};
static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
-{
- .dev = &colliescoop_device.dev,
- .irq = COLLIE_IRQ_GPIO_CF_IRQ,
- .cd_irq = COLLIE_IRQ_GPIO_CF_CD,
- .cd_irq_str = "PCMCIA0 CD",
-},
+ {
+ .dev = &colliescoop_device.dev,
+ .irq = COLLIE_IRQ_GPIO_CF_IRQ,
+ .cd_irq = COLLIE_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+ },
};
static struct scoop_pcmcia_config collie_pcmcia_config = {
- .devs = &collie_pcmcia_scoop[0],
- .num_devs = 1,
+ .devs = &collie_pcmcia_scoop[0],
+ .num_devs = 1,
};
-
static struct mcp_plat_data collie_mcp_data = {
- .mccr0 = MCCR0_ADM | MCCR0_ExtClk,
- .sclk_rate = 9216000,
+ .mccr0 = MCCR0_ADM | MCCR0_ExtClk,
+ .sclk_rate = 9216000,
};
#ifdef CONFIG_SHARP_LOCOMO
static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
{
- if (mctrl & TIOCM_RTS)
+ if (mctrl & TIOCM_RTS)
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
- else
+ else
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
- if (mctrl & TIOCM_DTR)
+ if (mctrl & TIOCM_DTR)
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
- else
+ else
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
}
}
static struct ucb1x00_driver collie_pm_ucb_driver = {
- .add = collie_pm_ucb_add,
+ .add = collie_pm_ucb_add,
};
static struct platform_device *collie_pm_device;
static int __init collie_pm_init(void)
{
- int ret;
+ int ret;
- collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
- if (!collie_pm_device)
- return -ENOMEM;
+ collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
+ if (!collie_pm_device)
+ return -ENOMEM;
- collie_pm_device->dev.platform_data = &collie_pm_machinfo;
- ret = platform_device_add(collie_pm_device);
+ collie_pm_device->dev.platform_data = &collie_pm_machinfo;
+ ret = platform_device_add(collie_pm_device);
- if (ret)
- platform_device_put(collie_pm_device);
+ if (ret)
+ platform_device_put(collie_pm_device);
if (!ret)
ret = ucb1x00_register_driver(&collie_pm_ucb_driver);
static void __exit collie_pm_exit(void)
{
ucb1x00_unregister_driver(&collie_pm_ucb_driver);
- platform_device_unregister(collie_pm_device);
+ platform_device_unregister(collie_pm_device);
}
module_init(collie_pm_init);
*
* Copyright (C) 2000 2001, The Delft University of Technology
*
- * Authors:
+ * Authors:
* - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
* - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
* - major rewrite for linux-2.3.99
- * - rewritten for the more generic power management scheme in
+ * - rewritten for the more generic power management scheme in
* linux-2.4.5-rmk1
*
* This software has been developed while working on the LART
* computing board (http://www.lartmaker.nl/), which is
* sponsored by the Mobile Multi-media Communications
- * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications
+ * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications
* (http://www.ubicom.tudelft.nl/) projects.
*
* The authors can be reached at:
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Theory of operations
* ====================
- *
+ *
* Clock scaling can be used to lower the power consumption of the CPU
* core. This will give you a somewhat longer running time.
*
* MDCNFG 0xA0000000 DRAM config
* MDCAS0 0xA0000004 Access waveform
* MDCAS1 0xA0000008 Access waveform
- * MDCAS2 0xA000000C Access waveform
+ * MDCAS2 0xA000000C Access waveform
*
* Care must be taken to change the DRAM parameters the correct way,
* because otherwise the DRAM becomes unusable and the kernel will
- * crash.
+ * crash.
*
* The simple solution to avoid a kernel crash is to put the actual
* clock change in ROM and jump to that code from the kernel. The main
* as long as all re-configuration steps yield a valid DRAM
* configuration. The advantages are clear: it will run on all SA-1100
* platforms, and the code is very simple.
- *
+ *
* If you really want to understand what is going on in
* sa1100_update_dram_timings(), you'll have to read sections 8.2,
* 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor
typedef struct {
int speed;
u32 mdcnfg;
- u32 mdcas0;
+ u32 mdcas0;
u32 mdcas1;
u32 mdcas2;
} sa1100_dram_regs_t;
/* No risk, no fun: run with interrupts on! */
if (new_speed > current_speed) {
/* We're going FASTER, so first relax the memory
- * timings before changing the core frequency
+ * timings before changing the core frequency
*/
/* Half the memory access clock */
.twr = 9,
.refresh = 64000,
.cas_latency = 3,
- }, { /* Samsung K4S281632B-1H */
- .name = "K4S281632B-1H",
- .rows = 12,
- .tck = 10,
- .trp = 20,
- .twr = 10,
- .refresh = 64000,
- .cas_latency = 3,
+ }, { /* Samsung K4S281632B-1H */
+ .name = "K4S281632B-1H",
+ .rows = 12,
+ .tck = 10,
+ .trp = 20,
+ .twr = 10,
+ .refresh = 64000,
+ .cas_latency = 3,
}, { /* Samsung KM416S4030CT */
.name = "KM416S4030CT",
.rows = 13,
}
/*
- * Ok, set the CPU frequency.
