ATMEL AT91 MCI DRIVER
P: Nicolas Ferre
-M: nicolas.ferre@rfo.atmel.com
+M: nicolas.ferre@atmel.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
S: Maintained
+ATMEL LCDFB DRIVER
+P: Nicolas Ferre
+M: nicolas.ferre@atmel.com
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
+S: Maintained
+
ATMEL MACB ETHERNET DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
S: Maintained
NETXEN (1/10) GbE SUPPORT
-P: Amit S. Kale
-M: amitkale@netxen.com
+P: Dhananjay Phadke
+M: dhananjay@netxen.com
L: netdev@vger.kernel.org
W: http://www.netxen.com
S: Supported
S: Supported
SPIDERNET NETWORK DRIVER for CELL
-P: Linas Vepstas
-M: linas@austin.ibm.com
+P: Ishizaki Kou
+M: kou.ishizaki@toshiba.co.jp
+P: Jens Osterkamp
+M: jens@de.ibm.com
L: netdev@vger.kernel.org
S: Supported
* OP_SCALAR - this operation always operates in scalar mode
* OP_SD - the instruction exceptionally writes to a single precision result.
* OP_DD - the instruction exceptionally writes to a double precision result.
+ * OP_SM - the instruction exceptionally reads from a single precision operand.
*/
#define OP_SCALAR (1 << 0)
#define OP_SD (1 << 1)
#define OP_DD (1 << 1)
+#define OP_SM (1 << 2)
struct op {
u32 (* const fn)(int dd, int dn, int dm, u32 fpscr);
[FEXT_TO_IDX(FEXT_FCMPZ)] = { vfp_double_fcmpz, OP_SCALAR },
[FEXT_TO_IDX(FEXT_FCMPEZ)] = { vfp_double_fcmpez, OP_SCALAR },
[FEXT_TO_IDX(FEXT_FCVT)] = { vfp_double_fcvts, OP_SCALAR|OP_SD },
- [FEXT_TO_IDX(FEXT_FUITO)] = { vfp_double_fuito, OP_SCALAR },
- [FEXT_TO_IDX(FEXT_FSITO)] = { vfp_double_fsito, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FUITO)] = { vfp_double_fuito, OP_SCALAR|OP_SM },
+ [FEXT_TO_IDX(FEXT_FSITO)] = { vfp_double_fsito, OP_SCALAR|OP_SM },
[FEXT_TO_IDX(FEXT_FTOUI)] = { vfp_double_ftoui, OP_SCALAR|OP_SD },
[FEXT_TO_IDX(FEXT_FTOUIZ)] = { vfp_double_ftouiz, OP_SCALAR|OP_SD },
[FEXT_TO_IDX(FEXT_FTOSI)] = { vfp_double_ftosi, OP_SCALAR|OP_SD },
u32 exceptions = 0;
unsigned int dest;
unsigned int dn = vfp_get_dn(inst);
- unsigned int dm = vfp_get_dm(inst);
+ unsigned int dm;
unsigned int vecitr, veclen, vecstride;
struct op *fop;
else
dest = vfp_get_dd(inst);
+ /*
+ * f[us]ito takes a sN operand, not a dN operand.
+ */
+ if (fop->flags & OP_SM)
+ dm = vfp_get_sm(inst);
+ else
+ dm = vfp_get_dm(inst);
+
/*
* If destination bank is zero, vector length is always '1'.
* ARM DDI0100F C5.1.3, C5.3.2.
*!
*! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init
*!
-*! $Log: ds1302.c,v $
-*! Revision 1.18 2005/01/24 09:11:26 mikaelam
-*! Minor changes to get DS1302 RTC chip driver to work
-*!
-*! Revision 1.17 2005/01/05 06:11:22 starvik
-*! No need to do local_irq_disable after local_irq_save.
-*!
-*! Revision 1.16 2004/12/13 12:21:52 starvik
-*! Added I/O and DMA allocators from Linux 2.4
-*!
-*! Revision 1.14 2004/08/24 06:48:43 starvik
-*! Whitespace cleanup
-*!
-*! Revision 1.13 2004/05/28 09:26:59 starvik
-*! Modified I2C initialization to work in 2.6.
-*!
-*! Revision 1.12 2004/05/14 07:58:03 starvik
-*! Merge of changes from 2.4
-*!
-*! Revision 1.10 2004/02/04 09:25:12 starvik
-*! Merge of Linux 2.6.2
-*!
-*! Revision 1.9 2003/07/04 08:27:37 starvik
-*! Merge of Linux 2.5.74
-*!
-*! Revision 1.8 2003/04/09 05:20:47 starvik
-*! Merge of Linux 2.5.67
-*!
-*! Revision 1.6 2003/01/09 14:42:51 starvik
-*! Merge of Linux 2.5.55
-*!
-*! Revision 1.4 2002/12/11 13:13:57 starvik
-*! Added arch/ to v10 specific includes
-*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
-*!
-*! Revision 1.3 2002/11/20 11:56:10 starvik
-*! Merge of Linux 2.5.48
-*!
-*! Revision 1.2 2002/11/18 13:16:06 starvik
-*! Linux 2.5 port of latest 2.4 drivers
-*!
-*! Revision 1.15 2002/10/11 16:14:33 johana
-*! Added CONFIG_ETRAX_DS1302_TRICKLE_CHARGE and initial setting of the
-*! trcklecharge register.
-*!
-*! Revision 1.14 2002/10/10 12:15:38 magnusmn
-*! Added support for having the RST signal on bit g0
-*!
-*! Revision 1.13 2002/05/29 15:16:08 johana
-*! Removed unused variables.
-*!
-*! Revision 1.12 2002/04/10 15:35:25 johana
-*! Moved probe function closer to init function and marked it __init.
-*!
-*! Revision 1.11 2001/06/14 12:35:52 jonashg
-*! The ATA hack is back. It is unfortunately the only way to set g27 to output.
-*!
-*! Revision 1.9 2001/06/14 10:00:14 jonashg
-*! No need for tempudelay to be inline anymore (had to adjust the usec to
-*! loops conversion because of this to make it slow enough to be a udelay).
-*!
-*! Revision 1.8 2001/06/14 08:06:32 jonashg
-*! Made tempudelay delay usecs (well, just a tad more).
-*!
-*! Revision 1.7 2001/06/13 14:18:11 jonashg
-*! Only allow processes with SYS_TIME capability to set time and charge.
-*!
-*! Revision 1.6 2001/06/12 15:22:07 jonashg
-*! * Made init function __init.
-*! * Parameter to out_byte() is unsigned char.
-*! * The magic number 42 has got a name.
-*! * Removed comment about /proc (nothing is exported there).
-*!
-*! Revision 1.5 2001/06/12 14:35:13 jonashg
-*! Gave the module a name and added it to printk's.
-*!
-*! Revision 1.4 2001/05/31 14:53:40 jonashg
-*! Made tempudelay() inline so that the watchdog doesn't reset (see
-*! function comment).
-*!
-*! Revision 1.3 2001/03/26 16:03:06 bjornw
-*! Needs linux/config.h
-*!
-*! Revision 1.2 2001/03/20 19:42:00 bjornw
-*! Use the ETRAX prefix on the DS1302 options
-*!
-*! Revision 1.1 2001/03/20 09:13:50 magnusmn
-*! Linux 2.4 port
-*!
-*! Revision 1.10 2000/07/05 15:38:23 bjornw
-*! Dont update kernel time when a RTC_SET_TIME is done
-*!
-*! Revision 1.9 2000/03/02 15:42:59 macce
-*! * Hack to make RTC work on all 2100/2400
-*!
-*! Revision 1.8 2000/02/23 16:59:18 torbjore
-*! added setup of R_GEN_CONFIG when RTC is connected to the generic port.
-*!
-*! Revision 1.7 2000/01/17 15:51:43 johana
-*! Added RTC_SET_CHARGE ioctl to enable trickle charger.
-*!
-*! Revision 1.6 1999/10/27 13:19:47 bjornw
-*! Added update_xtime_from_cmos which reads back the updated RTC into the kernel.
-*! /dev/rtc calls it now.
-*!
-*! Revision 1.5 1999/10/27 12:39:37 bjornw
-*! Disabled superuser check. Anyone can now set the time.
-*!
-*! Revision 1.4 1999/09/02 13:27:46 pkj
-*! Added shadow for R_PORT_PB_CONFIG.
-*! Renamed port_g_shadow to port_g_data_shadow.
-*!
-*! Revision 1.3 1999/09/02 08:28:06 pkj
-*! Made it possible to select either port PB or the generic port for the RST
-*! signal line to the DS1302 RTC.
-*! Also make sure the RST bit is configured as output on Port PB (if used).
-*!
-*! Revision 1.2 1999/09/01 14:47:20 bjornw
-*! Added support for /dev/rtc operations with ioctl RD_TIME and SET_TIME to read
-*! and set the date. Register as major 121.
-*!
-*! Revision 1.1 1999/09/01 09:45:29 bjornw
-*! Implemented a DS1302 RTC driver.
-*!
-*!
*! ---------------------------------------------------------------------------
*!
-*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB, LUND, SWEDEN
-*!
-*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $
+*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN
*!
*!***************************************************************************/
#include <asm/rtc.h>
#include <asm/arch/io_interface_mux.h>
+#include "i2c.h"
+
#define RTC_MAJOR_NR 121 /* local major, change later */
static const char ds1302_name[] = "ds1302";
*
* Ideas also taken from arch/arm.
*
- * Copyright (C) 2000, 2001 Axis Communications AB
+ * Copyright (C) 2000-2007 Axis Communications AB
*
* Authors: Bjorn Wesen (bjornw@axis.com)
*
*/
#define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->irp -= 2;
-int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
+void do_signal(int canrestart, struct pt_regs *regs);
/*
- * Atomically swap in the new signal mask, and wait for a signal. Define
+ * Atomically swap in the new signal mask, and wait for a signal. Define
* dummy arguments to be able to reach the regs argument. (Note that this
* arrangement relies on old_sigset_t occupying one register.)
*/
-int
-sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
- long srp, struct pt_regs *regs)
+int sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
+ long srp, struct pt_regs *regs)
{
- sigset_t saveset;
-
mask &= _BLOCKABLE;
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
siginitset(¤t->blocked, mask);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
-
- regs->r10 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(0, &saveset, regs))
- /* We will get here twice: once to call the signal
- handler, then again to return from the
- sigsuspend system call. When calling the
- signal handler, R10 holds the signal number as
- set through do_signal. The sigsuspend call
- will return with the restored value set above;
- always -EINTR. */
- return regs->r10;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
-/* Define dummy arguments to be able to reach the regs argument. (Note that
- * this arrangement relies on size_t occupying one register.)
- */
-int
-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13,
- long mof, long srp, struct pt_regs *regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- regs->r10 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(0, &saveset, regs))
- /* We will get here twice: once to call the signal
- handler, then again to return from the
- sigsuspend system call. When calling the
- signal handler, R10 holds the signal number as
- set through do_signal. The sigsuspend call
- will return with the restored value set above;
- always -EINTR. */
- return regs->r10;
- }
-}
-
-int
-sys_sigaction(int sig, const struct old_sigaction __user *act,
- struct old_sigaction *oact)
+int sys_sigaction(int sig, const struct old_sigaction __user *act,
+ struct old_sigaction *oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
return ret;
}
-int
-sys_sigaltstack(const stack_t *uss, stack_t __user *uoss)
+int sys_sigaltstack(const stack_t *uss, stack_t __user *uoss)
{
return do_sigaltstack(uss, uoss, rdusp());
}
/* TODO: the other ports use regs->orig_XX to disable syscall checks
* after this completes, but we don't use that mechanism. maybe we can
- * use it now ?
+ * use it now ?
*/
return err;
/* Define dummy arguments to be able to reach the regs argument. */
-asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
+asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
long srp, struct pt_regs *regs)
{
struct sigframe __user *frame = (struct sigframe *)rdusp();
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
-
+
if (restore_sigcontext(regs, &frame->sc))
goto badframe;
badframe:
force_sig(SIGSEGV, current);
return 0;
-}
+}
/* Define dummy arguments to be able to reach the regs argument. */
-asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
+asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
long mof, long srp, struct pt_regs *regs)
{
struct rt_sigframe __user *frame = (struct rt_sigframe *)rdusp();
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
-
+
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
badframe:
force_sig(SIGSEGV, current);
return 0;
-}
+}
/*
* Set up a signal frame.
*/
-static int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask)
+static int setup_sigcontext(struct sigcontext __user *sc,
+ struct pt_regs *regs, unsigned long mask)
{
int err = 0;
unsigned long usp = rdusp();
return err;
}
-/* figure out where we want to put the new signal frame - usually on the stack */
+/* Figure out where we want to put the new signal frame
+ * - usually on the stack. */
static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
{
unsigned long sp = rdusp();
}
/* grab and setup a signal frame.
- *
+ *
* basically we stack a lot of state info, and arrange for the
* user-mode program to return to the kernel using either a
* trampoline which performs the syscall sigreturn, or a provided
* user-mode trampoline.
*/
-static void setup_frame(int sig, struct k_sigaction *ka,
- sigset_t *set, struct pt_regs * regs)
+static int setup_frame(int sig, struct k_sigaction *ka,
+ sigset_t *set, struct pt_regs *regs)
{
struct sigframe __user *frame;
unsigned long return_ip;
wrusp((unsigned long)frame);
- return;
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
+ return -EFAULT;
}
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs * regs)
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
unsigned long return_ip;
/* trampoline - the desired return ip is the retcode itself */
return_ip = (unsigned long)&frame->retcode;
/* This is movu.w __NR_rt_sigreturn, r9; break 13; */
- err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0));
- err |= __put_user(__NR_rt_sigreturn, (short __user*)(frame->retcode+2));
- err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
+ err |= __put_user(0x9c5f, (short __user *)(frame->retcode+0));
+ err |= __put_user(__NR_rt_sigreturn,
+ (short __user *)(frame->retcode+2));
+ err |= __put_user(0xe93d, (short __user *)(frame->retcode+4));
}
if (err)
/* Set up registers for signal handler */
- regs->irp = (unsigned long) ka->sa.sa_handler; /* what we enter NOW */
- regs->srp = return_ip; /* what we enter LATER */
- regs->r10 = sig; /* first argument is signo */
- regs->r11 = (unsigned long) &frame->info; /* second argument is (siginfo_t *) */
- regs->r12 = 0; /* third argument is unused */
-
- /* actually move the usp to reflect the stacked frame */
-
+ /* What we enter NOW */
+ regs->irp = (unsigned long) ka->sa.sa_handler;
+ /* What we enter LATER */
+ regs->srp = return_ip;
+ /* First argument is signo */
+ regs->r10 = sig;
+ /* Second argument is (siginfo_t *) */
+ regs->r11 = (unsigned long)&frame->info;
+ /* Third argument is unused */
+ regs->r12 = 0;
+
+ /* Actually move the usp to reflect the stacked frame */
wrusp((unsigned long)frame);
- return;
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
+ return -EFAULT;
}
/*
* OK, we're invoking a handler
- */
+ */
-static inline void
-handle_signal(int canrestart, unsigned long sig,
- siginfo_t *info, struct k_sigaction *ka,
- sigset_t *oldset, struct pt_regs * regs)
+static inline int handle_signal(int canrestart, unsigned long sig,
+ siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs *regs)
{
+ int ret;
+
/* Are we from a system call? */
if (canrestart) {
/* If so, check system call restarting.. */
switch (regs->r10) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- /* ERESTARTNOHAND means that the syscall should only be
- restarted if there was no handler for the signal, and since
- we only get here if there is a handler, we don't restart */
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ /* ERESTARTNOHAND means that the syscall should
+ * only be restarted if there was no handler for
+ * the signal, and since we only get here if there
+ * is a handler, we don't restart */
+ regs->r10 = -EINTR;
+ break;
+ case -ERESTARTSYS:
+ /* ERESTARTSYS means to restart the syscall if
+ * there is no handler or the handler was
+ * registered with SA_RESTART */
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->r10 = -EINTR;
break;
-
- case -ERESTARTSYS:
- /* ERESTARTSYS means to restart the syscall if there is no
- handler or the handler was registered with SA_RESTART */
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- regs->r10 = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- /* ERESTARTNOINTR means that the syscall should be called again
- after the signal handler returns. */
- RESTART_CRIS_SYS(regs);
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ /* ERESTARTNOINTR means that the syscall should
+ * be called again after the signal handler returns. */
+ RESTART_CRIS_SYS(regs);
}
}
/* Set up the stack frame */
if (ka->sa.sa_flags & SA_SIGINFO)
- setup_rt_frame(sig, ka, info, oldset, regs);
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
else
- setup_frame(sig, ka, oldset, regs);
-
- if (ka->sa.sa_flags & SA_ONESHOT)
- ka->sa.sa_handler = SIG_DFL;
-
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
- if (!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(¤t->blocked,sig);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ ret = setup_frame(sig, ka, oldset, regs);
+
+ if (ret == 0) {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked, ¤t->blocked,
+ &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+ return ret;
}
/*
* mode below.
