[TG3]: Eliminate the TG3_FLAG_5701_REG_WRITE_BUG flag.
authorMatt Carlson <mcarlson@broadcom.com>
Sat, 5 May 2007 19:47:25 +0000 (12:47 -0700)
committerDavid S. Miller <davem@davemloft.net>
Sat, 5 May 2007 19:47:25 +0000 (12:47 -0700)
This patch removes the use of the TG3_FLAG_5701_REG_WRITE_BUG flag.
It's logic is only used to set a function pointer and thus the
logic can be collapsed and the flag removed.

[ Comment tidy by Christoph Hellwig. -DaveM ]

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
drivers/net/tg3.c
drivers/net/tg3.h

index ff157b7..4154e12 100644 (file)
@@ -10673,17 +10673,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
        if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5700_BX)
                tp->tg3_flags |= TG3_FLAG_TXD_MBOX_HWBUG;
 
-       /* Back to back register writes can cause problems on this chip,
-        * the workaround is to read back all reg writes except those to
-        * mailbox regs.  See tg3_write_indirect_reg32().
-        *
-        * PCI Express 5750_A0 rev chips need this workaround too.
-        */
-       if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 ||
-           ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
-            tp->pci_chip_rev_id == CHIPREV_ID_5750_A0))
-               tp->tg3_flags |= TG3_FLAG_5701_REG_WRITE_BUG;
-
        if ((pci_state_reg & PCISTATE_BUS_SPEED_HIGH) != 0)
                tp->tg3_flags |= TG3_FLAG_PCI_HIGH_SPEED;
        if ((pci_state_reg & PCISTATE_BUS_32BIT) != 0)
@@ -10707,8 +10696,19 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
        /* Various workaround register access methods */
        if (tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG)
                tp->write32 = tg3_write_indirect_reg32;
-       else if (tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG)
+       else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 ||
+                ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
+                 tp->pci_chip_rev_id == CHIPREV_ID_5750_A0)) {
+               /*
+                * Back to back register writes can cause problems on these
+                * chips, the workaround is to read back all reg writes
+                * except those to mailbox regs.
+                *
+                * See tg3_write_indirect_reg32().
+                */
                tp->write32 = tg3_write_flush_reg32;
+       }
+
 
        if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
            (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
index dd04a46..c52acb0 100644 (file)
@@ -2199,7 +2199,6 @@ struct tg3 {
 #define TG3_FLAG_USE_LINKCHG_REG       0x00000008
 #define TG3_FLAG_USE_MI_INTERRUPT      0x00000010
 #define TG3_FLAG_ENABLE_ASF            0x00000020
-#define TG3_FLAG_5701_REG_WRITE_BUG    0x00000040
 #define TG3_FLAG_POLL_SERDES           0x00000080
 #define TG3_FLAG_MBOX_WRITE_REORDER    0x00000100
 #define TG3_FLAG_PCIX_TARGET_HWBUG     0x00000200