+ * Ok, set the CPU frequency.
*/
static int sa1110_target(struct cpufreq_policy *policy,
unsigned int target_freq,
}
}
if (!err) {
- if (dma)
- dma->device = device;
- else
- err = -ENOSR;
+ if (dma)
+ dma->device = device;
+ else
+ err = -ENOSR;
}
spin_unlock(&dma_list_lock);
if (err)
#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
+#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT 0xf0000000
-#define H3600_BANK_2_VIRT 0xf1000000
-#define H3600_BANK_4_VIRT 0xf3800000
+#define H3600_EGPIO_VIRT 0xf0000000
+#define H3600_BANK_2_VIRT 0xf1000000
+#define H3600_BANK_4_VIRT 0xf3800000
/*
Machine-independent GPIO definitions
sa1100_map_io();
sa1100_register_uart(0, 3);
- sa1100_register_uart(1, 1);
+ sa1100_register_uart(1, 1);
- GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
- GPDR |= GPIO_UART_TXD;
- GPDR &= ~GPIO_UART_RXD;
- PPAR |= PPAR_UPR;
+ GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
+ GPDR |= GPIO_UART_TXD;
+ GPDR &= ~GPIO_UART_RXD;
+ PPAR |= PPAR_UPR;
/*
* Fix expansion memory timing for network card
.offset = MTDPART_OFS_APPEND,
.size = 0xe0000
},
- {
+ {
.name = "initrd",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
ldr r1, =MSC1
ldr r2, =MSC2
- ldr r3, [r0]
- bic r3, r3, #FMsk(MSC_RT)
- bic r3, r3, #FMsk(MSC_RT)<<16
+ ldr r3, [r0]
+ bic r3, r3, #FMsk(MSC_RT)
+ bic r3, r3, #FMsk(MSC_RT)<<16
- ldr r4, [r1]
- bic r4, r4, #FMsk(MSC_RT)
- bic r4, r4, #FMsk(MSC_RT)<<16
+ ldr r4, [r1]
+ bic r4, r4, #FMsk(MSC_RT)
+ bic r4, r4, #FMsk(MSC_RT)<<16
- ldr r5, [r2]
- bic r5, r5, #FMsk(MSC_RT)
- bic r5, r5, #FMsk(MSC_RT)<<16
+ ldr r5, [r2]
+ bic r5, r5, #FMsk(MSC_RT)
+ bic r5, r5, #FMsk(MSC_RT)<<16
- ldr r6, =MDREFR
+ ldr r6, =MDREFR
- ldr r7, [r6]
- bic r7, r7, #0x0000FF00
- bic r7, r7, #0x000000F0
- orr r8, r7, #MDREFR_SLFRSH
+ ldr r7, [r6]
+bic r7, r7, #0x0000FF00
+bic r7, r7, #0x000000F0
+orr r8, r7, #MDREFR_SLFRSH
- ldr r9, =MDCNFG
- ldr r10, [r9]
- bic r10, r10, #(MDCNFG_DE0+MDCNFG_DE1)
- bic r10, r10, #(MDCNFG_DE2+MDCNFG_DE3)
+ ldr r9, =MDCNFG
+ ldr r10, [r9]
+ bic r10, r10, #(MDCNFG_DE0+MDCNFG_DE1)
+ bic r10, r10, #(MDCNFG_DE2+MDCNFG_DE3)
- bic r11, r8, #MDREFR_SLFRSH
- bic r11, r11, #MDREFR_E1PIN
+ bic r11, r8, #MDREFR_SLFRSH
+ bic r11, r11, #MDREFR_E1PIN
- ldr r12, =PMCR
+ ldr r12, =PMCR
- mov r13, #PMCR_SF
+ mov r13, #PMCR_SF
b sa1110_sdram_controller_fix
mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
- mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
+ mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
- mcr p15, 0, r4, c3, c0, 0 @ domain ID
- mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r4, c3, c0, 0 @ domain ID
+ mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
mcr p15, 0, r6, c13, c0, 0 @ PID
b resume_turn_on_mmu @ cache align execution
.text
resume_after_mmu:
- mcr p15, 0, r1, c15, c1, 2 @ enable clock switching
+ mcr p15, 0, r1, c15, c1, 2 @ enable clock switching
ldmfd sp!, {r4 - r12, pc} @ return to caller
* linux/arch/arm/mach-sa1100/time.c
*
* Copyright (C) 1998 Deborah Wallach.
- * Twiddles (C) 1999 Hugo Fiennes <hugo@empeg.com>
- *
+ * Twiddles (C) 1999 Hugo Fiennes <hugo@empeg.com>
+ *
* 2000/03/29 (C) Nicolas Pitre <nico@cam.org>
* Rewritten: big cleanup, much simpler, better HZ accuracy.
*
git.openpandora.org / pandora-kernel.git / commitdiff