[SCSI] isci: Fix task management for SMP, SATA and on dev remove.

libsas uses the LLDD abort task interface to handle I/O timeouts
in the SATA/STP and SMP discovery paths, so this change will terminate
STP/SMP requests. Also, if the device is gone, the lldd will prevent
libsas from further escalations in the error handler.

Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index fbf9ce2..20c77ed 100644 (file)
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -1438,53 +1438,6 @@ int isci_remote_device_found(struct domain_device *domain_dev)
 
        return status == SCI_SUCCESS ? 0 : -ENODEV;
 }
-/**
- * isci_device_is_reset_pending() - This function will check if there is any
- *    pending reset condition on the device.
- * @request: This parameter is the isci_device object.
- *
- * true if there is a reset pending for the device.
- */
-bool isci_device_is_reset_pending(
-       struct isci_host *isci_host,
-       struct isci_remote_device *isci_device)
-{
-       struct isci_request *isci_request;
-       struct isci_request *tmp_req;
-       bool reset_is_pending = false;
-       unsigned long flags;
-
-       dev_dbg(&isci_host->pdev->dev,
-               "%s: isci_device = %p\n", __func__, isci_device);
-
-       spin_lock_irqsave(&isci_host->scic_lock, flags);
-
-       /* Check for reset on all pending requests. */
-       list_for_each_entry_safe(isci_request, tmp_req,
-                                &isci_device->reqs_in_process, dev_node) {
-               dev_dbg(&isci_host->pdev->dev,
-                       "%s: isci_device = %p request = %p\n",
-                       __func__, isci_device, isci_request);
-
-               if (isci_request->ttype == io_task) {
-                       struct sas_task *task = isci_request_access_task(
-                               isci_request);
-
-                       spin_lock(&task->task_state_lock);
-                       if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
-                               reset_is_pending = true;
-                       spin_unlock(&task->task_state_lock);
-               }
-       }
-
-       spin_unlock_irqrestore(&isci_host->scic_lock, flags);
-
-       dev_dbg(&isci_host->pdev->dev,
-               "%s: isci_device = %p reset_is_pending = %d\n",
-               __func__, isci_device, reset_is_pending);
-
-       return reset_is_pending;
-}
 
 /**
  * isci_device_clear_reset_pending() - This function will clear if any pending

diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index e1747ea..bee6dd2 100644 (file)
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -132,8 +132,6 @@ void isci_remote_device_nuke_requests(struct isci_host *ihost,
                                      struct isci_remote_device *idev);
 void isci_remote_device_gone(struct domain_device *domain_dev);
 int isci_remote_device_found(struct domain_device *domain_dev);
-bool isci_device_is_reset_pending(struct isci_host *ihost,
-                                 struct isci_remote_device *idev);
 void isci_device_clear_reset_pending(struct isci_host *ihost,
                                     struct isci_remote_device *idev);
 /**

diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index c1f439b..ec85beb 100644 (file)
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -920,22 +920,14 @@ int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun)
                "%s: domain_device=%p, isci_host=%p; isci_device=%p\n",
                 __func__, domain_device, isci_host, isci_device);
 
-       if (isci_device)
-               set_bit(IDEV_EH, &isci_device->flags);
+       if (!isci_device) {
+               /* If the device is gone, stop the escalations. */
+               dev_dbg(&isci_host->pdev->dev, "%s: No dev\n", __func__);
 
-       /* If there is a device reset pending on any request in the
-        * device's list, fail this LUN reset request in order to
-        * escalate to the device reset.
-        */
-       if (!isci_device ||
-           isci_device_is_reset_pending(isci_host, isci_device)) {
-               dev_dbg(&isci_host->pdev->dev,
-                        "%s: No dev (%p), or "
-                        "RESET PENDING: domain_device=%p\n",
-                        __func__, isci_device, domain_device);
-               ret = TMF_RESP_FUNC_FAILED;
+               ret = TMF_RESP_FUNC_COMPLETE;
                goto out;
        }
+       set_bit(IDEV_EH, &isci_device->flags);
 
        /* Send the task management part of the reset. */
        if (sas_protocol_ata(domain_device->tproto)) {
@@ -1044,7 +1036,7 @@ int isci_task_abort_task(struct sas_task *task)
        struct isci_tmf           tmf;
        int                       ret = TMF_RESP_FUNC_FAILED;
        unsigned long             flags;
-       bool                      any_dev_reset = false;
+       int                       perform_termination = 0;
 
