V4L/DVB (10718): bt866: convert to v4l2_subdev.
authorHans Verkuil <hverkuil@xs4all.nl>
Thu, 19 Feb 2009 07:49:29 +0000 (04:49 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 30 Mar 2009 15:42:57 +0000 (12:42 -0300)
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/bt866.c
include/media/v4l2-chip-ident.h

index 1df24c8..18d3838 100644 (file)
@@ -34,9 +34,9 @@
 #include <asm/uaccess.h>
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
-#include <linux/videodev.h>
-#include <linux/video_encoder.h>
-#include <media/v4l2-common.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv-legacy.h>
 
 MODULE_DESCRIPTION("Brooktree-866 video encoder driver");
@@ -47,21 +47,25 @@ static int debug;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0-1)");
 
+static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD;
+
 /* ----------------------------------------------------------------------- */
 
 struct bt866 {
+       struct v4l2_subdev sd;
        u8 reg[256];
-
-       v4l2_std_id norm;
-       int bright;
-       int contrast;
-       int hue;
-       int sat;
 };
 
-static int bt866_write(struct i2c_client *client, u8 subaddr, u8 data)
+static inline struct bt866 *to_bt866(struct v4l2_subdev *sd)
 {
-       struct bt866 *encoder = i2c_get_clientdata(client);
+       return container_of(sd, struct bt866, sd);
+}
+
+static int bt866_write(struct bt866 *encoder, u8 subaddr, u8 data)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd);
        u8 buffer[2];
        int err;
 
@@ -88,119 +92,125 @@ static int bt866_write(struct i2c_client *client, u8 subaddr, u8 data)
        return 0;
 }
 
-static int bt866_command(struct i2c_client *client, unsigned cmd, void *arg)
+static int bt866_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
 {
-       struct bt866 *encoder = i2c_get_clientdata(client);
-
-       switch (cmd) {
-       case VIDIOC_INT_S_STD_OUTPUT:
-       {
-               v4l2_std_id *iarg = arg;
-
-               v4l_dbg(1, debug, client, "set norm %llx\n", *iarg);
+       v4l2_dbg(1, debug, sd, "set norm %llx\n", std);
 
-               if (!(*iarg & (V4L2_STD_NTSC | V4L2_STD_PAL)))
-                       return -EINVAL;
-               encoder->norm = *iarg;
-               break;
-       }
+       /* Only PAL supported by this driver at the moment! */
+       if (!(std & V4L2_STD_NTSC))
+               return -EINVAL;
+       return 0;
+}
 
-       case VIDIOC_INT_S_VIDEO_ROUTING:
-       {
-               struct v4l2_routing *route = arg;
-               static const __u8 init[] = {
-                       0xc8, 0xcc, /* CRSCALE */
-                       0xca, 0x91, /* CBSCALE */
-                       0xcc, 0x24, /* YC16 | OSDNUM */
-                       0xda, 0x00, /*  */
-                       0xdc, 0x24, /* SETMODE | PAL */
-                       0xde, 0x02, /* EACTIVE */
-
-                       /* overlay colors */
-                       0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */
-                       0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */
-                       0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */
-                       0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */
-                       0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */
-                       0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */
-                       0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */
-                       0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */
-
-                       0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */
-                       0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */
-                       0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */
-                       0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */
-                       0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */
-                       0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */
-                       0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */
-                       0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */
-               };
-               int i;
-               u8 val;
-
-               for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2)
-                       bt866_write(client, init[i], init[i+1]);
-
-               val = encoder->reg[0xdc];
-
-               if (route->input == 0)
-                       val |= 0x40; /* CBSWAP */
-               else
-                       val &= ~0x40; /* !CBSWAP */
-
-               bt866_write(client, 0xdc, val);
-
-               val = encoder->reg[0xcc];
-               if (route->input == 2)
-                       val |= 0x01; /* OSDBAR */
-               else
-                       val &= ~0x01; /* !OSDBAR */
-               bt866_write(client, 0xcc, val);
-
-               v4l_dbg(1, debug, client, "set input %d\n", route->input);
-
-               switch (route->input) {
-               case 0:
-                       break;
-               case 1:
-                       break;
-               default:
-                       return -EINVAL;
-               }
+static int bt866_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route)
+{
+       static const __u8 init[] = {
+               0xc8, 0xcc, /* CRSCALE */
+               0xca, 0x91, /* CBSCALE */
+               0xcc, 0x24, /* YC16 | OSDNUM */
+               0xda, 0x00, /*  */
+               0xdc, 0x24, /* SETMODE | PAL */
+               0xde, 0x02, /* EACTIVE */
+
+               /* overlay colors */
+               0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */
+               0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */
+               0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */
+               0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */
+               0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */
+               0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */
+               0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */
+               0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */
+
+               0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */
+               0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */
+               0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */
+               0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */
+               0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */
+               0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */
+               0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */
+               0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */
+       };
+       struct bt866 *encoder = to_bt866(sd);
+       u8 val;
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2)
+               bt866_write(encoder, init[i], init[i+1]);
+
+       val = encoder->reg[0xdc];
+
+       if (route->input == 0)
+               val |= 0x40; /* CBSWAP */
+       else
+               val &= ~0x40; /* !CBSWAP */
+
+       bt866_write(encoder, 0xdc, val);
+
+       val = encoder->reg[0xcc];
+       if (route->input == 2)
+               val |= 0x01; /* OSDBAR */
+       else
+               val &= ~0x01; /* !OSDBAR */
+       bt866_write(encoder, 0xcc, val);
+
+       v4l2_dbg(1, debug, sd, "set input %d\n", route->input);
+
+       switch (route->input) {
+       case 0:
+       case 1:
+       case 2:
                break;
+       default:
+               return -EINVAL;
        }
+       return 0;
+}
 
