMAP24XX_EN_GPT5 (1 << 7)
+#define OMAP24XX_EN_GPT5_MASK (1 << 7)
#define OMAP24XX_EN_GPT4_SHIFT 6
-#define OMAP24XX_EN_GPT4 (1 << 6)
+#define OMAP24XX_EN_GPT4_MASK (1 << 6)
#define OMAP24XX_EN_GPT3_SHIFT 5
-#define OMAP24XX_EN_GPT3 (1 << 5)
+#define OMAP24XX_EN_GPT3_MASK (1 << 5)
#define OMAP24XX_EN_GPT2_SHIFT 4
-#define OMAP24XX_EN_GPT2 (1 << 4)
+#define OMAP24XX_EN_GPT2_MASK (1 << 4)
#define OMAP2420_EN_VLYNQ_SHIFT 3
-#define OMAP2420_EN_VLYNQ (1 << 3)
+#define OMAP2420_EN_VLYNQ_MASK (1 << 3)
/* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
#define OMAP2430_EN_GPIO5_SHIFT 10
-#define OMAP2430_EN_GPIO5 (1 << 10)
+#define OMAP2430_EN_GPIO5_MASK (1 << 10)
#define OMAP2430_EN_MCSPI3_SHIFT 9
-#define OMAP2430_EN_MCSPI3 (1 << 9)
+#define OMAP2430_EN_MCSPI3_MASK (1 << 9)
#define OMAP2430_EN_MMCHS2_SHIFT 8
-#define OMAP2430_EN_MMCHS2 (1 << 8)
+#define OMAP2430_EN_MMCHS2_MASK (1 << 8)
#define OMAP2430_EN_MMCHS1_SHIFT 7
-#define OMAP2430_EN_MMCHS1 (1 << 7)
+#define OMAP2430_EN_MMCHS1_MASK (1 << 7)
#define OMAP24XX_EN_UART3_SHIFT 2
-#define OMAP24XX_EN_UART3 (1 << 2)
+#define OMAP24XX_EN_UART3_MASK (1 << 2)
#define OMAP24XX_EN_USB_SHIFT 0
-#define OMAP24XX_EN_USB (1 << 0)
+#define OMAP24XX_EN_USB_MASK (1 << 0)
/* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
#define OMAP2430_EN_MDM_INTC_SHIFT 11
-#define OMAP2430_EN_MDM_INTC (1 << 11)
+#define OMAP2430_EN_MDM_INTC_MASK (1 << 11)
#define OMAP2430_EN_USBHS_SHIFT 6
-#define OMAP2430_EN_USBHS (1 << 6)
+#define OMAP2430_EN_USBHS_MASK (1 << 6)
/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
#define OMAP2420_ST_MMC_SHIFT 26
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
#define OMAP24XX_EN_GPIOS_SHIFT 2
-#define OMAP24XX_EN_GPIOS (1 << 2)
+#define OMAP24XX_EN_GPIOS_MASK (1 << 2)
#define OMAP24XX_EN_GPT1_SHIFT 0
-#define OMAP24XX_EN_GPT1 (1 << 0)
+#define OMAP24XX_EN_GPT1_MASK (1 << 0)
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2)
#define OMAP3430_REV_MASK (0xff << 0)
/* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */
-#define OMAP3430_AUTOIDLE (1 << 0)
+#define OMAP3430_AUTOIDLE_MASK (1 << 0)
/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
-#define OMAP3430_EN_MMC2 (1 << 25)
+#define OMAP3430_EN_MMC2_MASK (1 << 25)
#define OMAP3430_EN_MMC2_SHIFT 25
-#define OMAP3430_EN_MMC1 (1 << 24)
+#define OMAP3430_EN_MMC1_MASK (1 << 24)
#define OMAP3430_EN_MMC1_SHIFT 24
-#define OMAP3430_EN_MCSPI4 (1 << 21)
+#define OMAP3430_EN_MCSPI4_MASK (1 << 21)
#define OMAP3430_EN_MCSPI4_SHIFT 21
-#define OMAP3430_EN_MCSPI3 (1 << 20)
+#define OMAP3430_EN_MCSPI3_MASK (1 << 20)
#define OMAP3430_EN_MCSPI3_SHIFT 20
-#define OMAP3430_EN_MCSPI2 (1 << 19)
+#define OMAP3430_EN_MCSPI2_MASK (1 << 19)
#define OMAP3430_EN_MCSPI2_SHIFT 19
-#define OMAP3430_EN_MCSPI1 (1 << 18)
+#define OMAP3430_EN_MCSPI1_MASK (1 << 18)
#define OMAP3430_EN_MCSPI1_SHIFT 18
-#define OMAP3430_EN_I2C3 (1 << 17)
+#define OMAP3430_EN_I2C3_MASK (1 << 17)
#define OMAP3430_EN_I2C3_SHIFT 17
-#define OMAP3430_EN_I2C2 (1 << 16)
+#define OMAP3430_EN_I2C2_MASK (1 << 16)
#define OMAP3430_EN_I2C2_SHIFT 16
-#define OMAP3430_EN_I2C1 (1 << 15)
+#define OMAP3430_EN_I2C1_MASK (1 << 15)
#define OMAP3430_EN_I2C1_SHIFT 15
-#define OMAP3430_EN_UART2 (1 << 14)
+#define OMAP3430_EN_UART2_MASK (1 << 14)
#define OMAP3430_EN_UART2_SHIFT 14
-#define OMAP3430_EN_UART1 (1 << 13)
+#define OMAP3430_EN_UART1_MASK (1 << 13)
#define OMAP3430_EN_UART1_SHIFT 13
-#define OMAP3430_EN_GPT11 (1 << 12)
+#define OMAP3430_EN_GPT11_MASK (1 << 12)
#define OMAP3430_EN_GPT11_SHIFT 12
-#define OMAP3430_EN_GPT10 (1 << 11)
+#define OMAP3430_EN_GPT10_MASK (1 << 11)
#define OMAP3430_EN_GPT10_SHIFT 11
-#define OMAP3430_EN_MCBSP5 (1 << 10)
+#define OMAP3430_EN_MCBSP5_MASK (1 << 10)
#define OMAP3430_EN_MCBSP5_SHIFT 10
-#define OMAP3430_EN_MCBSP1 (1 << 9)
+#define OMAP3430_EN_MCBSP1_MASK (1 << 9)
#define OMAP3430_EN_MCBSP1_SHIFT 9
-#define OMAP3430_EN_FSHOSTUSB (1 << 5)
+#define OMAP3430_EN_FSHOSTUSB_MASK (1 << 5)
#define OMAP3430_EN_FSHOSTUSB_SHIFT 5
-#define OMAP3430_EN_D2D (1 << 3)
+#define OMAP3430_EN_D2D_MASK (1 << 3)
#define OMAP3430_EN_D2D_SHIFT 3
/* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
-#define OMAP3430_EN_HSOTGUSB (1 << 4)
-#define OMAP3430_EN_HSOTGUSB_SHIFT 4
+#define OMAP3430_EN_HSOTGUSB_MASK (1 << 4)
+#define OMAP3430_EN_HSOTGUSB_SHIFT 4
/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
#define OMAP3430_ST_MMC2_SHIFT 25
#define OMAP3430_ST_D2D_MASK (1 << 3)
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_GPIO1 (1 << 3)
+#define OMAP3430_EN_GPIO1_MASK (1 << 3)
#define OMAP3430_EN_GPIO1_SHIFT 3
-#define OMAP3430_EN_GPT12 (1 << 1)
+#define OMAP3430_EN_GPT12_MASK (1 << 1)
#define OMAP3430_EN_GPT12_SHIFT 1
-#define OMAP3430_EN_GPT1 (1 << 0)
+#define OMAP3430_EN_GPT1_MASK (1 << 0)
#define OMAP3430_EN_GPT1_SHIFT 0
/* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_SR2 (1 << 7)
+#define OMAP3430_EN_SR2_MASK (1 << 7)
#define OMAP3430_EN_SR2_SHIFT 7
-#define OMAP3430_EN_SR1 (1 << 6)
+#define OMAP3430_EN_SR1_MASK (1 << 6)
#define OMAP3430_EN_SR1_SHIFT 6
/* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_GPT12 (1 << 1)
+#define OMAP3430_EN_GPT12_MASK (1 << 1)
#define OMAP3430_EN_GPT12_SHIFT 1
/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX,
* PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits
*/
-#define OMAP3430_EN_MPU (1 << 1)
+#define OMAP3430_EN_MPU_MASK (1 << 1)
#define OMAP3430_EN_MPU_SHIFT 1
/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
-#define OMAP3430_EN_GPIO6 (1 << 17)
+#define OMAP3430_EN_GPIO6_MASK (1 << 17)
#define OMAP3430_EN_GPIO6_SHIFT 17
-#define OMAP3430_EN_GPIO5 (1 << 16)
+#define OMAP3430_EN_GPIO5_MASK (1 << 16)
#define OMAP3430_EN_GPIO5_SHIFT 16
-#define OMAP3430_EN_GPIO4 (1 << 15)
+#define OMAP3430_EN_GPIO4_MASK (1 << 15)
#define OMAP3430_EN_GPIO4_SHIFT 15
-#define OMAP3430_EN_GPIO3 (1 << 14)
+#define OMAP3430_EN_GPIO3_MASK (1 << 14)
#define OMAP3430_EN_GPIO3_SHIFT 14
-#define OMAP3430_EN_GPIO2 (1 << 13)
+#define OMAP3430_EN_GPIO2_MASK (1 << 13)
#define OMAP3430_EN_GPIO2_SHIFT 13
-#define OMAP3430_EN_UART3 (1 << 11)
+#define OMAP3430_EN_UART3_MASK (1 << 11)
#define OMAP3430_EN_UART3_SHIFT 11
-#define OMAP3430_EN_GPT9 (1 << 10)
+#define OMAP3430_EN_GPT9_MASK (1 << 10)
#define OMAP3430_EN_GPT9_SHIFT 10
-#define OMAP3430_EN_GPT8 (1 << 9)
+#define OMAP3430_EN_GPT8_MASK (1 << 9)
#define OMAP3430_EN_GPT8_SHIFT 9
-#define OMAP3430_EN_GPT7 (1 << 8)
+#define OMAP3430_EN_GPT7_MASK (1 << 8)
#define OMAP3430_EN_GPT7_SHIFT 8
-#define OMAP3430_EN_GPT6 (1 << 7)
+#define OMAP3430_EN_GPT6_MASK (1 << 7)
#define OMAP3430_EN_GPT6_SHIFT 7
-#define OMAP3430_EN_GPT5 (1 << 6)
+#define OMAP3430_EN_GPT5_MASK (1 << 6)
#define OMAP3430_EN_GPT5_SHIFT 6
-#define OMAP3430_EN_GPT4 (1 << 5)
+#define OMAP3430_EN_GPT4_MASK (1 << 5)
#define OMAP3430_EN_GPT4_SHIFT 5
-#define OMAP3430_EN_GPT3 (1 << 4)
+#define OMAP3430_EN_GPT3_MASK (1 << 4)
#define OMAP3430_EN_GPT3_SHIFT 4
-#define OMAP3430_EN_GPT2 (1 << 3)
+#define OMAP3430_EN_GPT2_MASK (1 << 3)
#define OMAP3430_EN_GPT2_SHIFT 3
/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */
/* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits
* be ST_* bits instead? */
-#define OMAP3430_EN_MCBSP4 (1 << 2)
+#define OMAP3430_EN_MCBSP4_MASK (1 << 2)
#define OMAP3430_EN_MCBSP4_SHIFT 2
-#define OMAP3430_EN_MCBSP3 (1 << 1)
+#define OMAP3430_EN_MCBSP3_MASK (1 << 1)
#define OMAP3430_EN_MCBSP3_SHIFT 1
-#define OMAP3430_EN_MCBSP2 (1 << 0)
+#define OMAP3430_EN_MCBSP2_MASK (1 << 0)
#define OMAP3430_EN_MCBSP2_SHIFT 0
/* CM_IDLEST_PER, PM_WKST_PER shared bits */
WARN_ON(1);
if (cpu_is_omap24xx() || cpu_is_omap34xx())
- prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
+ prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
OMAP2_RM_RSTCTRL);
if (cpu_is_omap44xx())
- prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
+ prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
OMAP4_RM_RSTCTRL);
}
/* Bits shared between registers */
/* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_ST (1 << 2)
-#define OMAP24XX_WKUP2_ST (1 << 1)
-#define OMAP24XX_WKUP1_ST (1 << 0)
+#define OMAP24XX_VOLTTRANS_ST_MASK (1 << 2)
+#define OMAP24XX_WKUP2_ST_MASK (1 << 1)
+#define OMAP24XX_WKUP1_ST_MASK (1 << 0)
/* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_EN (1 << 2)
-#define OMAP24XX_WKUP2_EN (1 << 1)
-#define OMAP24XX_WKUP1_EN (1 << 0)
+#define OMAP24XX_VOLTTRANS_EN_MASK (1 << 2)
+#define OMAP24XX_WKUP2_EN_MASK (1 << 1)
+#define OMAP24XX_WKUP1_EN_MASK (1 << 0)
/* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
#define OMAP24XX_EN_MPU_SHIFT 1
*/
#define OMAP24XX_MEMONSTATE_SHIFT 10
#define OMAP24XX_MEMONSTATE_MASK (0x3 << 10)
-#define OMAP24XX_MEMRETSTATE (1 << 3)
+#define OMAP24XX_MEMRETSTATE_MASK (1 << 3)
/* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */
-#define OMAP24XX_FORCESTATE (1 << 18)
+#define OMAP24XX_FORCESTATE_MASK (1 << 18)
/*
* PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP,
* PM_PWSTST_MDM shared bits
*/
-#define OMAP24XX_CLKACTIVITY (1 << 19)
+#define OMAP24XX_CLKACTIVITY_MASK (1 << 19)
/* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */
#define OMAP24XX_LASTSTATEENTERED_SHIFT 4
#define OMAP24XX_REV_MASK (0xff << 0)
/* PRCM_SYSCONFIG */
-#define OMAP24XX_AUTOIDLE (1 << 0)
+#define OMAP24XX_AUTOIDLE_MASK (1 << 0)
/* PRCM_IRQSTATUS_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_ST (1 << 6)
-#define OMAP24XX_TRANSITION_ST (1 << 5)
-#define OMAP24XX_EVGENOFF_ST (1 << 4)
-#define OMAP24XX_EVGENON_ST (1 << 3)
+#define OMAP2430_DPLL_RECAL_ST_MASK (1 << 6)
+#define OMAP24XX_TRANSITION_ST_MASK (1 << 5)
+#define OMAP24XX_EVGENOFF_ST_MASK (1 << 4)
+#define OMAP24XX_EVGENON_ST_MASK (1 << 3)
/* PRCM_IRQENABLE_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_EN (1 << 6)
-#define OMAP24XX_TRANSITION_EN (1 << 5)
-#define OMAP24XX_EVGENOFF_EN (1 << 4)
-#define OMAP24XX_EVGENON_EN (1 << 3)
+#define OMAP2430_DPLL_RECAL_EN_MASK (1 << 6)
+#define OMAP24XX_TRANSITION_EN_MASK (1 << 5)
+#define OMAP24XX_EVGENOFF_EN_MASK (1 << 4)
+#define OMAP24XX_EVGENON_EN_MASK (1 << 3)
/* PRCM_VOLTCTRL */
-#define OMAP24XX_AUTO_EXTVOLT (1 << 15)
-#define OMAP24XX_FORCE_EXTVOLT (1 << 14)
+#define OMAP24XX_AUTO_EXTVOLT_MASK (1 << 15)
+#define OMAP24XX_FORCE_EXTVOLT_MASK (1 << 14)
#define OMAP24XX_SETOFF_LEVEL_SHIFT 12
#define OMAP24XX_SETOFF_LEVEL_MASK (0x3 << 12)
-#define OMAP24XX_MEMRETCTRL (1 << 8)
+#define OMAP24XX_MEMRETCTRL_MASK (1 << 8)
#define OMAP24XX_SETRET_LEVEL_SHIFT 6
#define OMAP24XX_SETRET_LEVEL_MASK (0x3 << 6)
#define OMAP24XX_VOLT_LEVEL_SHIFT 0
/* PRCM_CLKOUT_CTRL */
#define OMAP2420_CLKOUT2_EN_SHIFT 15
-#define OMAP2420_CLKOUT2_EN (1 << 15)
+#define OMAP2420_CLKOUT2_EN_MASK (1 << 15)
#define OMAP2420_CLKOUT2_DIV_SHIFT 11
#define OMAP2420_CLKOUT2_DIV_MASK (0x7 << 11)
#define OMAP2420_CLKOUT2_SOURCE_SHIFT 8
#define OMAP2420_CLKOUT2_SOURCE_MASK (0x3 << 8)
#define OMAP24XX_CLKOUT_EN_SHIFT 7
-#define OMAP24XX_CLKOUT_EN (1 << 7)
+#define OMAP24XX_CLKOUT_EN_MASK (1 << 7)
#define OMAP24XX_CLKOUT_DIV_SHIFT 3
#define OMAP24XX_CLKOUT_DIV_MASK (0x7 << 3)
#define OMAP24XX_CLKOUT_SOURCE_SHIFT 0
/* PRCM_CLKEMUL_CTRL */
#define OMAP24XX_EMULATION_EN_SHIFT 0
-#define OMAP24XX_EMULATION_EN (1 << 0)
+#define OMAP24XX_EMULATION_EN_MASK (1 << 0)
/* PRCM_CLKCFG_CTRL */
-#define OMAP24XX_VALID_CONFIG (1 << 0)
+#define OMAP24XX_VALID_CONFIG_MASK (1 << 0)
/* PRCM_CLKCFG_STATUS */
-#define OMAP24XX_CONFIG_STATUS (1 << 0)
+#define OMAP24XX_CONFIG_STATUS_MASK (1 << 0)
/* PRCM_VOLTSETUP specific bits */
/* PRCM_CLKSSETUP specific bits */
/* PRCM_POLCTRL */
-#define OMAP2420_CLKOUT2_POL (1 << 10)
-#define OMAP24XX_CLKOUT_POL (1 << 9)
-#define OMAP24XX_CLKREQ_POL (1 << 8)
-#define OMAP2430_USE_POWEROK (1 << 2)
-#define OMAP2430_POWEROK_POL (1 << 1)
-#define OMAP24XX_EXTVOL_POL (1 << 0)
+#define OMAP2420_CLKOUT2_POL_MASK (1 << 10)
+#define OMAP24XX_CLKOUT_POL_MASK (1 << 9)
+#define OMAP24XX_CLKREQ_POL_MASK (1 << 8)
+#define OMAP2430_USE_POWEROK_MASK (1 << 2)
+#define OMAP2430_POWEROK_POL_MASK (1 << 1)
+#define OMAP24XX_EXTVOL_POL_MASK (1 << 0)
/* RM_RSTST_MPU specific bits */
/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
/* PM_EVEGENOFFTIM_MPU specific bits */
/* PM_PWSTCTRL_MPU specific bits */
-#define OMAP2430_FORCESTATE (1 << 18)
+#define OMAP2430_FORCESTATE_MASK (1 << 18)
/* PM_PWSTST_MPU specific bits */
/* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */
/* PM_WKST2_CORE specific bits */
/* PM_WKDEP_CORE specific bits*/
-#define OMAP2430_PM_WKDEP_CORE_EN_MDM (1 << 5)
-#define OMAP24XX_PM_WKDEP_CORE_EN_GFX (1 << 3)
-#define OMAP24XX_PM_WKDEP_CORE_EN_DSP (1 << 2)
+#define OMAP2430_PM_WKDEP_CORE_EN_MDM_MASK (1 << 5)
+#define OMAP24XX_PM_WKDEP_CORE_EN_GFX_MASK (1 << 3)
+#define OMAP24XX_PM_WKDEP_CORE_EN_DSP_MASK (1 << 2)
/* PM_PWSTCTRL_CORE specific bits */
-#define OMAP24XX_MEMORYCHANGE (1 << 20)
+#define OMAP24XX_MEMORYCHANGE_MASK (1 << 20)
#define OMAP24XX_MEM3ONSTATE_SHIFT 14
#define OMAP24XX_MEM3ONSTATE_MASK (0x3 << 14)
#define OMAP24XX_MEM2ONSTATE_SHIFT 12
#define OMAP24XX_MEM2ONSTATE_MASK (0x3 << 12)
#define OMAP24XX_MEM1ONSTATE_SHIFT 10
#define OMAP24XX_MEM1ONSTATE_MASK (0x3 << 10)
-#define OMAP24XX_MEM3RETSTATE (1 << 5)
-#define OMAP24XX_MEM2RETSTATE (1 << 4)
-#define OMAP24XX_MEM1RETSTATE (1 << 3)
+#define OMAP24XX_MEM3RETSTATE_MASK (1 << 5)
+#define OMAP24XX_MEM2RETSTATE_MASK (1 << 4)
+#define OMAP24XX_MEM1RETSTATE_MASK (1 << 3)
/* PM_PWSTST_CORE specific bits */
#define OMAP24XX_MEM3STATEST_SHIFT 14
#define OMAP24XX_MEM1STATEST_MASK (0x3 << 10)
/* RM_RSTCTRL_GFX */
-#define OMAP24XX_GFX_RST (1 << 0)
+#define OMAP24XX_GFX_RST_MASK (1 << 0)
/* RM_RSTST_GFX specific bits */
-#define OMAP24XX_GFX_SW_RST (1 << 4)
+#define OMAP24XX_GFX_SW_RST_MASK (1 << 4)
/* PM_PWSTCTRL_GFX specific bits */
/* RM_RSTST_WKUP specific bits */
/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
-#define OMAP24XX_EXTWMPU_RST (1 << 6)
-#define OMAP24XX_SECU_WD_RST (1 << 5)
-#define OMAP24XX_MPU_WD_RST (1 << 4)
-#define OMAP24XX_SECU_VIOL_RST (1 << 3)
+#define OMAP24XX_EXTWMPU_RST_MASK (1 << 6)
+#define OMAP24XX_SECU_WD_RST_MASK (1 << 5)
+#define OMAP24XX_MPU_WD_RST_MASK (1 << 4)
+#define OMAP24XX_SECU_VIOL_RST_MASK (1 << 3)
/* PM_WKEN_WKUP specific bits */
/* PM_WKST_WKUP specific bits */
/* RM_RSTCTRL_DSP */
-#define OMAP2420_RST_IVA (1 << 8)
-#define OMAP24XX_RST2_DSP (1 << 1)
-#define OMAP24XX_RST1_DSP (1 << 0)
+#define OMAP2420_RST_IVA_MASK (1 << 8)
+#define OMAP24XX_RST2_DSP_MASK (1 << 1)
+#define OMAP24XX_RST1_DSP_MASK (1 << 0)
/* RM_RSTST_DSP specific bits */
/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */
-#define OMAP2420_IVA_SW_RST (1 << 8)
-#define OMAP24XX_DSP_SW_RST2 (1 << 5)
-#define OMAP24XX_DSP_SW_RST1 (1 << 4)
+#define OMAP2420_IVA_SW_RST_MASK (1 << 8)
+#define OMAP24XX_DSP_SW_RST2_MASK (1 << 5)
+#define OMAP24XX_DSP_SW_RST1_MASK (1 << 4)
/* PM_WKDEP_DSP specific bits */
/* 2430 only: MEMONSTATE, MEMRETSTATE */
#define OMAP2420_MEMIONSTATE_SHIFT 12
#define OMAP2420_MEMIONSTATE_MASK (0x3 << 12)
-#define OMAP2420_MEMIRETSTATE (1 << 4)
+#define OMAP2420_MEMIRETSTATE_MASK (1 << 4)
/* PM_PWSTST_DSP specific bits */
/* MEMSTATEST is 2430 only */
/* RM_RSTCTRL_MDM */
/* 2430 only */
-#define OMAP2430_PWRON1_MDM (1 << 1)
-#define OMAP2430_RST1_MDM (1 << 0)
+#define OMAP2430_PWRON1_MDM_MASK (1 << 1)
+#define OMAP2430_RST1_MDM_MASK (1 << 0)
/* RM_RSTST_MDM specific bits */
/* 2430 only */
-#define OMAP2430_MDM_SECU_VIOL (1 << 6)
-#define OMAP2430_MDM_SW_PWRON1 (1 << 5)
-#define OMAP2430_MDM_SW_RST1 (1 << 4)
+#define OMAP2430_MDM_SECU_VIOL_MASK (1 << 6)
+#define OMAP2430_MDM_SW_PWRON1_MASK (1 << 5)
+#define OMAP2430_MDM_SW_RST1_MASK (1 << 4)
/* PM_WKEN_MDM */
/* 2430 only */
-#define OMAP2430_PM_WKEN_MDM_EN_MDM (1 << 0)
+#define OMAP2430_PM_WKEN_MDM_EN_MDM_MASK (1 << 0)
/* PM_WKST_MDM specific bits */
/* 2430 only */
