starfire: delete non NAPI code from the driver.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1fe47a3..9f7442f 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1334,20 +1334,6 @@ config ADAPTEC_STARFIRE
          To compile this driver as a module, choose M here: the module
          will be called starfire.  This is recommended.
 
-config ADAPTEC_STARFIRE_NAPI
-       bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
-       depends on ADAPTEC_STARFIRE && EXPERIMENTAL
-       help
-         NAPI is a new driver API designed to reduce CPU and interrupt load
-         when the driver is receiving lots of packets from the card. It is
-         still somewhat experimental and thus not yet enabled by default.
-
-         If your estimated Rx load is 10kpps or more, or if the card will be
-         deployed on potentially unfriendly networks (e.g. in a firewall),
-         then say Y here.
-
-         If in doubt, say N.
-
 config AC3200
        tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
        depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL

diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 2038f38..1d2ef8f 100644 (file)
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -27,8 +27,8 @@
 */
 
 #define DRV_NAME       "starfire"
-#define DRV_VERSION    "2.0"
-#define DRV_RELDATE    "June 27, 2006"
+#define DRV_VERSION    "2.1"
+#define DRV_RELDATE    "July  6, 2008"
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -69,10 +69,6 @@
 #define VLAN_SUPPORT
 #endif
 
-#ifndef CONFIG_ADAPTEC_STARFIRE_NAPI
-#undef HAVE_NETDEV_POLL
-#endif
-
 /* The user-configurable values.
    These may be modified when a driver module is loaded.*/
 
@@ -177,44 +173,6 @@ static int full_duplex[MAX_UNITS] = {0, };
 #define skb_first_frag_len(skb)        skb_headlen(skb)
 #define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1)
 
-#ifdef HAVE_NETDEV_POLL
-#define init_poll(dev, np) \
-       netif_napi_add(dev, &np->napi, netdev_poll, max_interrupt_work)
-#define netdev_rx(dev, np, ioaddr) \
-do { \
-       u32 intr_enable; \
-       if (netif_rx_schedule_prep(dev, &np->napi)) { \
-               __netif_rx_schedule(dev, &np->napi); \
-               intr_enable = readl(ioaddr + IntrEnable); \
-               intr_enable &= ~(IntrRxDone | IntrRxEmpty); \
-               writel(intr_enable, ioaddr + IntrEnable); \
-               readl(ioaddr + IntrEnable); /* flush PCI posting buffers */ \
-       } else { \
-               /* Paranoia check */ \
-               intr_enable = readl(ioaddr + IntrEnable); \
-               if (intr_enable & (IntrRxDone | IntrRxEmpty)) { \
-                       printk(KERN_INFO "%s: interrupt while in polling mode!\n", dev->name); \
-                       intr_enable &= ~(IntrRxDone | IntrRxEmpty); \
-                       writel(intr_enable, ioaddr + IntrEnable); \
-               } \
-       } \
-} while (0)
-#define netdev_receive_skb(skb) netif_receive_skb(skb)
-#define vlan_netdev_receive_skb(skb, vlgrp, vlid) vlan_hwaccel_receive_skb(skb, vlgrp, vlid)
-static int     netdev_poll(struct napi_struct *napi, int budget);
-#else  /* not HAVE_NETDEV_POLL */
-#define init_poll(dev, np)
-#define netdev_receive_skb(skb) netif_rx(skb)
-#define vlan_netdev_receive_skb(skb, vlgrp, vlid) vlan_hwaccel_rx(skb, vlgrp, vlid)
-#define netdev_rx(dev, np, ioaddr) \
-do { \
-       int quota = np->dirty_rx + RX_RING_SIZE - np->cur_rx; \
-       __netdev_rx(dev, &quota);\
-} while (0)
-#endif /* not HAVE_NETDEV_POLL */
-/* end of compatibility code */
-
-
 /* These identify the driver base version and may not be removed. */
 static char version[] =
 KERN_INFO "starfire.c:v1.03 7/26/2000  Written by Donald Becker <becker@scyld.com>\n"
@@ -635,6 +593,7 @@ static int  start_tx(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t intr_handler(int irq, void *dev_instance);
 static void    netdev_error(struct net_device *dev, int intr_status);
 static int     __netdev_rx(struct net_device *dev, int *quota);
+static int     netdev_poll(struct napi_struct *napi, int budget);
 static void    refill_rx_ring(struct net_device *dev);
 static void    netdev_error(struct net_device *dev, int intr_status);
 static void    set_rx_mode(struct net_device *dev);
@@ -851,7 +810,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
        dev->hard_start_xmit = &start_tx;
        dev->tx_timeout = tx_timeout;
        dev->watchdog_timeo = TX_TIMEOUT;
-       init_poll(dev, np);
+       netif_napi_add(dev, &np->napi, netdev_poll, max_interrupt_work);
        dev->stop = &netdev_close;
        dev->get_stats = &get_stats;
        dev->set_multicast_list = &set_rx_mode;
@@ -1054,9 +1013,8 @@ static int netdev_open(struct net_device *dev)
 
        writel(np->intr_timer_ctrl, ioaddr + IntrTimerCtrl);
 