*/
-int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
+void do_signal(int canrestart, struct pt_regs *regs)
{
siginfo_t info;
int signr;
struct k_sigaction ka;
+ sigset_t *oldset;
/*
* We want the common case to go fast, which
* if so.
*/
if (!user_mode(regs))
- return 1;
+ return;
- if (!oldset)
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
- handle_signal(canrestart, signr, &info, &ka, oldset, regs);
- return 1;
+ if (handle_signal(canrestart, signr, &info, &ka,
+ oldset, regs)) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+ return;
}
/* Did we come from a system call? */
regs->r10 == -ERESTARTNOINTR) {
RESTART_CRIS_SYS(regs);
}
- if (regs->r10 == -ERESTART_RESTARTBLOCK){
+ if (regs->r10 == -ERESTART_RESTARTBLOCK) {
regs->r10 = __NR_restart_syscall;
regs->irp -= 2;
}
}
- return 0;
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
}
#include <linux/swap.h>
#include <linux/sched.h>
#include <linux/init.h>
+#include <linux/vmstat.h>
#include <asm/arch/svinto.h>
#include <asm/types.h>
#include <asm/signal.h>
select SYS_SUPPORTS_LITTLE_ENDIAN
select SSB
select SSB_DRIVER_MIPS
+ select SSB_DRIVER_EXTIF
+ select SSB_PCICORE_HOSTMODE if PCI
select GENERIC_GPIO
select SYS_HAS_EARLY_PRINTK
select CFE
#include <linux/io.h>
#include <linux/serial_reg.h>
+#include <cobalt.h>
+
#define UART_BASE ((void __iomem *)CKSEG1ADDR(0x1c800000))
void prom_putchar(char c)
{
+ if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
+ return;
+
while (!(readb(UART_BASE + UART_LSR) & UART_LSR_THRE))
;
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- if (cobalt_board_id < COBALT_BRD_ID_QUBE2)
+ if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
return irq_tab_qube1[slot];
if (cobalt_board_id == COBALT_BRD_ID_RAQ2)
unsigned long flags;
struct scatterlist *s, *outs, *segstart;
int outcount, incount, i;
+ unsigned int align;
unsigned long handle;
BUG_ON(direction == DMA_NONE);
/* Allocate iommu entries for that segment */
vaddr = (unsigned long) sg_virt(s);
npages = iommu_num_pages(vaddr, slen);
- entry = iommu_range_alloc(tbl, npages, &handle, mask >> IOMMU_PAGE_SHIFT, 0);
+ align = 0;
+ if (IOMMU_PAGE_SHIFT < PAGE_SHIFT && slen >= PAGE_SIZE &&
+ (vaddr & ~PAGE_MASK) == 0)
+ align = PAGE_SHIFT - IOMMU_PAGE_SHIFT;
+ entry = iommu_range_alloc(tbl, npages, &handle,
+ mask >> IOMMU_PAGE_SHIFT, align);
DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen);
{
dma_addr_t dma_handle = DMA_ERROR_CODE;
unsigned long uaddr;
- unsigned int npages;
+ unsigned int npages, align;
BUG_ON(direction == DMA_NONE);
npages = iommu_num_pages(uaddr, size);
if (tbl) {
+ align = 0;
+ if (IOMMU_PAGE_SHIFT < PAGE_SHIFT && size >= PAGE_SIZE &&
+ ((unsigned long)vaddr & ~PAGE_MASK) == 0)
+ align = PAGE_SHIFT - IOMMU_PAGE_SHIFT;
+
dma_handle = iommu_alloc(tbl, vaddr, npages, direction,
- mask >> IOMMU_PAGE_SHIFT, 0);
+ mask >> IOMMU_PAGE_SHIFT, align);
if (dma_handle == DMA_ERROR_CODE) {
if (printk_ratelimit()) {
printk(KERN_INFO "iommu_alloc failed, "
prom_printf("fixup_device_tree_efika: ",
"skipped entry %x - setprop error\n", i);
}
+
+ /* Make sure ethernet mdio bus node exists */
+ node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio"));
+ if (!PHANDLE_VALID(node)) {
+ prom_printf("Adding Ethernet MDIO node\n");
+ call_prom("interpret", 1, 1,
+ " s\" /builtin\" find-device"
+ " new-device"
+ " 1 encode-int s\" #address-cells\" property"
+ " 0 encode-int s\" #size-cells\" property"
+ " s\" mdio\" 2dup device-name device-type"
+ " s\" mpc5200b-fec-phy\" encode-string"
+ " s\" compatible\" property"
+ " 0xf0003000 0x400 reg"
+ " 0x2 encode-int"
+ " 0x5 encode-int encode+"
+ " 0x3 encode-int encode+"
+ " s\" interrupts\" property"
+ " finish-device");
+ };
+
+ /* Make sure ethernet phy device node exist */
+ node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio/ethernet-phy"));
+ if (!PHANDLE_VALID(node)) {
+ prom_printf("Adding Ethernet PHY node\n");
+ call_prom("interpret", 1, 1,
+ " s\" /builtin/mdio\" find-device"
+ " new-device"
+ " s\" ethernet-phy\" device-name"
+ " 0x10 encode-int s\" reg\" property"
+ " my-self"
+ " ihandle>phandle"
+ " finish-device"
+ " s\" /builtin/ethernet\" find-device"
+ " encode-int"
+ " s\" phy-handle\" property"
+ " device-end");
+ }
+
}
#else
#define fixup_device_tree_efika()
create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
+ slb_shadow_clear(2);
+
/* We don't bolt the stack for the time being - we're in boot,
* so the stack is in the bolted segment. By the time it goes
* elsewhere, we'll call _switch() which will bolt in the new
#include <asm/vdso_datapage.h>
#include <asm/pSeries_reconfig.h>
#include "xics.h"
+#include "plpar_wrappers.h"
/* This version can't take the spinlock, because it never returns */
static struct rtas_args rtas_stop_self_args = {
local_irq_disable();
idle_task_exit();
xics_teardown_cpu(0);
+ unregister_slb_shadow(hard_smp_processor_id(), __pa(get_slb_shadow()));
rtas_stop_self();
/* Should never get here... */
BUG();
apm_info.disabled = 1;
return -ENODEV;
}
- if (PM_IS_ACTIVE()) {
+ if (pm_flags & PM_ACPI) {
printk(KERN_NOTICE "apm: overridden by ACPI.\n");
apm_info.disabled = 1;
return -ENODEV;
}
-#ifdef CONFIG_PM_LEGACY
- pm_active = 1;
-#endif
+ pm_flags |= PM_APM;
/*
* Set up a segment that references the real mode segment 0x40
kthread_stop(kapmd_task);
kapmd_task = NULL;
}
-#ifdef CONFIG_PM_LEGACY
- pm_active = 0;
-#endif
+ pm_flags &= ~PM_APM;
}
module_init(apm_init);
}
}
+static void do_nothing(void *unused)
+{
+}
+
void cpu_idle_wait(void)
{
unsigned int cpu, this_cpu = get_cpu();
cpu_clear(cpu, map);
}
cpus_and(map, map, cpu_online_map);
+ /*
+ * We waited 1 sec, if a CPU still did not call idle
+ * it may be because it is in idle and not waking up
+ * because it has nothing to do.
+ * Give all the remaining CPUS a kick.
+ */
+ smp_call_function_mask(map, do_nothing, 0, 0);
} while (!cpus_empty(map));
set_cpus_allowed(current, tmp);
cpu_relax();
}
+static void do_nothing(void *unused)
+{
+}
+
void cpu_idle_wait(void)
{
unsigned int cpu, this_cpu = get_cpu();
cpu_clear(cpu, map);
}
cpus_and(map, map, cpu_online_map);
+ /*
+ * We waited 1 sec, if a CPU still did not call idle
+ * it may be because it is in idle and not waking up
+ * because it has nothing to do.
+ * Give all the remaining CPUS a kick.
+ */
+ smp_call_function_mask(map, do_nothing, 0, 0);
} while (!cpus_empty(map));
set_cpus_allowed(current, tmp);
and functions, which do not yet exist in /sys
Say N to delete power /proc/acpi/ folders that have moved to /sys/
+config ACPI_SYSFS_POWER
+ bool "Future power /sys interface"
+ select POWER_SUPPLY
+ default y
+ ---help---
+ Say N to disable power /sys interface
config ACPI_PROC_EVENT
bool "Deprecated /proc/acpi/event support"
depends on PROC_FS
config ACPI_AC
tristate "AC Adapter"
depends on X86
- select POWER_SUPPLY
default y
help
This driver adds support for the AC Adapter object, which indicates
config ACPI_BATTERY
tristate "Battery"
depends on X86
- select POWER_SUPPLY
default y
help
This driver adds support for battery information through
config ACPI_SBS
tristate "Smart Battery System"
depends on X86
- select POWER_SUPPLY
help
This driver adds support for the Smart Battery System, another
type of access to battery information, found on some laptops.
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#endif
+#ifdef CONFIG_ACPI_SYSFS_POWER
#include <linux/power_supply.h>
+#endif
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
};
struct acpi_ac {
+#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply charger;
+#endif
struct acpi_device * device;
unsigned long state;
};
.release = single_release,
};
#endif
-
+#ifdef CONFIG_ACPI_SYSFS_POWER
static int get_ac_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
static enum power_supply_property ac_props[] = {
POWER_SUPPLY_PROP_ONLINE,
};
-
+#endif
/* --------------------------------------------------------------------------
AC Adapter Management
-------------------------------------------------------------------------- */
acpi_bus_generate_netlink_event(device->pnp.device_class,
device->dev.bus_id, event,
(u32) ac->state);
+#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
+#endif
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
#endif
if (result)
goto end;
+#ifdef CONFIG_ACPI_SYSFS_POWER
ac->charger.name = acpi_device_bid(device);
ac->charger.type = POWER_SUPPLY_TYPE_MAINS;
ac->charger.properties = ac_props;
ac->charger.num_properties = ARRAY_SIZE(ac_props);
ac->charger.get_property = get_ac_property;
power_supply_register(&ac->device->dev, &ac->charger);
+#endif
status = acpi_install_notify_handler(device->handle,
ACPI_ALL_NOTIFY, acpi_ac_notify,
ac);
old_state = ac->state;
if (acpi_ac_get_state(ac))
return 0;
+#ifdef CONFIG_ACPI_SYSFS_POWER
if (old_state != ac->state)
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
+#endif
return 0;
}
status = acpi_remove_notify_handler(device->handle,
ACPI_ALL_NOTIFY, acpi_ac_notify);
+#ifdef CONFIG_ACPI_SYSFS_POWER
if (ac->charger.dev)
power_supply_unregister(&ac->charger);
+#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_ac_remove_fs(device);
#endif
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#ifdef CONFIG_ACPI_SYSFS_POWER
#include <linux/power_supply.h>
+#endif
#define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF
struct acpi_battery {
struct mutex lock;
+#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply bat;
+#endif
struct acpi_device *device;
unsigned long update_time;
int current_now;
return battery->device->status.battery_present;
}
+#ifdef CONFIG_ACPI_SYSFS_POWER
static int acpi_battery_technology(struct acpi_battery *battery)
{
if (!strcasecmp("NiCd", battery->type))
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
};
+#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
inline char *acpi_battery_units(struct acpi_battery *battery)
return acpi_battery_set_alarm(battery);
}
+#ifdef CONFIG_ACPI_SYSFS_POWER
static ssize_t acpi_battery_alarm_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int result;
- battery->update_time = 0;
- result = acpi_battery_get_info(battery);
- acpi_battery_init_alarm(battery);
- if (result)
- return result;
if (battery->power_unit) {
battery->bat.properties = charge_battery_props;
battery->bat.num_properties =
power_supply_unregister(&battery->bat);
battery->bat.dev = NULL;
}
+#endif
static int acpi_battery_update(struct acpi_battery *battery)
{
- int result = acpi_battery_get_status(battery);
+ int result;
+ result = acpi_battery_get_status(battery);
if (result)
return result;
+#ifdef CONFIG_ACPI_SYSFS_POWER
if (!acpi_battery_present(battery)) {
sysfs_remove_battery(battery);
+ battery->update_time = 0;
return 0;
}
+#endif
+ if (!battery->update_time) {
+ result = acpi_battery_get_info(battery);
+ if (result)
+ return result;
+ acpi_battery_init_alarm(battery);
+ }
+#ifdef CONFIG_ACPI_SYSFS_POWER
if (!battery->bat.dev)
sysfs_add_battery(battery);
+#endif
return acpi_battery_get_state(battery);
}
acpi_bus_generate_netlink_event(device->pnp.device_class,
device->dev.bus_id, event,
acpi_battery_present(battery));
+#ifdef CONFIG_ACPI_SYSFS_POWER
/* acpi_batter_update could remove power_supply object */
if (battery->bat.dev)
kobject_uevent(&battery->bat.dev->kobj, KOBJ_CHANGE);
+#endif
}
static int acpi_battery_add(struct acpi_device *device)
#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_battery_remove_fs(device);
#endif
+#ifdef CONFIG_ACPI_SYSFS_POWER
sysfs_remove_battery(battery);
+#endif
mutex_destroy(&battery->lock);
kfree(battery);
return 0;
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/pm.h>
-#include <linux/pm_legacy.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
#ifdef CONFIG_X86
result = acpi_bus_init();
if (!result) {
-#ifdef CONFIG_PM_LEGACY
- if (!PM_IS_ACTIVE())
- pm_active = 1;
+ if (!(pm_flags & PM_APM))
+ pm_flags |= PM_ACPI;
else {
printk(KERN_INFO PREFIX
"APM is already active, exiting\n");
disable_acpi();
result = -ENODEV;
}
-#endif
} else
disable_acpi();
return 0;
}
+int __init acpi_boot_ec_enable(void)
+{
+ if (!boot_ec || boot_ec->handlers_installed)
+ return 0;
+ if (!ec_install_handlers(boot_ec)) {
+ first_ec = boot_ec;
+ return 0;
+ }
+ return -EFAULT;
+}
+
int __init acpi_ec_ecdt_probe(void)
{
int ret;
goto error;
/* We really need to limit this workaround, the only ASUS,
* which needs it, has fake EC._INI method, so use it as flag.