/* PM_PWSTCTRL_MDM specific bits */
/* 2430 only */
-#define OMAP2430_KILLDOMAINWKUP (1 << 19)
+#define OMAP2430_KILLDOMAINWKUP_MASK (1 << 19)
/* PM_PWSTST_MDM specific bits */
/* 2430 only */
#define OMAP3430_ERRORGAIN_MASK (0xff << 16)
#define OMAP3430_INITVOLTAGE_SHIFT 8
#define OMAP3430_INITVOLTAGE_MASK (0xff << 8)
-#define OMAP3430_TIMEOUTEN (1 << 3)
-#define OMAP3430_INITVDD (1 << 2)
-#define OMAP3430_FORCEUPDATE (1 << 1)
-#define OMAP3430_VPENABLE (1 << 0)
+#define OMAP3430_TIMEOUTEN_MASK (1 << 3)
+#define OMAP3430_INITVDD_MASK (1 << 2)
+#define OMAP3430_FORCEUPDATE_MASK (1 << 1)
+#define OMAP3430_VPENABLE_MASK (1 << 0)
/* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */
#define OMAP3430_SMPSWAITTIMEMIN_SHIFT 8
#define OMAP3430_VPVOLTAGE_MASK (0xff << 0)
/* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */
-#define OMAP3430_VPINIDLE (1 << 0)
+#define OMAP3430_VPINIDLE_MASK (1 << 0)
/* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
#define OMAP3430_EN_PER_SHIFT 7
#define OMAP3430_EN_PER_MASK (1 << 7)
/* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
-#define OMAP3430_MEMORYCHANGE (1 << 3)
+#define OMAP3430_MEMORYCHANGE_MASK (1 << 3)
/* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */
-#define OMAP3430_LOGICSTATEST (1 << 2)
+#define OMAP3430_LOGICSTATEST_MASK (1 << 2)
/* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
-#define OMAP3430_LASTLOGICSTATEENTERED (1 << 2)
+#define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2)
/*
* PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
* PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM,
* PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits
*/
-#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT 0
-#define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0)
+#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT 0
+#define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0)
/* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */
-#define OMAP3430_WKUP_ST (1 << 0)
+#define OMAP3430_WKUP_ST_MASK (1 << 0)
/* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */
-#define OMAP3430_WKUP_EN (1 << 0)
+#define OMAP3430_WKUP_EN_MASK (1 << 0)
/* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */
-#define OMAP3430_GRPSEL_MMC2 (1 << 25)
-#define OMAP3430_GRPSEL_MMC1 (1 << 24)
-#define OMAP3430_GRPSEL_MCSPI4 (1 << 21)
-#define OMAP3430_GRPSEL_MCSPI3 (1 << 20)
-#define OMAP3430_GRPSEL_MCSPI2 (1 << 19)
-#define OMAP3430_GRPSEL_MCSPI1 (1 << 18)
-#define OMAP3430_GRPSEL_I2C3 (1 << 17)
-#define OMAP3430_GRPSEL_I2C2 (1 << 16)
-#define OMAP3430_GRPSEL_I2C1 (1 << 15)
-#define OMAP3430_GRPSEL_UART2 (1 << 14)
-#define OMAP3430_GRPSEL_UART1 (1 << 13)
-#define OMAP3430_GRPSEL_GPT11 (1 << 12)
-#define OMAP3430_GRPSEL_GPT10 (1 << 11)
-#define OMAP3430_GRPSEL_MCBSP5 (1 << 10)
-#define OMAP3430_GRPSEL_MCBSP1 (1 << 9)
-#define OMAP3430_GRPSEL_HSOTGUSB (1 << 4)
-#define OMAP3430_GRPSEL_D2D (1 << 3)
+#define OMAP3430_GRPSEL_MMC2_MASK (1 << 25)
+#define OMAP3430_GRPSEL_MMC1_MASK (1 << 24)
+#define OMAP3430_GRPSEL_MCSPI4_MASK (1 << 21)
+#define OMAP3430_GRPSEL_MCSPI3_MASK (1 << 20)
+#define OMAP3430_GRPSEL_MCSPI2_MASK (1 << 19)
+#define OMAP3430_GRPSEL_MCSPI1_MASK (1 << 18)
+#define OMAP3430_GRPSEL_I2C3_MASK (1 << 17)
+#define OMAP3430_GRPSEL_I2C2_MASK (1 << 16)
+#define OMAP3430_GRPSEL_I2C1_MASK (1 << 15)
+#define OMAP3430_GRPSEL_UART2_MASK (1 << 14)
+#define OMAP3430_GRPSEL_UART1_MASK (1 << 13)
+#define OMAP3430_GRPSEL_GPT11_MASK (1 << 12)
+#define OMAP3430_GRPSEL_GPT10_MASK (1 << 11)
+#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10)
+#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9)
+#define OMAP3430_GRPSEL_HSOTGUSB_MASK (1 << 4)
+#define OMAP3430_GRPSEL_D2D_MASK (1 << 3)
/*
* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM,
*/
#define OMAP3430_MEMONSTATE_SHIFT 16
#define OMAP3430_MEMONSTATE_MASK (0x3 << 16)
-#define OMAP3430_MEMRETSTATE (1 << 8)
+#define OMAP3430_MEMRETSTATE_MASK (1 << 8)
/* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
-#define OMAP3430_GRPSEL_GPIO6 (1 << 17)
-#define OMAP3430_GRPSEL_GPIO5 (1 << 16)
-#define OMAP3430_GRPSEL_GPIO4 (1 << 15)
-#define OMAP3430_GRPSEL_GPIO3 (1 << 14)
-#define OMAP3430_GRPSEL_GPIO2 (1 << 13)
-#define OMAP3430_GRPSEL_UART3 (1 << 11)
-#define OMAP3430_GRPSEL_GPT9 (1 << 10)
-#define OMAP3430_GRPSEL_GPT8 (1 << 9)
-#define OMAP3430_GRPSEL_GPT7 (1 << 8)
-#define OMAP3430_GRPSEL_GPT6 (1 << 7)
-#define OMAP3430_GRPSEL_GPT5 (1 << 6)
-#define OMAP3430_GRPSEL_GPT4 (1 << 5)
-#define OMAP3430_GRPSEL_GPT3 (1 << 4)
-#define OMAP3430_GRPSEL_GPT2 (1 << 3)
-#define OMAP3430_GRPSEL_MCBSP4 (1 << 2)
-#define OMAP3430_GRPSEL_MCBSP3 (1 << 1)
-#define OMAP3430_GRPSEL_MCBSP2 (1 << 0)
+#define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17)
+#define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16)
+#define OMAP3430_GRPSEL_GPIO4_MASK (1 << 15)
+#define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14)
+#define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13)
+#define OMAP3430_GRPSEL_UART3_MASK (1 << 11)
+#define OMAP3430_GRPSEL_GPT9_MASK (1 << 10)
+#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9)
+#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8)
+#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7)
+#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6)
+#define OMAP3430_GRPSEL_GPT4_MASK (1 << 5)
+#define OMAP3430_GRPSEL_GPT3_MASK (1 << 4)
+#define OMAP3430_GRPSEL_GPT2_MASK (1 << 3)
+#define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2)
+#define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1)
+#define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0)
/* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */
-#define OMAP3430_GRPSEL_IO (1 << 8)
-#define OMAP3430_GRPSEL_SR2 (1 << 7)
-#define OMAP3430_GRPSEL_SR1 (1 << 6)
-#define OMAP3430_GRPSEL_GPIO1 (1 << 3)
-#define OMAP3430_GRPSEL_GPT12 (1 << 1)
-#define OMAP3430_GRPSEL_GPT1 (1 << 0)
+#define OMAP3430_GRPSEL_IO_MASK (1 << 8)
+#define OMAP3430_GRPSEL_SR2_MASK (1 << 7)
+#define OMAP3430_GRPSEL_SR1_MASK (1 << 6)
+#define OMAP3430_GRPSEL_GPIO1_MASK (1 << 3)
+#define OMAP3430_GRPSEL_GPT12_MASK (1 << 1)
+#define OMAP3430_GRPSEL_GPT1_MASK (1 << 0)
/* Bits specific to each register */
/* RM_RSTCTRL_IVA2 */
-#define OMAP3430_RST3_IVA2 (1 << 2)
-#define OMAP3430_RST2_IVA2 (1 << 1)
-#define OMAP3430_RST1_IVA2 (1 << 0)
+#define OMAP3430_RST3_IVA2_MASK (1 << 2)
+#define OMAP3430_RST2_IVA2_MASK (1 << 1)
+#define OMAP3430_RST1_IVA2_MASK (1 << 0)
/* RM_RSTST_IVA2 specific bits */
-#define OMAP3430_EMULATION_VSEQ_RST (1 << 13)
-#define OMAP3430_EMULATION_VHWA_RST (1 << 12)
-#define OMAP3430_EMULATION_IVA2_RST (1 << 11)
-#define OMAP3430_IVA2_SW_RST3 (1 << 10)
-#define OMAP3430_IVA2_SW_RST2 (1 << 9)
-#define OMAP3430_IVA2_SW_RST1 (1 << 8)
+#define OMAP3430_EMULATION_VSEQ_RST_MASK (1 << 13)
+#define OMAP3430_EMULATION_VHWA_RST_MASK (1 << 12)
+#define OMAP3430_EMULATION_IVA2_RST_MASK (1 << 11)
+#define OMAP3430_IVA2_SW_RST3_MASK (1 << 10)
+#define OMAP3430_IVA2_SW_RST2_MASK (1 << 9)
+#define OMAP3430_IVA2_SW_RST1_MASK (1 << 8)
/* PM_WKDEP_IVA2 specific bits */
#define OMAP3430_L1FLATMEMONSTATE_MASK (0x3 << 18)
#define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT 16
#define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK (0x3 << 16)
-#define OMAP3430_L2FLATMEMRETSTATE (1 << 11)
-#define OMAP3430_SHAREDL2CACHEFLATRETSTATE (1 << 10)
-#define OMAP3430_L1FLATMEMRETSTATE (1 << 9)
-#define OMAP3430_SHAREDL1CACHEFLATRETSTATE (1 << 8)
+#define OMAP3430_L2FLATMEMRETSTATE_MASK (1 << 11)
+#define OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK (1 << 10)
+#define OMAP3430_L1FLATMEMRETSTATE_MASK (1 << 9)
+#define OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK (1 << 8)
/* PM_PWSTST_IVA2 specific bits */
#define OMAP3430_L2FLATMEMSTATEST_SHIFT 10
#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK (0x3 << 4)
/* PRM_IRQSTATUS_IVA2 specific bits */
-#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST (1 << 2)
-#define OMAP3430_FORCEWKUP_ST (1 << 1)
+#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST_MASK (1 << 2)
+#define OMAP3430_FORCEWKUP_ST_MASK (1 << 1)
/* PRM_IRQENABLE_IVA2 specific bits */
-#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN (1 << 2)
-#define OMAP3430_FORCEWKUP_EN (1 << 1)
+#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN_MASK (1 << 2)
+#define OMAP3430_FORCEWKUP_EN_MASK (1 << 1)
/* PRM_REVISION specific bits */
/* PRM_IRQSTATUS_MPU specific bits */
#define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT 25
-#define OMAP3430ES2_SND_PERIPH_DPLL_ST (1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_ST (1 << 24)
-#define OMAP3430_VC_RAERR_ST (1 << 23)
-#define OMAP3430_VC_SAERR_ST (1 << 22)
-#define OMAP3430_VP2_TRANXDONE_ST (1 << 21)
-#define OMAP3430_VP2_EQVALUE_ST (1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_ST (1 << 19)
-#define OMAP3430_VP2_MAXVDD_ST (1 << 18)
-#define OMAP3430_VP2_MINVDD_ST (1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_ST (1 << 16)
-#define OMAP3430_VP1_TRANXDONE_ST (1 << 15)
-#define OMAP3430_VP1_EQVALUE_ST (1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_ST (1 << 13)
-#define OMAP3430_VP1_MAXVDD_ST (1 << 12)
-#define OMAP3430_VP1_MINVDD_ST (1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_ST (1 << 10)
-#define OMAP3430_IO_ST (1 << 9)
-#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST (1 << 8)
+#define OMAP3430ES2_SND_PERIPH_DPLL_ST_MASK (1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_ST_MASK (1 << 24)
+#define OMAP3430_VC_RAERR_ST_MASK (1 << 23)
+#define OMAP3430_VC_SAERR_ST_MASK (1 << 22)
+#define OMAP3430_VP2_TRANXDONE_ST_MASK (1 << 21)
+#define OMAP3430_VP2_EQVALUE_ST_MASK (1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_ST_MASK (1 << 19)
+#define OMAP3430_VP2_MAXVDD_ST_MASK (1 << 18)
+#define OMAP3430_VP2_MINVDD_ST_MASK (1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_ST_MASK (1 << 16)
+#define OMAP3430_VP1_TRANXDONE_ST_MASK (1 << 15)
+#define OMAP3430_VP1_EQVALUE_ST_MASK (1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_ST_MASK (1 << 13)
+#define OMAP3430_VP1_MAXVDD_ST_MASK (1 << 12)
+#define OMAP3430_VP1_MINVDD_ST_MASK (1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_ST_MASK (1 << 10)
+#define OMAP3430_IO_ST_MASK (1 << 9)
+#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_MASK (1 << 8)
#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT 8
-#define OMAP3430_MPU_DPLL_ST (1 << 7)
+#define OMAP3430_MPU_DPLL_ST_MASK (1 << 7)
#define OMAP3430_MPU_DPLL_ST_SHIFT 7
-#define OMAP3430_PERIPH_DPLL_ST (1 << 6)
+#define OMAP3430_PERIPH_DPLL_ST_MASK (1 << 6)
#define OMAP3430_PERIPH_DPLL_ST_SHIFT 6
-#define OMAP3430_CORE_DPLL_ST (1 << 5)
+#define OMAP3430_CORE_DPLL_ST_MASK (1 << 5)
#define OMAP3430_CORE_DPLL_ST_SHIFT 5
-#define OMAP3430_TRANSITION_ST (1 << 4)
-#define OMAP3430_EVGENOFF_ST (1 << 3)
-#define OMAP3430_EVGENON_ST (1 << 2)
-#define OMAP3430_FS_USB_WKUP_ST (1 << 1)
+#define OMAP3430_TRANSITION_ST_MASK (1 << 4)
+#define OMAP3430_EVGENOFF_ST_MASK (1 << 3)
+#define OMAP3430_EVGENON_ST_MASK (1 << 2)
+#define OMAP3430_FS_USB_WKUP_ST_MASK (1 << 1)
/* PRM_IRQENABLE_MPU specific bits */
#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT 25
-#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN (1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_EN (1 << 24)
-#define OMAP3430_VC_RAERR_EN (1 << 23)
-#define OMAP3430_VC_SAERR_EN (1 << 22)
-#define OMAP3430_VP2_TRANXDONE_EN (1 << 21)
-#define OMAP3430_VP2_EQVALUE_EN (1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_EN (1 << 19)
-#define OMAP3430_VP2_MAXVDD_EN (1 << 18)
-#define OMAP3430_VP2_MINVDD_EN (1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_EN (1 << 16)
-#define OMAP3430_VP1_TRANXDONE_EN (1 << 15)
-#define OMAP3430_VP1_EQVALUE_EN (1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_EN (1 << 13)
-#define OMAP3430_VP1_MAXVDD_EN (1 << 12)
-#define OMAP3430_VP1_MINVDD_EN (1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_EN (1 << 10)
-#define OMAP3430_IO_EN (1 << 9)
-#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN (1 << 8)
+#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_MASK (1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_EN_MASK (1 << 24)
+#define OMAP3430_VC_RAERR_EN_MASK (1 << 23)
+#define OMAP3430_VC_SAERR_EN_MASK (1 << 22)
+#define OMAP3430_VP2_TRANXDONE_EN_MASK (1 << 21)
+#define OMAP3430_VP2_EQVALUE_EN_MASK (1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_EN_MASK (1 << 19)
+#define OMAP3430_VP2_MAXVDD_EN_MASK (1 << 18)
+#define OMAP3430_VP2_MINVDD_EN_MASK (1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_EN_MASK (1 << 16)
+#define OMAP3430_VP1_TRANXDONE_EN_MASK (1 << 15)
+#define OMAP3430_VP1_EQVALUE_EN_MASK (1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_EN_MASK (1 << 13)
+#define OMAP3430_VP1_MAXVDD_EN_MASK (1 << 12)
+#define OMAP3430_VP1_MINVDD_EN_MASK (1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_EN_MASK (1 << 10)
+#define OMAP3430_IO_EN_MASK (1 << 9)
+#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_MASK (1 << 8)
#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT 8
-#define OMAP3430_MPU_DPLL_RECAL_EN (1 << 7)
+#define OMAP3430_MPU_DPLL_RECAL_EN_MASK (1 << 7)
#define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT 7
-#define OMAP3430_PERIPH_DPLL_RECAL_EN (1 << 6)
+#define OMAP3430_PERIPH_DPLL_RECAL_EN_MASK (1 << 6)
#define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT 6
-#define OMAP3430_CORE_DPLL_RECAL_EN (1 << 5)
+#define OMAP3430_CORE_DPLL_RECAL_EN_MASK (1 << 5)
#define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT 5
-#define OMAP3430_TRANSITION_EN (1 << 4)
-#define OMAP3430_EVGENOFF_EN (1 << 3)
-#define OMAP3430_EVGENON_EN (1 << 2)
-#define OMAP3430_FS_USB_WKUP_EN (1 << 1)
+#define OMAP3430_TRANSITION_EN_MASK (1 << 4)
+#define OMAP3430_EVGENOFF_EN_MASK (1 << 3)
+#define OMAP3430_EVGENON_EN_MASK (1 << 2)
+#define OMAP3430_FS_USB_WKUP_EN_MASK (1 << 1)
/* RM_RSTST_MPU specific bits */
-#define OMAP3430_EMULATION_MPU_RST (1 << 11)
+#define OMAP3430_EMULATION_MPU_RST_MASK (1 << 11)
/* PM_WKDEP_MPU specific bits */
#define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT 5
#define OMAP3430_OFFLOADMODE_MASK (0x3 << 3)
#define OMAP3430_ONLOADMODE_SHIFT 1
#define OMAP3430_ONLOADMODE_MASK (0x3 << 1)
-#define OMAP3430_ENABLE (1 << 0)
+#define OMAP3430_ENABLE_MASK (1 << 0)
/* PM_EVGENONTIM_MPU */
#define OMAP3430_ONTIMEVAL_SHIFT 0
/* PM_PWSTCTRL_MPU specific bits */
#define OMAP3430_L2CACHEONSTATE_SHIFT 16
#define OMAP3430_L2CACHEONSTATE_MASK (0x3 << 16)
-#define OMAP3430_L2CACHERETSTATE (1 << 8)
-#define OMAP3430_LOGICL1CACHERETSTATE (1 << 2)
+#define OMAP3430_L2CACHERETSTATE_MASK (1 << 8)
+#define OMAP3430_LOGICL1CACHERETSTATE_MASK (1 << 2)
/* PM_PWSTST_MPU specific bits */
#define OMAP3430_L2CACHESTATEST_SHIFT 6
#define OMAP3430_L2CACHESTATEST_MASK (0x3 << 6)
-#define OMAP3430_LOGICL1CACHESTATEST (1 << 2)
+#define OMAP3430_LOGICL1CACHESTATEST_MASK (1 << 2)
/* PM_PREPWSTST_MPU specific bits */
#define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT 6
#define OMAP3430_LASTL2CACHESTATEENTERED_MASK (0x3 << 6)
-#define OMAP3430_LASTLOGICL1CACHESTATEENTERED (1 << 2)
+#define OMAP3430_LASTLOGICL1CACHESTATEENTERED_MASK (1 << 2)
/* RM_RSTCTRL_CORE */
-#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON (1 << 1)
-#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST (1 << 0)
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK (1 << 1)
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK (1 << 0)
/* RM_RSTST_CORE specific bits */
-#define OMAP3430_MODEM_SECURITY_VIOL_RST (1 << 10)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON (1 << 9)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST (1 << 8)
