ARM: OMAP3: igep0020: Adapt to ehci-omap changes

Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY devices.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index bf92678..95ccec0 100644 (file)
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -527,26 +527,28 @@ static void __init igep_i2c_init(void)
        omap3_pmic_init("twl4030", &igep_twldata);
 }
 
+static struct usbhs_phy_data igep2_phy_data[] __initdata = {
+       {
+               .port = 1,
+               .reset_gpio = IGEP2_GPIO_USBH_NRESET,
+               .vcc_gpio = -EINVAL,
+       },
+};
+
+static struct usbhs_phy_data igep3_phy_data[] __initdata = {
+       {
+               .port = 2,
+               .reset_gpio = IGEP3_GPIO_USBH_NRESET,
+               .vcc_gpio = -EINVAL,
+       },
+};
+
 static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-       .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-       .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-       .phy_reset = true,
-       .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
-       .reset_gpio_port[1] = -EINVAL,
-       .reset_gpio_port[2] = -EINVAL,
 };
 
 static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
-       .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
        .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-       .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-       .phy_reset = true,
-       .reset_gpio_port[0] = -EINVAL,
-       .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET,
-       .reset_gpio_port[2] = -EINVAL,
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -642,8 +644,10 @@ static void __init igep_init(void)
        if (machine_is_igep0020()) {
                omap_display_init(&igep2_dss_data);
                igep2_init_smsc911x();
+               usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
                usbhs_init(&igep2_usbhs_bdata);
        } else {
+               usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
                usbhs_init(&igep3_usbhs_bdata);
        }
 }