+ * Keep boot_ec struct as it will be needed soon.
*/
if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &x)))
- goto error;
+ return -ENODEV;
}
ret = ec_install_handlers(boot_ec);
* setup will potentially execute control methods
* (e.g., _REG method for this region)
*/
- acpi_ex_relinquish_interpreter();
+ acpi_ex_exit_interpreter();
status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
handler_desc->address_space.context,
/* Re-enter the interpreter */
- acpi_ex_reacquire_interpreter();
+ acpi_ex_enter_interpreter();
/* Check for failure of the Region Setup */
* exit the interpreter because the handler *might* block -- we don't
* know what it will do, so we can't hold the lock on the intepreter.
*/
- acpi_ex_relinquish_interpreter();
+ acpi_ex_exit_interpreter();
}
/* Call the handler */
* We just returned from a non-default handler, we must re-enter the
* interpreter
*/
- acpi_ex_reacquire_interpreter();
+ acpi_ex_enter_interpreter();
}
return_ACPI_STATUS(status);
&polarity, &link,
acpi_pci_allocate_irq);
+ if (irq < 0) {
+ /*
+ * IDE legacy mode controller IRQs are magic. Why do compat
+ * extensions always make such a nasty mess.
+ */
+ if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
+ (dev->class & 0x05) == 0)
+ return 0;
+ }
/*
* No IRQ known to the ACPI subsystem - maybe the BIOS /
* driver reported one, then use it. Exit in any case.
#define PM_TIMER_TICKS_TO_US(p) (((p) * 1000)/(PM_TIMER_FREQUENCY/1000))
static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
+#ifdef CONFIG_CPU_IDLE
module_param(max_cstate, uint, 0000);
+#else
+module_param(max_cstate, uint, 0644);
+#endif
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);
#include <linux/jiffies.h>
#include <linux/delay.h>
+#ifdef CONFIG_ACPI_SYSFS_POWER
#include <linux/power_supply.h>
+#endif
#include "sbshc.h"
MODULE_DEVICE_TABLE(acpi, sbs_device_ids);
struct acpi_battery {
+#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply bat;
+#endif
struct acpi_sbs *sbs;
#ifdef CONFIG_ACPI_PROCFS_POWER
struct proc_dir_entry *proc_entry;
#define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
struct acpi_sbs {
+#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply charger;
+#endif
struct acpi_device *device;
struct acpi_smb_hc *hc;
struct mutex lock;
acpi_battery_ipscale(battery);
}
+#ifdef CONFIG_ACPI_SYSFS_POWER
static int sbs_get_ac_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
};
+#endif
/* --------------------------------------------------------------------------
Smart Battery System Management
return result;
}
+#ifdef CONFIG_ACPI_SYSFS_POWER
static ssize_t acpi_battery_alarm_show(struct device *dev,
struct device_attribute *attr,
char *buf)
.show = acpi_battery_alarm_show,
.store = acpi_battery_alarm_store,
};
+#endif
/* --------------------------------------------------------------------------
FS Interface (/proc/acpi)
&acpi_battery_state_fops, &acpi_battery_alarm_fops,
battery);
#endif
+#ifdef CONFIG_ACPI_SYSFS_POWER
battery->bat.name = battery->name;
battery->bat.type = POWER_SUPPLY_TYPE_BATTERY;
if (!acpi_battery_mode(battery)) {
goto end;
battery->have_sysfs_alarm = 1;
end:
+#endif
printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n",
ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
battery->name, sbs->battery->present ? "present" : "absent");
static void acpi_battery_remove(struct acpi_sbs *sbs, int id)
{
struct acpi_battery *battery = &sbs->battery[id];
-
+#ifdef CONFIG_ACPI_SYSFS_POWER
if (battery->bat.dev) {
if (battery->have_sysfs_alarm)
device_remove_file(battery->bat.dev, &alarm_attr);
power_supply_unregister(&battery->bat);
}
+#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
if (battery->proc_entry)
acpi_sbs_remove_fs(&battery->proc_entry, acpi_battery_dir);
if (result)
goto end;
#endif
+#ifdef CONFIG_ACPI_SYSFS_POWER
sbs->charger.name = "sbs-charger";
sbs->charger.type = POWER_SUPPLY_TYPE_MAINS;
sbs->charger.properties = sbs_ac_props;
sbs->charger.num_properties = ARRAY_SIZE(sbs_ac_props);
sbs->charger.get_property = sbs_get_ac_property;
power_supply_register(&sbs->device->dev, &sbs->charger);
+#endif
printk(KERN_INFO PREFIX "%s [%s]: AC Adapter [%s] (%s)\n",
ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
ACPI_AC_DIR_NAME, sbs->charger_present ? "on-line" : "off-line");
static void acpi_charger_remove(struct acpi_sbs *sbs)
{
+#ifdef CONFIG_ACPI_SYSFS_POWER
if (sbs->charger.dev)
power_supply_unregister(&sbs->charger);
+#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
if (sbs->charger_entry)
acpi_sbs_remove_fs(&sbs->charger_entry, acpi_ac_dir);
ACPI_SBS_NOTIFY_STATUS,
sbs->charger_present);
#endif
+#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&sbs->charger.dev->kobj, KOBJ_CHANGE);
+#endif
}
if (sbs->manager_present) {
for (id = 0; id < MAX_SBS_BAT; ++id) {
ACPI_SBS_NOTIFY_STATUS,
bat->present);
#endif
+#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&bat->bat.dev->kobj, KOBJ_CHANGE);
+#endif
}
}
}
return result;
}
+int __init acpi_boot_ec_enable(void);
+
static int __init acpi_scan_init(void)
{
int result;
* Enumerate devices in the ACPI namespace.
*/
result = acpi_bus_scan_fixed(acpi_root);
+
+ /* EC region might be needed at bus_scan, so enable it now */
+ acpi_boot_ec_enable();
+
if (!result)
result = acpi_bus_scan(acpi_root, &ops);
ich8_2port_sata,
ich8m_apple_sata_ahci, /* locks up on second port enable */
tolapai_sata_ahci,
+ piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
/* constants for mapping table */
P0 = 0, /* port 0 */
static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static int ich_pata_cable_detect(struct ata_port *ap);
+static u8 piix_vmw_bmdma_status(struct ata_port *ap);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
static const struct pci_device_id piix_pci_tbl[] = {
/* Intel PIIX3 for the 430HX etc */
{ 0x8086, 0x7010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_mwdma },
+ /* VMware ICH4 */
+ { 0x8086, 0x7111, 0x15ad, 0x1976, 0, 0, piix_pata_vmw },
/* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
/* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
.port_start = ata_port_start,
};
+static const struct ata_port_operations piix_vmw_ops = {
+ .set_piomode = piix_set_piomode,
+ .set_dmamode = piix_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = piix_vmw_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_data_xfer,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = piix_pata_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_port_start,
+};
+
static const struct piix_map_db ich5_map_db = {
.mask = 0x7,
.port_enable = 0x3,
.port_ops = &piix_sata_ops,
},
+ [piix_pata_vmw] =
+ {
+ .sht = &piix_sht,
+ .flags = PIIX_PATA_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
+ .udma_mask = ATA_UDMA_MASK_40C,
+ .port_ops = &piix_vmw_ops,
+ },
+
};
static struct pci_bits piix_enable_bits[] = {
}
#endif
+static u8 piix_vmw_bmdma_status(struct ata_port *ap)
+{
+ return ata_bmdma_status(ap) & ~ATA_DMA_ERR;
+}
+
#define AHCI_PCI_BAR 5
#define AHCI_GLOBAL_CTL 0x04
#define AHCI_ENABLE (1 << 31)
blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
}
+ if (dev->class == ATA_DEV_ATA)
+ sdev->manage_start_stop = 1;
+
if (dev->flags & ATA_DFLAG_AN)
set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
ata_scsi_sdev_config(sdev);
- if (dev->class == ATA_DEV_ATA)
- sdev->manage_start_stop = 1;
-
if (dev)
ata_scsi_dev_config(sdev, dev);
[PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
"invalid data directon for ATAPI CDB" },
[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
- "SGT no on qword boundary" },
+ "SGT not on qword boundary" },
[PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
"PCI target abort while fetching SGT" },
[PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
if (ci && ci->desc) {
err_mask |= ci->err_mask;
action |= ci->action;
+ if (action & ATA_EH_RESET_MASK)
+ freeze = 1;
ata_ehi_push_desc(ehi, "%s", ci->desc);
} else {
err_mask |= AC_ERR_OTHER;
action |= ATA_EH_SOFTRESET;
+ freeze = 1;
ata_ehi_push_desc(ehi, "unknown command error %d",
cerr);
}
return;
}
-static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
+static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
{
ushort subsystem_vendor_id, subsystem_device_id, command;
__u32 board_id, scratchpad = 0;
spin_lock_irqsave(&ll->hcill_lock, flags);
switch (ll->hcill_state) {
+ case HCILL_ASLEEP_TO_AWAKE:
+ /*
+ * This state means that both the host and the BRF chip
+ * have simultaneously sent a wake-up-indication packet.
+ * Traditionaly, in this case, receiving a wake-up-indication
+ * was enough and an additional wake-up-ack wasn't needed.
+ * This has changed with the BRF6350, which does require an
+ * explicit wake-up-ack. Other BRF versions, which do not
+ * require an explicit ack here, do accept it, thus it is
+ * perfectly safe to always send one.
+ */
+ BT_DBG("dual wake-up-indication");
+ /* deliberate fall-through - do not add break */
case HCILL_ASLEEP:
/* acknowledge device wake up */
if (send_hcill_cmd(HCILL_WAKE_UP_ACK, hu) < 0) {
goto out;
}
break;
- case HCILL_ASLEEP_TO_AWAKE:
- /*
- * this state means that a wake-up-indication
- * is already on its way to the device,
- * and will serve as the required wake-up-ack
- */
- BT_DBG("dual wake-up-indication");
- break;
default:
- /* any other state are illegal */
+ /* any other state is illegal */
BT_ERR("received HCILL_WAKE_UP_IND in state %ld", ll->hcill_state);
break;
}
}
EXPORT_SYMBOL_GPL(tpm_remove_hardware);
-static u8 savestate[] = {
- 0, 193, /* TPM_TAG_RQU_COMMAND */
- 0, 0, 0, 10, /* blob length (in bytes) */
- 0, 0, 0, 152 /* TPM_ORD_SaveState */
-};
-
/*
* We are about to suspend. Save the TPM state
* so that it can be restored.
int tpm_pm_suspend(struct device *dev, pm_message_t pm_state)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
+ u8 savestate[] = {
+ 0, 193, /* TPM_TAG_RQU_COMMAND */
+ 0, 0, 0, 10, /* blob length (in bytes) */
+ 0, 0, 0, 152 /* TPM_ORD_SaveState */
+ };
+
if (chip == NULL)
return -ENODEV;
* Generic i2c master transfer entrypoint.
*
* Note: We do not use Atmel's feature of storing the "internal device address".
- * Instead the "internal device address" has to be written using a seperate
+ * Instead the "internal device address" has to be written using a separate
* i2c message.
* http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html
*/
err_free_irq:
free_irq(dev->irq, dev);
err_unuse_clocks:
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_disable_clocks(dev);
omap_i2c_put_clocks(dev);
err_free_mem:
platform_set_drvdata(pdev, NULL);
kfree(dev);
err_release_region:
- omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
release_mem_region(mem->start, (mem->end - mem->start) + 1);
return r;
break;
/* Note that these are broken vs. the expected smbus API where
- * on reads, the lenght is actually returned from the function,
+ * on reads, the length is actually returned from the function,
* but I think the current API makes no sense and I don't want
* any driver that I haven't verified for correctness to go
* anywhere near a pmac i2c bus anyway ...
static int __init i2c_sibyte_init(void)
{
- printk("i2c-swarm.o: i2c SMBus adapter module for SiByte board\n");
+ pr_info("i2c-sibyte: i2c SMBus adapter module for SiByte board\n");
if (i2c_sibyte_add_bus(&sibyte_board_adapter[0], K_SMB_FREQ_100KHZ) < 0)
return -ENODEV;
- if (i2c_sibyte_add_bus(&sibyte_board_adapter[1], K_SMB_FREQ_400KHZ) < 0)
+ if (i2c_sibyte_add_bus(&sibyte_board_adapter[1],
+ K_SMB_FREQ_400KHZ) < 0) {
+ i2c_del_adapter(&sibyte_board_adapter[0]);
return -ENODEV;
+ }
return 0;
}
/* This address checking function differs from the one in i2c-core
in that it considers an address with a registered device, but no
- bounded driver, as NOT busy. */
+ bound driver, as NOT busy. */
static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr)
{
struct list_head *item;
EXPORT_SYMBOL(gameport_open);
EXPORT_SYMBOL(gameport_close);
EXPORT_SYMBOL(gameport_rescan);
-EXPORT_SYMBOL(gameport_cooked_read);
-EXPORT_SYMBOL(gameport_set_name);
EXPORT_SYMBOL(gameport_set_phys);
EXPORT_SYMBOL(gameport_start_polling);
EXPORT_SYMBOL(gameport_stop_polling);
if (value >= 0)
disposition = INPUT_PASS_TO_ALL;
break;
+
+ case EV_PWR:
+ disposition = INPUT_PASS_TO_ALL;
+ break;
}
if (type != EV_SYN)
__set_bit(code, dev->ffbit);
break;
+ case EV_PWR:
+ /* do nothing */
+ break;
+
default:
printk(KERN_ERR
"input_set_capability: unknown type %u (code %u)\n",
to your machine, so normally you should say Y here.
config KEYBOARD_HP6XX
- tristate "HP Jornada 6XX Keyboard support"
+ tristate "HP Jornada 6xx keyboard"
depends on SH_HP6XX
select INPUT_POLLDEV
help
- This adds support for the onboard keyboard found on
- HP Jornada 620/660/680/690.
+ Say Y here if you have a HP Jornada 620/660/680/690 and want to
+ support the built-in keyboard.
To compile this driver as a module, choose M here: the
module will be called jornada680_kbd.
config KEYBOARD_HP7XX
- tristate "HP Jornada 7XX Keyboard Driver"
+ tristate "HP Jornada 7xx keyboard"
depends on SA1100_JORNADA720_SSP && SA1100_SSP
help
- Say Y here to add support for the HP Jornada 7xx (710/720/728)
- onboard keyboard.
+ Say Y here if you have a HP Jornada 710/720/728 and want to
+ support the built-in keyboard.
To compile this driver as a module, choose M here: the
module will be called jornada720_kbd.
* published by the Free Software Foundation.