        /* Get the isci_request reference from the task.  Note that
         * this check does not depend on the pending request list
@@ -1066,89 +1058,34 @@ int isci_task_abort_task(struct sas_task *task)
        spin_unlock_irqrestore(&isci_host->scic_lock, flags);
 
        dev_dbg(&isci_host->pdev->dev,
-               "%s: task = %p\n", __func__, task);
-
-       if (!isci_device || !old_request)
-               goto out;
+               "%s: dev = %p, task = %p, old_request == %p\n",
+               __func__, isci_device, task, old_request);
 
-       set_bit(IDEV_EH, &isci_device->flags);
-
-       /* This version of the driver will fail abort requests for
-        * SATA/STP.  Failing the abort request this way will cause the
-        * SCSI error handler thread to escalate to LUN reset
-        */
-       if (sas_protocol_ata(task->task_proto)) {
-               dev_dbg(&isci_host->pdev->dev,
-                           " task %p is for a STP/SATA device;"
-                           " returning TMF_RESP_FUNC_FAILED\n"
-                           " to cause a LUN reset...\n", task);
-               goto out;
-       }
-
-       dev_dbg(&isci_host->pdev->dev,
-               "%s: old_request == %p\n", __func__, old_request);
-
-       any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device);
-
-       spin_lock_irqsave(&task->task_state_lock, flags);
-
-       any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET);
+       if (isci_device)
+               set_bit(IDEV_EH, &isci_device->flags);
 
-       /* If the extraction of the request reference from the task
-        * failed, then the request has been completed (or if there is a
-        * pending reset then this abort request function must be failed
-        * in order to escalate to the target reset).
+       /* Device reset conditions signalled in task_state_flags are the
+        * responsbility of libsas to observe at the start of the error
+        * handler thread.
         */
-       if ((old_request == NULL) || any_dev_reset) {
-
-               /* If the device reset task flag is set, fail the task
-                * management request.  Otherwise, the original request
-                * has completed.
-                */
-               if (any_dev_reset) {
-
-                       /* Turn off the task's DONE to make sure this
-                        * task is escalated to a target reset.
-                        */
-                       task->task_state_flags &= ~SAS_TASK_STATE_DONE;
-
-                       /* Make the reset happen as soon as possible. */
-                       task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
-
-                       spin_unlock_irqrestore(&task->task_state_lock, flags);
-
-                       /* Fail the task management request in order to
-                        * escalate to the target reset.
-                        */
-                       ret = TMF_RESP_FUNC_FAILED;
-
-                       dev_dbg(&isci_host->pdev->dev,
-                               "%s: Failing task abort in order to "
-                               "escalate to target reset because\n"
-                               "SAS_TASK_NEED_DEV_RESET is set for "
-                               "task %p on dev %p\n",
-                               __func__, task, isci_device);
-
-
-               } else {
-                       /* The request has already completed and there
-                        * is nothing to do here other than to set the task
-                        * done bit, and indicate that the task abort function
-                        * was sucessful.
-                        */
-                       isci_set_task_doneflags(task);
-
-                       spin_unlock_irqrestore(&task->task_state_lock, flags);
+       if (!isci_device || !old_request) {
+               /* The request has already completed and there
+               * is nothing to do here other than to set the task
+               * done bit, and indicate that the task abort function
+               * was sucessful.
+               */
+               spin_lock_irqsave(&task->task_state_lock, flags);
+               task->task_state_flags |= SAS_TASK_STATE_DONE;
+               task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+                                           SAS_TASK_STATE_PENDING);
+               spin_unlock_irqrestore(&task->task_state_lock, flags);
 
-                       ret = TMF_RESP_FUNC_COMPLETE;
+               ret = TMF_RESP_FUNC_COMPLETE;
 
-                       dev_dbg(&isci_host->pdev->dev,
-                               "%s: abort task not needed for %p\n",
-                               __func__, task);
-               }
+               dev_dbg(&isci_host->pdev->dev,
+                       "%s: abort task not needed for %p\n",
+                       __func__, task);
                goto out;
-       } else {
-               spin_unlock_irqrestore(&task->task_state_lock, flags);
        }
 
        spin_lock_irqsave(&isci_host->scic_lock, flags);
@@ -1177,24 +1114,44 @@ int isci_task_abort_task(struct sas_task *task)
                goto out;
        }
        if (task->task_proto == SAS_PROTOCOL_SMP ||
+           sas_protocol_ata(task->task_proto) ||
            test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
 
                spin_unlock_irqrestore(&isci_host->scic_lock, flags);
 
                dev_dbg(&isci_host->pdev->dev,
-                       "%s: SMP request (%d)"
+                       "%s: %s request"
                        " or complete_in_target (%d), thus no TMF\n",
-                       __func__, (task->task_proto == SAS_PROTOCOL_SMP),
+                       __func__,
+                       ((task->task_proto == SAS_PROTOCOL_SMP)
+                               ? "SMP"
+                               : (sas_protocol_ata(task->task_proto)
+                                       ? "SATA/STP"
+                                       : "<other>")
+                        ),
                        test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags));
 
