IIO: ADC: New driver for AD7792/AD7793 3 Channel SPI ADC
authorMichael Hennerich <michael.hennerich@analog.com>
Wed, 8 Jun 2011 14:12:44 +0000 (16:12 +0200)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 28 Jun 2011 21:47:25 +0000 (14:47 -0700)
New driver for AD7792/AD7793 3-Channel, Low Noise,
Low Power, 16-/24-Bit Sigma-Delta ADC with On-Chip In-Amp
and Reference.

The AD7792/AD7793 features a dual use data out ready DOUT/RDY output.
In order to avoid contentions on the SPI bus, it's necessary to use
spi bus locking. The DOUT/RDY output must also be wired to an
interrupt capable GPIO.

In INDIO_RING_TRIGGERED mode, this driver may block its SPI bus segment
for an extended period of time.

Changes since V1:

Use bool where applicable.
Use data buffer that lives in their own cache line.
Restructure ad7793_calibrate_all to use an array.
Use msleep.
Query REG_ID instead of doing a write/read This is a test.
Add support for unipolar mode.
Drop range attribute in favor of write scale.
Add proper locking.
Use new validate_trigger callbacks.
Use IIO_IN_DIFF for differential channels.
Change attribute naming.
Use available_scan_masks.
Some other miscellaneous cleanup (none functional changes).

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/iio/adc/Kconfig
drivers/staging/iio/adc/Makefile
drivers/staging/iio/adc/ad7793.c [new file with mode: 0644]
drivers/staging/iio/adc/ad7793.h [new file with mode: 0644]

index 8c751c4..b39f2e1 100644 (file)
@@ -130,6 +130,20 @@ config AD7780
          To compile this driver as a module, choose M here: the
          module will be called ad7780.
 
+config AD7793
+       tristate "Analog Devices AD7792 AD7793 ADC driver"
+       depends on SPI
+       select IIO_RING_BUFFER
+       select IIO_SW_RING
+       select IIO_TRIGGER
+       help
+         Say yes here to build support for Analog Devices
+         AD7792 and AD7793 SPI analog to digital convertors (ADC).
+         If unsure, say N (but it's safe to say "Y").
+
+         To compile this driver as a module, choose M here: the
+         module will be called AD7793.
+
 config AD7745
        tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver"
        depends on I2C
index 1d9b3f5..f020351 100644 (file)
@@ -35,6 +35,7 @@ obj-$(CONFIG_AD7291) += ad7291.o
 obj-$(CONFIG_AD7314) += ad7314.o
 obj-$(CONFIG_AD7745) += ad7745.o
 obj-$(CONFIG_AD7780) += ad7780.o
+obj-$(CONFIG_AD7793) += ad7793.o
 obj-$(CONFIG_AD7816) += ad7816.o
 obj-$(CONFIG_ADT75) += adt75.o
 obj-$(CONFIG_ADT7310) += adt7310.o
diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c
new file mode 100644 (file)
index 0000000..90f6c03
--- /dev/null
@@ -0,0 +1,987 @@
+/*
+ * AD7792/AD7793 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+#include "../ring_generic.h"
+#include "../ring_sw.h"
+#include "../trigger.h"
+#include "adc.h"
+
+#include "ad7793.h"
+
+/* NOTE:
+ * The AD7792/AD7793 features a dual use data out ready DOUT/RDY output.
+ * In order to avoid contentions on the SPI bus, it's therefore necessary
+ * to use spi bus locking.
+ *
+ * The DOUT/RDY output must also be wired to an interrupt capable GPIO.
+ */
+
+struct ad7793_chip_info {
+       struct iio_chan_spec            channel[7];
+};
+
+struct ad7793_state {
+       struct spi_device               *spi;
+       struct iio_trigger              *trig;
+       const struct ad7793_chip_info   *chip_info;
+       struct regulator                *reg;
+       struct ad7793_platform_data     *pdata;
+       wait_queue_head_t               wq_data_avail;
+       bool                            done;
+       bool                            irq_dis;
+       u16                             int_vref_mv;
+       u16                             mode;
+       u16                             conf;
+       u32                             scale_avail[8][2];
+       u32                             available_scan_masks[7];
+       /*
+        * DMA (thus cache coherency maintenance) requires the
+        * transfer buffers to live in their own cache lines.