-#ifdef HAVE_NETDEV_POLL
        napi_enable(&np->napi);
-#endif
+
        netif_start_queue(dev);
 
        if (debug > 1)
@@ -1330,8 +1288,28 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 
                handled = 1;
 
-               if (intr_status & (IntrRxDone | IntrRxEmpty))
-                       netdev_rx(dev, np, ioaddr);
+               if (intr_status & (IntrRxDone | IntrRxEmpty)) {
+                       u32 enable;
+
+                       if (likely(netif_rx_schedule_prep(dev, &np->napi))) {
+                               __netif_rx_schedule(dev, &np->napi);
+                               enable = readl(ioaddr + IntrEnable);
+                               enable &= ~(IntrRxDone | IntrRxEmpty);
+                               writel(enable, ioaddr + IntrEnable);
+                               /* flush PCI posting buffers */
+                               readl(ioaddr + IntrEnable);
+                       } else {
+                               /* Paranoia check */
+                               enable = readl(ioaddr + IntrEnable);
+                               if (enable & (IntrRxDone | IntrRxEmpty)) {
+                                       printk(KERN_INFO
+                                              "%s: interrupt while in poll!\n",
+                                              dev->name);
+                                       enable &= ~(IntrRxDone | IntrRxEmpty);
+                                       writel(enable, ioaddr + IntrEnable);
+                               }
+                       }
+               }
 
                /* Scavenge the skbuff list based on the Tx-done queue.
                   There are redundant checks here that may be cleaned up
@@ -1411,8 +1389,10 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 }
 
 
-/* This routine is logically part of the interrupt/poll handler, but separated
-   for clarity, code sharing between NAPI/non-NAPI, and better register allocation. */
+/*
+ * This routine is logically part of the interrupt/poll handler, but separated
+ * for clarity and better register allocation.
+ */
 static int __netdev_rx(struct net_device *dev, int *quota)
 {
        struct netdev_private *np = netdev_priv(dev);
@@ -1507,13 +1487,20 @@ static int __netdev_rx(struct net_device *dev, int *quota)
                }
 #ifdef VLAN_SUPPORT
                if (np->vlgrp && le16_to_cpu(desc->status2) & 0x0200) {
-                       if (debug > 4)
-                               printk(KERN_DEBUG "  netdev_rx() vlanid = %d\n", le16_to_cpu(desc->vlanid));
-                       /* vlan_netdev_receive_skb() expects a packet with the VLAN tag stripped out */
-                       vlan_netdev_receive_skb(skb, np->vlgrp, le16_to_cpu(desc->vlanid));
+                       u16 vlid = le16_to_cpu(desc->vlanid);
+
+                       if (debug > 4) {
+                               printk(KERN_DEBUG "  netdev_rx() vlanid = %d\n",
+                                      vlid);
+                       }
+                       /*
+                        * vlan_hwaccel_rx expects a packet with the VLAN tag
+                        * stripped out.
+                        */
+                       vlan_hwaccel_rx(skb, np->vlgrp, vlid);
                } else
 #endif /* VLAN_SUPPORT */
-                       netdev_receive_skb(skb);
+                       netif_receive_skb(skb);
                dev->last_rx = jiffies;
                np->stats.rx_packets++;
 
@@ -1532,8 +1519,6 @@ static int __netdev_rx(struct net_device *dev, int *quota)
        return retcode;
 }
 
-
-#ifdef HAVE_NETDEV_POLL
 static int netdev_poll(struct napi_struct *napi, int budget)
 {
        struct netdev_private *np = container_of(napi, struct netdev_private, napi);
@@ -1564,8 +1549,6 @@ static int netdev_poll(struct napi_struct *napi, int budget)
        /* Restart Rx engine if stopped. */
        return budget - quota;
 }
-#endif /* HAVE_NETDEV_POLL */
-
 
 static void refill_rx_ring(struct net_device *dev)
 {
@@ -1906,9 +1889,8 @@ static int netdev_close(struct net_device *dev)
        int i;
 
        netif_stop_queue(dev);
-#ifdef HAVE_NETDEV_POLL
+
        napi_disable(&np->napi);
-#endif
 
        if (debug > 1) {
                printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n",
@@ -2044,11 +2026,8 @@ static int __init starfire_init (void)
 /* when a module, this is printed whether or not devices are found in probe */
 #ifdef MODULE
        printk(version);
-#ifdef HAVE_NETDEV_POLL
+
        printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n");
-#else
-       printk(KERN_INFO DRV_NAME ": polling (NAPI) disabled\n");
-#endif
 #endif
 
        /* we can do this test only at run-time... sigh */