/*
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
}
EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
+void rt2800_txdone(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+ struct queue_entry *entry;
+ __le32 *txwi;
+ struct txdone_entry_desc txdesc;
+ u32 word;
+ u32 reg;
+ int wcid, ack, pid, tx_wcid, tx_ack, tx_pid;
+ u16 mcs, real_mcs;
+ int i;
+
+ /*
+ * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
+ * at most X times and also stop processing once the TX_STA_FIFO_VALID
+ * flag is not set anymore.
+ *
+ * The legacy drivers use X=TX_RING_SIZE but state in a comment
+ * that the TX_STA_FIFO stack has a size of 16. We stick to our
+ * tx ring size for now.
+ */
+ for (i = 0; i < TX_ENTRIES; i++) {
+ rt2800_register_read(rt2x00dev, TX_STA_FIFO, ®);
+ if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
+ break;
+
+ wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
+ ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
+ pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
+
+ /*
+ * Skip this entry when it contains an invalid
+ * queue identication number.
+ */
+ if (pid <= 0 || pid > QID_RX)
+ continue;
+
+ queue = rt2x00queue_get_queue(rt2x00dev, pid - 1);
+ if (unlikely(!queue))
+ continue;
+
+ /*
+ * Inside each queue, we process each entry in a chronological
+ * order. We first check that the queue is not empty.
+ */
+ entry = NULL;
+ while (!rt2x00queue_empty(queue)) {
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+ if (!test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ break;
+
+ rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
+ }
+
+ if (!entry || rt2x00queue_empty(queue))
+ break;
+
+ /*
+ * Check if we got a match by looking at WCID/ACK/PID
+ * fields
+ */
+ txwi = rt2800_drv_get_txwi(entry);
+
+ rt2x00_desc_read(txwi, 1, &word);
+ tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
+ tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK);
+ tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID);
+
+ if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid))
+ WARNING(rt2x00dev, "invalid TX_STA_FIFO content");
+
+ /*
+ * Obtain the status about this packet.
+ */
+ txdesc.flags = 0;
+ rt2x00_desc_read(txwi, 0, &word);
+ mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
+ mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
+ real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
+
+ /*
+ * Ralink has a retry mechanism using a global fallback
+ * table. We setup this fallback table to try the immediate
+ * lower rate for all rates. In the TX_STA_FIFO, the MCS field
+ * always contains the MCS used for the last transmission, be
+ * it successful or not.
+ */
+ if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) {
+ /*
+ * Transmission succeeded. The number of retries is
+ * mcs - real_mcs
+ */
+ __set_bit(TXDONE_SUCCESS, &txdesc.flags);
+ txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0);
+ } else {
+ /*
+ * Transmission failed. The number of retries is
+ * always 7 in this case (for a total number of 8
+ * frames sent).
+ */
+ __set_bit(TXDONE_FAILURE, &txdesc.flags);
+ txdesc.retry = rt2x00dev->long_retry;
+ }
+
+ /*
+ * the frame was retried at least once
+ * -> hw used fallback rates
+ */
+ if (txdesc.retry)
+ __set_bit(TXDONE_FALLBACK, &txdesc.flags);
+
+ rt2x00lib_txdone(entry, &txdesc);
+ }
+}
+EXPORT_SYMBOL_GPL(rt2800_txdone);
+
void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
/*
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+ Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Bartlomiej Zolnierkiewicz
This program is free software; you can redistribute it and/or modify
struct txentry_desc *txdesc);
void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc);
+void rt2800_txdone(struct rt2x00_dev *rt2x00dev);
+
void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
extern const struct rt2x00debug rt2800_rt2x00debug;
/*
- Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
/*
* Interrupt functions.