*/
-#include <linux/input.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
+#include <linux/input.h>
#include <linux/input-polldev.h>
+#include <linux/interrupt.h>
#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/interrupt.h>
#include <asm/delay.h>
#include <asm/io.h>
#define PLDR 0xa4000134
static const unsigned short jornada_scancodes[] = {
-/* PTD1 */ KEY_CAPSLOCK, KEY_MACRO, KEY_LEFTCTRL, 0, KEY_ESC, 0, 0, 0, /* 1 -> 8 */
- KEY_F1, KEY_F2, KEY_F3, KEY_F8, KEY_F7, KEY_F2, KEY_F4, KEY_F5, /* 9 -> 16 */
-/* PTD5 */ KEY_SLASH, KEY_APOSTROPHE, KEY_ENTER, 0, KEY_Z, 0, 0, 0, /* 17 -> 24 */
- KEY_X, KEY_C, KEY_V, KEY_DOT, KEY_COMMA, KEY_M, KEY_B, KEY_N, /* 25 -> 32 */
-/* PTD7 */ KEY_KP2, KEY_KP6, 0, 0, 0, 0, 0, 0, /* 33 -> 40 */
- 0, 0, 0, KEY_KP4, 0, 0, KEY_LEFTALT, KEY_HANJA, /* 41 -> 48 */
-/* PTE0 */ 0, 0, 0, 0, KEY_FINANCE, 0, 0, 0, /* 49 -> 56 */
- KEY_LEFTCTRL, 0, KEY_SPACE, KEY_KPDOT, KEY_VOLUMEUP, 249, 0, 0, /* 57 -> 64 */
-/* PTE1 */ KEY_SEMICOLON, KEY_RIGHTBRACE, KEY_BACKSLASH, 0, KEY_A, 0, 0, 0,/* 65 -> 72 */
- KEY_S, KEY_D, KEY_F, KEY_L, KEY_K, KEY_J, KEY_G, KEY_H, /* 73 -> 80 */
-/* PTE3 */ KEY_KP8, KEY_LEFTMETA, KEY_RIGHTSHIFT, 0, KEY_TAB, 0, 0,0, /* 81 -> 88 */
- 0, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, /* 89 -> 96 */
-/* PTE6 */ KEY_P, KEY_LEFTBRACE, KEY_BACKSPACE, 0, KEY_Q, 0, 0, 0, /* 97 -> 104 */
- KEY_W, KEY_E, KEY_R, KEY_O, KEY_I, KEY_U, KEY_T, KEY_R, /* 105 -> 112 */
-/* PTE7 */ KEY_0, KEY_MINUS, KEY_EQUAL, 0, KEY_1, 0, 0, 0, /* 113 -> 120 */
- KEY_2, KEY_3, KEY_4, KEY_9, KEY_8, KEY_7, KEY_5, KEY_6, /* 121 -> 128 */
+/* PTD1 */ KEY_CAPSLOCK, KEY_MACRO, KEY_LEFTCTRL, 0, KEY_ESC, KEY_KP5, 0, 0, /* 1 -> 8 */
+ KEY_F1, KEY_F2, KEY_F3, KEY_F8, KEY_F7, KEY_F6, KEY_F4, KEY_F5, /* 9 -> 16 */
+/* PTD5 */ KEY_SLASH, KEY_APOSTROPHE, KEY_ENTER, 0, KEY_Z, 0, 0, 0, /* 17 -> 24 */
+ KEY_X, KEY_C, KEY_V, KEY_DOT, KEY_COMMA, KEY_M, KEY_B, KEY_N, /* 25 -> 32 */
+/* PTD7 */ KEY_KP2, KEY_KP6, KEY_KP3, 0, 0, 0, 0, 0, /* 33 -> 40 */
+ KEY_F10, KEY_RO, KEY_F9, KEY_KP4, KEY_NUMLOCK, KEY_SCROLLLOCK, KEY_LEFTALT, KEY_HANJA, /* 41 -> 48 */
+/* PTE0 */ KEY_KATAKANA, KEY_KP0, KEY_GRAVE, 0, KEY_FINANCE, 0, 0, 0, /* 49 -> 56 */
+ KEY_KPMINUS, KEY_HIRAGANA, KEY_SPACE, KEY_KPDOT, KEY_VOLUMEUP, 249, 0, 0, /* 57 -> 64 */
+/* PTE1 */ KEY_SEMICOLON, KEY_RIGHTBRACE, KEY_BACKSLASH, 0, KEY_A, 0, 0, 0, /* 65 -> 72 */
+ KEY_S, KEY_D, KEY_F, KEY_L, KEY_K, KEY_J, KEY_G, KEY_H, /* 73 -> 80 */
+/* PTE3 */ KEY_KP8, KEY_LEFTMETA, KEY_RIGHTSHIFT, 0, KEY_TAB, 0, 0, 0, /* 81 -> 88 */
+ 0, KEY_LEFTSHIFT, KEY_KP7, KEY_KP9, KEY_KP1, KEY_F11, KEY_KPPLUS, KEY_KPASTERISK, /* 89 -> 96 */
+/* PTE6 */ KEY_P, KEY_LEFTBRACE, KEY_BACKSPACE, 0, KEY_Q, 0, 0, 0, /* 97 -> 104 */
+ KEY_W, KEY_E, KEY_R, KEY_O, KEY_I, KEY_U, KEY_T, KEY_Y, /* 105 -> 112 */
+/* PTE7 */ KEY_0, KEY_MINUS, KEY_EQUAL, 0, KEY_1, 0, 0, 0, /* 113 -> 120 */
+ KEY_2, KEY_3, KEY_4, KEY_9, KEY_8, KEY_7, KEY_5, KEY_6, /* 121 -> 128 */
/* **** */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0
};
for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
set_bit(spitzkbd->keycode[i], input_dev->keybit);
clear_bit(0, input_dev->keybit);
+ set_bit(KEY_SUSPEND, input_dev->keybit);
set_bit(SW_LID, input_dev->swbit);
set_bit(SW_TABLET_MODE, input_dev->swbit);
set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
module will be called mk712.
config TOUCHSCREEN_HP600
- tristate "HP Jornada 680/690 touchscreen"
+ tristate "HP Jornada 6xx touchscreen"
depends on SH_HP6XX && SH_ADC
help
- Say Y here if you have a HP Jornada 680 or 690 and want to
+ Say Y here if you have a HP Jornada 620/660/680/690 and want to
support the built-in touchscreen.
- If unsure, say N.
-
To compile this driver as a module, choose M here: the
module will be called hp680_ts_input.
config TOUCHSCREEN_HP7XX
- tristate "HP Jornada 710/720/728 touchscreen"
+ tristate "HP Jornada 7xx touchscreen"
depends on SA1100_JORNADA720_SSP
help
Say Y here if you have a HP Jornada 710/720/728 and want
input_sync(ahid->input);
input_report_key(ahid->input, KEY_CAPSLOCK, 0);
input_sync(ahid->input);
+ return;
}
- return;
+ break;
#ifdef CONFIG_PPC_PMAC
case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */
switch(pmac_call_feature(PMAC_FTR_GET_MB_INFO,
#if defined(__ISAPNP__)
static int pnp_cards;
struct pnp_dev *idev = NULL;
+ int pnp_found = 0;
if (nopnp == 1)
goto no_pnp;
pnp_cards++;
netdev_boot_setup_check(dev);
+ pnp_found = 1;
goto found;
}
}
lp = netdev_priv(dev);
#if defined(__ISAPNP__)
lp->dev = &idev->dev;
+ if (pnp_found)
+ lp->type = EL3_PNP;
#endif
err = el3_common_init(dev);
If you don't have this card, of course say N.
-config IP1000
- tristate "IP1000 Gigabit Ethernet support"
- depends on PCI && EXPERIMENTAL
- select MII
- ---help---
- This driver supports IP1000 gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called ipg. This is recommended.
-
source "drivers/net/arcnet/Kconfig"
source "drivers/net/phy/Kconfig"
To compile this driver as a module, choose M here. The module
will be called e1000e.
+config IP1000
+ tristate "IP1000 Gigabit Ethernet support"
+ depends on PCI && EXPERIMENTAL
+ select MII
+ ---help---
+ This driver supports IP1000 gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called ipg. This is recommended.
+
source "drivers/net/ixp2000/Kconfig"
config MYRI_SBUS
static int fs_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (!fep->phydev)
+ return -ENODEV;
+
return phy_ethtool_gset(fep->phydev, cmd);
}
static int fs_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct fs_enet_private *fep = netdev_priv(dev);
- phy_ethtool_sset(fep->phydev, cmd);
- return 0;
+
+ if (!fep->phydev)
+ return -ENODEV;
+
+ return phy_ethtool_sset(fep->phydev, cmd);
}
static int fs_nway_reset(struct net_device *dev)
| NETIF_F_NO_CSUM
| NETIF_F_HIGHDMA
| NETIF_F_LLTX
- | NETIF_F_NETNS_LOCAL,
+ | NETIF_F_NETNS_LOCAL;
dev->ethtool_ops = &loopback_ethtool_ops;
dev->header_ops = ð_header_ops;
dev->init = loopback_dev_init;
if (lowerdev == NULL)
return -ENODEV;
+ /* Don't allow macvlans on top of other macvlans - its not really
+ * wrong, but lockdep can't handle it and its not useful for anything
+ * you couldn't do directly on top of the real device.
+ */
+ if (lowerdev->rtnl_link_ops == dev->rtnl_link_ops)
+ return -ENODEV;
+
if (!tb[IFLA_MTU])
dev->mtu = lowerdev->mtu;
else if (dev->mtu > lowerdev->mtu)
#define _NETXEN_NIC_LINUX_MAJOR 3
#define _NETXEN_NIC_LINUX_MINOR 4
-#define _NETXEN_NIC_LINUX_SUBVERSION 2
-#define NETXEN_NIC_LINUX_VERSIONID "3.4.2"
+#define _NETXEN_NIC_LINUX_SUBVERSION 18
+#define NETXEN_NIC_LINUX_VERSIONID "3.4.18"
#define NETXEN_NUM_FLASH_SECTORS (64)
#define NETXEN_FLASH_SECTOR_SIZE (64 * 1024)
((cmd_desc)->port_ctxid |= ((var) & 0xF0))
#define netxen_set_cmd_desc_flags(cmd_desc, val) \
- ((cmd_desc)->flags_opcode &= ~cpu_to_le16(0x7f), \
- (cmd_desc)->flags_opcode |= cpu_to_le16((val) & 0x7f))
+ (cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
+ ~cpu_to_le16(0x7f)) | cpu_to_le16((val) & 0x7f)
#define netxen_set_cmd_desc_opcode(cmd_desc, val) \
- ((cmd_desc)->flags_opcode &= ~cpu_to_le16(0x3f<<7), \
- (cmd_desc)->flags_opcode |= cpu_to_le16(((val & 0x3f)<<7)))
+ (cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
+ ~cpu_to_le16((u16)0x3f << 7)) | cpu_to_le16(((val) & 0x3f) << 7)
#define netxen_set_cmd_desc_num_of_buff(cmd_desc, val) \
- ((cmd_desc)->num_of_buffers_total_length &= ~cpu_to_le32(0xff), \
- (cmd_desc)->num_of_buffers_total_length |= cpu_to_le32((val) & 0xff))
+ (cmd_desc)->num_of_buffers_total_length = \
+ ((cmd_desc)->num_of_buffers_total_length & \
+ ~cpu_to_le32(0xff)) | cpu_to_le32((val) & 0xff)
#define netxen_set_cmd_desc_totallength(cmd_desc, val) \
- ((cmd_desc)->num_of_buffers_total_length &= ~cpu_to_le32(0xffffff00), \
- (cmd_desc)->num_of_buffers_total_length |= cpu_to_le32(val << 8))
+ (cmd_desc)->num_of_buffers_total_length = \
+ ((cmd_desc)->num_of_buffers_total_length & \
+ ~cpu_to_le32((u32)0xffffff << 8)) | \
+ cpu_to_le32(((val) & 0xffffff) << 8)
#define netxen_get_cmd_desc_opcode(cmd_desc) \
- ((le16_to_cpu((cmd_desc)->flags_opcode) >> 7) & 0x003F)
+ ((le16_to_cpu((cmd_desc)->flags_opcode) >> 7) & 0x003f)
#define netxen_get_cmd_desc_totallength(cmd_desc) \
- (le32_to_cpu((cmd_desc)->num_of_buffers_total_length) >> 8)
+ ((le32_to_cpu((cmd_desc)->num_of_buffers_total_length) >> 8) & 0xffffff)
struct cmd_desc_type0 {
u8 tcp_hdr_offset; /* For LSO only */
#define netxen_get_sts_desc_lro_last_frag(status_desc) \
(((status_desc)->lro & 0x80) >> 7)
-#define netxen_get_sts_port(status_desc) \
- (le64_to_cpu((status_desc)->status_desc_data) & 0x0F)
-#define netxen_get_sts_status(status_desc) \
- ((le64_to_cpu((status_desc)->status_desc_data) >> 4) & 0x0F)
-#define netxen_get_sts_type(status_desc) \
- ((le64_to_cpu((status_desc)->status_desc_data) >> 8) & 0x0F)
-#define netxen_get_sts_totallength(status_desc) \
- ((le64_to_cpu((status_desc)->status_desc_data) >> 12) & 0xFFFF)
-#define netxen_get_sts_refhandle(status_desc) \
- ((le64_to_cpu((status_desc)->status_desc_data) >> 28) & 0xFFFF)
-#define netxen_get_sts_prot(status_desc) \
- ((le64_to_cpu((status_desc)->status_desc_data) >> 44) & 0x0F)
+#define netxen_get_sts_port(sts_data) \
+ ((sts_data) & 0x0F)
+#define netxen_get_sts_status(sts_data) \
+ (((sts_data) >> 4) & 0x0F)
+#define netxen_get_sts_type(sts_data) \
+ (((sts_data) >> 8) & 0x0F)
+#define netxen_get_sts_totallength(sts_data) \
+ (((sts_data) >> 12) & 0xFFFF)
+#define netxen_get_sts_refhandle(sts_data) \
+ (((sts_data) >> 28) & 0xFFFF)
+#define netxen_get_sts_prot(sts_data) \
+ (((sts_data) >> 44) & 0x0F)
+#define netxen_get_sts_opcode(sts_data) \
+ (((sts_data) >> 58) & 0x03F)
+
#define netxen_get_sts_owner(status_desc) \
((le64_to_cpu((status_desc)->status_desc_data) >> 56) & 0x03)
-#define netxen_get_sts_opcode(status_desc) \
- ((le64_to_cpu((status_desc)->status_desc_data) >> 58) & 0x03F)
-
-#define netxen_clear_sts_owner(status_desc) \
- ((status_desc)->status_desc_data &= \
- ~cpu_to_le64(((unsigned long long)3) << 56 ))
-#define netxen_set_sts_owner(status_desc, val) \
- ((status_desc)->status_desc_data |= \
- cpu_to_le64(((unsigned long long)((val) & 0x3)) << 56 ))
+#define netxen_set_sts_owner(status_desc, val) { \
+ (status_desc)->status_desc_data = \
+ ((status_desc)->status_desc_data & \
+ ~cpu_to_le64(0x3ULL << 56)) | \
+ cpu_to_le64((u64)((val) & 0x3) << 56); \
+}
struct status_desc {
/* Bit pattern: 0-3 port, 4-7 status, 8-11 type, 12-27 total_length
{
struct pci_dev *pdev = adapter->pdev;
struct net_device *netdev = adapter->netdev;
- int index = netxen_get_sts_refhandle(desc);
+ u64 sts_data = le64_to_cpu(desc->status_desc_data);
+ int index = netxen_get_sts_refhandle(sts_data);
struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctxid]);
struct netxen_rx_buffer *buffer;
struct sk_buff *skb;
- u32 length = netxen_get_sts_totallength(desc);
+ u32 length = netxen_get_sts_totallength(sts_data);
u32 desc_ctx;
struct netxen_rcv_desc_ctx *rcv_desc;
int ret;
- desc_ctx = netxen_get_sts_type(desc);
+ desc_ctx = netxen_get_sts_type(sts_data);
if (unlikely(desc_ctx >= NUM_RCV_DESC_RINGS)) {
printk("%s: %s Bad Rcv descriptor ring\n",
netxen_nic_driver_name, netdev->name);
skb = (struct sk_buff *)buffer->skb;
if (likely(adapter->rx_csum &&
- netxen_get_sts_status(desc) == STATUS_CKSUM_OK)) {
+ netxen_get_sts_status(sts_data) == STATUS_CKSUM_OK)) {
adapter->stats.csummed++;
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else
break;
}
netxen_process_rcv(adapter, ctxid, desc);
- netxen_clear_sts_owner(desc);
netxen_set_sts_owner(desc, STATUS_OWNER_PHANTOM);
consumer = (consumer + 1) & (adapter->max_rx_desc_count - 1);
count++;
struct pci_dev *pdev;
struct netxen_skb_frag *frag;
u32 i;
- struct sk_buff *skb = NULL;
int done;
spin_lock(&adapter->tx_lock);
while ((last_consumer != consumer) && (count1 < MAX_STATUS_HANDLE)) {
buffer = &adapter->cmd_buf_arr[last_consumer];
pdev = adapter->pdev;
- frag = &buffer->frag_array[0];
- skb = buffer->skb;
- if (skb && (cmpxchg(&buffer->skb, skb, 0) == skb)) {
+ if (buffer->skb) {
+ frag = &buffer->frag_array[0];
pci_unmap_single(pdev, frag->dma, frag->length,
PCI_DMA_TODEVICE);
frag->dma = 0ULL;
}
adapter->stats.skbfreed++;
- dev_kfree_skb_any(skb);
- skb = NULL;
+ dev_kfree_skb_any(buffer->skb);
+ buffer->skb = NULL;
} else if (adapter->proc_cmd_buf_counter == 1) {
adapter->stats.txnullskb++;
}
unregister_netdev(netdev);
- if (adapter->stop_port)
- adapter->stop_port(adapter);
-
- netxen_nic_disable_int(adapter);
-
if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
init_firmware_done++;
netxen_free_hw_resources(adapter);
netif_stop_queue(netdev);
napi_disable(&adapter->napi);
+ if (adapter->stop_port)
+ adapter->stop_port(adapter);
+
netxen_nic_disable_int(adapter);
cmd_buff = adapter->cmd_buf_arr;
return NETDEV_TX_OK;
}
- /*
- * Everything is set up. Now, we just need to transmit it out.