+        */
+       u8                              data[4] ____cacheline_aligned;
+};
+
+enum ad7793_supported_device_ids {
+       ID_AD7792,
+       ID_AD7793,
+};
+
+static int __ad7793_write_reg(struct ad7793_state *st, bool locked,
+                             bool cs_change, unsigned char reg,
+                             unsigned size, unsigned val)
+{
+       u8 *data = st->data;
+       struct spi_transfer t = {
+               .tx_buf         = data,
+               .len            = size + 1,
+               .cs_change      = cs_change,
+       };
+       struct spi_message m;
+
+       data[0] = AD7793_COMM_WRITE | AD7793_COMM_ADDR(reg);
+
+       switch (size) {
+       case 3:
+               data[1] = val >> 16;
+               data[2] = val >> 8;
+               data[3] = val;
+               break;
+       case 2:
+               data[1] = val >> 8;
+               data[2] = val;
+               break;
+       case 1:
+               data[1] = val;
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       spi_message_init(&m);
+       spi_message_add_tail(&t, &m);
+
+       if (locked)
+               return spi_sync_locked(st->spi, &m);
+       else
+               return spi_sync(st->spi, &m);
+}
+
+static int ad7793_write_reg(struct ad7793_state *st,
+                           unsigned reg, unsigned size, unsigned val)
+{
+       return __ad7793_write_reg(st, false, false, reg, size, val);
+}
+
+static int __ad7793_read_reg(struct ad7793_state *st, bool locked,
+                            bool cs_change, unsigned char reg,
+                            int *val, unsigned size)
+{
+       u8 *data = st->data;
+       int ret;
+       struct spi_transfer t[] = {
+               {
+                       .tx_buf = data,
+                       .len = 1,
+               }, {
+                       .rx_buf = data,
+                       .len = size,
+                       .cs_change = cs_change,
+               },
+       };
+       struct spi_message m;
+
+       data[0] = AD7793_COMM_READ | AD7793_COMM_ADDR(reg);
+
+       spi_message_init(&m);
+       spi_message_add_tail(&t[0], &m);
+       spi_message_add_tail(&t[1], &m);
+
+       if (locked)
+               ret = spi_sync_locked(st->spi, &m);
+       else
+               ret = spi_sync(st->spi, &m);
+
+       if (ret < 0)
+               return ret;
+
+       switch (size) {
+       case 3:
+               *val = data[0] << 16 | data[1] << 8 | data[2];
+               break;
+       case 2:
+               *val = data[0] << 8 | data[1];
+               break;
+       case 1:
+               *val = data[0];
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int ad7793_read_reg(struct ad7793_state *st,
+                          unsigned reg, int *val, unsigned size)
+{
+       return __ad7793_read_reg(st, 0, 0, reg, val, size);
+}
+
+static int ad7793_read(struct ad7793_state *st, unsigned ch,
+                      unsigned len, int *val)
+{
+       int ret;
+       st->conf = (st->conf & ~AD7793_CONF_CHAN(-1)) | AD7793_CONF_CHAN(ch);
+       st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) |
+               AD7793_MODE_SEL(AD7793_MODE_SINGLE);
+
+       ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf);
+
+       spi_bus_lock(st->spi->master);
+       st->done = false;
+
+       ret = __ad7793_write_reg(st, 1, 1, AD7793_REG_MODE,
+                                sizeof(st->mode), st->mode);
+       if (ret < 0)
+               goto out;
+
+       st->irq_dis = false;
+       enable_irq(st->spi->irq);
+       wait_event_interruptible(st->wq_data_avail, st->done);
+
+       ret = __ad7793_read_reg(st, 1, 0, AD7793_REG_DATA, val, len);
+out:
+       spi_bus_unlock(st->spi->master);
+
+       return ret;
+}
+
+static int ad7793_calibrate(struct ad7793_state *st, unsigned mode, unsigned ch)
+{
+       int ret;
+
+       st->conf = (st->conf & ~AD7793_CONF_CHAN(-1)) | AD7793_CONF_CHAN(ch);
+       st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) | AD7793_MODE_SEL(mode);
+
+       ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf);
+
+       spi_bus_lock(st->spi->master);
+       st->done = false;
+
+       ret = __ad7793_write_reg(st, 1, 1, AD7793_REG_MODE,
+                                sizeof(st->mode), st->mode);
+       if (ret < 0)
+               goto out;
+
+       st->irq_dis = false;
+       enable_irq(st->spi->irq);
+       wait_event_interruptible(st->wq_data_avail, st->done);
+
+       st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) |
+               AD7793_MODE_SEL(AD7793_MODE_IDLE);
+
+       ret = __ad7793_write_reg(st, 1, 0, AD7793_REG_MODE,
+                                sizeof(st->mode), st->mode);
+out:
+       spi_bus_unlock(st->spi->master);
+
+       return ret;
+}
+
+static const u8 ad7793_calib_arr[6][2] = {
+       {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN1P_AIN1M},
+       {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN1P_AIN1M},
+       {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN2P_AIN2M},
+       {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN2P_AIN2M},
+       {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN3P_AIN3M},
+       {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN3P_AIN3M}
+};
+
+static int ad7793_calibrate_all(struct ad7793_state *st)
+{
+       int i, ret;
+
+       for (i = 0; i < ARRAY_SIZE(ad7793_calib_arr); i++) {
+               ret = ad7793_calibrate(st, ad7793_calib_arr[i][0],
+                                      ad7793_calib_arr[i][1]);
+               if (ret)
+                       goto out;
+       }
+
+       return 0;
+out:
+       dev_err(&st->spi->dev, "Calibration failed\n");
+       return ret;
+}
+
+static int ad7793_setup(struct ad7793_state *st)
+{
+       int i, ret = -1;
+       unsigned long long scale_uv;
+       u32 id;
+
+       /* reset the serial interface */
+       ret = spi_write(st->spi, (u8 *)&ret, sizeof(ret));
+       if (ret < 0)
+               goto out;
+       msleep(1); /* Wait for at least 500us */
+
+       /* write/read test for device presence */
+       ret = ad7793_read_reg(st, AD7793_REG_ID, &id, 1);
+       if (ret)
+               goto out;
+
+       id &= AD7793_ID_MASK;
+
+       if (!((id == AD7792_ID) || (id == AD7793_ID))) {
+               dev_err(&st->spi->dev, "device ID query failed\n");
+               goto out;
+       }
+
+       st->mode  = (st->pdata->mode & ~AD7793_MODE_SEL(-1)) |
+                       AD7793_MODE_SEL(AD7793_MODE_IDLE);
+       st->conf  = st->pdata->conf & ~AD7793_CONF_CHAN(-1);
+
+       ret = ad7793_write_reg(st, AD7793_REG_MODE, sizeof(st->mode), st->mode);
+       if (ret)
+               goto out;
+
+       ret = ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf);
+       if (ret)
+               goto out;
+
+       ret = ad7793_write_reg(st, AD7793_REG_IO,
+                              sizeof(st->pdata->io), st->pdata->io);
+       if (ret)
+               goto out;
+
+       ret = ad7793_calibrate_all(st);
+       if (ret)
+               goto out;
+
+       /* Populate available ADC input ranges */
+       for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
+               scale_uv = ((u64)st->int_vref_mv * 100000000)
+                       >> (st->chip_info->channel[0].scan_type.realbits -
+                       (!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1));
+               scale_uv >>= i;
+
+               st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
+               st->scale_avail[i][0] = scale_uv;
+       }
+
+       return 0;
+out:
+       dev_err(&st->spi->dev, "setup failed\n");
+       return ret;
+}
+
+static int ad7793_scan_from_ring(struct ad7793_state *st, unsigned ch, int *val)
+{
+       struct iio_ring_buffer *ring = iio_priv_to_dev(st)->ring;
+       int ret;
+       s64 dat64[2];
+       u32 *dat32 = (u32 *)dat64;
+
+       if (!(ring->scan_mask & (1 << ch)))
+               return  -EBUSY;
+
+       ret = ring->access->read_last(ring, (u8 *) &dat64);
+       if (ret)
+               return ret;
+
+       *val = *dat32;
+
+       return 0;
+}
+
+static int ad7793_ring_preenable(struct iio_dev *indio_dev)
+{
+       struct ad7793_state *st = iio_priv(indio_dev);
+       struct iio_ring_buffer *ring = indio_dev->ring;
+       size_t d_size;
+       unsigned channel;
+
+       if (!ring->scan_count)
+               return -EINVAL;
+
+       channel = __ffs(ring->scan_mask);
+
+       d_size = ring->scan_count *
+                indio_dev->channels[0].scan_type.storagebits / 8;
+
+       if (ring->scan_timestamp) {
+               d_size += sizeof(s64);
+
+               if (d_size % sizeof(s64))
+                       d_size += sizeof(s64) - (d_size % sizeof(s64));
+       }
+
+       if (indio_dev->ring->access->set_bytes_per_datum)
+               indio_dev->ring->access->set_bytes_per_datum(indio_dev->ring,
+                                                            d_size);
+
+       st->mode  = (st->mode & ~AD7793_MODE_SEL(-1)) |
+                   AD7793_MODE_SEL(AD7793_MODE_CONT);
+       st->conf  = (st->conf & ~AD7793_CONF_CHAN(-1)) |
+                   AD7793_CONF_CHAN(indio_dev->channels[channel].address);
+
+       ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf);
+
+       spi_bus_lock(st->spi->master);
+       __ad7793_write_reg(st, 1, 1, AD7793_REG_MODE,
+                          sizeof(st->mode), st->mode);
+
+       st->irq_dis = false;
+       enable_irq(st->spi->irq);
+
+       return 0;
+}
+
+static int ad7793_ring_postdisable(struct iio_dev *indio_dev)
+{
+       struct ad7793_state *st = iio_priv(indio_dev);
+
+       st->mode  = (st->mode & ~AD7793_MODE_SEL(-1)) |
+                   AD7793_MODE_SEL(AD7793_MODE_IDLE);
+
+       st->done = false;
+       wait_event_interruptible(st->wq_data_avail, st->done);
+
+       if (!st->irq_dis)
+               disable_irq_nosync(st->spi->irq);
+
+       __ad7793_write_reg(st, 1, 0, AD7793_REG_MODE,
+                          sizeof(st->mode), st->mode);
+
+       return spi_bus_unlock(st->spi->master);
+}
+
+/**
+ * ad7793_trigger_handler() bh of trigger launched polling to ring buffer
+ **/
+
+static irqreturn_t ad7793_trigger_handler(int irq, void *p)
+{
+       struct iio_poll_func *pf = p;
+       struct iio_dev *indio_dev = pf->private_data;
+       struct iio_ring_buffer *ring = indio_dev->ring;
+       struct ad7793_state *st = iio_priv(indio_dev);
+       s64 dat64[2];
+       s32 *dat32 = (s32 *)dat64;
+
+       if (ring->scan_count)
+               __ad7793_read_reg(st, 1, 1, AD7793_REG_DATA,
+                                 dat32,
+                                 indio_dev->channels[0].scan_type.realbits/8);
+
+       /* Guaranteed to be aligned with 8 byte boundary */
+       if (ring->scan_timestamp)
+               dat64[1] = pf->timestamp;
+
+       ring->access->store_to(ring, (u8 *)dat64, pf->timestamp);
+
+       iio_trigger_notify_done(indio_dev->trig);
+       st->irq_dis = false;
+       enable_irq(st->spi->irq);
+
+       return IRQ_HANDLED;
+}
+
+static const struct iio_ring_setup_ops ad7793_ring_setup_ops = {
+       .preenable = &ad7793_ring_preenable,
+       .postenable = &iio_triggered_ring_postenable,
+       .predisable = &iio_triggered_ring_predisable,
