m68k: drop unused Kconfig symbols

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index d964dc4..dbff941 100644 (file)
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -77,32 +77,6 @@ config MULTIFACE_III_TTY
 
          To compile this driver as a module, choose M here.
 
-config GVPIOEXT
-       tristate "GVP IO-Extender support"
-       depends on PARPORT=n && ZORRO
-       help
-         If you want to use a GVP IO-Extender serial card in Linux, say Y.
-         Otherwise, say N.
-
-config GVPIOEXT_LP
-       tristate "GVP IO-Extender parallel printer support"
-       depends on GVPIOEXT
-       help
-         Say Y to enable driving a printer from the parallel port on your
-         GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
-       tristate "GVP IO-Extender PLIP support"
-       depends on GVPIOEXT
-       help
-         Say Y to enable doing IP over the parallel port on your GVP
-         IO-Extender card, N otherwise.
-
-config MAC_HID
-       bool
-       depends on INPUT_ADBHID
-       default y
-
 config HPDCA
        tristate "HP DCA serial support"
        depends on DIO && SERIAL_8250
@@ -145,7 +119,7 @@ config DN_SERIAL
 
 config SERIAL_CONSOLE
        bool "Support for serial port console"
-       depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+       depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
        ---help---
          If you say Y here, it will be possible to use a serial port as the
          system console (the system console is the device which receives all

diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 7d5c20b..ef4a26a 100644 (file)
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -303,9 +303,6 @@ config COBRA5282
        help
          Support for the senTec COBRA5282 board.
 
-config EMAC_INC
-       bool
-
 config SOM5282EM
        bool "EMAC.Inc SOM5282EM board support"
        depends on M528x
@@ -371,27 +368,21 @@ config FIREBEE
        help
          Support for the FireBee ColdFire 5475 based board.
 
-config HW_FEITH
-       bool
-
 config CLEOPATRA
        bool "Feith CLEOPATRA board support"
        depends on (M5307 || M5407)
-       select HW_FEITH
        help
          Support for the Feith Cleopatra boards.
 
 config CANCam
        bool "Feith CANCam board support"
        depends on M5272
-       select HW_FEITH
        help
          Support for the Feith CANCam board.
 
 config SCALES
        bool "Feith SCALES board support"
        depends on M5272
-       select HW_FEITH
        help
          Support for the Feith SCALES board.
 
@@ -438,13 +429,6 @@ if !MMU || COLDFIRE
 
 comment "Machine Options"
 
-config ROMFS_FROM_ROM
-       bool "ROMFS image not RAM resident"
-       depends on (NETtel || SNAPGEAR)
-       help
-         The ROMfs filesystem will stay resident in the FLASH/ROM, not be
-         moved into RAM.
-
 config UBOOT
        bool "Support for U-Boot command line parameters"
        help
@@ -524,33 +508,6 @@ config KERNELBASE
          a system with the RAM based at address 0, and leaving enough room
          for the theoretical maximum number of 256 vectors.
 
-choice
-       prompt "RAM bus width"
-       default RAMAUTOBIT
-
-config RAMAUTOBIT
-       bool "AUTO"
-       help
-         Select the physical RAM data bus size. Not needed on most platforms,
-         so you can generally choose AUTO.
-
-config RAM8BIT
-       bool "8bit"
-       help
-         Configure RAM bus to be 8 bits wide.
-
-config RAM16BIT
-       bool "16bit"
-       help
-         Configure RAM bus to be 16 bits wide.
-
-config RAM32BIT
-       bool "32bit"
-       help
-         Configure RAM bus to be 32 bits wide.
-
-endchoice
-
 comment "ROM configuration"
 
 config ROM