- * Note that we have to copy the contents of buffer over to
- * right place. Later on, this can be optimized out by de-coupling the
- * producer index from the buffer index.
- */
- retry_getting_window:
- spin_lock_bh(&adapter->tx_lock);
- if (adapter->total_threads >= MAX_XMIT_PRODUCERS) {
- spin_unlock_bh(&adapter->tx_lock);
- /*
- * Yield CPU
- */
- if (!in_atomic())
- schedule();
- else {
- for (i = 0; i < 20; i++)
- cpu_relax(); /*This a nop instr on i386 */
- }
- goto retry_getting_window;
- }
- local_producer = adapter->cmd_producer;
/* There 4 fragments per descriptor */
no_of_desc = (frag_count + 3) >> 2;
if (netdev->features & NETIF_F_TSO) {
}
}
}
+
+ spin_lock_bh(&adapter->tx_lock);
+ if (adapter->total_threads >= MAX_XMIT_PRODUCERS) {
+ goto out_requeue;
+ }
+ local_producer = adapter->cmd_producer;
k = adapter->cmd_producer;
max_tx_desc_count = adapter->max_tx_desc_count;
last_cmd_consumer = adapter->last_cmd_consumer;
if ((k + no_of_desc) >=
((last_cmd_consumer <= k) ? last_cmd_consumer + max_tx_desc_count :
last_cmd_consumer)) {
- netif_stop_queue(netdev);
- adapter->flags |= NETXEN_NETDEV_STATUS;
- spin_unlock_bh(&adapter->tx_lock);
- return NETDEV_TX_BUSY;
+ goto out_requeue;
}
k = get_index_range(k, max_tx_desc_count, no_of_desc);
adapter->cmd_producer = k;
adapter->max_tx_desc_count);
hwdesc = &hw->cmd_desc_head[producer];
memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
+ pbuf = &adapter->cmd_buf_arr[producer];
+ pbuf->skb = NULL;
}
frag = &skb_shinfo(skb)->frags[i - 1];
len = frag->size;
}
/* copy the MAC/IP/TCP headers to the cmd descriptor list */
hwdesc = &hw->cmd_desc_head[producer];
+ pbuf = &adapter->cmd_buf_arr[producer];
+ pbuf->skb = NULL;
/* copy the first 64 bytes */
memcpy(((void *)hwdesc) + 2,
if (more_hdr) {
hwdesc = &hw->cmd_desc_head[producer];
+ pbuf = &adapter->cmd_buf_arr[producer];
+ pbuf->skb = NULL;
/* copy the next 64 bytes - should be enough except
* for pathological case
*/
}
}
- i = netxen_get_cmd_desc_totallength(&hw->cmd_desc_head[saved_producer]);
-
- hw->cmd_desc_head[saved_producer].flags_opcode =
- cpu_to_le16(hw->cmd_desc_head[saved_producer].flags_opcode);
- hw->cmd_desc_head[saved_producer].num_of_buffers_total_length =
- cpu_to_le32(hw->cmd_desc_head[saved_producer].
- num_of_buffers_total_length);
-
spin_lock_bh(&adapter->tx_lock);
- adapter->stats.txbytes += i;
+ adapter->stats.txbytes += skb->len;
/* Code to update the adapter considering how many producer threads
are currently working */
}
adapter->stats.xmitfinished++;
- spin_unlock_bh(&adapter->tx_lock);
-
netdev->trans_start = jiffies;
- DPRINTK(INFO, "wrote CMD producer %x to phantom\n", producer);
-
- DPRINTK(INFO, "Done. Send\n");
+ spin_unlock_bh(&adapter->tx_lock);
return NETDEV_TX_OK;
+
+out_requeue:
+ netif_stop_queue(netdev);
+ adapter->flags |= NETXEN_NETDEV_STATUS;
+
+ spin_unlock_bh(&adapter->tx_lock);
+ return NETDEV_TX_BUSY;
}
static void netxen_watchdog(unsigned long v)
__u32 mac_cfg;
u32 port = physical_port[adapter->portnum];
- if (port != 0)
+ if (port > NETXEN_NIU_MAX_XG_PORTS)
return -EINVAL;
+
mac_cfg = 0;
- netxen_xg_soft_reset(mac_cfg);
- if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_CONFIG_0,
- &mac_cfg, 4))
+ if (netxen_nic_hw_write_wx(adapter,
+ NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), &mac_cfg, 4))
return -EIO;
return 0;
}
return 0;
}
-static int xcvr_init_10g(struct niu *np)
+static int mrvl88x2011_act_led(struct niu *np, int val)
+{
+ int err;
+
+ err = mdio_read(np, np->phy_addr, MRVL88X2011_USER_DEV2_ADDR,
+ MRVL88X2011_LED_8_TO_11_CTL);
+ if (err < 0)
+ return err;
+
+ err &= ~MRVL88X2011_LED(MRVL88X2011_LED_ACT,MRVL88X2011_LED_CTL_MASK);
+ err |= MRVL88X2011_LED(MRVL88X2011_LED_ACT,val);
+
+ return mdio_write(np, np->phy_addr, MRVL88X2011_USER_DEV2_ADDR,
+ MRVL88X2011_LED_8_TO_11_CTL, err);
+}
+
+static int mrvl88x2011_led_blink_rate(struct niu *np, int rate)
+{
+ int err;
+
+ err = mdio_read(np, np->phy_addr, MRVL88X2011_USER_DEV2_ADDR,
+ MRVL88X2011_LED_BLINK_CTL);
+ if (err >= 0) {
+ err &= ~MRVL88X2011_LED_BLKRATE_MASK;
+ err |= (rate << 4);
+
+ err = mdio_write(np, np->phy_addr, MRVL88X2011_USER_DEV2_ADDR,
+ MRVL88X2011_LED_BLINK_CTL, err);
+ }
+
+ return err;
+}
+
+static int xcvr_init_10g_mrvl88x2011(struct niu *np)
+{
+ int err;
+
+ /* Set LED functions */
+ err = mrvl88x2011_led_blink_rate(np, MRVL88X2011_LED_BLKRATE_134MS);
+ if (err)
+ return err;
+
+ /* led activity */
+ err = mrvl88x2011_act_led(np, MRVL88X2011_LED_CTL_OFF);
+ if (err)
+ return err;
+
+ err = mdio_read(np, np->phy_addr, MRVL88X2011_USER_DEV3_ADDR,
+ MRVL88X2011_GENERAL_CTL);
+ if (err < 0)
+ return err;
+
+ err |= MRVL88X2011_ENA_XFPREFCLK;
+
+ err = mdio_write(np, np->phy_addr, MRVL88X2011_USER_DEV3_ADDR,
+ MRVL88X2011_GENERAL_CTL, err);
+ if (err < 0)
+ return err;
+
+ err = mdio_read(np, np->phy_addr, MRVL88X2011_USER_DEV1_ADDR,
+ MRVL88X2011_PMA_PMD_CTL_1);
+ if (err < 0)
+ return err;
+
+ if (np->link_config.loopback_mode == LOOPBACK_MAC)
+ err |= MRVL88X2011_LOOPBACK;
+ else
+ err &= ~MRVL88X2011_LOOPBACK;
+
+ err = mdio_write(np, np->phy_addr, MRVL88X2011_USER_DEV1_ADDR,
+ MRVL88X2011_PMA_PMD_CTL_1, err);
+ if (err < 0)
+ return err;
+
+ /* Enable PMD */
+ return mdio_write(np, np->phy_addr, MRVL88X2011_USER_DEV1_ADDR,
+ MRVL88X2011_10G_PMD_TX_DIS, MRVL88X2011_ENA_PMDTX);
+}
+
+static int xcvr_init_10g_bcm8704(struct niu *np)
{
struct niu_link_config *lp = &np->link_config;
u16 analog_stat0, tx_alarm_status;
int err;
- u64 val;
-
- val = nr64_mac(XMAC_CONFIG);
- val &= ~XMAC_CONFIG_LED_POLARITY;
- val |= XMAC_CONFIG_FORCE_LED_ON;
- nw64_mac(XMAC_CONFIG, val);
-
- /* XXX shared resource, lock parent XXX */
- val = nr64(MIF_CONFIG);
- val |= MIF_CONFIG_INDIRECT_MODE;
- nw64(MIF_CONFIG, val);
err = bcm8704_reset(np);
if (err)
return 0;
}
+static int xcvr_init_10g(struct niu *np)
+{
+ int phy_id, err;
+ u64 val;
+
+ val = nr64_mac(XMAC_CONFIG);
+ val &= ~XMAC_CONFIG_LED_POLARITY;
+ val |= XMAC_CONFIG_FORCE_LED_ON;
+ nw64_mac(XMAC_CONFIG, val);
+
+ /* XXX shared resource, lock parent XXX */
+ val = nr64(MIF_CONFIG);
+ val |= MIF_CONFIG_INDIRECT_MODE;
+ nw64(MIF_CONFIG, val);
+
+ phy_id = phy_decode(np->parent->port_phy, np->port);
+ phy_id = np->parent->phy_probe_info.phy_id[phy_id][np->port];
+
+ /* handle different phy types */
+ switch (phy_id & NIU_PHY_ID_MASK) {
+ case NIU_PHY_ID_MRVL88X2011:
+ err = xcvr_init_10g_mrvl88x2011(np);
+ break;
+
+ default: /* bcom 8704 */
+ err = xcvr_init_10g_bcm8704(np);
+ break;
+ }
+
+ return 0;
+}
+
static int mii_reset(struct niu *np)
{
int limit, err;
return 0;
}
-static int link_status_10g(struct niu *np, int *link_up_p)
+static int link_status_10g_mrvl(struct niu *np, int *link_up_p)
{
- unsigned long flags;
- int err, link_up;
+ int err, link_up, pma_status, pcs_status;
link_up = 0;
- spin_lock_irqsave(&np->lock, flags);
+ err = mdio_read(np, np->phy_addr, MRVL88X2011_USER_DEV1_ADDR,
+ MRVL88X2011_10G_PMD_STATUS_2);
+ if (err < 0)
+ goto out;
- err = -EINVAL;
- if (np->link_config.loopback_mode != LOOPBACK_DISABLED)
+ /* Check PMA/PMD Register: 1.0001.2 == 1 */
+ err = mdio_read(np, np->phy_addr, MRVL88X2011_USER_DEV1_ADDR,
+ MRVL88X2011_PMA_PMD_STATUS_1);
+ if (err < 0)
+ goto out;
+
+ pma_status = ((err & MRVL88X2011_LNK_STATUS_OK) ? 1 : 0);
+
+ /* Check PMC Register : 3.0001.2 == 1: read twice */
+ err = mdio_read(np, np->phy_addr, MRVL88X2011_USER_DEV3_ADDR,
+ MRVL88X2011_PMA_PMD_STATUS_1);
+ if (err < 0)
+ goto out;
+
+ err = mdio_read(np, np->phy_addr, MRVL88X2011_USER_DEV3_ADDR,
+ MRVL88X2011_PMA_PMD_STATUS_1);
+ if (err < 0)
+ goto out;
+
+ pcs_status = ((err & MRVL88X2011_LNK_STATUS_OK) ? 1 : 0);
+
+ /* Check XGXS Register : 4.0018.[0-3,12] */
+ err = mdio_read(np, np->phy_addr, MRVL88X2011_USER_DEV4_ADDR,
+ MRVL88X2011_10G_XGXS_LANE_STAT);
+ if (err < 0)
goto out;
+ if (err == (PHYXS_XGXS_LANE_STAT_ALINGED | PHYXS_XGXS_LANE_STAT_LANE3 |
+ PHYXS_XGXS_LANE_STAT_LANE2 | PHYXS_XGXS_LANE_STAT_LANE1 |
+ PHYXS_XGXS_LANE_STAT_LANE0 | PHYXS_XGXS_LANE_STAT_MAGIC |
+ 0x800))
+ link_up = (pma_status && pcs_status) ? 1 : 0;
+
+ np->link_config.active_speed = SPEED_10000;
+ np->link_config.active_duplex = DUPLEX_FULL;
+ err = 0;
+out:
+ mrvl88x2011_act_led(np, (link_up ?