+       .postdisable = &ad7793_ring_postdisable,
+};
+
+static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev)
+{
+       int ret;
+
+       indio_dev->ring = iio_sw_rb_allocate(indio_dev);
+       if (!indio_dev->ring) {
+               ret = -ENOMEM;
+               goto error_ret;
+       }
+       /* Effectively select the ring buffer implementation */
+       indio_dev->ring->access = &ring_sw_access_funcs;
+       indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
+                                                &ad7793_trigger_handler,
+                                                IRQF_ONESHOT,
+                                                indio_dev,
+                                                "ad7793_consumer%d",
+                                                indio_dev->id);
+       if (indio_dev->pollfunc == NULL) {
+               ret = -ENOMEM;
+               goto error_deallocate_sw_rb;
+       }
+
+       /* Ring buffer functions - here trigger setup related */
+       indio_dev->ring->setup_ops = &ad7793_ring_setup_ops;
+
+       /* Flag that polled ring buffering is possible */
+       indio_dev->modes |= INDIO_RING_TRIGGERED;
+       return 0;
+
+error_deallocate_sw_rb:
+       iio_sw_rb_free(indio_dev->ring);
+error_ret:
+       return ret;
+}
+
+static void ad7793_ring_cleanup(struct iio_dev *indio_dev)
+{
+       /* ensure that the trigger has been detached */
+       if (indio_dev->trig) {
+               iio_put_trigger(indio_dev->trig);
+               iio_trigger_dettach_poll_func(indio_dev->trig,
+                                             indio_dev->pollfunc);
+       }
+       iio_dealloc_pollfunc(indio_dev->pollfunc);
+       iio_sw_rb_free(indio_dev->ring);
+}
+
+/**
+ * ad7793_data_rdy_trig_poll() the event handler for the data rdy trig
+ **/
+static irqreturn_t ad7793_data_rdy_trig_poll(int irq, void *private)
+{
+       struct ad7793_state *st = iio_priv(private);
+
+       st->done = true;
+       wake_up_interruptible(&st->wq_data_avail);
+       disable_irq_nosync(irq);
+       st->irq_dis = true;
+       iio_trigger_poll(st->trig, iio_get_time_ns());
+
+       return IRQ_HANDLED;
+}
+
+static int ad7793_probe_trigger(struct iio_dev *indio_dev)
+{
+       struct ad7793_state *st = iio_priv(indio_dev);
+       int ret;
+
+       st->trig = iio_allocate_trigger("%s-dev%d",
+                                       spi_get_device_id(st->spi)->name,
+                                       indio_dev->id);
+       if (st->trig == NULL) {
+               ret = -ENOMEM;
+               goto error_ret;
+       }
+
+       ret = request_irq(st->spi->irq,
+                         ad7793_data_rdy_trig_poll,
+                         IRQF_TRIGGER_LOW,
+                         spi_get_device_id(st->spi)->name,
+                         indio_dev);
+       if (ret)
+               goto error_free_trig;
+
+       disable_irq_nosync(st->spi->irq);
+       st->irq_dis = true;
+       st->trig->dev.parent = &st->spi->dev;
+       st->trig->owner = THIS_MODULE;
+       st->trig->private_data = indio_dev;
+
+       ret = iio_trigger_register(st->trig);
+
+       /* select default trigger */
+       indio_dev->trig = st->trig;
+       if (ret)
+               goto error_free_irq;
+
+       return 0;
+
+error_free_irq:
+       free_irq(st->spi->irq, indio_dev);
+error_free_trig:
+       iio_free_trigger(st->trig);
+error_ret:
+       return ret;
+}
+
+static void ad7793_remove_trigger(struct iio_dev *indio_dev)
+{
+       struct ad7793_state *st = iio_priv(indio_dev);
+
+       iio_trigger_unregister(st->trig);
+       free_irq(st->spi->irq, indio_dev);
+       iio_free_trigger(st->trig);
+}
+
+static const u16 sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, 33, 19,
+                                         17, 16, 12, 10, 8, 6, 4};
+
+static ssize_t ad7793_read_frequency(struct device *dev,
+               struct device_attribute *attr,
+               char *buf)
+{
+       struct iio_dev *indio_dev = dev_get_drvdata(dev);
+       struct ad7793_state *st = iio_priv(indio_dev);
+
+       return sprintf(buf, "%d\n",
+                      sample_freq_avail[AD7793_MODE_RATE(st->mode)]);
+}
+
+static ssize_t ad7793_write_frequency(struct device *dev,
+               struct device_attribute *attr,
+               const char *buf,
+               size_t len)
+{
+       struct iio_dev *indio_dev = dev_get_drvdata(dev);
+       struct ad7793_state *st = iio_priv(indio_dev);
+       long lval;
+       int i, ret;
+
+       mutex_lock(&indio_dev->mlock);
+       if (iio_ring_enabled(indio_dev)) {
+               mutex_unlock(&indio_dev->mlock);
+               return -EBUSY;
+       }
+       mutex_unlock(&indio_dev->mlock);
+
+       ret = strict_strtol(buf, 10, &lval);
+       if (ret)
+               return ret;
+
+       ret = -EINVAL;
+
+       for (i = 0; i < ARRAY_SIZE(sample_freq_avail); i++)
+               if (lval == sample_freq_avail[i]) {
+                       mutex_lock(&indio_dev->mlock);
+                       st->mode &= ~AD7793_MODE_RATE(-1);
+                       st->mode |= AD7793_MODE_RATE(i);
+                       ad7793_write_reg(st, AD7793_REG_MODE,
+                                        sizeof(st->mode), st->mode);
+                       mutex_unlock(&indio_dev->mlock);
+                       ret = 0;
+               }
+
+       return ret ? ret : len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+               ad7793_read_frequency,
+               ad7793_write_frequency);
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+       "470 242 123 62 50 39 33 19 17 16 12 10 8 6 4");