-               /* Set the state on the task. */
-               isci_task_all_done(task);
-
-               ret = TMF_RESP_FUNC_COMPLETE;
+               if (test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
+                       spin_lock_irqsave(&task->task_state_lock, flags);
+                       task->task_state_flags |= SAS_TASK_STATE_DONE;
+                       task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+                                                   SAS_TASK_STATE_PENDING);
+                       spin_unlock_irqrestore(&task->task_state_lock, flags);
+                       ret = TMF_RESP_FUNC_COMPLETE;
+               } else {
+                       spin_lock_irqsave(&task->task_state_lock, flags);
+                       task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+                                                   SAS_TASK_STATE_PENDING);
+                       spin_unlock_irqrestore(&task->task_state_lock, flags);
+               }
 
-               /* Stopping and SMP devices are not sent a TMF, and are not
-                * reset, but the outstanding I/O request is terminated below.
+               /* STP and SMP devices are not sent a TMF, but the
+                * outstanding I/O request is terminated below.  This is
+                * because SATA/STP and SMP discovery path timeouts directly
+                * call the abort task interface for cleanup.
                 */
+               perform_termination = 1;
+
        } else {
                /* Fill in the tmf stucture */
                isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
@@ -1203,22 +1160,24 @@ int isci_task_abort_task(struct sas_task *task)
 
                spin_unlock_irqrestore(&isci_host->scic_lock, flags);
 
-               #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */
+               #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */
                ret = isci_task_execute_tmf(isci_host, isci_device, &tmf,
                                            ISCI_ABORT_TASK_TIMEOUT_MS);
 
-               if (ret != TMF_RESP_FUNC_COMPLETE)
+               if (ret == TMF_RESP_FUNC_COMPLETE)
+                       perform_termination = 1;
+               else
                        dev_dbg(&isci_host->pdev->dev,
-                               "%s: isci_task_send_tmf failed\n",
-                               __func__);
+                               "%s: isci_task_send_tmf failed\n", __func__);
        }
-       if (ret == TMF_RESP_FUNC_COMPLETE) {
+       if (perform_termination) {
                set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags);
 
                /* Clean up the request on our side, and wait for the aborted
                 * I/O to complete.
                 */
-               isci_terminate_request_core(isci_host, isci_device, old_request);
+               isci_terminate_request_core(isci_host, isci_device,
+                                           old_request);
        }
 
        /* Make sure we do not leave a reference to aborted_io_completion */

diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h
index c9ccd0b..bc78c0a 100644 (file)
--- a/drivers/scsi/isci/task.h
+++ b/drivers/scsi/isci/task.h
@@ -226,35 +226,6 @@ enum isci_completion_selection {
        isci_perform_error_io_completion        /* Use sas_task_abort */
 };
 
-static inline void isci_set_task_doneflags(
-       struct sas_task *task)
-{
-       /* Since no futher action will be taken on this task,
-        * make sure to mark it complete from the lldd perspective.
-        */
-       task->task_state_flags |= SAS_TASK_STATE_DONE;
-       task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
-       task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
-}
-/**
- * isci_task_all_done() - This function clears the task bits to indicate the
- *    LLDD is done with the task.
- *
- *
- */
-static inline void isci_task_all_done(
-       struct sas_task *task)
-{
-       unsigned long flags;
-
-       /* Since no futher action will be taken on this task,
-        * make sure to mark it complete from the lldd perspective.
-        */
-       spin_lock_irqsave(&task->task_state_lock, flags);
-       isci_set_task_doneflags(task);
-       spin_unlock_irqrestore(&task->task_state_lock, flags);
-}
-
 /**
  * isci_task_set_completion_status() - This function sets the completion status
  *    for the request.
@@ -336,7 +307,9 @@ isci_task_set_completion_status(
                /* Fall through to the normal case... */
        case isci_perform_normal_io_completion:
                /* Normal notification (task_done) */
-               isci_set_task_doneflags(task);
+               task->task_state_flags |= SAS_TASK_STATE_DONE;
+               task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR |
+                                           SAS_TASK_STATE_PENDING);
                break;
        default:
                WARN_ONCE(1, "unknown task_notification_selection: %d\n",