+ MRVL88X2011_LED_CTL_PCS_ACT :
+ MRVL88X2011_LED_CTL_OFF));
+
+ *link_up_p = link_up;
+ return err;
+}
+
+static int link_status_10g_bcom(struct niu *np, int *link_up_p)
+{
+ int err, link_up;
+
+ link_up = 0;
+
err = mdio_read(np, np->phy_addr, BCM8704_PMA_PMD_DEV_ADDR,
BCM8704_PMD_RCV_SIGDET);
if (err < 0)
err = 0;
out:
+ *link_up_p = link_up;
+ return err;
+}
+
+static int link_status_10g(struct niu *np, int *link_up_p)
+{
+ unsigned long flags;
+ int err = -EINVAL;
+
+ spin_lock_irqsave(&np->lock, flags);
+
+ if (np->link_config.loopback_mode == LOOPBACK_DISABLED) {
+ int phy_id;
+
+ phy_id = phy_decode(np->parent->port_phy, np->port);
+ phy_id = np->parent->phy_probe_info.phy_id[phy_id][np->port];
+
+ /* handle different phy types */
+ switch (phy_id & NIU_PHY_ID_MASK) {
+ case NIU_PHY_ID_MRVL88X2011:
+ err = link_status_10g_mrvl(np, link_up_p);
+ break;
+
+ default: /* bcom 8704 */
+ err = link_status_10g_bcom(np, link_up_p);
+ break;
+ }
+ }
+
spin_unlock_irqrestore(&np->lock, flags);
- *link_up_p = link_up;
return err;
}
if (dev_id_1 < 0 || dev_id_2 < 0)
return 0;
if (type == PHY_TYPE_PMA_PMD || type == PHY_TYPE_PCS) {
- if ((id & NIU_PHY_ID_MASK) != NIU_PHY_ID_BCM8704)
+ if (((id & NIU_PHY_ID_MASK) != NIU_PHY_ID_BCM8704) &&
+ ((id & NIU_PHY_ID_MASK) != NIU_PHY_ID_MRVL88X2011))
return 0;
} else {
if ((id & NIU_PHY_ID_MASK) != NIU_PHY_ID_BCM5464R)
#define NIU_PHY_ID_MASK 0xfffff0f0
#define NIU_PHY_ID_BCM8704 0x00206030
#define NIU_PHY_ID_BCM5464R 0x002060b0
+#define NIU_PHY_ID_MRVL88X2011 0x01410020
+
+/* MRVL88X2011 register addresses */
+#define MRVL88X2011_USER_DEV1_ADDR 1
+#define MRVL88X2011_USER_DEV2_ADDR 2
+#define MRVL88X2011_USER_DEV3_ADDR 3
+#define MRVL88X2011_USER_DEV4_ADDR 4
+#define MRVL88X2011_PMA_PMD_CTL_1 0x0000
+#define MRVL88X2011_PMA_PMD_STATUS_1 0x0001
+#define MRVL88X2011_10G_PMD_STATUS_2 0x0008
+#define MRVL88X2011_10G_PMD_TX_DIS 0x0009
+#define MRVL88X2011_10G_XGXS_LANE_STAT 0x0018
+#define MRVL88X2011_GENERAL_CTL 0x8300
+#define MRVL88X2011_LED_BLINK_CTL 0x8303
+#define MRVL88X2011_LED_8_TO_11_CTL 0x8306
+
+/* MRVL88X2011 register control */
+#define MRVL88X2011_ENA_XFPREFCLK 0x0001
+#define MRVL88X2011_ENA_PMDTX 0x0000
+#define MRVL88X2011_LOOPBACK 0x1
+#define MRVL88X2011_LED_ACT 0x1
+#define MRVL88X2011_LNK_STATUS_OK 0x4
+#define MRVL88X2011_LED_BLKRATE_MASK 0x70
+#define MRVL88X2011_LED_BLKRATE_034MS 0x0
+#define MRVL88X2011_LED_BLKRATE_067MS 0x1
+#define MRVL88X2011_LED_BLKRATE_134MS 0x2
+#define MRVL88X2011_LED_BLKRATE_269MS 0x3
+#define MRVL88X2011_LED_BLKRATE_538MS 0x4
+#define MRVL88X2011_LED_CTL_OFF 0x0
+#define MRVL88X2011_LED_CTL_PCS_ACT 0x5
+#define MRVL88X2011_LED_CTL_MASK 0x7
+#define MRVL88X2011_LED(n,v) ((v)<<((n)*4))
+#define MRVL88X2011_LED_STAT(n,v) ((v)>>((n)*4))
#define BCM8704_PMA_PMD_DEV_ADDR 1
#define BCM8704_PCS_DEV_ADDR 2
u32 clk;
clk = RTL_R8(Config2) & PCI_Clock_66MHz;
- for (i = 0; i < ARRAY_SIZE(cfg2_info); i++) {
+ for (i = 0; i < ARRAY_SIZE(cfg2_info); i++, p++) {
if ((p->mac_version == mac_version) && (p->clk == clk)) {
RTL_W32(0x7c, p->val);
break;
le = get_tx_le(sky2);
le->addr = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->tx_addr64 = 0;
}
static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
dma_addr_t map, unsigned len)
{
struct sky2_rx_le *le;
- u32 hi = upper_32_bits(map);
- if (sky2->rx_addr64 != hi) {
+ if (sizeof(dma_addr_t) > sizeof(u32)) {
le = sky2_next_rx(sky2);
- le->addr = cpu_to_le32(hi);
+ le->addr = cpu_to_le32(upper_32_bits(map));
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->rx_addr64 = upper_32_bits(map + len);
}
le = sky2_next_rx(sky2);
struct tx_ring_info *re;
unsigned i, len;
dma_addr_t mapping;
- u32 addr64;
u16 mss;
u8 ctrl;
len = skb_headlen(skb);
mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
- addr64 = upper_32_bits(mapping);
- /* Send high bits if changed or crosses boundary */
- if (addr64 != sky2->tx_addr64 ||
- upper_32_bits(mapping + len) != sky2->tx_addr64) {
+ /* Send high bits if needed */
+ if (sizeof(dma_addr_t) > sizeof(u32)) {
le = get_tx_le(sky2);
- le->addr = cpu_to_le32(addr64);
+ le->addr = cpu_to_le32(upper_32_bits(mapping));
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->tx_addr64 = upper_32_bits(mapping + len);
}
/* Check for TCP Segmentation Offload */
mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
- addr64 = upper_32_bits(mapping);
- if (addr64 != sky2->tx_addr64) {
+
+ if (sizeof(dma_addr_t) > sizeof(u32)) {
le = get_tx_le(sky2);
- le->addr = cpu_to_le32(addr64);
+ le->addr = cpu_to_le32(upper_32_bits(mapping));
le->ctrl = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->tx_addr64 = addr64;
}
le = get_tx_le(sky2);
/* Initialize network device */
static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
unsigned port,
- int highmem, int wol)
+ int highmem)
{
struct sky2_port *sky2;
struct net_device *dev = alloc_etherdev(sizeof(*sky2));
sky2->speed = -1;
sky2->advertising = sky2_supported_modes(hw);
sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
- sky2->wol = wol;
+ sky2->wol = sky2_wol_supported(hw) & WAKE_MAGIC;
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
return err;
}
-static int __devinit pci_wake_enabled(struct pci_dev *dev)
-{
- int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- u16 value;
-
- if (!pm)
- return 0;
- if (pci_read_config_word(dev, pm + PCI_PM_CTRL, &value))
- return 0;
- return value & PCI_PM_CTRL_PME_ENABLE;
-}
-
static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct net_device *dev;
struct sky2_hw *hw;
- int err, using_dac = 0, wol_default;
+ int err, using_dac = 0;
err = pci_enable_device(pdev);
if (err) {
}
}
- wol_default = pci_wake_enabled(pdev) ? WAKE_MAGIC : 0;
-
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
sky2_reset(hw);
- dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
+ dev = sky2_init_netdev(hw, 0, using_dac);
if (!dev) {
err = -ENOMEM;
goto err_out_free_pci;
if (hw->ports > 1) {
struct net_device *dev1;
- dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
+ dev1 = sky2_init_netdev(hw, 1, using_dac);
if (!dev1)
dev_warn(&pdev->dev, "allocation for second device failed\n");
else if ((err = register_netdev(dev1))) {
u16 tx_cons; /* next le to check */
u16 tx_prod; /* next le to use */
u16 tx_next; /* debug only */
- u32 tx_addr64;
+
u16 tx_pending;
u16 tx_last_mss;
u32 tx_tcpsum;
struct rx_ring_info *rx_ring ____cacheline_aligned_in_smp;
struct sky2_rx_le *rx_le;
- u32 rx_addr64;
+
u16 rx_next; /* next re to check */
u16 rx_put; /* next le index to use */
u16 rx_pending;
static int de4x5_sw_reset(struct net_device *dev);
static int de4x5_rx(struct net_device *dev);
static int de4x5_tx(struct net_device *dev);
-static int de4x5_ast(struct net_device *dev);
+static void de4x5_ast(struct net_device *dev);
static int de4x5_txur(struct net_device *dev);
static int de4x5_rx_ovfc(struct net_device *dev);
static int an_exception(struct de4x5_private *lp);
static char *build_setup_frame(struct net_device *dev, int mode);
static void disable_ast(struct net_device *dev);
-static void enable_ast(struct net_device *dev, u32 time_out);
static long de4x5_switch_mac_port(struct net_device *dev);
static int gep_rd(struct net_device *dev);
static void gep_wr(s32 data, struct net_device *dev);
-static void timeout(struct net_device *dev, void (*fn)(u_long data), u_long data, u_long msec);
static void yawn(struct net_device *dev, int state);
static void de4x5_parse_params(struct net_device *dev);
static void de4x5_dbg_open(struct net_device *dev);
lp->gendev = gendev;
spin_lock_init(&lp->lock);
init_timer(&lp->timer);
+ lp->timer.function = (void (*)(unsigned long))de4x5_ast;
+ lp->timer.data = (unsigned long)dev;
de4x5_parse_params(dev);
/*
lp->state = OPEN;
de4x5_dbg_open(dev);
- if (request_irq(dev->irq, (void *)de4x5_interrupt, IRQF_SHARED,
+ if (request_irq(dev->irq, de4x5_interrupt, IRQF_SHARED,
lp->adapter_name, dev)) {
printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq);
if (request_irq(dev->irq, de4x5_interrupt, IRQF_DISABLED | IRQF_SHARED,
return 0;
}
-static int
+static void
de4x5_ast(struct net_device *dev)
{
- struct de4x5_private *lp = netdev_priv(dev);
- int next_tick = DE4X5_AUTOSENSE_MS;
+ struct de4x5_private *lp = netdev_priv(dev);
+ int next_tick = DE4X5_AUTOSENSE_MS;
+ int dt;
- disable_ast(dev);
+ if (lp->useSROM)
+ next_tick = srom_autoconf(dev);
+ else if (lp->chipset == DC21140)
+ next_tick = dc21140m_autoconf(dev);
+ else if (lp->chipset == DC21041)
+ next_tick = dc21041_autoconf(dev);
+ else if (lp->chipset == DC21040)
+ next_tick = dc21040_autoconf(dev);
+ lp->linkOK = 0;
- if (lp->useSROM) {
- next_tick = srom_autoconf(dev);
- } else if (lp->chipset == DC21140) {
- next_tick = dc21140m_autoconf(dev);
- } else if (lp->chipset == DC21041) {
- next_tick = dc21041_autoconf(dev);
- } else if (lp->chipset == DC21040) {
- next_tick = dc21040_autoconf(dev);
- }
- lp->linkOK = 0;
- enable_ast(dev, next_tick);
+ dt = (next_tick * HZ) / 1000;
- return 0;
+ if (!dt)
+ dt = 1;
+
+ mod_timer(&lp->timer, jiffies + dt);
}
static int
for (j=0, i=0; i<ETH_ALEN; i++) {
j += (u_char) *((u_char *)&lp->srom + SROM_HWADD + i);
}
- if ((j != 0) && (j != 0x5fa)) {
+ if (j != 0 && j != 6 * 0xff) {
last.chipset = device;
last.bus = pb;
last.irq = irq;
static int
autoconf_media(struct net_device *dev)
{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int next_tick = DE4X5_AUTOSENSE_MS;
+ struct de4x5_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
- lp->linkOK = 0;
- lp->c_media = AUTO; /* Bogus last media */
- disable_ast(dev);
- inl(DE4X5_MFC); /* Zero the lost frames counter */
- lp->media = INIT;
- lp->tcount = 0;
+ disable_ast(dev);
- if (lp->useSROM) {
- next_tick = srom_autoconf(dev);
- } else if (lp->chipset == DC21040) {
- next_tick = dc21040_autoconf(dev);
- } else if (lp->chipset == DC21041) {
- next_tick = dc21041_autoconf(dev);
- } else if (lp->chipset == DC21140) {
- next_tick = dc21140m_autoconf(dev);
- }
+ lp->c_media = AUTO; /* Bogus last media */
+ inl(DE4X5_MFC); /* Zero the lost frames counter */
+ lp->media = INIT;
+ lp->tcount = 0;
- enable_ast(dev, next_tick);
+ de4x5_ast(dev);
- return (lp->media);
+ return lp->media;
}
/*
outl(0, aprom_addr); /* Reset Ethernet Address ROM Pointer */
}
} else { /* Read new srom */
- u_short tmp, *p = (short *)((char *)&lp->srom + SROM_HWADD);
+ u_short tmp;
+ __le16 *p = (__le16 *)((char *)&lp->srom + SROM_HWADD);
for (i=0; i<(ETH_ALEN>>1); i++) {
tmp = srom_rd(aprom_addr, (SROM_HWADD>>1) + i);
- *p = le16_to_cpu(tmp);
- j += *p++;
+ j += tmp; /* for check for 0:0:0:0:0:0 or ff:ff:ff:ff:ff:ff */
+ *p = cpu_to_le16(tmp);
}
- if ((j == 0) || (j == 0x2fffd)) {
- return;
+ if (j == 0 || j == 3 * 0xffff) {
+ /* could get 0 only from all-0 and 3 * 0xffff only from all-1 */
+ return;
}
- p=(short *)&lp->srom;
+ p = (__le16 *)&lp->srom;
for (i=0; i<(sizeof(struct de4x5_srom)>>1); i++) {
tmp = srom_rd(aprom_addr, i);
- *p++ = le16_to_cpu(tmp);
+ *p++ = cpu_to_le16(tmp);
}
de4x5_dbg_srom((struct de4x5_srom *)&lp->srom);
}
return pa; /* Points to the next entry */
}
-static void
-enable_ast(struct net_device *dev, u32 time_out)
-{
- timeout(dev, (void *)&de4x5_ast, (u_long)dev, time_out);
-
- return;
-}
-
static void
disable_ast(struct net_device *dev)
{
- struct de4x5_private *lp = netdev_priv(dev);
-
- del_timer(&lp->timer);
-
- return;
+ struct de4x5_private *lp = netdev_priv(dev);
+ del_timer_sync(&lp->timer);
}
static long
return 0;
}
-static void
-timeout(struct net_device *dev, void (*fn)(u_long data), u_long data, u_long msec)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int dt;
-
- /* First, cancel any pending timer events */
- del_timer(&lp->timer);
-
- /* Convert msec to ticks */
- dt = (msec * HZ) / 1000;
- if (dt==0) dt=1;
-
- /* Set up timer */
- init_timer(&lp->timer);
- lp->timer.expires = jiffies + dt;
- lp->timer.function = fn;
- lp->timer.data = data;
- add_timer(&lp->timer);
-
- return;
-}
-
static void
yawn(struct net_device *dev, int state)
{
tp->rx_ring[i].status = 0; /* Not owned by Tulip chip. */
tp->rx_ring[i].length = 0;
- tp->rx_ring[i].buffer1 = 0xBADF00D0; /* An invalid address. */
+ /* An invalid address. */
+ tp->rx_ring[i].buffer1 = cpu_to_le32(0xBADF00D0);
if (skb) {
pci_unmap_single(tp->pdev, mapping, PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
struct xircom_private {
/* Send and receive buffers, kernel-addressable and dma addressable forms */
- unsigned int *rx_buffer;
- unsigned int *tx_buffer;
+ __le32 *rx_buffer;
+ __le32 *tx_buffer;