+
+static ssize_t ad7793_show_scale_available(struct device *dev,
+                       struct device_attribute *attr, char *buf)
+{
+       struct iio_dev *indio_dev = dev_get_drvdata(dev);
+       struct ad7793_state *st = iio_priv(indio_dev);
+       int i, len = 0;
+
+       for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
+               len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0],
+                              st->scale_avail[i][1]);
+
+       len += sprintf(buf + len, "\n");
+
+       return len;
+}
+
+static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, in-in_scale_available,
+                            S_IRUGO, ad7793_show_scale_available, NULL, 0);
+
+static struct attribute *ad7793_attributes[] = {
+       &iio_dev_attr_sampling_frequency.dev_attr.attr,
+       &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+       &iio_dev_attr_in_m_in_scale_available.dev_attr.attr,
+       NULL
+};
+
+static const struct attribute_group ad7793_attribute_group = {
+       .attrs = ad7793_attributes,
+};
+
+static int ad7793_read_raw(struct iio_dev *indio_dev,
+                          struct iio_chan_spec const *chan,
+                          int *val,
+                          int *val2,
+                          long m)
+{
+       struct ad7793_state *st = iio_priv(indio_dev);
+       int ret, smpl = 0;
+       unsigned long long scale_uv;
+       bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR);
+
+       switch (m) {
+       case 0:
+               mutex_lock(&indio_dev->mlock);
+               if (iio_ring_enabled(indio_dev))
+                       ret = ad7793_scan_from_ring(st,
+                                       chan->scan_index, &smpl);
+               else
+                       ret = ad7793_read(st, chan->address,
+                                       chan->scan_type.realbits / 8, &smpl);
+               mutex_unlock(&indio_dev->mlock);
+
+               if (ret < 0)
+                       return ret;
+
+               *val = (smpl >> chan->scan_type.shift) &
+                       ((1 << (chan->scan_type.realbits)) - 1);
+
+               if (!unipolar)
+                       *val -= (1 << (chan->scan_type.realbits - 1));
+
+               return IIO_VAL_INT;
+
+       case (1 << IIO_CHAN_INFO_SCALE_SHARED):
+               *val = st->scale_avail[(st->conf >> 8) & 0x7][0];
+               *val2 = st->scale_avail[(st->conf >> 8) & 0x7][1];
+
+               return IIO_VAL_INT_PLUS_NANO;
+
+       case (1 << IIO_CHAN_INFO_SCALE_SEPARATE):
+               switch (chan->type) {
+               case IIO_IN:
+                       /* 1170mV / 2^23 * 6 */
+                       scale_uv = (1170ULL * 100000000ULL * 6ULL)
+                               >> (chan->scan_type.realbits -
+                               (unipolar ? 0 : 1));
+                       break;
+               case IIO_TEMP:
+                       /* Always uses unity gain and internal ref */
+                       scale_uv = (2500ULL * 100000000ULL)
+                               >> (chan->scan_type.realbits -
+                               (unipolar ? 0 : 1));
+                       break;
+               default:
+                       return -EINVAL;
+               }
+
+               *val2 = do_div(scale_uv, 100000000) * 10;
+               *val =  scale_uv;
+
+               return IIO_VAL_INT_PLUS_NANO;
+       }
+       return -EINVAL;
+}
+
+static int ad7793_write_raw(struct iio_dev *indio_dev,
+                              struct iio_chan_spec const *chan,
+                              int val,
+                              int val2,
+                              long mask)
+{
+       struct ad7793_state *st = iio_priv(indio_dev);
+       int ret, i;
+       unsigned int tmp;
+
+       mutex_lock(&indio_dev->mlock);
+       if (iio_ring_enabled(indio_dev)) {
+               mutex_unlock(&indio_dev->mlock);
+               return -EBUSY;
+       }
+
+       switch (mask) {
+       case (1 << IIO_CHAN_INFO_SCALE_SHARED):
+               ret = -EINVAL;
+               for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
+                       if (val2 == st->scale_avail[i][1]) {
+                               tmp = st->conf;
+                               st->conf &= ~AD7793_CONF_GAIN(-1);
+                               st->conf |= AD7793_CONF_GAIN(i);
+
+                               if (tmp != st->conf) {
+                                       ad7793_write_reg(st, AD7793_REG_CONF,
+                                                        sizeof(st->conf),
+                                                        st->conf);
+                                       ad7793_calibrate_all(st);
+                               }
+                               ret = 0;
+                       }
+
+       default:
+               ret = -EINVAL;
+       }
+
+       mutex_unlock(&indio_dev->mlock);
+       return ret;
+}
+
+static int ad7793_validate_trigger(struct iio_dev *indio_dev,
+                                  struct iio_trigger *trig)
+{
+       if (indio_dev->trig != trig)
+               return -EINVAL;
+
+       return 0;
+}
+
+static int ad7793_write_raw_get_fmt(struct iio_dev *indio_dev,
+                              struct iio_chan_spec const *chan,
+                              long mask)
+{
+       return IIO_VAL_INT_PLUS_NANO;
+}
+
+static const struct iio_info ad7793_info = {
+       .read_raw = &ad7793_read_raw,
+       .write_raw = &ad7793_write_raw,
+       .write_raw_get_fmt = &ad7793_write_raw_get_fmt,
+       .attrs = &ad7793_attribute_group,