+#define OMAP3430_MODEM_SECURITY_VIOL_RST_MASK (1 << 10)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON_MASK (1 << 9)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST_MASK (1 << 8)
/* PM_WKEN1_CORE specific bits */
/* PM_MPUGRPSEL1_CORE specific bits */
-#define OMAP3430_GRPSEL_FSHOSTUSB (1 << 5)
+#define OMAP3430_GRPSEL_FSHOSTUSB_MASK (1 << 5)
/* PM_IVA2GRPSEL1_CORE specific bits */
#define OMAP3430_MEM2ONSTATE_MASK (0x3 << 18)
#define OMAP3430_MEM1ONSTATE_SHIFT 16
#define OMAP3430_MEM1ONSTATE_MASK (0x3 << 16)
-#define OMAP3430_MEM2RETSTATE (1 << 9)
-#define OMAP3430_MEM1RETSTATE (1 << 8)
+#define OMAP3430_MEM2RETSTATE_MASK (1 << 9)
+#define OMAP3430_MEM1RETSTATE_MASK (1 << 8)
/* PM_PWSTST_CORE specific bits */
#define OMAP3430_MEM2STATEST_SHIFT 6
/* RM_RSTST_GFX specific bits */
/* PM_WKDEP_GFX specific bits */
-#define OMAP3430_PM_WKDEP_GFX_EN_IVA2 (1 << 2)
+#define OMAP3430_PM_WKDEP_GFX_EN_IVA2_MASK (1 << 2)
/* PM_PWSTCTRL_GFX specific bits */
/* PM_PREPWSTST_GFX specific bits */
/* PM_WKEN_WKUP specific bits */
-#define OMAP3430_EN_IO_CHAIN (1 << 16)
-#define OMAP3430_EN_IO (1 << 8)
-#define OMAP3430_EN_GPIO1 (1 << 3)
+#define OMAP3430_EN_IO_CHAIN_MASK (1 << 16)
+#define OMAP3430_EN_IO_MASK (1 << 8)
+#define OMAP3430_EN_GPIO1_MASK (1 << 3)
/* PM_MPUGRPSEL_WKUP specific bits */
/* PM_IVA2GRPSEL_WKUP specific bits */
/* PM_WKST_WKUP specific bits */
-#define OMAP3430_ST_IO_CHAIN (1 << 16)
-#define OMAP3430_ST_IO (1 << 8)
+#define OMAP3430_ST_IO_CHAIN_MASK (1 << 16)
+#define OMAP3430_ST_IO_MASK (1 << 8)
/* PRM_CLKSEL */
#define OMAP3430_SYS_CLKIN_SEL_SHIFT 0
#define OMAP3430_SYS_CLKIN_SEL_MASK (0x7 << 0)
/* PRM_CLKOUT_CTRL */
-#define OMAP3430_CLKOUT_EN (1 << 7)
+#define OMAP3430_CLKOUT_EN_MASK (1 << 7)
#define OMAP3430_CLKOUT_EN_SHIFT 7
/* RM_RSTST_DSS specific bits */
/* PM_WKEN_DSS */
-#define OMAP3430_PM_WKEN_DSS_EN_DSS (1 << 0)
+#define OMAP3430_PM_WKEN_DSS_EN_DSS_MASK (1 << 0)
/* PM_WKDEP_DSS specific bits */
-#define OMAP3430_PM_WKDEP_DSS_EN_IVA2 (1 << 2)
+#define OMAP3430_PM_WKDEP_DSS_EN_IVA2_MASK (1 << 2)
/* PM_PWSTCTRL_DSS specific bits */
/* RM_RSTST_CAM specific bits */
/* PM_WKDEP_CAM specific bits */
-#define OMAP3430_PM_WKDEP_CAM_EN_IVA2 (1 << 2)
+#define OMAP3430_PM_WKDEP_CAM_EN_IVA2_MASK (1 << 2)
/* PM_PWSTCTRL_CAM specific bits */
/* PM_WKST_PER specific bits */
/* PM_WKDEP_PER specific bits */
-#define OMAP3430_PM_WKDEP_PER_EN_IVA2 (1 << 2)
+#define OMAP3430_PM_WKDEP_PER_EN_IVA2_MASK (1 << 2)
/* PM_PWSTCTRL_PER specific bits */
/* PRM_VC_CMD_VAL_1 specific bits */
/* PRM_VC_CH_CONF */
-#define OMAP3430_CMD1 (1 << 20)
-#define OMAP3430_RACEN1 (1 << 19)
-#define OMAP3430_RAC1 (1 << 18)
-#define OMAP3430_RAV1 (1 << 17)
-#define OMAP3430_PRM_VC_CH_CONF_SA1 (1 << 16)
-#define OMAP3430_CMD0 (1 << 4)
-#define OMAP3430_RACEN0 (1 << 3)
-#define OMAP3430_RAC0 (1 << 2)
-#define OMAP3430_RAV0 (1 << 1)
-#define OMAP3430_PRM_VC_CH_CONF_SA0 (1 << 0)
+#define OMAP3430_CMD1_MASK (1 << 20)
+#define OMAP3430_RACEN1_MASK (1 << 19)
+#define OMAP3430_RAC1_MASK (1 << 18)
+#define OMAP3430_RAV1_MASK (1 << 17)
+#define OMAP3430_PRM_VC_CH_CONF_SA1_MASK (1 << 16)
+#define OMAP3430_CMD0_MASK (1 << 4)
+#define OMAP3430_RACEN0_MASK (1 << 3)
+#define OMAP3430_RAC0_MASK (1 << 2)
+#define OMAP3430_RAV0_MASK (1 << 1)
+#define OMAP3430_PRM_VC_CH_CONF_SA0_MASK (1 << 0)
/* PRM_VC_I2C_CFG */
-#define OMAP3430_HSMASTER (1 << 5)
-#define OMAP3430_SREN (1 << 4)
-#define OMAP3430_HSEN (1 << 3)
+#define OMAP3430_HSMASTER_MASK (1 << 5)
+#define OMAP3430_SREN_MASK (1 << 4)
+#define OMAP3430_HSEN_MASK (1 << 3)
#define OMAP3430_MCODE_SHIFT 0
#define OMAP3430_MCODE_MASK (0x7 << 0)
/* PRM_VC_BYPASS_VAL */
-#define OMAP3430_VALID (1 << 24)
+#define OMAP3430_VALID_MASK (1 << 24)
#define OMAP3430_DATA_SHIFT 16
#define OMAP3430_DATA_MASK (0xff << 16)
#define OMAP3430_REGADDR_SHIFT 8
#define OMAP3430_SLAVEADDR_MASK (0x7f << 0)
/* PRM_RSTCTRL */
-#define OMAP3430_RST_DPLL3 (1 << 2)
-#define OMAP3430_RST_GS (1 << 1)
+#define OMAP3430_RST_DPLL3_MASK (1 << 2)
+#define OMAP3430_RST_GS_MASK (1 << 1)
/* PRM_RSTTIME */
#define OMAP3430_RSTTIME2_SHIFT 8
#define OMAP3430_RSTTIME1_MASK (0xff << 0)
/* PRM_RSTST */
-#define OMAP3430_ICECRUSHER_RST (1 << 10)
-#define OMAP3430_ICEPICK_RST (1 << 9)
-#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST (1 << 8)
-#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST (1 << 7)
-#define OMAP3430_EXTERNAL_WARM_RST (1 << 6)
-#define OMAP3430_SECURE_WD_RST (1 << 5)
-#define OMAP3430_MPU_WD_RST (1 << 4)
-#define OMAP3430_SECURITY_VIOL_RST (1 << 3)
-#define OMAP3430_GLOBAL_SW_RST (1 << 1)
-#define OMAP3430_GLOBAL_COLD_RST (1 << 0)
+#define OMAP3430_ICECRUSHER_RST_MASK (1 << 10)
+#define OMAP3430_ICEPICK_RST_MASK (1 << 9)
+#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK (1 << 8)
+#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK (1 << 7)
+#define OMAP3430_EXTERNAL_WARM_RST_MASK (1 << 6)
+#define OMAP3430_SECURE_WD_RST_MASK (1 << 5)
+#define OMAP3430_MPU_WD_RST_MASK (1 << 4)
+#define OMAP3430_SECURITY_VIOL_RST_MASK (1 << 3)
+#define OMAP3430_GLOBAL_SW_RST_MASK (1 << 1)
+#define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0)
/* PRM_VOLTCTRL */
-#define OMAP3430_SEL_VMODE (1 << 4)
-#define OMAP3430_SEL_OFF (1 << 3)
-#define OMAP3430_AUTO_OFF (1 << 2)
-#define OMAP3430_AUTO_RET (1 << 1)
-#define OMAP3430_AUTO_SLEEP (1 << 0)
+#define OMAP3430_SEL_VMODE_MASK (1 << 4)
+#define OMAP3430_SEL_OFF_MASK (1 << 3)
+#define OMAP3430_AUTO_OFF_MASK (1 << 2)
+#define OMAP3430_AUTO_RET_MASK (1 << 1)
+#define OMAP3430_AUTO_SLEEP_MASK (1 << 0)
/* PRM_SRAM_PCHARGE */
#define OMAP3430_PCHARGE_TIME_SHIFT 0
#define OMAP3430_SETUP_TIME_MASK (0xffff << 0)
/* PRM_POLCTRL */
-#define OMAP3430_OFFMODE_POL (1 << 3)
-#define OMAP3430_CLKOUT_POL (1 << 2)
-#define OMAP3430_CLKREQ_POL (1 << 1)
-#define OMAP3430_EXTVOL_POL (1 << 0)
+#define OMAP3430_OFFMODE_POL_MASK (1 << 3)
+#define OMAP3430_CLKOUT_POL_MASK (1 << 2)
+#define OMAP3430_CLKREQ_POL_MASK (1 << 1)
+#define OMAP3430_EXTVOL_POL_MASK (1 << 0)
/* PRM_VOLTSETUP2 */
#define OMAP3430_OFFMODESETUPTIME_SHIFT 0
OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
#define OMAP44XX_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
-#define OMAP44XX_CHIRONSS_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
+#define OMAP44XX_PRCM_MPU_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE + (module) + (reg))
#include "prm44xx.h"
#define OMAP_OFFLOADMODE_MASK (0x3 << 3)
#define OMAP_ONLOADMODE_SHIFT 1
#define OMAP_ONLOADMODE_MASK (0x3 << 1)
-#define OMAP_ENABLE (1 << 0)
+#define OMAP_ENABLE_MASK (1 << 0)
/* PRM_RSTTIME */
/* Named RM_RSTTIME_WKUP on the 24xx */
/* PRM_RSTCTRL */
/* Named RM_RSTCTRL_WKUP on the 24xx */
/* 2420 calls RST_DPLL3 'RST_DPLL' */
-#define OMAP_RST_DPLL3 (1 << 2)
-#define OMAP_RST_GS (1 << 1)
+#define OMAP_RST_DPLL3_MASK (1 << 2)
+#define OMAP_RST_GS_MASK (1 << 1)
/*
* PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
* PM_PWSTST_NEON
*/
-#define OMAP_INTRANSITION (1 << 20)
+#define OMAP_INTRANSITION_MASK (1 << 20)
/*
* 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
* RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
*/
-#define OMAP_COREDOMAINWKUP_RST (1 << 3)
+#define OMAP_COREDOMAINWKUP_RST_MASK (1 << 3)
/*
* 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
*
* 3430: RM_RSTST_CORE, RM_RSTST_EMU
*/
-#define OMAP_DOMAINWKUP_RST (1 << 2)
+#define OMAP_DOMAINWKUP_RST_MASK (1 << 2)
/*
* 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
*
* 3430: RM_RSTST_CORE, RM_RSTST_EMU
*/
-#define OMAP_GLOBALWARM_RST (1 << 1)
-#define OMAP_GLOBALCOLD_RST (1 << 0)
+#define OMAP_GLOBALWARM_RST_MASK (1 << 1)
+#define OMAP_GLOBALCOLD_RST_MASK (1 << 0)
/*
* 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
* PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
* PM_PWSTCTRL_NEON
*/
-#define OMAP_LOGICRETSTATE (1 << 2)
+#define OMAP_LOGICRETSTATE_MASK (1 << 2)
/*
* 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
/*
* OMAP44xx PRM instance offset macros
*
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
*
* Paul Walmsley (paul@pwsan.com)
* Rajendra Nayak (rnayak@ti.com)
/* PRM */
-
/* PRM.OCP_SOCKET_PRM register offsets */
+#define OMAP4_REVISION_PRM_OFFSET 0x0000
#define OMAP4430_REVISION_PRM OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4_PRM_IRQSTATUS_MPU_OFFSET 0x0010
#define OMAP4430_PRM_IRQSTATUS_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0010)
+#define OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET 0x0014
#define OMAP4430_PRM_IRQSTATUS_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0014)
+#define OMAP4_PRM_IRQENABLE_MPU_OFFSET 0x0018
#define OMAP4430_PRM_IRQENABLE_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0018)
+#define OMAP4_PRM_IRQENABLE_MPU_2_OFFSET 0x001c
#define OMAP4430_PRM_IRQENABLE_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x001c)
+#define OMAP4_PRM_IRQSTATUS_DUCATI_OFFSET 0x0020
#define OMAP4430_PRM_IRQSTATUS_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0020)
+#define OMAP4_PRM_IRQENABLE_DUCATI_OFFSET 0x0028
#define OMAP4430_PRM_IRQENABLE_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0028)
+#define OMAP4_PRM_IRQSTATUS_TESLA_OFFSET 0x0030
#define OMAP4430_PRM_IRQSTATUS_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030)
+#define OMAP4_PRM_IRQENABLE_TESLA_OFFSET 0x0038
#define OMAP4430_PRM_IRQENABLE_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038)
+#define OMAP4_PRM_PRM_PROFILING_CLKCTRL_OFFSET 0x0040
#define OMAP4430_PRM_PRM_PROFILING_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040)
/* PRM.CKGEN_PRM register offsets */
+#define OMAP4_CM_ABE_DSS_SYS_CLKSEL_OFFSET 0x0000
#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000)
+#define OMAP4_CM_DPLL_SYS_REF_CLKSEL_OFFSET 0x0004
#define OMAP4430_CM_DPLL_SYS_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004)
+#define OMAP4_CM_L4_WKUP_CLKSEL_OFFSET 0x0008
#define OMAP4430_CM_L4_WKUP_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008)
+#define OMAP4_CM_ABE_PLL_REF_CLKSEL_OFFSET 0x000c
#define OMAP4430_CM_ABE_PLL_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x000c)
+#define OMAP4_CM_SYS_CLKSEL_OFFSET 0x0010
#define OMAP4430_CM_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0010)
/* PRM.MPU_PRM register offsets */
+#define OMAP4_PM_MPU_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_MPU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0000)
+#define OMAP4_PM_MPU_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_MPU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0004)
+#define OMAP4_RM_MPU_RSTST_OFFSET 0x0014
#define OMAP4430_RM_MPU_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0014)
+#define OMAP4_RM_MPU_MPU_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_MPU_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0024)
/* PRM.TESLA_PRM register offsets */
+#define OMAP4_PM_TESLA_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_TESLA_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0000)
+#define OMAP4_PM_TESLA_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_TESLA_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0004)
+#define OMAP4_RM_TESLA_RSTCTRL_OFFSET 0x0010
#define OMAP4430_RM_TESLA_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0010)
+#define OMAP4_RM_TESLA_RSTST_OFFSET 0x0014
#define OMAP4430_RM_TESLA_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0014)
+#define OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_TESLA_TESLA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0024)
/* PRM.ABE_PRM register offsets */
+#define OMAP4_PM_ABE_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_ABE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0000)
+#define OMAP4_PM_ABE_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_ABE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0004)
+#define OMAP4_RM_ABE_AESS_CONTEXT_OFFSET 0x002c
#define OMAP4430_RM_ABE_AESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x002c)
+#define OMAP4_PM_ABE_PDM_WKDEP_OFFSET 0x0030
#define OMAP4430_PM_ABE_PDM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0030)
+#define OMAP4_RM_ABE_PDM_CONTEXT_OFFSET 0x0034
#define OMAP4430_RM_ABE_PDM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0034)
+#define OMAP4_PM_ABE_DMIC_WKDEP_OFFSET 0x0038
#define OMAP4430_PM_ABE_DMIC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0038)
+#define OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET 0x003c
#define OMAP4430_RM_ABE_DMIC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x003c)
+#define OMAP4_PM_ABE_MCASP_WKDEP_OFFSET 0x0040
#define OMAP4430_PM_ABE_MCASP_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0040)
+#define OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET 0x0044
#define OMAP4430_RM_ABE_MCASP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0044)
+#define OMAP4_PM_ABE_MCBSP1_WKDEP_OFFSET 0x0048
#define OMAP4430_PM_ABE_MCBSP1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0048)
+#define OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET 0x004c
#define OMAP4430_RM_ABE_MCBSP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x004c)
+#define OMAP4_PM_ABE_MCBSP2_WKDEP_OFFSET 0x0050
#define OMAP4430_PM_ABE_MCBSP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0050)
+#define OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET 0x0054
#define OMAP4430_RM_ABE_MCBSP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0054)
+#define OMAP4_PM_ABE_MCBSP3_WKDEP_OFFSET 0x0058
#define OMAP4430_PM_ABE_MCBSP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0058)
+#define OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET 0x005c
#define OMAP4430_RM_ABE_MCBSP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x005c)
+#define OMAP4_PM_ABE_SLIMBUS_WKDEP_OFFSET 0x0060
#define OMAP4430_PM_ABE_SLIMBUS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0060)
+#define OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET 0x0064
#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0064)
+#define OMAP4_PM_ABE_TIMER5_WKDEP_OFFSET 0x0068
#define OMAP4430_PM_ABE_TIMER5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0068)
+#define OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET 0x006c
#define OMAP4430_RM_ABE_TIMER5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x006c)
+#define OMAP4_PM_ABE_TIMER6_WKDEP_OFFSET 0x0070
#define OMAP4430_PM_ABE_TIMER6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0070)
+#define OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET 0x0074
#define OMAP4430_RM_ABE_TIMER6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0074)
+#define OMAP4_PM_ABE_TIMER7_WKDEP_OFFSET 0x0078
#define OMAP4430_PM_ABE_TIMER7_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0078)
+#define OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET 0x007c
#define OMAP4430_RM_ABE_TIMER7_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x007c)
+#define OMAP4_PM_ABE_TIMER8_WKDEP_OFFSET 0x0080
#define OMAP4430_PM_ABE_TIMER8_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0080)
+#define OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET 0x0084
#define OMAP4430_RM_ABE_TIMER8_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0084)
+#define OMAP4_PM_ABE_WDT3_WKDEP_OFFSET 0x0088
#define OMAP4430_PM_ABE_WDT3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0088)
+#define OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET 0x008c
#define OMAP4430_RM_ABE_WDT3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x008c)
/* PRM.ALWAYS_ON_PRM register offsets */
+#define OMAP4_RM_ALWON_MDMINTC_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0024)
+#define OMAP4_PM_ALWON_SR_MPU_WKDEP_OFFSET 0x0028
#define OMAP4430_PM_ALWON_SR_MPU_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET 0x002c