dma_addr_t rx_dma_handle;
dma_addr_t tx_dma_handle;
/* FIXME: The specification tells us that the length we send HAS to be a multiple of
4 bytes. */
- card->tx_buffer[4*desc+1] = skb->len;
- if (desc == NUMDESCRIPTORS-1)
- card->tx_buffer[4*desc+1] |= (1<<25); /* bit 25: last descriptor of the ring */
+ card->tx_buffer[4*desc+1] = cpu_to_le32(skb->len);
+ if (desc == NUMDESCRIPTORS - 1) /* bit 25: last descriptor of the ring */
+ card->tx_buffer[4*desc+1] |= cpu_to_le32(1<<25);
- card->tx_buffer[4*desc+1] |= 0xF0000000;
+ card->tx_buffer[4*desc+1] |= cpu_to_le32(0xF0000000);
/* 0xF0... means want interrupts*/
card->tx_skb[desc] = skb;
wmb();
/* This gives the descriptor to the card */
- card->tx_buffer[4*desc] = 0x80000000;
+ card->tx_buffer[4*desc] = cpu_to_le32(0x80000000);
trigger_transmit(card);
- if (((int)card->tx_buffer[nextdescriptor*4])<0) { /* next descriptor is occupied... */
+ if (card->tx_buffer[nextdescriptor*4] & cpu_to_le32(0x8000000)) {
+ /* next descriptor is occupied... */
netif_stop_queue(dev);
}
card->transmit_used = nextdescriptor;
*/
static void setup_descriptors(struct xircom_private *card)
{
- unsigned int val;
- unsigned int address;
+ u32 address;
int i;
enter("setup_descriptors");
for (i=0;i<NUMDESCRIPTORS;i++ ) {
/* Rx Descr0: It's empty, let the card own it, no errors -> 0x80000000 */
- card->rx_buffer[i*4 + 0] = 0x80000000;
+ card->rx_buffer[i*4 + 0] = cpu_to_le32(0x80000000);
/* Rx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */
- card->rx_buffer[i*4 + 1] = 1536;
- if (i==NUMDESCRIPTORS-1)
- card->rx_buffer[i*4 + 1] |= (1 << 25); /* bit 25 is "last descriptor" */
+ card->rx_buffer[i*4 + 1] = cpu_to_le32(1536);
+ if (i == NUMDESCRIPTORS - 1) /* bit 25 is "last descriptor" */
+ card->rx_buffer[i*4 + 1] |= cpu_to_le32(1 << 25);
/* Rx Descr2: address of the buffer
we store the buffer at the 2nd half of the page */
- address = (unsigned long) card->rx_dma_handle;
+ address = card->rx_dma_handle;
card->rx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]);
/* Rx Desc3: address of 2nd buffer -> 0 */
card->rx_buffer[i*4 + 3] = 0;
wmb();
/* Write the receive descriptor ring address to the card */
- address = (unsigned long) card->rx_dma_handle;
- val = cpu_to_le32(address);
- outl(val, card->io_port + CSR3); /* Receive descr list address */
+ address = card->rx_dma_handle;
+ outl(address, card->io_port + CSR3); /* Receive descr list address */
/* transmit descriptors */
/* Tx Descr0: Empty, we own it, no errors -> 0x00000000 */
card->tx_buffer[i*4 + 0] = 0x00000000;
/* Tx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */
- card->tx_buffer[i*4 + 1] = 1536;
- if (i==NUMDESCRIPTORS-1)
- card->tx_buffer[i*4 + 1] |= (1 << 25); /* bit 25 is "last descriptor" */
+ card->tx_buffer[i*4 + 1] = cpu_to_le32(1536);
+ if (i == NUMDESCRIPTORS - 1) /* bit 25 is "last descriptor" */
+ card->tx_buffer[i*4 + 1] |= cpu_to_le32(1 << 25);
/* Tx Descr2: address of the buffer
we store the buffer at the 2nd half of the page */
- address = (unsigned long) card->tx_dma_handle;
+ address = card->tx_dma_handle;
card->tx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]);
/* Tx Desc3: address of 2nd buffer -> 0 */
card->tx_buffer[i*4 + 3] = 0;
wmb();
/* wite the transmit descriptor ring to the card */
- address = (unsigned long) card->tx_dma_handle;
- val =cpu_to_le32(address);
- outl(val, card->io_port + CSR4); /* xmit descr list address */
+ address = card->tx_dma_handle;
+ outl(address, card->io_port + CSR4); /* xmit descr list address */
leave("setup_descriptors");
}
int status;
enter("investigate_read_descriptor");
- status = card->rx_buffer[4*descnr];
+ status = le32_to_cpu(card->rx_buffer[4*descnr]);
if ((status > 0)) { /* packet received */
out:
/* give the buffer back to the card */
- card->rx_buffer[4*descnr] = 0x80000000;
+ card->rx_buffer[4*descnr] = cpu_to_le32(0x80000000);
trigger_receive(card);
}
enter("investigate_write_descriptor");
- status = card->tx_buffer[4*descnr];
+ status = le32_to_cpu(card->tx_buffer[4*descnr]);
#if 0
if (status & 0x8000) { /* Major error */
printk(KERN_ERR "Major transmit error status %x \n", status);
buf,
size,
USB_CTRL_GET_TIMEOUT);
- if (err >= 0 && err < size)
- err = -EINVAL;
- if (!err)
+ if (err == size)
memcpy(data, buf, size);
+ else if (err >= 0)
+ err = -EINVAL;
kfree(buf);
out:
static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev,
__le32 *mac)
{
- rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, &mac,
+ rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, mac,
(3 * sizeof(__le16)));
}
struct data_entry *entry;
struct data_desc *rxd;
struct sk_buff *skb;
+ struct ieee80211_hdr *hdr;
struct rxdata_entry_desc desc;
+ int header_size;
+ int align;
u32 word;
while (1) {
memset(&desc, 0x00, sizeof(desc));
rt2x00dev->ops->lib->fill_rxdone(entry, &desc);
+ hdr = (struct ieee80211_hdr *)entry->data_addr;
+ header_size =
+ ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control));
+
+ /*
+ * The data behind the ieee80211 header must be
+ * aligned on a 4 byte boundary.
+ */
+ align = NET_IP_ALIGN + (2 * (header_size % 4 == 0));
+
/*
* Allocate the sk_buffer, initialize it and copy
* all data into it.
*/
- skb = dev_alloc_skb(desc.size + NET_IP_ALIGN);
+ skb = dev_alloc_skb(desc.size + align);
if (!skb)
return;
- skb_reserve(skb, NET_IP_ALIGN);
- skb_put(skb, desc.size);
- memcpy(skb->data, entry->data_addr, desc.size);
+ skb_reserve(skb, align);
+ memcpy(skb_put(skb, desc.size), entry->data_addr, desc.size);
/*
* Send the frame to rt2x00lib for further processing.
struct data_ring *ring = entry->ring;
struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;
struct sk_buff *skb;
+ struct ieee80211_hdr *hdr;
struct rxdata_entry_desc desc;
+ int header_size;
int frame_size;
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
skb_put(skb, frame_size);
/*
- * Trim the skb_buffer to only contain the valid
- * frame data (so ignore the device's descriptor).
+ * The data behind the ieee80211 header must be
+ * aligned on a 4 byte boundary.
+ * After that trim the entire buffer down to only
+ * contain the valid frame data excluding the device
+ * descriptor.
*/
+ hdr = (struct ieee80211_hdr *)entry->skb->data;
+ header_size =
+ ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control));
+
+ if (header_size % 4 == 0) {
+ skb_push(entry->skb, 2);
+ memmove(entry->skb->data, entry->skb->data + 2, skb->len - 2);
+ }
skb_trim(entry->skb, desc.size);
/*
{
struct data_ring *ring;
struct data_entry *entry;
+ struct data_entry *entry_done;
struct data_desc *txd;
u32 word;
u32 reg;
!rt2x00_get_field32(word, TXD_W0_VALID))
return;
+ entry_done = rt2x00_get_data_entry_done(ring);
+ while (entry != entry_done) {
+ /* Catch up. Just report any entries we missed as
+ * failed. */
+ WARNING(rt2x00dev,
+ "TX status report missed for entry %p\n",
+ entry_done);
+ rt2x00lib_txdone(entry_done, TX_FAIL_OTHER, 0);
+ entry_done = rt2x00_get_data_entry_done(ring);
+ }
+
/*
* Obtain the status about this packet.
*/
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich6_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich6_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich6_lpc_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich6_lpc_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich6_lpc_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich6_lpc_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich6_lpc_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich6_lpc_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich6_lpc_acpi );
/*
* VIA ACPI: One IO region pointed to by longword at
int i = 0;
int irq;
int p, t;
+ static unsigned char warned;
if (!valid_IRQ(gsi))
return;
while (!(res->irq_resource[i].flags & IORESOURCE_UNSET) &&
i < PNP_MAX_IRQ)
i++;
- if (i >= PNP_MAX_IRQ) {
+ if (i >= PNP_MAX_IRQ && !warned) {
printk(KERN_ERR "pnpacpi: exceeded the max number of IRQ "
"resources: %d \n", PNP_MAX_IRQ);
+ warned = 1;
return;
}
/*
int bus_master, int transfer)
{
int i = 0;
+ static unsigned char warned;
while (i < PNP_MAX_DMA &&
!(res->dma_resource[i].flags & IORESOURCE_UNSET))
}
res->dma_resource[i].start = dma;
res->dma_resource[i].end = dma;
- } else {
+ } else if (!warned) {
printk(KERN_ERR "pnpacpi: exceeded the max number of DMA "
"resources: %d \n", PNP_MAX_DMA);
+ warned = 1;
}
}
u64 io, u64 len, int io_decode)
{
int i = 0;
+ static unsigned char warned;
while (!(res->port_resource[i].flags & IORESOURCE_UNSET) &&
i < PNP_MAX_PORT)
}
res->port_resource[i].start = io;
res->port_resource[i].end = io + len - 1;
- } else {
+ } else if (!warned) {
printk(KERN_ERR "pnpacpi: exceeded the max number of IO "
"resources: %d \n", PNP_MAX_PORT);
}
int write_protect)
{
int i = 0;
+ static unsigned char warned;
while (!(res->mem_resource[i].flags & IORESOURCE_UNSET) &&
(i < PNP_MAX_MEM))
res->mem_resource[i].start = mem;
res->mem_resource[i].end = mem + len - 1;
- } else {
+ } else if (!warned) {
printk(KERN_ERR "pnpacpi: exceeded the max number of mem "
"resources: %d\n", PNP_MAX_MEM);
}
#define ASC_IOADR_TABLE_MAX_IX 11
-static PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] __devinitdata = {
+static PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] = {
0x100, 0x0110, 0x120, 0x0130, 0x140, 0x0150, 0x0190,
0x0210, 0x0230, 0x0250, 0x0330
};
return ret;
}
-static void __devexit
+static void
qla2x00_remove_one(struct pci_dev *pdev)
{
scsi_qla_host_t *ha;
},
.id_table = qla2xxx_pci_tbl,
.probe = qla2x00_probe_one,
- .remove = __devexit_p(qla2x00_remove_one),
+ .remove = qla2x00_remove_one,
.err_handler = &qla2xxx_err_handler,
};
module_exit(atmel_lcdfb_exit);
MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
-MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
MODULE_LICENSE("GPL");
clk_enable(info->clk);
msleep(1);
- s3c2410fb_init_registers(info);
+ s3c2410fb_init_registers(fbinfo);
return 0;
}
};
static int mtrr __devinitdata = 3; /* enable mtrr by default */
-static int blank __devinitdata = 1; /* enable blanking by default */
+static int blank = 1; /* enable blanking by default */
static int ypan __devinitdata = 1; /* 0: scroll, 1: ypan, 2: ywrap */
static int pmi_setpal __devinitdata = 1; /* use PMI for palette changes */
static int nocrtc __devinitdata; /* ignore CRTC settings */
info->fbops->fb_pan_display = NULL;
}
-static void uvesafb_init_mtrr(struct fb_info *info)
+static void __devinit uvesafb_init_mtrr(struct fb_info *info)
{
#ifdef CONFIG_MTRR
if (mtrr && !(info->fix.smem_start & (PAGE_SIZE - 1))) {
w1_search_devices(dev, search_type, w1_slave_found);
list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
- if (!test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags) && !--sl->ttl) {
+ if (!test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags) && !--sl->ttl)
w1_slave_detach(sl);
-
- dev->slave_count--;
- } else if (test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags))
+ else if (test_bit(W1_SLAVE_ACTIVE, (unsigned long *)&sl->flags))
sl->ttl = dev->slave_ttl;
}
if (wbc->nr_to_write <= 0)
break;
}
- if (!list_empty(&sb->s_more_io))
- wbc->more_io = 1;
return; /* Leave any unwritten inodes on s_io */
}
if (S_ISLNK(inode->i_mode))
return -ELOOP;
- if (S_ISDIR(inode->i_mode) && (flag & FMODE_WRITE))
+ if (S_ISDIR(inode->i_mode) && (acc_mode & MAY_WRITE))
return -EISDIR;
/*
return -EACCES;
flag &= ~O_TRUNC;
- } else if (IS_RDONLY(inode) && (flag & FMODE_WRITE))
+ } else if (IS_RDONLY(inode) && (acc_mode & MAY_WRITE))
return -EROFS;
error = vfs_permission(nd, acc_mode);
* Round the length of the data which was specified up to
* the next multiple of XDR units and then compare that
* against the length which was actually received.
+ * Note that when RPCSEC/GSS (for example) is used, the
+ * data buffer can be padded so dlen might be larger
+ * than required. It must never be smaller.
*/
- if (dlen != XDR_QUADLEN(len)*4)
+ if (dlen < XDR_QUADLEN(len)*4)
return 0;
if (args->count > max_blocksize) {
* Round the length of the data which was specified up to
* the next multiple of XDR units and then compare that
* against the length which was actually received.
+ * Note that when RPCSEC/GSS (for example) is used, the
+ * data buffer can be padded so dlen might be larger
+ * than required. It must never be smaller.
*/
- if (dlen != XDR_QUADLEN(len)*4)
+ if (dlen < XDR_QUADLEN(len)*4)
return 0;
rqstp->rq_vec[0].iov_base = (void*)p;
ppid = pid_alive(p) ?
task_tgid_nr_ns(rcu_dereference(p->real_parent), ns) : 0;
tpid = pid_alive(p) && p->ptrace ?