+       .validate_trigger = ad7793_validate_trigger,
+       .driver_module = THIS_MODULE,
+};
+
+static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
+       [ID_AD7793] = {
+               .channel[0] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 0, 0,
+                                   (1 << IIO_CHAN_INFO_SCALE_SHARED),
+                                   AD7793_CH_AIN1P_AIN1M,
+                                   0, IIO_ST('s', 24, 32, 0), 0),
+               .channel[1] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 1, 1,
+                                   (1 << IIO_CHAN_INFO_SCALE_SHARED),
+                                   AD7793_CH_AIN2P_AIN2M,
+                                   1, IIO_ST('s', 24, 32, 0), 0),
+               .channel[2] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 2, 2,
+                                   (1 << IIO_CHAN_INFO_SCALE_SHARED),
+                                   AD7793_CH_AIN3P_AIN3M,
+                                   2, IIO_ST('s', 24, 32, 0), 0),
+               .channel[3] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, "shorted", 0, 0,
+                                   (1 << IIO_CHAN_INFO_SCALE_SHARED),
+                                   AD7793_CH_AIN1M_AIN1M,
+                                   3, IIO_ST('s', 24, 32, 0), 0),
+               .channel[4] = IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
+                                   (1 << IIO_CHAN_INFO_SCALE_SEPARATE),
+                                   AD7793_CH_TEMP,
+                                   4, IIO_ST('s', 24, 32, 0), 0),
+               .channel[5] = IIO_CHAN(IIO_IN, 0, 1, 0, "supply", 4, 0,
+                                   (1 << IIO_CHAN_INFO_SCALE_SEPARATE),
+                                   AD7793_CH_AVDD_MONITOR,
+                                   5, IIO_ST('s', 24, 32, 0), 0),
+               .channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6),
+       },
+       [ID_AD7792] = {
+               .channel[0] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 0, 0,
+                                   (1 << IIO_CHAN_INFO_SCALE_SHARED),
+                                   AD7793_CH_AIN1P_AIN1M,
+                                   0, IIO_ST('s', 16, 32, 0), 0),
+               .channel[1] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 1, 1,
+                                   (1 << IIO_CHAN_INFO_SCALE_SHARED),
+                                   AD7793_CH_AIN2P_AIN2M,
+                                   1, IIO_ST('s', 16, 32, 0), 0),
+               .channel[2] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 2, 2,
+                                   (1 << IIO_CHAN_INFO_SCALE_SHARED),
+                                   AD7793_CH_AIN3P_AIN3M,
+                                   2, IIO_ST('s', 16, 32, 0), 0),
+               .channel[3] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, "shorted", 0, 0,
+                                   (1 << IIO_CHAN_INFO_SCALE_SHARED),
+                                   AD7793_CH_AIN1M_AIN1M,
+                                   3, IIO_ST('s', 16, 32, 0), 0),
+               .channel[4] = IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
+                                   (1 << IIO_CHAN_INFO_SCALE_SEPARATE),
+                                   AD7793_CH_TEMP,
+                                   4, IIO_ST('s', 16, 32, 0), 0),
+               .channel[5] = IIO_CHAN(IIO_IN, 0, 1, 0, "supply", 4, 0,
+                                   (1 << IIO_CHAN_INFO_SCALE_SEPARATE),
+                                   AD7793_CH_AVDD_MONITOR,
+                                   5, IIO_ST('s', 16, 32, 0), 0),
+               .channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6),
+       },
+};
+
+static int __devinit ad7793_probe(struct spi_device *spi)
+{
+       struct ad7793_platform_data *pdata = spi->dev.platform_data;
+       struct ad7793_state *st;
+       struct iio_dev *indio_dev;
+       int ret, i, voltage_uv = 0, regdone = 0;
+
+       if (!pdata) {
+               dev_err(&spi->dev, "no platform data?\n");
+               return -ENODEV;
+       }
+
+       if (!spi->irq) {
+               dev_err(&spi->dev, "no IRQ?\n");
+               return -ENODEV;
+       }
+
+       indio_dev = iio_allocate_device(sizeof(*st));
+       if (indio_dev == NULL)
+               return -ENOMEM;
+
+       st = iio_priv(indio_dev);
+
+       st->reg = regulator_get(&spi->dev, "vcc");
+       if (!IS_ERR(st->reg)) {
+               ret = regulator_enable(st->reg);
+               if (ret)
+                       goto error_put_reg;
+
+               voltage_uv = regulator_get_voltage(st->reg);
+       }
+
+       st->chip_info =
+               &ad7793_chip_info_tbl[spi_get_device_id(spi)->driver_data];
+
+       st->pdata = pdata;
+
+       if (pdata && pdata->vref_mv)
+               st->int_vref_mv = pdata->vref_mv;
+       else if (voltage_uv)
+               st->int_vref_mv = voltage_uv / 1000;
+       else
+               st->int_vref_mv = 2500; /* Build-in ref */
+
+       spi_set_drvdata(spi, indio_dev);
+       st->spi = spi;
+
+       indio_dev->dev.parent = &spi->dev;
+       indio_dev->name = spi_get_device_id(spi)->name;
+       indio_dev->modes = INDIO_DIRECT_MODE;
+       indio_dev->channels = st->chip_info->channel;
+       indio_dev->available_scan_masks = st->available_scan_masks;
+       indio_dev->num_channels = 7;
+       indio_dev->info = &ad7793_info;
+
+       for (i = 0; i < indio_dev->num_channels; i++)
+               st->available_scan_masks[i] = (1 << i) | (1 <<
+                       indio_dev->channels[indio_dev->num_channels - 1].