-       case 4711:
-       {
-               int *iarg = arg;
-               __u8 val;
+#if 0
+/* Code to setup square pixels, might be of some use in the future,
+   but is currently unused. */
+       val = encoder->reg[0xdc];
+       if (*iarg)
+               val |= 1; /* SQUARE */
+       else
+               val &= ~1; /* !SQUARE */
+       bt866_write(client, 0xdc, val);
+#endif
+
+static int bt866_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-               v4l_dbg(1, debug, client, "square %d\n", *iarg);
+       return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_BT866, 0);
+}
 
-               val = encoder->reg[0xdc];
-               if (*iarg)
-                       val |= 1; /* SQUARE */
-               else
-                       val &= ~1; /* !SQUARE */
-               bt866_write(client, 0xdc, val);
-               break;
-       }
+static int bt866_command(struct i2c_client *client, unsigned cmd, void *arg)
+{
+       return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
+}
 
-       default:
-               return -EINVAL;
-       }
+/* ----------------------------------------------------------------------- */
 
-       return 0;
-}
+static const struct v4l2_subdev_core_ops bt866_core_ops = {
+       .g_chip_ident = bt866_g_chip_ident,
+};
 
-static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
+static const struct v4l2_subdev_video_ops bt866_video_ops = {
+       .s_std_output = bt866_s_std_output,
+       .s_routing = bt866_s_routing,
+};
 
-I2C_CLIENT_INSMOD;
+static const struct v4l2_subdev_ops bt866_ops = {
+       .core = &bt866_core_ops,
+       .video = &bt866_video_ops,
+};
 
 static int bt866_probe(struct i2c_client *client,
                        const struct i2c_device_id *id)
 {
        struct bt866 *encoder;
+       struct v4l2_subdev *sd;
 
        v4l_info(client, "chip found @ 0x%x (%s)\n",
                        client->addr << 1, client->adapter->name);
@@ -208,14 +218,17 @@ static int bt866_probe(struct i2c_client *client,
        encoder = kzalloc(sizeof(*encoder), GFP_KERNEL);
        if (encoder == NULL)
                return -ENOMEM;
-
-       i2c_set_clientdata(client, encoder);
+       sd = &encoder->sd;
+       v4l2_i2c_subdev_init(sd, client, &bt866_ops);
        return 0;
 }
 
 static int bt866_remove(struct i2c_client *client)
 {
-       kfree(i2c_get_clientdata(client));
+       struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+       v4l2_device_unregister_subdev(sd);
+       kfree(to_bt866(sd));
        return 0;
 }
 
index bbe2bb6..cfb236e 100644 (file)
@@ -71,6 +71,9 @@ enum {
        V4L2_IDENT_CX23416 = 416,
        V4L2_IDENT_CX23418 = 418,
 
+       /* module bt866: just ident 866 */
+       V4L2_IDENT_BT866 = 866,
+
        /* module vp27smpx: just ident 2700 */
        V4L2_IDENT_VP27SMPX = 2700,