*/
-static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
-{
- struct data_queue *queue;
- struct queue_entry *entry;
- __le32 *txwi;
- struct txdone_entry_desc txdesc;
- u32 word;
- u32 reg;
- int wcid, ack, pid, tx_wcid, tx_ack, tx_pid;
- u16 mcs, real_mcs;
- int i;
-
- /*
- * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
- * at most X times and also stop processing once the TX_STA_FIFO_VALID
- * flag is not set anymore.
- *
- * The legacy drivers use X=TX_RING_SIZE but state in a comment
- * that the TX_STA_FIFO stack has a size of 16. We stick to our
- * tx ring size for now.
- */
- for (i = 0; i < TX_ENTRIES; i++) {
- rt2800_register_read(rt2x00dev, TX_STA_FIFO, ®);
- if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
- break;
-
- wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
- ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
- pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
-
- /*
- * Skip this entry when it contains an invalid
- * queue identication number.
- */
- if (pid <= 0 || pid > QID_RX)
- continue;
-
- queue = rt2x00queue_get_queue(rt2x00dev, pid - 1);
- if (unlikely(!queue))
- continue;
-
- /*
- * Inside each queue, we process each entry in a chronological
- * order. We first check that the queue is not empty.
- */
- if (rt2x00queue_empty(queue))
- continue;
- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-
- /* Check if we got a match by looking at WCID/ACK/PID
- * fields */
- txwi = (__le32 *) entry->skb->data;
-
- rt2x00_desc_read(txwi, 1, &word);
- tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
- tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK);
- tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID);
-
- if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid))
- WARNING(rt2x00dev, "invalid TX_STA_FIFO content\n");
-
- /*
- * Obtain the status about this packet.
- */
- txdesc.flags = 0;
- rt2x00_desc_read(txwi, 0, &word);
- mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
- real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
-
- /*
- * Ralink has a retry mechanism using a global fallback
- * table. We setup this fallback table to try the immediate
- * lower rate for all rates. In the TX_STA_FIFO, the MCS field
- * always contains the MCS used for the last transmission, be
- * it successful or not.
- */
- if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) {
- /*
- * Transmission succeeded. The number of retries is
- * mcs - real_mcs
- */
- __set_bit(TXDONE_SUCCESS, &txdesc.flags);
- txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0);
- } else {
- /*
- * Transmission failed. The number of retries is
- * always 7 in this case (for a total number of 8
- * frames sent).
- */
- __set_bit(TXDONE_FAILURE, &txdesc.flags);
- txdesc.retry = 7;
- }
-
- /*
- * the frame was retried at least once
- * -> hw used fallback rates
- */
- if (txdesc.retry)
- __set_bit(TXDONE_FALLBACK, &txdesc.flags);
-
- rt2x00lib_txdone(entry, &txdesc);
- }
-}
-
static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev)
{
struct ieee80211_conf conf = { .flags = 0 };
* 4 - Tx done interrupt.
*/
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
- rt2800pci_txdone(rt2x00dev);
+ rt2800_txdone(rt2x00dev);
/*
* 5 - Auto wakeup interrupt.
/*
- Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+ Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
return length;
}
+/*
+ * TX control handlers
+ */
+static void rt2800usb_work_txdone(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, txdone_work);
+ struct data_queue *queue;
+ struct queue_entry *entry;
+
+ rt2800_txdone(rt2x00dev);
+
+ /*
+ * Process any trailing TX status reports for IO failures,
+ * we loop until we find the first non-IO error entry. This
+ * can either be a frame which is free, is being uploaded,
+ * or has completed the upload but didn't have an entry
+ * in the TX_STAT_FIFO register yet.
+ */
+ tx_queue_for_each(rt2x00dev, queue) {
+ while (!rt2x00queue_empty(queue)) {
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+ !test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ break;
+
+ rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
+ }
+ }
+}
+
/*
* RX control handlers
*/
*/
rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+ /*
+ * Overwrite TX done handler
+ */
+ PREPARE_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
+
return 0;
}
git.openpandora.org / pandora-kernel.git / commitdiff