+                       scan_index);
+
+       init_waitqueue_head(&st->wq_data_avail);
+
+       ret = ad7793_register_ring_funcs_and_init(indio_dev);
+       if (ret)
+               goto error_disable_reg;
+
+       ret = iio_device_register(indio_dev);
+       if (ret)
+               goto error_unreg_ring;
+       regdone = 1;
+
+       ret = ad7793_probe_trigger(indio_dev);
+       if (ret)
+               goto error_unreg_ring;
+
+       ret = iio_ring_buffer_register_ex(indio_dev->ring, 0,
+                                         indio_dev->channels,
+                                         indio_dev->num_channels);
+       if (ret)
+               goto error_remove_trigger;
+
+       ret = ad7793_setup(st);
+       if (ret)
+               goto error_uninitialize_ring;
+
+       return 0;
+
+error_uninitialize_ring:
+       iio_ring_buffer_unregister(indio_dev->ring);
+error_remove_trigger:
+       ad7793_remove_trigger(indio_dev);
+error_unreg_ring:
+       ad7793_ring_cleanup(indio_dev);
+error_disable_reg:
+       if (!IS_ERR(st->reg))
+               regulator_disable(st->reg);
+error_put_reg:
+       if (!IS_ERR(st->reg))
+               regulator_put(st->reg);
+
+       if (regdone)
+               iio_device_unregister(indio_dev);
+       else
+               iio_free_device(indio_dev);
+
+       return ret;
+}
+
+static int ad7793_remove(struct spi_device *spi)
+{
+       struct iio_dev *indio_dev = spi_get_drvdata(spi);
+       struct ad7793_state *st = iio_priv(indio_dev);
+
+       iio_ring_buffer_unregister(indio_dev->ring);
+       ad7793_remove_trigger(indio_dev);
+       ad7793_ring_cleanup(indio_dev);
+
+       if (!IS_ERR(st->reg)) {
+               regulator_disable(st->reg);
+               regulator_put(st->reg);
+       }
+
+       iio_device_unregister(indio_dev);
+
+       return 0;
+}
+
+static const struct spi_device_id ad7793_id[] = {
+       {"ad7792", ID_AD7792},
+       {"ad7793", ID_AD7793},
+       {}
+};
+
+static struct spi_driver ad7793_driver = {
+       .driver = {
+               .name   = "ad7793",
+               .bus    = &spi_bus_type,
+               .owner  = THIS_MODULE,
+       },
+       .probe          = ad7793_probe,
+       .remove         = __devexit_p(ad7793_remove),
+       .id_table       = ad7793_id,
+};
+
+static int __init ad7793_init(void)
+{
+       return spi_register_driver(&ad7793_driver);
+}
+module_init(ad7793_init);
+
+static void __exit ad7793_exit(void)
+{
+       spi_unregister_driver(&ad7793_driver);
+}
+module_exit(ad7793_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD7792/3 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/adc/ad7793.h b/drivers/staging/iio/adc/ad7793.h
new file mode 100644 (file)
index 0000000..64f7d41
--- /dev/null
@@ -0,0 +1,107 @@
+/*
+ * AD7792/AD7793 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+#ifndef IIO_ADC_AD7793_H_
+#define IIO_ADC_AD7793_H_
+
+/*
+ * TODO: struct ad7793_platform_data needs to go into include/linux/iio
+ */
+
+/* Registers */
+#define AD7793_REG_COMM                0 /* Communications Register (WO, 8-bit) */
+#define AD7793_REG_STAT                0 /* Status Register         (RO, 8-bit) */
+#define AD7793_REG_MODE                1 /* Mode Register           (RW, 16-bit */
+#define AD7793_REG_CONF                2 /* Configuration Register  (RW, 16-bit) */
+#define AD7793_REG_DATA                3 /* Data Register           (RO, 16-/24-bit) */
+#define AD7793_REG_ID          4 /* ID Register             (RO, 8-bit) */
+#define AD7793_REG_IO          5 /* IO Register             (RO, 8-bit) */
+#define AD7793_REG_OFFSET      6 /* Offset Register         (RW, 16-bit
+                                  * (AD7792)/24-bit (AD7793)) */
+#define AD7793_REG_FULLSALE    7 /* Full-Scale Register
+                                  * (RW, 16-bit (AD7792)/24-bit (AD7793)) */
+
+/* Communications Register Bit Designations (AD7793_REG_COMM) */
+#define AD7793_COMM_WEN                (1 << 7) /* Write Enable */
+#define AD7793_COMM_WRITE      (0 << 6) /* Write Operation */
+#define AD7793_COMM_READ       (1 << 6) /* Read Operation */