#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x002c)
+#define OMAP4_PM_ALWON_SR_IVA_WKDEP_OFFSET 0x0030
#define OMAP4430_PM_ALWON_SR_IVA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET 0x0034
#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0034)
+#define OMAP4_PM_ALWON_SR_CORE_WKDEP_OFFSET 0x0038
#define OMAP4430_PM_ALWON_SR_CORE_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0038)
+#define OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET 0x003c
#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x003c)
/* PRM.CORE_PRM register offsets */
+#define OMAP4_PM_CORE_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_CORE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0000)
+#define OMAP4_PM_CORE_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_CORE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0004)
+#define OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_L3_1_L3_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0024)
+#define OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET 0x0124
#define OMAP4430_RM_L3_2_L3_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0124)
+#define OMAP4_RM_L3_2_GPMC_CONTEXT_OFFSET 0x012c
#define OMAP4430_RM_L3_2_GPMC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x012c)
+#define OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET 0x0134
#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0134)
+#define OMAP4_RM_DUCATI_RSTCTRL_OFFSET 0x0210
#define OMAP4430_RM_DUCATI_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0210)
+#define OMAP4_RM_DUCATI_RSTST_OFFSET 0x0214
#define OMAP4430_RM_DUCATI_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0214)
+#define OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET 0x0224
#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0224)
+#define OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET 0x0324
#define OMAP4430_RM_SDMA_SDMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0324)
+#define OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET 0x0424
#define OMAP4430_RM_MEMIF_DMM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0424)
+#define OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET 0x042c
#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x042c)
+#define OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET 0x0434
#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0434)
+#define OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET 0x043c
#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x043c)
+#define OMAP4_RM_MEMIF_DLL_CONTEXT_OFFSET 0x0444
#define OMAP4430_RM_MEMIF_DLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0444)
+#define OMAP4_RM_MEMIF_EMIF_H1_CONTEXT_OFFSET 0x0454
#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0454)
+#define OMAP4_RM_MEMIF_EMIF_H2_CONTEXT_OFFSET 0x045c
#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x045c)
+#define OMAP4_RM_MEMIF_DLL_H_CONTEXT_OFFSET 0x0464
#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0464)
+#define OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET 0x0524
#define OMAP4430_RM_D2D_SAD2D_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0524)
+#define OMAP4_RM_D2D_MODEM_ICR_CONTEXT_OFFSET 0x052c
#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x052c)
+#define OMAP4_RM_D2D_SAD2D_FW_CONTEXT_OFFSET 0x0534
#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0534)
+#define OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET 0x0624
#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0624)
+#define OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET 0x062c
#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x062c)
+#define OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET 0x0634
#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0634)
+#define OMAP4_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET 0x063c
#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x063c)
+#define OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET 0x0724
#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0724)
+#define OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET 0x072c
#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x072c)
+#define OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET 0x0744
#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0744)
/* PRM.IVAHD_PRM register offsets */
+#define OMAP4_PM_IVAHD_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_IVAHD_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0000)
+#define OMAP4_PM_IVAHD_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_IVAHD_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0004)
+#define OMAP4_RM_IVAHD_RSTCTRL_OFFSET 0x0010
#define OMAP4430_RM_IVAHD_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0010)
+#define OMAP4_RM_IVAHD_RSTST_OFFSET 0x0014
#define OMAP4430_RM_IVAHD_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0014)
+#define OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0024)
+#define OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET 0x002c
#define OMAP4430_RM_IVAHD_SL2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x002c)
/* PRM.CAM_PRM register offsets */
+#define OMAP4_PM_CAM_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_CAM_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0000)
+#define OMAP4_PM_CAM_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_CAM_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0004)
+#define OMAP4_RM_CAM_ISS_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_CAM_ISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0024)
+#define OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET 0x002c
#define OMAP4430_RM_CAM_FDIF_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x002c)
/* PRM.DSS_PRM register offsets */
+#define OMAP4_PM_DSS_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_DSS_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0000)
+#define OMAP4_PM_DSS_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_DSS_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0004)
+#define OMAP4_PM_DSS_DSS_WKDEP_OFFSET 0x0020
#define OMAP4430_PM_DSS_DSS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0020)
+#define OMAP4_RM_DSS_DSS_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_DSS_DSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0024)
+#define OMAP4_RM_DSS_DEISS_CONTEXT_OFFSET 0x002c
#define OMAP4430_RM_DSS_DEISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x002c)
/* PRM.GFX_PRM register offsets */
+#define OMAP4_PM_GFX_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_GFX_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0000)
+#define OMAP4_PM_GFX_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_GFX_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0004)
+#define OMAP4_RM_GFX_GFX_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_GFX_GFX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0024)
/* PRM.L3INIT_PRM register offsets */
+#define OMAP4_PM_L3INIT_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_L3INIT_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0000)
+#define OMAP4_PM_L3INIT_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_L3INIT_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0004)
+#define OMAP4_PM_L3INIT_MMC1_WKDEP_OFFSET 0x0028
#define OMAP4430_PM_L3INIT_MMC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0028)
+#define OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET 0x002c
#define OMAP4430_RM_L3INIT_MMC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x002c)
+#define OMAP4_PM_L3INIT_MMC2_WKDEP_OFFSET 0x0030
#define OMAP4430_PM_L3INIT_MMC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0030)
+#define OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET 0x0034
#define OMAP4430_RM_L3INIT_MMC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0034)
+#define OMAP4_PM_L3INIT_HSI_WKDEP_OFFSET 0x0038
#define OMAP4430_PM_L3INIT_HSI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0038)
+#define OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET 0x003c
#define OMAP4430_RM_L3INIT_HSI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x003c)
+#define OMAP4_PM_L3INIT_UNIPRO1_WKDEP_OFFSET 0x0040
#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0040)
+#define OMAP4_RM_L3INIT_UNIPRO1_CONTEXT_OFFSET 0x0044
#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0044)
+#define OMAP4_PM_L3INIT_USB_HOST_WKDEP_OFFSET 0x0058
#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0058)
+#define OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET 0x005c
#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x005c)
+#define OMAP4_PM_L3INIT_USB_OTG_WKDEP_OFFSET 0x0060
#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0060)
+#define OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET 0x0064
#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0064)
+#define OMAP4_PM_L3INIT_USB_TLL_WKDEP_OFFSET 0x0068
#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0068)
+#define OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET 0x006c
#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x006c)
+#define OMAP4_RM_L3INIT_P1500_CONTEXT_OFFSET 0x007c
#define OMAP4430_RM_L3INIT_P1500_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x007c)
+#define OMAP4_RM_L3INIT_EMAC_CONTEXT_OFFSET 0x0084
#define OMAP4430_RM_L3INIT_EMAC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0084)
+#define OMAP4_PM_L3INIT_SATA_WKDEP_OFFSET 0x0088
#define OMAP4430_PM_L3INIT_SATA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0088)
+#define OMAP4_RM_L3INIT_SATA_CONTEXT_OFFSET 0x008c
#define OMAP4430_RM_L3INIT_SATA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x008c)
+#define OMAP4_RM_L3INIT_TPPSS_CONTEXT_OFFSET 0x0094
#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0094)
+#define OMAP4_PM_L3INIT_PCIESS_WKDEP_OFFSET 0x0098
#define OMAP4430_PM_L3INIT_PCIESS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0098)
+#define OMAP4_RM_L3INIT_PCIESS_CONTEXT_OFFSET 0x009c
#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x009c)
+#define OMAP4_RM_L3INIT_CCPTX_CONTEXT_OFFSET 0x00ac
#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00ac)
+#define OMAP4_PM_L3INIT_XHPI_WKDEP_OFFSET 0x00c0
#define OMAP4430_PM_L3INIT_XHPI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c0)
+#define OMAP4_RM_L3INIT_XHPI_CONTEXT_OFFSET 0x00c4
#define OMAP4430_RM_L3INIT_XHPI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c4)
+#define OMAP4_PM_L3INIT_MMC6_WKDEP_OFFSET 0x00c8
#define OMAP4430_PM_L3INIT_MMC6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c8)
+#define OMAP4_RM_L3INIT_MMC6_CONTEXT_OFFSET 0x00cc
#define OMAP4430_RM_L3INIT_MMC6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00cc)
+#define OMAP4_PM_L3INIT_USB_HOST_FS_WKDEP_OFFSET 0x00d0
#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d0)
+#define OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET 0x00d4
#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d4)
+#define OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET 0x00e4
#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00e4)
/* PRM.L4PER_PRM register offsets */
+#define OMAP4_PM_L4PER_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_L4PER_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0000)
+#define OMAP4_PM_L4PER_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_L4PER_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0004)
+#define OMAP4_RM_L4PER_ADC_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_L4PER_ADC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0024)
+#define OMAP4_PM_L4PER_DMTIMER10_WKDEP_OFFSET 0x0028
#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0028)
+#define OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET 0x002c
#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x002c)
+#define OMAP4_PM_L4PER_DMTIMER11_WKDEP_OFFSET 0x0030
#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0030)
+#define OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET 0x0034
#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0034)
+#define OMAP4_PM_L4PER_DMTIMER2_WKDEP_OFFSET 0x0038
#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0038)
+#define OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET 0x003c
#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x003c)
+#define OMAP4_PM_L4PER_DMTIMER3_WKDEP_OFFSET 0x0040
#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0040)
+#define OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET 0x0044
#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0044)
+#define OMAP4_PM_L4PER_DMTIMER4_WKDEP_OFFSET 0x0048
#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0048)
+#define OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET 0x004c
#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x004c)
+#define OMAP4_PM_L4PER_DMTIMER9_WKDEP_OFFSET 0x0050
#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0050)
+#define OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET 0x0054
#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0054)
+#define OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET 0x005c
#define OMAP4430_RM_L4PER_ELM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x005c)
+#define OMAP4_PM_L4PER_GPIO2_WKDEP_OFFSET 0x0060
#define OMAP4430_PM_L4PER_GPIO2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0060)
+#define OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET 0x0064
#define OMAP4430_RM_L4PER_GPIO2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0064)
+#define OMAP4_PM_L4PER_GPIO3_WKDEP_OFFSET 0x0068
#define OMAP4430_PM_L4PER_GPIO3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0068)
+#define OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET 0x006c
#define OMAP4430_RM_L4PER_GPIO3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x006c)
+#define OMAP4_PM_L4PER_GPIO4_WKDEP_OFFSET 0x0070
#define OMAP4430_PM_L4PER_GPIO4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0070)
+#define OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET 0x0074
#define OMAP4430_RM_L4PER_GPIO4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0074)
+#define OMAP4_PM_L4PER_GPIO5_WKDEP_OFFSET 0x0078
#define OMAP4430_PM_L4PER_GPIO5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0078)
+#define OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET 0x007c
#define OMAP4430_RM_L4PER_GPIO5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x007c)
+#define OMAP4_PM_L4PER_GPIO6_WKDEP_OFFSET 0x0080
#define OMAP4430_PM_L4PER_GPIO6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0080)
+#define OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET 0x0084
#define OMAP4430_RM_L4PER_GPIO6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0084)
+#define OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET 0x008c
#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x008c)
+#define OMAP4_PM_L4PER_HECC1_WKDEP_OFFSET 0x0090
#define OMAP4430_PM_L4PER_HECC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0090)
+#define OMAP4_RM_L4PER_HECC1_CONTEXT_OFFSET 0x0094
#define OMAP4430_RM_L4PER_HECC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0094)
+#define OMAP4_PM_L4PER_HECC2_WKDEP_OFFSET 0x0098
#define OMAP4430_PM_L4PER_HECC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0098)
+#define OMAP4_RM_L4PER_HECC2_CONTEXT_OFFSET 0x009c
#define OMAP4430_RM_L4PER_HECC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x009c)
+#define OMAP4_PM_L4PER_I2C1_WKDEP_OFFSET 0x00a0
#define OMAP4430_PM_L4PER_I2C1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a0)
+#define OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET 0x00a4
#define OMAP4430_RM_L4PER_I2C1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a4)
