config I2C_BATTERY_BQ27200
tristate "I2C Battery BQ27200 Support"
- select PUV3_I2C
+ select I2C_PUV3
select POWER_SUPPLY
select BATTERY_BQ27x00
config I2C_EEPROM_AT24
tristate "I2C EEPROMs AT24 support"
- select PUV3_I2C
+ select I2C_PUV3
select MISC_DEVICES
select EEPROM_AT24
Say Y here if you want the debug print routines to direct their
output to the UniCore On-Chip-Debugger channel using CP #1.
-config DEBUG_OCD_BREAKPOINT
- bool "Breakpoint support via On-Chip-Debugger"
- depends on DEBUG_OCD
-
-config DEBUG_UART
- int "Kernel low-level debugging messages via serial port"
- depends on DEBUG_LL
- range 0 1
- default "0"
- help
- Choice for UART for kernel low-level using PKUnity UARTS,
- should be between zero and one. The port must have been
- initialised by the boot-loader before use.
-
endmenu
# Copyright (C) 2001~2010 GUAN Xue-tao
#
-EXTRA_CFLAGS := -fpic -fno-builtin
-EXTRA_AFLAGS := -Wa,-march=all
+ccflags-y := -fpic -fno-builtin
+asflags-y := -Wa,-march=all
OBJS := misc.o
#ifndef __UNICORE_BITOPS_H__
#define __UNICORE_BITOPS_H__
-#define find_next_bit __uc32_find_next_bit
-#define find_next_zero_bit __uc32_find_next_zero_bit
-
-#define find_first_bit __uc32_find_first_bit
-#define find_first_zero_bit __uc32_find_first_zero_bit
-
#define _ASM_GENERIC_BITOPS_FLS_H_
#define _ASM_GENERIC_BITOPS___FLS_H_
#define _ASM_GENERIC_BITOPS_FFS_H_
#include <asm-generic/bitops.h>
+/* following definitions: to avoid using codes in lib/find_*.c */
+#define find_next_bit find_next_bit
+#define find_next_zero_bit find_next_zero_bit
+#define find_first_bit find_first_bit
+#define find_first_zero_bit find_first_zero_bit
+
#endif /* __UNICORE_BITOPS_H__ */
#define start_thread(regs, pc, sp) \
({ \
unsigned long *stack = (unsigned long *)sp; \
- set_fs(USER_DS); \
memset(regs->uregs, 0, sizeof(regs->uregs)); \
regs->UCreg_asr = USER_MODE; \
regs->UCreg_pc = pc & ~1; /* pc */ \
#include "ksyms.h"
-EXPORT_SYMBOL(__uc32_find_next_zero_bit);
-EXPORT_SYMBOL(__uc32_find_next_bit);
+EXPORT_SYMBOL(find_next_zero_bit);
+EXPORT_SYMBOL(find_next_bit);
EXPORT_SYMBOL(__backtrace);
* Purpose : Find a 'zero' bit
* Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
*/
-__uc32_find_first_zero_bit:
+ENTRY(find_first_zero_bit)
cxor.a r1, #0
beq 3f
mov r2, #0
bub 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(find_first_zero_bit)
/*
* Purpose : Find next 'zero' bit
* Prototype: int find_next_zero_bit
* (void *addr, unsigned int maxbit, int offset)
*/
-ENTRY(__uc32_find_next_zero_bit)
+ENTRY(find_next_zero_bit)
cxor.a r1, #0
beq 3b
and.a ip, r2, #7
or r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
-ENDPROC(__uc32_find_next_zero_bit)
+ENDPROC(find_next_zero_bit)
/*
* Purpose : Find a 'one' bit
* Prototype: int find_first_bit
* (const unsigned long *addr, unsigned int maxbit);
*/
-__uc32_find_first_bit:
+ENTRY(find_first_bit)
cxor.a r1, #0
beq 3f
mov r2, #0
bub 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(find_first_bit)
/*
* Purpose : Find next 'one' bit
* Prototype: int find_next_zero_bit
* (void *addr, unsigned int maxbit, int offset)
*/
-ENTRY(__uc32_find_next_bit)
+ENTRY(find_next_bit)
cxor.a r1, #0
beq 3b
and.a ip, r2, #7
or r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
-ENDPROC(__uc32_find_next_bit)
+ENDPROC(find_next_bit)
/*
* One or more bits in the LSB of r3 are assumed to be set.
}
}
-static int puv3_rtc_remove(struct platform_device *dev)
+static int __devexit puv3_rtc_remove(struct platform_device *dev)
{
struct rtc_device *rtc = platform_get_drvdata(dev);
return 0;
}
-static int puv3_rtc_probe(struct platform_device *pdev)
+static int __devinit puv3_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct resource *res;