+#define AD7793_COMM_ADDR(x)    (((x) & 0x7) << 3) /* Register Address */
+#define AD7793_COMM_CREAD      (1 << 2) /* Continuous Read of Data Register */
+
+/* Status Register Bit Designations (AD7793_REG_STAT) */
+#define AD7793_STAT_RDY                (1 << 7) /* Ready */
+#define AD7793_STAT_ERR                (1 << 6) /* Error (Overrange, Underrange) */
+#define AD7793_STAT_CH3                (1 << 2) /* Channel 3 */
+#define AD7793_STAT_CH2                (1 << 1) /* Channel 2 */
+#define AD7793_STAT_CH1                (1 << 0) /* Channel 1 */
+
+/* Mode Register Bit Designations (AD7793_REG_MODE) */
+#define AD7793_MODE_SEL(x)     (((x) & 0x7) << 13) /* Operation Mode Select */
+#define AD7793_MODE_CLKSRC(x)  (((x) & 0x3) << 6) /* ADC Clock Source Select */
+#define AD7793_MODE_RATE(x)    ((x) & 0xF) /* Filter Update Rate Select */
+
+#define AD7793_MODE_CONT               0 /* Continuous Conversion Mode */
+#define AD7793_MODE_SINGLE             1 /* Single Conversion Mode */
+#define AD7793_MODE_IDLE               2 /* Idle Mode */
+#define AD7793_MODE_PWRDN              3 /* Power-Down Mode */
+#define AD7793_MODE_CAL_INT_ZERO       4 /* Internal Zero-Scale Calibration */
+#define AD7793_MODE_CAL_INT_FULL       5 /* Internal Full-Scale Calibration */
+#define AD7793_MODE_CAL_SYS_ZERO       6 /* System Zero-Scale Calibration */
+#define AD7793_MODE_CAL_SYS_FULL       7 /* System Full-Scale Calibration */
+
+#define AD7793_CLK_INT         0 /* Internal 64 kHz Clock not
+                                  * available at the CLK pin */
+#define AD7793_CLK_INT_CO      1 /* Internal 64 kHz Clock available
+                                  * at the CLK pin */
+#define AD7793_CLK_EXT         2 /* External 64 kHz Clock */
+#define AD7793_CLK_EXT_DIV2    3 /* External Clock divided by 2 */
+
+/* Configuration Register Bit Designations (AD7793_REG_CONF) */
+#define AD7793_CONF_VBIAS(x)   (((x) & 0x3) << 14) /* Bias Voltage
+                                                    * Generator Enable */
+#define AD7793_CONF_BO_EN      (1 << 13) /* Burnout Current Enable */
+#define AD7793_CONF_UNIPOLAR   (1 << 12) /* Unipolar/Bipolar Enable */
+#define AD7793_CONF_BOOST      (1 << 11) /* Boost Enable */
+#define AD7793_CONF_GAIN(x)    (((x) & 0x7) << 8) /* Gain Select */
+#define AD7793_CONF_REFSEL     (1 << 7) /* INT/EXT Reference Select */
+#define AD7793_CONF_BUF                (1 << 4) /* Buffered Mode Enable */
+#define AD7793_CONF_CHAN(x)    ((x) & 0x7) /* Channel select */
+
+#define AD7793_CH_AIN1P_AIN1M  0 /* AIN1(+) - AIN1(-) */
+#define AD7793_CH_AIN2P_AIN2M  1 /* AIN2(+) - AIN2(-) */
+#define AD7793_CH_AIN3P_AIN3M  2 /* AIN3(+) - AIN3(-) */
+#define AD7793_CH_AIN1M_AIN1M  3 /* AIN1(-) - AIN1(-) */
+#define AD7793_CH_TEMP         6 /* Temp Sensor */
+#define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */
+
+/* ID Register Bit Designations (AD7793_REG_ID) */
+#define AD7792_ID              0xA
+#define AD7793_ID              0xB
+#define AD7793_ID_MASK         0xF
+
+/* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */
+#define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2      0 /* IEXC1 connect to IOUT1,
+                                                  * IEXC2 connect to IOUT2 */
+#define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1      1 /* IEXC1 connect to IOUT2,
+                                                  * IEXC2 connect to IOUT1 */
+#define AD7793_IO_IEXC1_IEXC2_IOUT1            2 /* Both current sources
+                                                  * IEXC1,2 connect to IOUT1 */
+#define AD7793_IO_IEXC1_IEXC2_IOUT2            3 /* Both current sources
+                                                  * IEXC1,2 connect to IOUT2 */
+
+#define AD7793_IO_IXCEN_10uA   (1 << 0) /* Excitation Current 10uA */
+#define AD7793_IO_IXCEN_210uA  (2 << 0) /* Excitation Current 210uA */
+#define AD7793_IO_IXCEN_1mA    (3 << 0) /* Excitation Current 1mA */
+
+struct ad7793_platform_data {
+       u16                     vref_mv;
+       u16                     mode;
+       u16                     conf;
+       u8                      io;
+};
+
+#endif /* IIO_ADC_AD7793_H_ */