+#define OMAP4_PM_L4PER_I2C2_WKDEP_OFFSET 0x00a8
#define OMAP4430_PM_L4PER_I2C2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a8)
+#define OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET 0x00ac
#define OMAP4430_RM_L4PER_I2C2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ac)
+#define OMAP4_PM_L4PER_I2C3_WKDEP_OFFSET 0x00b0
#define OMAP4430_PM_L4PER_I2C3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b0)
+#define OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET 0x00b4
#define OMAP4430_RM_L4PER_I2C3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b4)
+#define OMAP4_PM_L4PER_I2C4_WKDEP_OFFSET 0x00b8
#define OMAP4430_PM_L4PER_I2C4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b8)
+#define OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET 0x00bc
#define OMAP4430_RM_L4PER_I2C4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00bc)
+#define OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET 0x00c0
#define OMAP4430_RM_L4PER_L4_PER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00c0)
+#define OMAP4_PM_L4PER_MCASP2_WKDEP_OFFSET 0x00d0
#define OMAP4430_PM_L4PER_MCASP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d0)
+#define OMAP4_RM_L4PER_MCASP2_CONTEXT_OFFSET 0x00d4
#define OMAP4430_RM_L4PER_MCASP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d4)
+#define OMAP4_PM_L4PER_MCASP3_WKDEP_OFFSET 0x00d8
#define OMAP4430_PM_L4PER_MCASP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d8)
+#define OMAP4_RM_L4PER_MCASP3_CONTEXT_OFFSET 0x00dc
#define OMAP4430_RM_L4PER_MCASP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00dc)
+#define OMAP4_PM_L4PER_MCBSP4_WKDEP_OFFSET 0x00e0
#define OMAP4430_PM_L4PER_MCBSP4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e0)
+#define OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET 0x00e4
#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e4)
+#define OMAP4_RM_L4PER_MGATE_CONTEXT_OFFSET 0x00ec
#define OMAP4430_RM_L4PER_MGATE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ec)
+#define OMAP4_PM_L4PER_MCSPI1_WKDEP_OFFSET 0x00f0
#define OMAP4430_PM_L4PER_MCSPI1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f0)
+#define OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET 0x00f4
#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f4)
+#define OMAP4_PM_L4PER_MCSPI2_WKDEP_OFFSET 0x00f8
#define OMAP4430_PM_L4PER_MCSPI2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f8)
+#define OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET 0x00fc
#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00fc)
+#define OMAP4_PM_L4PER_MCSPI3_WKDEP_OFFSET 0x0100
#define OMAP4430_PM_L4PER_MCSPI3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0100)
+#define OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET 0x0104
#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0104)
+#define OMAP4_PM_L4PER_MCSPI4_WKDEP_OFFSET 0x0108
#define OMAP4430_PM_L4PER_MCSPI4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0108)
+#define OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET 0x010c
#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x010c)
+#define OMAP4_PM_L4PER_MMCSD3_WKDEP_OFFSET 0x0120
#define OMAP4430_PM_L4PER_MMCSD3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0120)
+#define OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET 0x0124
#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0124)
+#define OMAP4_PM_L4PER_MMCSD4_WKDEP_OFFSET 0x0128
#define OMAP4430_PM_L4PER_MMCSD4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0128)
+#define OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET 0x012c
#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x012c)
+#define OMAP4_RM_L4PER_MSPROHG_CONTEXT_OFFSET 0x0134
#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0134)
+#define OMAP4_PM_L4PER_SLIMBUS2_WKDEP_OFFSET 0x0138
#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0138)
+#define OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET 0x013c
#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x013c)
+#define OMAP4_PM_L4PER_UART1_WKDEP_OFFSET 0x0140
#define OMAP4430_PM_L4PER_UART1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0140)
+#define OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET 0x0144
#define OMAP4430_RM_L4PER_UART1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0144)
+#define OMAP4_PM_L4PER_UART2_WKDEP_OFFSET 0x0148
#define OMAP4430_PM_L4PER_UART2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0148)
+#define OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET 0x014c
#define OMAP4430_RM_L4PER_UART2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x014c)
+#define OMAP4_PM_L4PER_UART3_WKDEP_OFFSET 0x0150
#define OMAP4430_PM_L4PER_UART3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0150)
+#define OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET 0x0154
#define OMAP4430_RM_L4PER_UART3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0154)
+#define OMAP4_PM_L4PER_UART4_WKDEP_OFFSET 0x0158
#define OMAP4430_PM_L4PER_UART4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0158)
+#define OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET 0x015c
#define OMAP4430_RM_L4PER_UART4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x015c)
+#define OMAP4_PM_L4PER_MMCSD5_WKDEP_OFFSET 0x0160
#define OMAP4430_PM_L4PER_MMCSD5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0160)
+#define OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET 0x0164
#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0164)
+#define OMAP4_PM_L4PER_I2C5_WKDEP_OFFSET 0x0168
#define OMAP4430_PM_L4PER_I2C5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0168)
+#define OMAP4_RM_L4PER_I2C5_CONTEXT_OFFSET 0x016c
#define OMAP4430_RM_L4PER_I2C5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x016c)
+#define OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET 0x01a4
#define OMAP4430_RM_L4SEC_AES1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01a4)
+#define OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET 0x01ac
#define OMAP4430_RM_L4SEC_AES2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01ac)
+#define OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET 0x01b4
#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01b4)
+#define OMAP4_RM_L4SEC_PKAEIP29_CONTEXT_OFFSET 0x01bc
#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01bc)
+#define OMAP4_RM_L4SEC_RNG_CONTEXT_OFFSET 0x01c4
#define OMAP4430_RM_L4SEC_RNG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01c4)
+#define OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET 0x01cc
#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01cc)
+#define OMAP4_RM_L4SEC_CRYPTODMA_CONTEXT_OFFSET 0x01dc
#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01dc)
/* PRM.CEFUSE_PRM register offsets */
+#define OMAP4_PM_CEFUSE_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_CEFUSE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0000)
+#define OMAP4_PM_CEFUSE_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_CEFUSE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0004)
+#define OMAP4_RM_CEFUSE_CEFUSE_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0024)
/* PRM.WKUP_PRM register offsets */
+#define OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0024)
+#define OMAP4_RM_WKUP_WDT1_CONTEXT_OFFSET 0x002c
#define OMAP4430_RM_WKUP_WDT1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x002c)
+#define OMAP4_PM_WKUP_WDT2_WKDEP_OFFSET 0x0030
#define OMAP4430_PM_WKUP_WDT2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0030)
+#define OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET 0x0034
#define OMAP4430_RM_WKUP_WDT2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0034)
+#define OMAP4_PM_WKUP_GPIO1_WKDEP_OFFSET 0x0038
#define OMAP4430_PM_WKUP_GPIO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0038)
+#define OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET 0x003c
#define OMAP4430_RM_WKUP_GPIO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x003c)
+#define OMAP4_PM_WKUP_TIMER1_WKDEP_OFFSET 0x0040
#define OMAP4430_PM_WKUP_TIMER1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0040)
+#define OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET 0x0044
#define OMAP4430_RM_WKUP_TIMER1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0044)
+#define OMAP4_PM_WKUP_TIMER12_WKDEP_OFFSET 0x0048
#define OMAP4430_PM_WKUP_TIMER12_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0048)
+#define OMAP4_RM_WKUP_TIMER12_CONTEXT_OFFSET 0x004c
#define OMAP4430_RM_WKUP_TIMER12_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x004c)
+#define OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET 0x0054
#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0054)
+#define OMAP4_PM_WKUP_USIM_WKDEP_OFFSET 0x0058
#define OMAP4430_PM_WKUP_USIM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0058)
+#define OMAP4_RM_WKUP_USIM_CONTEXT_OFFSET 0x005c
#define OMAP4430_RM_WKUP_USIM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x005c)
+#define OMAP4_RM_WKUP_SARRAM_CONTEXT_OFFSET 0x0064
#define OMAP4430_RM_WKUP_SARRAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0064)
+#define OMAP4_PM_WKUP_KEYBOARD_WKDEP_OFFSET 0x0078
#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0078)
+#define OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET 0x007c
#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x007c)
+#define OMAP4_PM_WKUP_RTC_WKDEP_OFFSET 0x0080
#define OMAP4430_PM_WKUP_RTC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0080)
+#define OMAP4_RM_WKUP_RTC_CONTEXT_OFFSET 0x0084
#define OMAP4430_RM_WKUP_RTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0084)
/* PRM.WKUP_CM register offsets */
+#define OMAP4_CM_WKUP_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_WKUP_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0000)
+#define OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0020)
+#define OMAP4_CM_WKUP_WDT1_CLKCTRL_OFFSET 0x0028
#define OMAP4430_CM_WKUP_WDT1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0028)
+#define OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET 0x0030
#define OMAP4430_CM_WKUP_WDT2_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0030)
+#define OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET 0x0038
#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0038)
+#define OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET 0x0040
#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0040)
+#define OMAP4_CM_WKUP_TIMER12_CLKCTRL_OFFSET 0x0048
#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0048)
+#define OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET 0x0050
#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0050)
+#define OMAP4_CM_WKUP_USIM_CLKCTRL_OFFSET 0x0058
#define OMAP4430_CM_WKUP_USIM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0058)
+#define OMAP4_CM_WKUP_SARRAM_CLKCTRL_OFFSET 0x0060
#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0060)
+#define OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET 0x0078
#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0078)
+#define OMAP4_CM_WKUP_RTC_CLKCTRL_OFFSET 0x0080
#define OMAP4430_CM_WKUP_RTC_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0080)
+#define OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET 0x0088
#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0088)
/* PRM.EMU_PRM register offsets */
+#define OMAP4_PM_EMU_PWRSTCTRL_OFFSET 0x0000
#define OMAP4430_PM_EMU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0000)
+#define OMAP4_PM_EMU_PWRSTST_OFFSET 0x0004
#define OMAP4430_PM_EMU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0004)
+#define OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET 0x0024
#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0024)
/* PRM.EMU_CM register offsets */
+#define OMAP4_CM_EMU_CLKSTCTRL_OFFSET 0x0000
#define OMAP4430_CM_EMU_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0000)
+#define OMAP4_CM_EMU_DYNAMICDEP_OFFSET 0x0008
#define OMAP4430_CM_EMU_DYNAMICDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0008)
+#define OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0020)
/* PRM.DEVICE_PRM register offsets */
+#define OMAP4_PRM_RSTCTRL_OFFSET 0x0000
#define OMAP4430_PRM_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0000)
+#define OMAP4_PRM_RSTST_OFFSET 0x0004
#define OMAP4430_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0004)
+#define OMAP4_PRM_RSTTIME_OFFSET 0x0008
#define OMAP4430_PRM_RSTTIME OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0008)
+#define OMAP4_PRM_CLKREQCTRL_OFFSET 0x000c
#define OMAP4430_PRM_CLKREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x000c)
+#define OMAP4_PRM_VOLTCTRL_OFFSET 0x0010
#define OMAP4430_PRM_VOLTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0010)
+#define OMAP4_PRM_PWRREQCTRL_OFFSET 0x0014
#define OMAP4430_PRM_PWRREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0014)
+#define OMAP4_PRM_PSCON_COUNT_OFFSET 0x0018
#define OMAP4430_PRM_PSCON_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0018)
+#define OMAP4_PRM_IO_COUNT_OFFSET 0x001c
#define OMAP4430_PRM_IO_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x001c)
+#define OMAP4_PRM_IO_PMCTRL_OFFSET 0x0020
#define OMAP4430_PRM_IO_PMCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0020)
+#define OMAP4_PRM_VOLTSETUP_WARMRESET_OFFSET 0x0024
#define OMAP4430_PRM_VOLTSETUP_WARMRESET OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0024)
+#define OMAP4_PRM_VOLTSETUP_CORE_OFF_OFFSET 0x0028
#define OMAP4430_PRM_VOLTSETUP_CORE_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0028)
+#define OMAP4_PRM_VOLTSETUP_MPU_OFF_OFFSET 0x002c
#define OMAP4430_PRM_VOLTSETUP_MPU_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x002c)
+#define OMAP4_PRM_VOLTSETUP_IVA_OFF_OFFSET 0x0030
#define OMAP4430_PRM_VOLTSETUP_IVA_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0030)
+#define OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET 0x0034
#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0034)
+#define OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET 0x0038
#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0038)
+#define OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET 0x003c
#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x003c)
+#define OMAP4_PRM_VP_CORE_CONFIG_OFFSET 0x0040
#define OMAP4430_PRM_VP_CORE_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0040)
+#define OMAP4_PRM_VP_CORE_STATUS_OFFSET 0x0044
#define OMAP4430_PRM_VP_CORE_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0044)
+#define OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET 0x0048
#define OMAP4430_PRM_VP_CORE_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0048)
+#define OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET 0x004c
#define OMAP4430_PRM_VP_CORE_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x004c)
+#define OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET 0x0050
#define OMAP4430_PRM_VP_CORE_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0050)
+#define OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET 0x0054
#define OMAP4430_PRM_VP_CORE_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0054)
+#define OMAP4_PRM_VP_MPU_CONFIG_OFFSET 0x0058
#define OMAP4430_PRM_VP_MPU_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0058)
+#define OMAP4_PRM_VP_MPU_STATUS_OFFSET 0x005c
#define OMAP4430_PRM_VP_MPU_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x005c)
+#define OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET 0x0060
#define OMAP4430_PRM_VP_MPU_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0060)
+#define OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET 0x0064
