Add support for the SMBus alert mechanism to the i2c-parport-light
driver. The ADM1032 evaluation board at least is properly wired for
this.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Trent Piepho <tpiepho@freescale.com>
and the impossibility to daisy-chain other parallel port devices.
Please see i2c-parport for documentation.
and the impossibility to daisy-chain other parallel port devices.
Please see i2c-parport for documentation.
+
+Module parameters:
+
+* type: type of adapter (see i2c-parport or modinfo)
+
+* base: base I/O address
+ Default is 0x378 which is fairly common for parallel ports, at least on PC.
+
+* irq: optional IRQ
+ This must be passed if you want SMBus alert support, assuming your adapter
+ actually supports this.
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
select I2C_ALGOBIT
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
select I2C_ALGOBIT
help
This supports parallel port I2C adapters such as the ones made by
Philips or Velleman, Analog Devices evaluation boards, and more.
help
This supports parallel port I2C adapters such as the ones made by
Philips or Velleman, Analog Devices evaluation boards, and more.
/* ------------------------------------------------------------------------ *
* i2c-parport-light.c I2C bus over parallel port *
* ------------------------------------------------------------------------ *
/* ------------------------------------------------------------------------ *
* i2c-parport-light.c I2C bus over parallel port *
* ------------------------------------------------------------------------ *
- Copyright (C) 2003-2007 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
Based on older i2c-velleman.c driver
Copyright (C) 1995-2000 Simon G. Vogl
Based on older i2c-velleman.c driver
Copyright (C) 1995-2000 Simon G. Vogl
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-smbus.h>
#include <asm/io.h>
#include "i2c-parport.h"
#include <asm/io.h>
#include "i2c-parport.h"
module_param(base, ushort, 0);
MODULE_PARM_DESC(base, "Base I/O address");
module_param(base, ushort, 0);
MODULE_PARM_DESC(base, "Base I/O address");
+static int irq;
+module_param(irq, int, 0);
+MODULE_PARM_DESC(irq, "IRQ (optional)");
+
/* ----- Low-level parallel port access ----------------------------------- */
static inline void port_write(unsigned char p, unsigned char d)
/* ----- Low-level parallel port access ----------------------------------- */
static inline void port_write(unsigned char p, unsigned char d)
.name = "Parallel port adapter (light)",
};
.name = "Parallel port adapter (light)",
};
+/* SMBus alert support */
+static struct i2c_smbus_alert_setup alert_data = {
+ .alert_edge_triggered = 1,
+};
+static struct i2c_client *ara;
+static struct lineop parport_ctrl_irq = {
+ .val = (1 << 4),
+ .port = CTRL,
+};
+
static int __devinit i2c_parport_probe(struct platform_device *pdev)
{
int err;
static int __devinit i2c_parport_probe(struct platform_device *pdev)
{
int err;
parport_adapter.dev.parent = &pdev->dev;
err = i2c_bit_add_bus(&parport_adapter);
parport_adapter.dev.parent = &pdev->dev;
err = i2c_bit_add_bus(&parport_adapter);
dev_err(&pdev->dev, "Unable to register with I2C\n");
dev_err(&pdev->dev, "Unable to register with I2C\n");
+ return err;
+ }
+
+ /* Setup SMBus alert if supported */
+ if (adapter_parm[type].smbus_alert && irq) {
+ alert_data.irq = irq;
+ ara = i2c_setup_smbus_alert(&parport_adapter, &alert_data);
+ if (ara)
+ line_set(1, &parport_ctrl_irq);
+ else
+ dev_warn(&pdev->dev, "Failed to register ARA client\n");
+ }
+
+ return 0;
}
static int __devexit i2c_parport_remove(struct platform_device *pdev)
{
}
static int __devexit i2c_parport_remove(struct platform_device *pdev)
{
+ if (ara) {
+ line_set(0, &parport_ctrl_irq);
+ i2c_unregister_device(ara);
+ ara = NULL;
+ }
i2c_del_adapter(&parport_adapter);
/* Un-init if needed (power off...) */
i2c_del_adapter(&parport_adapter);
/* Un-init if needed (power off...) */
if (!request_region(base, 3, DRVNAME))
return -EBUSY;
if (!request_region(base, 3, DRVNAME))
return -EBUSY;
+ if (irq != 0)
+ pr_info(DRVNAME ": using irq %d\n", irq);
+
if (!adapter_parm[type].getscl.val)
parport_algo_data.getscl = NULL;
if (!adapter_parm[type].getscl.val)
parport_algo_data.getscl = NULL;