#define OMAP4430_PRM_VP_MPU_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0064)
+#define OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET 0x0068
#define OMAP4430_PRM_VP_MPU_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0068)
+#define OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET 0x006c
#define OMAP4430_PRM_VP_MPU_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x006c)
+#define OMAP4_PRM_VP_IVA_CONFIG_OFFSET 0x0070
#define OMAP4430_PRM_VP_IVA_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0070)
+#define OMAP4_PRM_VP_IVA_STATUS_OFFSET 0x0074
#define OMAP4430_PRM_VP_IVA_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0074)
+#define OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET 0x0078
#define OMAP4430_PRM_VP_IVA_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0078)
+#define OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET 0x007c
#define OMAP4430_PRM_VP_IVA_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x007c)
+#define OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET 0x0080
#define OMAP4430_PRM_VP_IVA_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0080)
+#define OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET 0x0084
#define OMAP4430_PRM_VP_IVA_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0084)
+#define OMAP4_PRM_VC_SMPS_SA_OFFSET 0x0088
#define OMAP4430_PRM_VC_SMPS_SA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0088)
+#define OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET 0x008c
#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x008c)
+#define OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET 0x0090
#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0090)
+#define OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET 0x0094
#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0094)
+#define OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET 0x0098
#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0098)
+#define OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET 0x009c
#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x009c)
+#define OMAP4_PRM_VC_VAL_BYPASS_OFFSET 0x00a0
#define OMAP4430_PRM_VC_VAL_BYPASS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a0)
+#define OMAP4_PRM_VC_CFG_CHANNEL_OFFSET 0x00a4
#define OMAP4430_PRM_VC_CFG_CHANNEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a4)
+#define OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET 0x00a8
#define OMAP4430_PRM_VC_CFG_I2C_MODE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a8)
+#define OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET 0x00ac
#define OMAP4430_PRM_VC_CFG_I2C_CLK OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ac)
+#define OMAP4_PRM_SRAM_COUNT_OFFSET 0x00b0
#define OMAP4430_PRM_SRAM_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b0)
+#define OMAP4_PRM_SRAM_WKUP_SETUP_OFFSET 0x00b4
#define OMAP4430_PRM_SRAM_WKUP_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b4)
+#define OMAP4_PRM_LDO_SRAM_CORE_SETUP_OFFSET 0x00b8
#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b8)
+#define OMAP4_PRM_LDO_SRAM_CORE_CTRL_OFFSET 0x00bc
#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00bc)
+#define OMAP4_PRM_LDO_SRAM_MPU_SETUP_OFFSET 0x00c0
#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c0)
+#define OMAP4_PRM_LDO_SRAM_MPU_CTRL_OFFSET 0x00c4
#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c4)
+#define OMAP4_PRM_LDO_SRAM_IVA_SETUP_OFFSET 0x00c8
#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c8)
+#define OMAP4_PRM_LDO_SRAM_IVA_CTRL_OFFSET 0x00cc
#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00cc)
+#define OMAP4_PRM_LDO_ABB_MPU_SETUP_OFFSET 0x00d0
#define OMAP4430_PRM_LDO_ABB_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d0)
+#define OMAP4_PRM_LDO_ABB_MPU_CTRL_OFFSET 0x00d4
#define OMAP4430_PRM_LDO_ABB_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d4)
+#define OMAP4_PRM_LDO_ABB_IVA_SETUP_OFFSET 0x00d8
#define OMAP4430_PRM_LDO_ABB_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8)
+#define OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET 0x00dc
#define OMAP4430_PRM_LDO_ABB_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc)
+#define OMAP4_PRM_LDO_BANDGAP_CTRL_OFFSET 0x00e0
#define OMAP4430_PRM_LDO_BANDGAP_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0)
+#define OMAP4_PRM_DEVICE_OFF_CTRL_OFFSET 0x00e4
#define OMAP4430_PRM_DEVICE_OFF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4)
+#define OMAP4_PRM_PHASE1_CNDP_OFFSET 0x00e8
#define OMAP4430_PRM_PHASE1_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e8)
+#define OMAP4_PRM_PHASE2A_CNDP_OFFSET 0x00ec
#define OMAP4430_PRM_PHASE2A_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ec)
+#define OMAP4_PRM_PHASE2B_CNDP_OFFSET 0x00f0
#define OMAP4430_PRM_PHASE2B_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0)
+#define OMAP4_PRM_MODEM_IF_CTRL_OFFSET 0x00f4
#define OMAP4430_PRM_MODEM_IF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4)
-/* CHIRON_PRCM */
-
+/*
+ * PRCM_MPU
+ *
+ * The PRCM_MPU is a local PRCM inside the MPU subsystem. For the PRCM (global)
+ * point of view the PRCM_MPU is a single entity. It shares the same
+ * programming model as the global PRCM and thus can be assimilate as two new
+ * MOD inside the PRCM
+ */
-/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
-#define OMAP4430_REVISION_PRCM OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+/* PRCM_MPU.OCP_SOCKET_PRCM register offsets */
+#define OMAP4_REVISION_PRCM_OFFSET 0x0000
+#define OMAP4430_REVISION_PRCM OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD, 0x0000)
-/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
-#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+/* PRCM_MPU.DEVICE_PRM register offsets */
+#define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET 0x0000
+#define OMAP4430_PRCM_MPU_PRM_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_MOD, 0x0000)
-/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
-#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+/* PRCM_MPU.CPU0 register offsets */
+#define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET 0x0000
+#define OMAP4430_PM_CPU0_PWRSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0000)
+#define OMAP4_PM_CPU0_PWRSTST_OFFSET 0x0004
+#define OMAP4430_PM_CPU0_PWRSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0004)
+#define OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET 0x0008
+#define OMAP4430_RM_CPU0_CPU0_CONTEXT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0008)
+#define OMAP4_RM_CPU0_CPU0_RSTCTRL_OFFSET 0x000c
+#define OMAP4430_RM_CPU0_CPU0_RSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x000c)
+#define OMAP4_RM_CPU0_CPU0_RSTST_OFFSET 0x0010
+#define OMAP4430_RM_CPU0_CPU0_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0010)
+#define OMAP4_CM_CPU0_CPU0_CLKCTRL_OFFSET 0x0014
+#define OMAP4430_CM_CPU0_CPU0_CLKCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0014)
+#define OMAP4_CM_CPU0_CLKSTCTRL_OFFSET 0x0018
+#define OMAP4430_CM_CPU0_CLKSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0018)
-/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
-#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+/* PRCM_MPU.CPU1 register offsets */
+#define OMAP4_PM_CPU1_PWRSTCTRL_OFFSET 0x0000
+#define OMAP4430_PM_CPU1_PWRSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0000)
+#define OMAP4_PM_CPU1_PWRSTST_OFFSET 0x0004
+#define OMAP4430_PM_CPU1_PWRSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0004)
+#define OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET 0x0008
+#define OMAP4430_RM_CPU1_CPU1_CONTEXT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0008)
+#define OMAP4_RM_CPU1_CPU1_RSTCTRL_OFFSET 0x000c
+#define OMAP4430_RM_CPU1_CPU1_RSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x000c)
+#define OMAP4_RM_CPU1_CPU1_RSTST_OFFSET 0x0010
+#define OMAP4430_RM_CPU1_CPU1_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0010)
+#define OMAP4_CM_CPU1_CPU1_CLKCTRL_OFFSET 0x0014
+#define OMAP4430_CM_CPU1_CPU1_CLKCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0014)
+#define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET 0x0018
+#define OMAP4430_CM_CPU1_CLKSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0018)
#endif
tristate
config OMAP_IOMMU_DEBUG
- depends on OMAP_IOMMU
- tristate
+ tristate "Export OMAP IOMMU internals in DebugFS"
+ depends on OMAP_IOMMU && DEBUG_FS
+ help
+ Select this to see extensive information about
+ the internal state of OMAP IOMMU in debugfs.
+
+ Say N unless you know you need this.
choice
prompt "System timer"
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
#include <linux/mutex.h>
-#include <linux/platform_device.h>
#include <linux/cpufreq.h>
#include <linux/debugfs.h>
#include <linux/io.h>
static struct clk_functions *arch_clock;
-/*-------------------------------------------------------------------------
+/*
* Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
+ */
int clk_enable(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_get_rate);
-/*-------------------------------------------------------------------------
+/*
* Optional clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
+ */
long clk_round_rate(struct clk *clk, unsigned long rate)
{
unsigned long flags;
int ret = -EINVAL;
- if (cpu_is_omap44xx())
- /* OMAP4 clk framework not supported yet */
- return 0;
if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
return ret;
}
EXPORT_SYMBOL(clk_get_parent);
-/*-------------------------------------------------------------------------
+/*
* OMAP specific clock functions shared between omap1 and omap2
- *-------------------------------------------------------------------------*/
+ */
int __initdata mpurate;
}
/* Propagate rate to children */
-void propagate_rate(struct clk * tclk)
+void propagate_rate(struct clk *tclk)
{
struct clk *clkp;
}
#endif
-/*-------------------------------------------------------------------------*/
+/*
+ *
+ */
#ifdef CONFIG_OMAP_RESET_CLOCKS
/*
if (ck->ops == &clkops_null)
continue;
- if (ck->usecount > 0 || ck->enable_reg == 0)
+ if (ck->usecount > 0 || !ck->enable_reg)
continue;
spin_lock_irqsave(&clockfw_lock, flags);
struct omap_board_config_kernel *omap_board_config;
int omap_board_config_size;
-/* used by omap-smp.c and board-4430sdp.c */
-void __iomem *gic_cpu_base_addr;
-
static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
{
struct omap_board_config_kernel *kinfo = NULL;
burst = 0x2;
break;
}
- /* not supported by current hardware on OMAP1
+ /*
+ * not supported by current hardware on OMAP1
* w |= (0x03 << 7);
* fall through
*/
burst = 0x3;
break;
}
- /* OMAP1 don't support burst 16
+ /*
+ * OMAP1 don't support burst 16
* fall through
*/
default:
burst = 0x3;
break;
}
- /* OMAP1 don't support burst 16
+ /*
+ * OMAP1 don't support burst 16
* fall through
*/
default:
spin_unlock_irqrestore(&dma_chan_lock, flags);
}
+static inline void omap2_disable_irq_lch(int lch)
+{
+ u32 val;
+ unsigned long flags;
+
+ if (!cpu_class_is_omap2())
+ return;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ val = dma_read(IRQENABLE_L0);
+ val &= ~(1 << lch);
+ dma_write(val, IRQENABLE_L0);
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+}
+
int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
void *data, int *dma_ch_out)
}
if (cpu_class_is_omap2()) {
- u32 val;
-
- spin_lock_irqsave(&dma_chan_lock, flags);
- /* Disable interrupts */
- val = dma_read(IRQENABLE_L0);
- val &= ~(1 << lch);
- dma_write(val, IRQENABLE_L0);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
+ omap2_disable_irq_lch(lch);
/* Clear the CSR register and IRQ status register */
dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
return -EINVAL;
}
- /* Allocate a queue to maintain the status of the channels
- * in the chain */
+ /*
+ * Allocate a queue to maintain the status of the channels
+ * in the chain
+ */
channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
if (channels == NULL) {
printk(KERN_ERR "omap_dma: No memory for channel queue\n");
printk(KERN_INFO "DMA transaction error with device %d\n",
dma_chan[ch].dev_id);
if (cpu_class_is_omap2()) {
- /* Errata: sDMA Channel is not disabled
+ /*
+ * Errata: sDMA Channel is not disabled
* after a transaction error. So we explicitely
* disable the channel
*/
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
+ if (cpu_class_is_omap2())
+ omap2_disable_irq_lch(ch);
+
dma_chan[ch].dev_id = -1;
dma_chan[ch].next_lch = -1;
{ .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 },
};
static const char *omap4_dm_source_names[] __initdata = {
- "sys_ck",
- "omap_32k_fck",
+ "sys_clkin_ck",
+ "sys_32k_ck",
NULL
};
static struct clk *omap4_dm_source_clocks[2];
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <asm/mach/irq.h>
+#include <plat/powerdomain.h>
/*
* OMAP1510 GPIO registers
#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
#define OMAP4_GPIO_IRQWAKEN0 0x0044
#define OMAP4_GPIO_IRQWAKEN1 0x0048
-#define OMAP4_GPIO_SYSSTATUS 0x0104
+#define OMAP4_GPIO_SYSSTATUS 0x0114
+#define OMAP4_GPIO_IRQENABLE1 0x011c
+#define OMAP4_GPIO_WAKE_EN 0x0120
+#define OMAP4_GPIO_IRQSTATUS2 0x0128
+#define OMAP4_GPIO_IRQENABLE2 0x012c
#define OMAP4_GPIO_CTRL 0x0130
#define OMAP4_GPIO_OE 0x0134
#define OMAP4_GPIO_DATAIN 0x0138
#define OMAP4_GPIO_FALLINGDETECT 0x014c
#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
+#define OMAP4_GPIO_SETIRQENABLE1 0x0164
+#define OMAP4_GPIO_CLEARWKUENA 0x0180
+#define OMAP4_GPIO_SETWKUENA 0x0184
#define OMAP4_GPIO_CLEARDATAOUT 0x0190
#define OMAP4_GPIO_SETDATAOUT 0x0194
/*
struct gpio_chip chip;
struct clk *dbck;
u32 mod_usage;
+ u32 dbck_enable_mask;
};
#define METHOD_MPUIO 0
u32 risingdetect;
u32 fallingdetect;
u32 dataout;
- u32 setwkuena;
- u32 setdataout;
};
static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
reg += OMAP7XX_GPIO_DATA_OUTPUT;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
- case METHOD_GPIO_44XX:
reg += OMAP24XX_GPIO_DATAOUT;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_44XX:
+ reg += OMAP4_GPIO_DATAOUT;
+ break;
#endif
default:
return -EINVAL;
goto done;
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ bank->dbck_enable_mask = val;
if (enable)
clk_enable(bank->dbck);
else
OMAP4_GPIO_IRQWAKEN0);
}
} else {
- if (trigger != 0)
+ /*
+ * GPIO wakeup request can only be generated on edge
+ * transitions
+ */
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
__raw_writel(1 << gpio, bank->base
+ OMAP24XX_GPIO_SETWKUENA);
else
__raw_writel(1 << gpio, bank->base
+ OMAP24XX_GPIO_CLEARWKUENA);
}
- } else {
- if (trigger != 0)
+ }
+ /* This part needs to be executed always for OMAP34xx */
+ if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
+ /*
+ * Log the edge gpio and manually trigger the IRQ
+ * after resume if the input level changes
+ * to avoid irq lost during PER RET/OFF mode
+ * Applies for omap2 non-wakeup gpio and all omap3 gpios
+ */
+ if (trigger & IRQ_TYPE_EDGE_BOTH)
bank->enabled_non_wakeup_gpios |= gpio_bit;
else
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
#endif
if (!cpu_class_is_omap1()) {
if (!bank->mod_usage) {
+ void __iomem *reg = bank->base;
u32 ctrl;
- ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
- ctrl &= 0xFFFFFFFE;
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ reg += OMAP24XX_GPIO_CTRL;
+ else if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_CTRL;
+ ctrl = __raw_readl(reg);
/* Module is enabled, clocks are not gated */
- __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+ ctrl &= 0xFFFFFFFE;
+ __raw_writel(ctrl, reg);
}
bank->mod_usage |= 1 << offset;
}
__raw_writel(1 << offset, reg);
}
#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if ((bank->method == METHOD_GPIO_24XX) ||
- (bank->method == METHOD_GPIO_44XX)) {
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+ if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
__raw_writel(1 << offset, reg);
}
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+ if (bank->method == METHOD_GPIO_44XX) {
+ /* Disable wake-up during idle for dynamic tick */
+ void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ __raw_writel(1 << offset, reg);
+ }
#endif
if (!cpu_class_is_omap1()) {
bank->mod_usage &= ~(1 << offset);
if (!bank->mod_usage) {
+ void __iomem *reg = bank->base;
u32 ctrl;
- ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ reg += OMAP24XX_GPIO_CTRL;
+ else if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_CTRL;
+ ctrl = __raw_readl(reg);
/* Module is disabled, clocks are gated */
ctrl |= 1;
- __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+ __raw_writel(ctrl, reg);
}
}
_reset_gpio(bank, bank->chip.base + offset);
reg += OMAP7XX_GPIO_DIR_CONTROL;
break;
case METHOD_GPIO_24XX:
- case METHOD_GPIO_44XX:
reg += OMAP24XX_GPIO_OE;
break;
+ case METHOD_GPIO_44XX:
+ reg += OMAP4_GPIO_OE;
+ break;
+ default:
+ WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
+ return -EINVAL;
}
return __raw_readl(reg) & mask;
}
__raw_writel(0, bank->base +
OMAP24XX_GPIO_CTRL);
}
- if (i < ARRAY_SIZE(non_wakeup_gpios))
+ if (cpu_is_omap24xx() &&
+ i < ARRAY_SIZE(non_wakeup_gpios))
bank->non_wakeup_gpios = non_wakeup_gpios[i];
gpio_count = 32;
}
static int workaround_enabled;
-void omap2_gpio_prepare_for_retention(void)
+void omap2_gpio_prepare_for_idle(int power_state)
{
int i, c = 0;
+ int min = 0;
- /* Remove triggering for all non-wakeup GPIOs. Otherwise spurious
- * IRQs will be generated. See OMAP2420 Errata item 1.101. */
- for (i = 0; i < gpio_bank_count; i++) {
+ if (cpu_is_omap34xx())
+ min = 1;
+
+ for (i = min; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
u32 l1, l2;
+ if (bank->dbck_enable_mask)
+ clk_disable(bank->dbck);
+
+ if (power_state > PWRDM_POWER_OFF)
+ continue;
+
+ /* If going to OFF, remove triggering for all
+ * non-wakeup GPIOs. Otherwise spurious IRQs will be
+ * generated. See OMAP2420 Errata item 1.101. */
if (!(bank->enabled_non_wakeup_gpios))
continue;
workaround_enabled = 1;
}
-void omap2_gpio_resume_after_retention(void)
+void omap2_gpio_resume_after_idle(void)
{
int i;
+ int min = 0;
- if (!workaround_enabled)
- return;
- for (i = 0; i < gpio_bank_count; i++) {
+ if (cpu_is_omap34xx())
+ min = 1;
+ for (i = min; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
u32 l, gen, gen0, gen1;
+ if (bank->dbck_enable_mask)
+ clk_enable(bank->dbck);
+
+ if (!workaround_enabled)
+ continue;
+
if (!(bank->enabled_non_wakeup_gpios))
continue;
* horribly racy, but it's the best we can do to work around
* this silicon bug. */
l ^= bank->saved_datain;
- l &= bank->non_wakeup_gpios;
+ l &= bank->enabled_non_wakeup_gpios;
/*
* No need to generate IRQs for the rising edge for gpio IRQs
__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
gpio_context[i].dataout =
__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
- gpio_context[i].setwkuena =
- __raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA);
- gpio_context[i].setdataout =
- __raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT);
}
}
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(gpio_context[i].dataout,
bank->base + OMAP24XX_GPIO_DATAOUT);
- __raw_writel(gpio_context[i].setwkuena,
- bank->base + OMAP24XX_GPIO_SETWKUENA);
- __raw_writel(gpio_context[i].setdataout,
- bank->base + OMAP24XX_GPIO_SETDATAOUT);
}
}
#endif
}
arch_initcall(omap_gpio_sysinit);
-
-
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static int dbg_gpio_show(struct seq_file *s, void *unused)
-{
- unsigned i, j, gpio;
-
- for (i = 0, gpio = 0; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = gpio_bank + i;
- unsigned bankwidth = 16;
- u32 mask = 1;
-
- if (bank_is_mpuio(bank))
- gpio = OMAP_MPUIO(0);
- else if (cpu_class_is_omap2() || cpu_is_omap7xx())
- bankwidth = 32;
-
- for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
- unsigned irq, value, is_in, irqstat;
- const char *label;
-
- label = gpiochip_is_requested(&bank->chip, j);
- if (!label)
- continue;
-
- irq = bank->virtual_irq_start + j;
- value = gpio_get_value(gpio);
- is_in = gpio_is_input(bank, mask);
-
- if (bank_is_mpuio(bank))
- seq_printf(s, "MPUIO %2d ", j);
- else
- seq_printf(s, "GPIO %3d ", gpio);
- seq_printf(s, "(%-20.20s): %s %s",
- label,
- is_in ? "in " : "out",
- value ? "hi" : "lo");
-
-/* FIXME for at least omap2, show pullup/pulldown state */
-
- irqstat = irq_desc[irq].status;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
- if (is_in && ((bank->suspend_wakeup & mask)
- || irqstat & IRQ_TYPE_SENSE_MASK)) {
- char *trigger = NULL;
-
- switch (irqstat & IRQ_TYPE_SENSE_MASK) {
- case IRQ_TYPE_EDGE_FALLING:
- trigger = "falling";
- break;
- case IRQ_TYPE_EDGE_RISING:
- trigger = "rising";
- break;
- case IRQ_TYPE_EDGE_BOTH:
- trigger = "bothedge";
- break;
- case IRQ_TYPE_LEVEL_LOW:
- trigger = "low";
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- trigger = "high";
- break;
- case IRQ_TYPE_NONE:
- trigger = "(?)";
- break;
- }
- seq_printf(s, ", irq-%d %-8s%s",
- irq, trigger,
- (bank->suspend_wakeup & mask)
- ? " wakeup" : "");
- }
-#endif
- seq_printf(s, "\n");
- }
-
- if (bank_is_mpuio(bank)) {
- seq_printf(s, "\n");
- gpio = 0;
- }
- }
- return 0;
-}
-
-static int dbg_gpio_open(struct inode *inode, struct file *file)
-{
- return single_open(file, dbg_gpio_show, &inode->i_private);
-}
-
-static const struct file_operations debug_fops = {
- .open = dbg_gpio_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init omap_gpio_debuginit(void)
-{
- (void) debugfs_create_file("omap_gpio", S_IRUGO,
- NULL, NULL, &debug_fops);
- return 0;
-}
-late_initcall(omap_gpio_debuginit);
-#endif
#define OMAP2_I2C_BASE1 0x48070000
#define OMAP2_I2C_BASE2 0x48072000
#define OMAP2_I2C_BASE3 0x48060000
+#define OMAP4_I2C_BASE4 0x48350000
static const char name[] = "i2c_omap";
static struct resource i2c_resources[][2] = {
{ I2C_RESOURCE_BUILDER(0, 0) },
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
+#if defined(CONFIG_ARCH_OMAP2PLUS)
+ { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, 0) },
#endif
-#if defined(CONFIG_ARCH_OMAP3)
- { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+ { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, 0) },
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ { I2C_RESOURCE_BUILDER(OMAP4_I2C_BASE4, 0) },
#endif
};
static struct omap_i2c_bus_platform_data i2c_pdata[ARRAY_SIZE(i2c_resources)];
static struct platform_device omap_i2c_devices[] = {
I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2PLUS)
I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_pdata[1]),
#endif
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_pdata[2]),
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ I2C_DEV_BUILDER(4, i2c_resources[3], &i2c_pdata[3]),
+#endif
};
#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
ports = 2;
else if (cpu_is_omap34xx())
ports = 3;
+ else if (cpu_is_omap44xx())
+ ports = 4;
return ports;
}
-static int __init omap_i2c_add_bus(int bus_id)
+/* Shared between omap2 and 3 */
+static resource_size_t omap2_i2c_irq[3] __initdata = {
+ INT_24XX_I2C1_IRQ,
+ INT_24XX_I2C2_IRQ,
+ INT_34XX_I2C3_IRQ,
+};
+
+static resource_size_t omap4_i2c_irq[4] __initdata = {
+ OMAP44XX_IRQ_I2C1,
+ OMAP44XX_IRQ_I2C2,
+ OMAP44XX_IRQ_I2C3,
+ OMAP44XX_IRQ_I2C4,
+};
+
+static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id)
{
- struct platform_device *pdev;
struct omap_i2c_bus_platform_data *pd;
struct resource *res;
- resource_size_t base, irq;
- pdev = &omap_i2c_devices[bus_id - 1];
pd = pdev->dev.platform_data;
+ res = pdev->resource;
+ res[0].start = OMAP1_I2C_BASE;
+ res[0].end = res[0].start + OMAP_I2C_SIZE;
+ res[1].start = INT_I2C;
+ omap1_i2c_mux_pins(bus_id);
+
+ return platform_device_register(pdev);
+}
+
+static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
+{
+ struct resource *res;
+ resource_size_t *irq;
+
+ res = pdev->resource;
+
+ if (!cpu_is_omap44xx())
+ irq = omap2_i2c_irq;
+ else
+ irq = omap4_i2c_irq;
+
if (bus_id == 1) {
- res = pdev->resource;
- if (cpu_class_is_omap1()) {
- base = OMAP1_I2C_BASE;
- irq = INT_I2C;
- } else {
- base = OMAP2_I2C_BASE1;
- irq = INT_24XX_I2C1_IRQ;
- }
- res[0].start = base;
- res[0].end = base + OMAP_I2C_SIZE;
- res[1].start = irq;
+ res[0].start = OMAP2_I2C_BASE1;
+ res[0].end = res[0].start + OMAP_I2C_SIZE;
}
- if (cpu_class_is_omap1())
- omap1_i2c_mux_pins(bus_id);
- if (cpu_class_is_omap2())
- omap2_i2c_mux_pins(bus_id);
+ res[1].start = irq[bus_id - 1];
+ omap2_i2c_mux_pins(bus_id);
/*
* When waiting for completion of a i2c transfer, we need to
* ensure quick enough wakeup from idle, when transfer
* completes.
*/
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx()) {
+ struct omap_i2c_bus_platform_data *pd;
+
+ pd = pdev->dev.platform_data;
pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat;
+ }
return platform_device_register(pdev);
}
+static int __init omap_i2c_add_bus(int bus_id)
+{
+ struct platform_device *pdev;
+
+ pdev = &omap_i2c_devices[bus_id - 1];
+
+ if (cpu_class_is_omap1())
+ return omap1_i2c_add_bus(pdev, bus_id);
+ else
+ return omap2_i2c_add_bus(pdev, bus_id);
+}
+
/**
* omap_i2c_bus_setup - Process command line options for the I2C bus speed
* @str: String of options
#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
/* Clksel_rate flags */
-#define DEFAULT_RATE (1 << 0)
-#define RATE_IN_242X (1 << 1)
-#define RATE_IN_243X (1 << 2)
-#define RATE_IN_343X (1 << 3) /* rates common to all 343X */
-#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */
-#define RATE_IN_36XX (1 << 5)
-#define RATE_IN_4430 (1 << 6)
+#define RATE_IN_242X (1 << 0)
+#define RATE_IN_243X (1 << 1)
+#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */
+#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */
+#define RATE_IN_36XX (1 << 4)
+#define RATE_IN_4430 (1 << 5)
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX)
#endif
struct sys_timer;
-/* used by omap-smp.c and board-4430sdp.c */
-extern void __iomem *gic_cpu_base_addr;
-
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
/* 44xx control status register offset */
#define OMAP44XX_CONTROL_STATUS 0x2c4
+/* 44xx-only CONTROL_GENERAL register offsets */
+#define OMAP44XX_CONTROL_MMC1 0x628
+#define OMAP44XX_CONTROL_PBIAS_LITE 0x600
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1)
#define OMAP2_PBIASLITEVMODE0 (1 << 0)
+/* CONTROL_PBIAS_LITE bits for OMAP4 */
+#define OMAP4_MMC1_PWRDNZ (1 << 26)
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE (1 << 25)
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT (1 << 24)
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR (1 << 23)
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ (1 << 22)
+#define OMAP4_MMC1_PBIASLITE_VMODE (1 << 21)
+#define OMAP4_USBC1_ICUSB_PWRDNZ (1 << 20)
+
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 (1 << 31)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1 (1 << 30)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 (1 << 29)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3 (1 << 28)
+#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL (1 << 27)
+#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL (1 << 26)
+#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL (1 << 25)
+
/* CONTROL_PROG_IO1 bits */
#define OMAP3630_PRG_SDMMC1_SPEEDCTRL (1 << 20)
IH_GPIO_BASE + (nr))
extern int omap_gpio_init(void); /* Call from board init only */
-extern void omap2_gpio_prepare_for_retention(void);
-extern void omap2_gpio_resume_after_retention(void);
+extern void omap2_gpio_prepare_for_idle(int power_state);
+extern void omap2_gpio_resume_after_idle(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
extern void omap_gpio_save_context(void);
#include <mach/hardware.h>
+#ifdef CONFIG_FIQ
+#define FIQ_START 1024
+#endif
+
#endif
/* Regulator off remapped to sleep */
unsigned vcc_aux_disable_is_sleep:1;
+ /* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS (1 << 0)
+ unsigned features;
+
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
# define OMAP_NAME omap16xx
# endif
#endif
-#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
+#ifdef CONFIG_ARCH_OMAP2PLUS
# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-# error "OMAP1 and OMAP2 can't be selected at the same time"
+# error "OMAP1 and OMAP2PLUS can't be selected at the same time"
# endif
#endif
#ifdef CONFIG_ARCH_OMAP2420
# define OMAP_NAME omap2430
# endif
#endif
-#ifdef CONFIG_ARCH_OMAP3430
+#ifdef CONFIG_ARCH_OMAP3
# ifdef OMAP_NAME
# undef MULTI_OMAP2
# define MULTI_OMAP2
# else
-# define OMAP_NAME omap3430
+# define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap4
# endif
#endif
#define OMAP4430_CM_BASE OMAP4430_CM1_BASE
#define OMAP4430_CM2_BASE 0x4a008000
#define OMAP4430_PRM_BASE 0x4a306000
+#define OMAP4430_PRCM_MPU_BASE 0x48243000
#define OMAP44XX_GPMC_BASE 0x50000000
#define OMAP443X_SCM_BASE 0x4a002000
#define OMAP443X_CTRL_BASE 0x4a100000
#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000)
#define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000)
+#define OMAP4_MMU1_BASE 0x55082000
+#define OMAP4_MMU2_BASE 0x4A066000
+
#endif /* __ASM_ARCH_OMAP44XX_H */
#define OCP_USER_SDMA (1 << 1)
/* omap_hwmod_ocp_if.flags bits */
-#define OCPIF_HAS_IDLEST (1 << 0)
-#define OCPIF_SWSUP_IDLE (1 << 1)
-#define OCPIF_CAN_BURST (1 << 2)
+#define OCPIF_SWSUP_IDLE (1 << 0)
+#define OCPIF_CAN_BURST (1 << 1)
/**
* struct omap_hwmod_ocp_if - OCP interface data
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
- * @device_offs: device register offset from @module_offs
+ * @clkctrl_reg: PRCM address of the clock control register
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
- u32 module_offs;
- u16 device_offs;
- u8 submodule_wkdep_bit;
+ void __iomem *clkctrl_reg;
+ u8 submodule_wkdep_bit;
};
* when module is enabled, rather than the default, which is to
* enable autoidle
* HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ * HWMOD_NO_IDLEST : this module does not have idle status - this is the case
+ * only for few initiator modules on OMAP2 & 3.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
#define HWMOD_INIT_NO_IDLE (1 << 3)
#define HWMOD_NO_OCP_AUTOIDLE (1 << 4)
#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5)
+#define HWMOD_NO_IDLEST (1 << 6)
/*
* omap_hwmod._int_flags definitions
#define PWRDM_MAX_PWRSTS 4
/* Powerdomain allowable state bitfields */
+#define PWRSTS_ON (1 << PWRDM_POWER_ON)
#define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \
(1 << PWRDM_POWER_ON))
* in MEM bank 1 position. This is
* true for OMAP3430
*/
+#define PWRDM_HAS_LOWPOWERSTATECHANGE (1 << 2) /*
+ * support to transition from a
+ * sleep state to a lower sleep
+ * state without waking up the
+ * powerdomain
+ */
/*
* Number of memory banks that are power-controllable. On OMAP4430, the
#include <linux/init.h>
+/*
+ * Memory entry used for the DEBUG_LL UART configuration. See also
+ * uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO (PHYS_OFFSET + 0x3ffc)
+
/* OMAP1 serial ports */
#define OMAP1_UART1_BASE 0xfffb0000
#define OMAP1_UART2_BASE 0xfffb0800
/* External port on Zoom2/3 */
#define ZOOM_UART_BASE 0x10000000
-#define ZOOM_UART_VIRT 0xfb000000
+#define ZOOM_UART_VIRT 0xfa400000
#define OMAP_PORT_SHIFT 2
#define OMAP7XX_PORT_SHIFT 0
#include <linux/types.h>
#include <linux/serial_reg.h>
+#include <asm/memory.h>
#include <asm/mach-types.h>
#include <plat/serial.h>
-static volatile u8 *uart1_base;
-static int uart1_shift;
-
static volatile u8 *uart_base;
static int uart_shift;
/*
- * Store the DEBUG_LL uart number into UART1 scratchpad register.
+ * Store the DEBUG_LL uart number into memory.
* See also debug-macro.S, and serial.c for related code.
- *
- * Please note that we currently assume that:
- * - UART1 clocks are enabled for register access
- * - UART1 scratchpad register can be used
*/
-static void set_uart1_scratchpad(unsigned char port)
+static void set_omap_uart_info(unsigned char port)
{
- uart1_base[UART_SCR << uart1_shift] = port;
+ *(volatile u32 *)OMAP_UART_INFO = port;
}
static void putc(int c)
/*
* Macros to configure UART1 and debug UART
*/
-#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft, \
- dbg_uart, dbg_shft, dbg_id) \
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
if (machine_is_##mach()) { \
- uart1_base = (volatile u8 *)(uart1_phys); \
- uart1_shift = (uart1_shft); \
uart_base = (volatile u8 *)(dbg_uart); \
uart_shift = (dbg_shft); \
port = (dbg_id); \
- set_uart1_scratchpad(port); \
+ set_omap_uart_info(port); \
break; \
}
#define DEBUG_LL_OMAP7XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT, \
- OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p)
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
+ OMAP1UART##p)
#define DEBUG_LL_OMAP1(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT, \
- OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p)
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP1UART##p)
#define DEBUG_LL_OMAP2(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \
- OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p)
+ _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP2UART##p)
#define DEBUG_LL_OMAP3(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT, \
- OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p)
+ _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP3UART##p)
#define DEBUG_LL_OMAP4(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT, \
- OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p)
+ _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP4UART##p)
/* Zoom2/3 shift is different for UART1 and external port */
#define DEBUG_LL_ZOOM(mach) \
- _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \
- ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
static inline void __arch_decomp_setup(unsigned long arch_id)
{
#include "iopgtable.h"
+#define for_each_iotlb_cr(obj, n, __i, cr) \
+ for (__i = 0; \
+ (__i < (n)) && (cr = __iotlb_read_cr((obj), __i), true); \
+ __i++)
+
/* accommodate the difference between omap1 and omap2/3 */
static const struct iommu_functions *arch_iommu;
l->base = MMU_LOCK_BASE(val);
l->vict = MMU_LOCK_VICT(val);
- BUG_ON(l->base != 0); /* Currently no preservation is used */
}
static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
{
u32 val;
- BUG_ON(l->base != 0); /* Currently no preservation is used */
-
val = (l->base << MMU_LOCK_BASE_SHIFT);
val |= (l->vict << MMU_LOCK_VICT_SHIFT);
return arch_iommu->dump_cr(obj, cr, buf);
}
+/* only used in iotlb iteration for-loop */
+static struct cr_regs __iotlb_read_cr(struct iommu *obj, int n)
+{
+ struct cr_regs cr;
+ struct iotlb_lock l;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = n;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &cr);
+
+ return cr;
+}
+
/**
* load_iotlb_entry - Set an iommu tlb entry
* @obj: target iommu
**/
int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
{
- int i;
int err = 0;
struct iotlb_lock l;
struct cr_regs *cr;
clk_enable(obj->clk);
- for (i = 0; i < obj->nr_tlb_entries; i++) {
+ iotlb_lock_get(obj, &l);
+ if (l.base == obj->nr_tlb_entries) {
+ dev_warn(obj->dev, "%s: preserve entries full\n", __func__);
+ err = -EBUSY;
+ goto out;
+ }
+ if (!e->prsvd) {
+ int i;
struct cr_regs tmp;
+ for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, tmp)
+ if (!iotlb_cr_valid(&tmp))
+ break;
+
+ if (i == obj->nr_tlb_entries) {
+ dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+ err = -EBUSY;
+ goto out;
+ }
+
iotlb_lock_get(obj, &l);
- l.vict = i;
+ } else {
+ l.vict = l.base;
iotlb_lock_set(obj, &l);
- iotlb_read_cr(obj, &tmp);
- if (!iotlb_cr_valid(&tmp))
- break;
- }
-
- if (i == obj->nr_tlb_entries) {
- dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
- err = -EBUSY;
- goto out;
}
cr = iotlb_alloc_cr(obj, e);
iotlb_load_cr(obj, cr);
kfree(cr);
+ if (e->prsvd)
+ l.base++;
/* increment victim for next tlb load */
if (++l.vict == obj->nr_tlb_entries)
- l.vict = 0;
+ l.vict = l.base;
iotlb_lock_set(obj, &l);
out:
clk_disable(obj->clk);
**/
void flush_iotlb_page(struct iommu *obj, u32 da)
{
- struct iotlb_lock l;
int i;
+ struct cr_regs cr;
clk_enable(obj->clk);
- for (i = 0; i < obj->nr_tlb_entries; i++) {
- struct cr_regs cr;
+ for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, cr) {
u32 start;
size_t bytes;
- iotlb_lock_get(obj, &l);
- l.vict = i;
- iotlb_lock_set(obj, &l);
- iotlb_read_cr(obj, &cr);
if (!iotlb_cr_valid(&cr))
continue;
if ((start <= da) && (da < start + bytes)) {
dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
__func__, start, da, bytes);
- iotlb_load_cr(obj, &cr);
iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
}
}
static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num)
{
int i;
- struct iotlb_lock saved, l;
+ struct iotlb_lock saved;
+ struct cr_regs tmp;
struct cr_regs *p = crs;
clk_enable(obj->clk);
-
iotlb_lock_get(obj, &saved);
- memcpy(&l, &saved, sizeof(saved));
- for (i = 0; i < num; i++) {
- struct cr_regs tmp;
-
- iotlb_lock_get(obj, &l);
- l.vict = i;
- iotlb_lock_set(obj, &l);
- iotlb_read_cr(obj, &tmp);
+ for_each_iotlb_cr(obj, num, i, tmp) {
if (!iotlb_cr_valid(&tmp))
continue;
-
*p++ = tmp;
}
+
iotlb_lock_set(obj, &saved);
clk_disable(obj->clk);
{
u32 *iopgd = iopgd_offset(obj, da);
+ if ((da | pa) & ~IOSECTION_MASK) {
+ dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+ __func__, da, pa, IOSECTION_SIZE);
+ return -EINVAL;
+ }
+
*iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
flush_iopgd_range(iopgd, iopgd);
return 0;
u32 *iopgd = iopgd_offset(obj, da);
int i;
+ if ((da | pa) & ~IOSUPER_MASK) {
+ dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+ __func__, da, pa, IOSUPER_SIZE);
+ return -EINVAL;
+ }
+
for (i = 0; i < 16; i++)
*(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
flush_iopgd_range(iopgd, iopgd + 15);
u32 *iopte = iopte_alloc(obj, iopgd, da);
int i;
+ if ((da | pa) & ~IOLARGE_MASK) {
+ dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+ __func__, da, pa, IOLARGE_SIZE);
+ return -EINVAL;
+ }
+
if (IS_ERR(iopte))
return PTR_ERR(iopte);
prev_end = 0;
list_for_each_entry(tmp, &obj->mmap, list) {
- if ((prev_end <= start) && (start + bytes < tmp->da_start))
+ if (prev_end >= start)
+ break;
+
+ if (start + bytes < tmp->da_start)
goto found;
if (flags & IOVMF_DA_ANON)
- start = roundup(tmp->da_end, alignement);
+ start = roundup(tmp->da_end + 1, alignement);
prev_end = tmp->da_end;
}
- if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+ if ((start > prev_end) && (ULONG_MAX - start >= bytes))
goto found;
dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
* omap_device implementation
*
* Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
+ * Paul Walmsley, Kevin Hilman
*
* Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram
* Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
* Woodruff
*
}
#endif
+#ifdef CONFIG_ARCH_OMAP4
+int __init omap44xx_sram_init(void)
+{
+ printk(KERN_ERR "FIXME: %s not implemented\n", __func__);
+
+ return -ENODEV;
+}
+#else
+static inline int omap44xx_sram_init(void)
+{
+ return 0;
+}
+#endif
+
int __init omap_sram_init(void)
{
omap_detect_sram();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
else if (cpu_is_omap44xx())
- omap34xx_sram_init(); /* FIXME: */
+ omap44xx_sram_init();
return 0;
}
To compile this driver as a module, choose M here: the
module will be called altera_ps2.
+config SERIO_AMS_DELTA
+ tristate "Amstrad Delta (E3) mailboard support"
+ depends on MACH_AMS_DELTA
+ default y
+ select AMS_DELTA_FIQ
+ ---help---
+ Say Y here if you have an E3 and want to use its mailboard,
+ or any standard AT keyboard connected to the mailboard port.
+
+ When used for the E3 mailboard, a non-standard key table
+ must be loaded from userspace, possibly using udev extras
+ provided keymap helper utility.
+
+ To compile this driver as a module, choose M here;
+ the module will be called ams_delta_serio.
+
endif
obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o
obj-$(CONFIG_SERIO_LIBPS2) += libps2.o
obj-$(CONFIG_SERIO_RAW) += serio_raw.o
+obj-$(CONFIG_SERIO_AMS_DELTA) += ams_delta_serio.o
obj-$(CONFIG_SERIO_XILINX_XPS_PS2) += xilinx_ps2.o
obj-$(CONFIG_SERIO_ALTERA_PS2) += altera_ps2.o
--- /dev/null
+/*
+ * Amstrad E3 (Delta) keyboard port driver
+ *
+ * Copyright (c) 2006 Matt Callow
+ * Copyright (c) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Thanks to Cliff Lawson for his help
+ *
+ * The Amstrad Delta keyboard (aka mailboard) uses normal PC-AT style serial
+ * transmission. The keyboard port is formed of two GPIO lines, for clock
+ * and data. Due to strict timing requirements of the interface,
+ * the serial data stream is read and processed by a FIQ handler.
+ * The resulting words are fetched by this driver from a circular buffer.
+ *
+ * Standard AT keyboard driver (atkbd) is used for handling the keyboard data.
+ * However, when used with the E3 mailboard that producecs non-standard
+ * scancodes, a custom key table must be prepared and loaded from userspace.
+ */
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+
+#include <asm/mach-types.h>
+#include <plat/board-ams-delta.h>
+
+#include <mach/ams-delta-fiq.h>
+
+MODULE_AUTHOR("Matt Callow");
+MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver");
+MODULE_LICENSE("GPL");
+
+static struct serio *ams_delta_serio;
+
+static int check_data(int data)
+{
+ int i, parity = 0;
+
+ /* check valid stop bit */
+ if (!(data & 0x400)) {
+ dev_warn(&ams_delta_serio->dev,
+ "invalid stop bit, data=0x%X\n",
+ data);
+ return SERIO_FRAME;
+ }
+ /* calculate the parity */
+ for (i = 1; i < 10; i++) {
+ if (data & (1 << i))
+ parity++;
+ }
+ /* it should be odd */
+ if (!(parity & 0x01)) {
+ dev_warn(&ams_delta_serio->dev,
+ "paritiy check failed, data=0x%X parity=0x%X\n",
+ data, parity);
+ return SERIO_PARITY;
+ }
+ return 0;
+}
+
+static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
+{
+ int *circ_buff = &fiq_buffer[FIQ_CIRC_BUFF];
+ int data, dfl;
+ u8 scancode;
+
+ fiq_buffer[FIQ_IRQ_PEND] = 0;
+
+ /*
+ * Read data from the circular buffer, check it
+ * and then pass it on the serio
+ */
+ while (fiq_buffer[FIQ_KEYS_CNT] > 0) {
+
+ data = circ_buff[fiq_buffer[FIQ_HEAD_OFFSET]++];
+ fiq_buffer[FIQ_KEYS_CNT]--;
+ if (fiq_buffer[FIQ_HEAD_OFFSET] == fiq_buffer[FIQ_BUF_LEN])
+ fiq_buffer[FIQ_HEAD_OFFSET] = 0;
+
+ dfl = check_data(data);
+ scancode = (u8) (data >> 1) & 0xFF;
+ serio_interrupt(ams_delta_serio, scancode, dfl);
+ }
+ return IRQ_HANDLED;
+}
+
+static int ams_delta_serio_open(struct serio *serio)
+{
+ /* enable keyboard */
+ ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR,
+ AMD_DELTA_LATCH2_KEYBRD_PWR);
+
+ return 0;
+}
+
+static void ams_delta_serio_close(struct serio *serio)
+{
+ /* disable keyboard */
+ ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, 0);
+}
+
+static int __init ams_delta_serio_init(void)
+{
+ int err;
+
+ if (!machine_is_ams_delta())
+ return -ENODEV;
+
+ ams_delta_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+ if (!ams_delta_serio)
+ return -ENOMEM;
+
+ ams_delta_serio->id.type = SERIO_8042;
+ ams_delta_serio->open = ams_delta_serio_open;
+ ams_delta_serio->close = ams_delta_serio_close;
+ strlcpy(ams_delta_serio->name, "AMS DELTA keyboard adapter",
+ sizeof(ams_delta_serio->name));
+ strlcpy(ams_delta_serio->phys, "GPIO/serio0",
+ sizeof(ams_delta_serio->phys));
+
+ err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_DATA, "serio-data");
+ if (err) {
+ pr_err("ams_delta_serio: Couldn't request gpio pin for data\n");
+ goto serio;
+ }
+ gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+
+ err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_CLK, "serio-clock");
+ if (err) {
+ pr_err("ams_delta_serio: couldn't request gpio pin for clock\n");
+ goto gpio_data;
+ }
+ gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
+
+ err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
+ ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING,
+ "ams-delta-serio", 0);
+ if (err < 0) {
+ pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n",
+ gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
+ goto gpio_clk;
+ }
+ /*
+ * Since GPIO register handling for keyboard clock pin is performed
+ * at FIQ level, switch back from edge to simple interrupt handler
+ * to avoid bad interaction.
+ */
+ set_irq_handler(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
+ handle_simple_irq);
+
+ serio_register_port(ams_delta_serio);
+ dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name);
+
+ return 0;
+gpio_clk:
+ gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
+gpio_data:
+ gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+serio:
+ kfree(ams_delta_serio);
+ return err;
+}
+module_init(ams_delta_serio_init);
+
+static void __exit ams_delta_serio_exit(void)
+{
+ serio_unregister_port(ams_delta_serio);
+ free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
+ gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
+ gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+ kfree(ams_delta_serio);
+}
+module_exit(ams_delta_serio_exit);
This hooks up to the MicroWire controller on OMAP1 chips.
config SPI_OMAP24XX
- tristate "McSPI driver for OMAP24xx/OMAP34xx"
- depends on ARCH_OMAP2 || ARCH_OMAP3
+ tristate "McSPI driver for OMAP"
+ depends on ARCH_OMAP2PLUS
help
- SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
+ SPI master controller for OMAP24XX and later Multichannel SPI
(McSPI) modules.
config SPI_OMAP_100K
git.openpandora.org / pandora-kernel.git / commitdiff