- task_ppid_nr_ns(rcu_dereference(p->parent), ns) : 0;
+ task_pid_nr_ns(rcu_dereference(p->parent), ns) : 0;
buffer += sprintf(buffer,
"State:\t%s\n"
"Tgid:\t%d\n"
}
sid = task_session_nr_ns(task, ns);
+ ppid = task_tgid_nr_ns(task->real_parent, ns);
pgid = task_pgrp_nr_ns(task, ns);
- ppid = task_ppid_nr_ns(task, ns);
unlock_task_sighand(task, &flags);
}
#define cpu_is_pxa21x() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa21x(id); \
+ __cpu_is_pxa21x(read_cpuid_id()); \
})
#define cpu_is_pxa25x() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa25x(id); \
+ __cpu_is_pxa25x(read_cpuid_id()); \
})
#define cpu_is_pxa27x() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa27x(id); \
+ __cpu_is_pxa27x(read_cpuid_id()); \
})
#define cpu_is_pxa300() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa300(id); \
+ __cpu_is_pxa300(read_cpuid_id()); \
})
#define cpu_is_pxa310() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa310(id); \
+ __cpu_is_pxa310(read_cpuid_id()); \
})
#define cpu_is_pxa320() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa320(id); \
+ __cpu_is_pxa320(read_cpuid_id()); \
})
/*
#define cpu_is_pxa2xx() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa2xx(id); \
+ __cpu_is_pxa2xx(read_cpuid_id()); \
})
#define cpu_is_pxa3xx() \
({ \
- unsigned int id = read_cpuid(CPUID_ID); \
- __cpu_is_pxa3xx(id); \
+ __cpu_is_pxa3xx(read_cpuid_id()); \
})
/*
#ifndef __ASSEMBLY__
#include <linux/linkage.h>
+#include <linux/stringify.h>
#include <linux/irqflags.h>
+/*
+ * The CPU ID never changes at run time, so we might as well tell the
+ * compiler that it's constant. Use this function to read the CPU ID
+ * rather than directly reading processor_id or read_cpuid() directly.
+ */
+static inline unsigned int read_cpuid_id(void) __attribute_const__;
+
+static inline unsigned int read_cpuid_id(void)
+{
+ return read_cpuid(CPUID_ID);
+}
+
#define __exception __attribute__((section(".exception.text")))
struct thread_info;
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
/*
* "Conditional" syscalls
#define Page_Invalidate_T 0x16
/*
- * R1000-specific cacheops
+ * R10000-specific cacheops
*
* Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
* Most of the _S cacheops are identical to the R4000SC _SD cacheops.
#ifndef LINUX_I2C_ID_H
#define LINUX_I2C_ID_H
+/* Please note that I2C driver IDs are optional. They are only needed if a
+ legacy chip driver needs to identify a bus or a bus driver needs to
+ identify a legacy client. If you don't need them, just don't set them. */
+
/*
* ---- Driver types -----------------------------------------------------
*/
#define PCI_DEVICE_ID_INTEL_ICH9_4 0x2914
#define PCI_DEVICE_ID_INTEL_ICH9_5 0x2919
#define PCI_DEVICE_ID_INTEL_ICH9_6 0x2930
+#define PCI_DEVICE_ID_INTEL_ICH9_7 0x2916
+#define PCI_DEVICE_ID_INTEL_ICH9_8 0x2918
#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340
#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
device_set_wakeup_enable(dev,val); \
} while(0)
+/*
+ * Global Power Management flags
+ * Used to keep APM and ACPI from both being active
+ */
+extern unsigned int pm_flags;
+
+#define PM_APM 1
+#define PM_ACPI 2
+
#endif /* __KERNEL__ */
#endif /* _LINUX_PM_H */
#ifdef CONFIG_PM_LEGACY
-extern int pm_active;
-
-#define PM_IS_ACTIVE() (pm_active != 0)
-
/*
* Register a device with power management
*/
#else /* CONFIG_PM_LEGACY */
-#define PM_IS_ACTIVE() 0
-
static inline struct pm_dev *pm_register(pm_dev_t type,
unsigned long id,
pm_callback callback)
#include <linux/errno.h>
#include <linux/mod_devicetable.h>
-#define PNP_MAX_PORT 24
+#define PNP_MAX_PORT 40
#define PNP_MAX_MEM 12
#define PNP_MAX_IRQ 2
#define PNP_MAX_DMA 2
*
* set_task_vxid() : assigns a virtual id to a task;
*
- * task_ppid_nr_ns() : the parent's id as seen from the namespace specified.
- * the result depends on the namespace and whether the
- * task in question is the namespace's init. e.g. for the
- * namespace's init this will return 0 when called from
- * the namespace of this init, or appropriate id otherwise.
- *
- *
* see also pid_nr() etc in include/linux/pid.h
*/
}
-static inline pid_t task_ppid_nr_ns(struct task_struct *tsk,
- struct pid_namespace *ns)
-{
- return pid_nr_ns(task_pid(rcu_dereference(tsk->real_parent)), ns);
-}
-
/**
* pid_alive - check that a task structure is not stale
* @p: Task structure to be checked.
unsigned for_reclaim:1; /* Invoked from the page allocator */
unsigned for_writepages:1; /* This is a writepages() call */
unsigned range_cyclic:1; /* range_start is cyclic */
- unsigned more_io:1; /* more io to be dispatched */
};
/*
/* For kallsyms to ask for address resolution. NULL means not found.
We don't lock, as this is used for oops resolution and races are a
lesser concern. */
+/* FIXME: Risky: returns a pointer into a module w/o lock */
const char *module_address_lookup(unsigned long addr,
unsigned long *size,
unsigned long *offset,
char **modname)
{
struct module *mod;
+ const char *ret = NULL;
+ preempt_disable();
list_for_each_entry(mod, &modules, list) {
if (within(addr, mod->module_init, mod->init_size)
|| within(addr, mod->module_core, mod->core_size)) {
if (modname)
*modname = mod->name;
- return get_ksymbol(mod, addr, size, offset);
+ ret = get_ksymbol(mod, addr, size, offset);
+ break;
}
}
- return NULL;
+ preempt_enable();
+ return ret;
}
int lookup_module_symbol_name(unsigned long addr, char *symname)
{
struct module *mod;
- mutex_lock(&module_mutex);
+ preempt_disable();
list_for_each_entry(mod, &modules, list) {
if (within(addr, mod->module_init, mod->init_size) ||
within(addr, mod->module_core, mod->core_size)) {
if (!sym)
goto out;
strlcpy(symname, sym, KSYM_NAME_LEN);
- mutex_unlock(&module_mutex);
+ preempt_enable();
return 0;
}
}
out:
- mutex_unlock(&module_mutex);
+ preempt_enable();
return -ERANGE;
}
{
struct module *mod;
- mutex_lock(&module_mutex);
+ preempt_disable();
list_for_each_entry(mod, &modules, list) {
if (within(addr, mod->module_init, mod->init_size) ||
within(addr, mod->module_core, mod->core_size)) {
strlcpy(modname, mod->name, MODULE_NAME_LEN);
if (name)
strlcpy(name, sym, KSYM_NAME_LEN);
- mutex_unlock(&module_mutex);
+ preempt_enable();
return 0;
}
}
out:
- mutex_unlock(&module_mutex);
+ preempt_enable();
return -ERANGE;
}
{
struct module *mod;
- mutex_lock(&module_mutex);
+ preempt_disable();
list_for_each_entry(mod, &modules, list) {
if (symnum < mod->num_symtab) {
*value = mod->symtab[symnum].st_value;
KSYM_NAME_LEN);
strlcpy(module_name, mod->name, MODULE_NAME_LEN);
*exported = is_exported(name, mod);
- mutex_unlock(&module_mutex);
+ preempt_enable();
return 0;
}
symnum -= mod->num_symtab;
}
- mutex_unlock(&module_mutex);
+ preempt_enable();
return -ERANGE;
}
unsigned long ret = 0;
/* Don't lock: we're in enough trouble already. */
+ preempt_disable();
if ((colon = strchr(name, ':')) != NULL) {
*colon = '\0';
if ((mod = find_module(name)) != NULL)
if ((ret = mod_find_symname(mod, name)) != 0)
break;
}
+ preempt_enable();
return ret;
}
#endif /* CONFIG_KALLSYMS */
DEFINE_MUTEX(pm_mutex);
+unsigned int pm_flags;
+EXPORT_SYMBOL(pm_flags);
+
#ifdef CONFIG_SUSPEND
/* This is just an arbitrary number */
#include <linux/interrupt.h>
#include <linux/mutex.h>
-int pm_active;
-
/*
* Locking notes:
* pm_devs_lock can be a semaphore providing pm ops are not called
EXPORT_SYMBOL(pm_register);
EXPORT_SYMBOL(pm_send_all);
-EXPORT_SYMBOL(pm_active);
-
int pid;
rcu_read_lock();
- pid = task_ppid_nr_ns(current, current->nsproxy->pid_ns);
+ pid = task_tgid_nr_ns(current->real_parent, current->nsproxy->pid_ns);
rcu_read_unlock();
return pid;
if (free_huge_pages > resv_huge_pages)
page = dequeue_huge_page(vma, addr);
spin_unlock(&hugetlb_lock);
- if (!page)
+ if (!page) {
page = alloc_buddy_huge_page(vma, addr);
- return page ? page : ERR_PTR(-VM_FAULT_OOM);
+ if (!page) {
+ hugetlb_put_quota(vma->vm_file->f_mapping, 1);
+ return ERR_PTR(-VM_FAULT_OOM);
+ }
+ }
+ return page;
}
static struct page *alloc_huge_page(struct vm_area_struct *vma,
if (hugetlb_get_quota(inode->i_mapping, chg))
return -ENOSPC;
ret = hugetlb_acct_memory(chg);
- if (ret < 0)
+ if (ret < 0) {
+ hugetlb_put_quota(inode->i_mapping, chg);
return ret;
+ }
region_add(&inode->i_mapping->private_list, from, to);
return 0;
}
global_page_state(NR_UNSTABLE_NFS) < background_thresh
&& min_pages <= 0)
break;
- wbc.more_io = 0;
wbc.encountered_congestion = 0;
wbc.nr_to_write = MAX_WRITEBACK_PAGES;
wbc.pages_skipped = 0;
min_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
/* Wrote less than expected */
- if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(WRITE, HZ/10);
- else
+ congestion_wait(WRITE, HZ/10);
+ if (!wbc.encountered_congestion)
break;
}
}
global_page_state(NR_UNSTABLE_NFS) +
(inodes_stat.nr_inodes - inodes_stat.nr_unused);
while (nr_to_write > 0) {
- wbc.more_io = 0;
wbc.encountered_congestion = 0;
wbc.nr_to_write = MAX_WRITEBACK_PAGES;
writeback_inodes(&wbc);
if (wbc.nr_to_write > 0) {
- if (wbc.encountered_congestion || wbc.more_io)
+ if (wbc.encountered_congestion)
congestion_wait(WRITE, HZ/10);
else
break; /* All the old data is written */
static unsigned long max_pages(unsigned long min_pages)
{
unsigned long node_free_pages, max;
+ struct zone *zones = NODE_DATA(numa_node_id())->node_zones;
+
+ node_free_pages =
+#ifdef CONFIG_ZONE_DMA
+ zone_page_state(&zones[ZONE_DMA], NR_FREE_PAGES) +
+#endif
+#ifdef CONFIG_ZONE_DMA32
+ zone_page_state(&zones[ZONE_DMA32], NR_FREE_PAGES) +
+#endif
+ zone_page_state(&zones[ZONE_NORMAL], NR_FREE_PAGES);
- node_free_pages = node_page_state(numa_node_id(),
- NR_FREE_PAGES);
max = node_free_pages / FRACTION_OF_NODE_MEM;
return max(max, min_pages);
}
static int __init rif_init(void)
{
init_timer(&rif_timer);
- rif_timer.expires = sysctl_tr_rif_timeout;
+ rif_timer.expires = jiffies + sysctl_tr_rif_timeout;
rif_timer.data = 0L;
rif_timer.function = rif_check_expire;
add_timer(&rif_timer);
static int vlan_dev_init(struct net_device *dev)
{
struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev;
+ int subclass = 0;
/* IFF_BROADCAST|IFF_MULTICAST; ??? */
dev->flags = real_dev->flags & ~IFF_UP;
dev->hard_start_xmit = vlan_dev_hard_start_xmit;
}
- lockdep_set_class(&dev->_xmit_lock, &vlan_netdev_xmit_lock_key);
+ if (real_dev->priv_flags & IFF_802_1Q_VLAN)
+ subclass = 1;
+
+ lockdep_set_class_and_subclass(&dev->_xmit_lock,
+ &vlan_netdev_xmit_lock_key, subclass);
return 0;
}
return;
spin_lock_bh(&ax25_list_lock);
+again:
ax25_for_each(s, node, &ax25_list) {
if (s->ax25_dev == ax25_dev) {
s->ax25_dev = NULL;
+ spin_unlock_bh(&ax25_list_lock);
ax25_disconnect(s, ENETUNREACH);
+ spin_lock_bh(&ax25_list_lock);
+
+ /* The entry could have been deleted from the
+ * list meanwhile and thus the next pointer is
+ * no longer valid. Play it safe and restart
+ * the scan. Forward progress is ensured
+ * because we set s->ax25_dev to NULL and we
+ * are never passed a NULL 'dev' argument.
+ */
+ goto again;
}
}
spin_unlock_bh(&ax25_list_lock);
* some sanity checks. code further down depends on this
*/
- if (addr_len == sizeof(struct sockaddr_ax25)) {
- /* support for this will go away in early 2.5.x */
- printk(KERN_WARNING "ax25_connect(): %s uses obsolete socket structure\n",
- current->comm);
- }
- else if (addr_len != sizeof(struct full_sockaddr_ax25)) {
- /* support for old structure may go away some time */
+ if (addr_len == sizeof(struct sockaddr_ax25))
+ /* support for this will go away in early 2.5.x
+ * ax25_connect(): uses obsolete socket structure
+ */
+ ;
+ else if (addr_len != sizeof(struct full_sockaddr_ax25))
+ /* support for old structure may go away some time
+ * ax25_connect(): uses old (6 digipeater) socket structure.
+ */
if ((addr_len < sizeof(struct sockaddr_ax25) + sizeof(ax25_address) * 6) ||
- (addr_len > sizeof(struct full_sockaddr_ax25))) {
+ (addr_len > sizeof(struct full_sockaddr_ax25)))
return -EINVAL;
- }
- printk(KERN_WARNING "ax25_connect(): %s uses old (6 digipeater) socket structure.\n",
- current->comm);
- }
if (fsa->fsa_ax25.sax25_family != AF_AX25)
return -EINVAL;
goto out;
}
- if (addr_len == sizeof(struct sockaddr_ax25)) {
- printk(KERN_WARNING "ax25_sendmsg(): %s uses obsolete socket structure\n",
- current->comm);
- }
- else if (addr_len != sizeof(struct full_sockaddr_ax25)) {
- /* support for old structure may go away some time */
+ if (addr_len == sizeof(struct sockaddr_ax25))
+ /* ax25_sendmsg(): uses obsolete socket structure */
+ ;
+ else if (addr_len != sizeof(struct full_sockaddr_ax25))
+ /* support for old structure may go away some time
+ * ax25_sendmsg(): uses old (6 digipeater)
+ * socket structure.
+ */
if ((addr_len < sizeof(struct sockaddr_ax25) + sizeof(ax25_address) * 6) ||
(addr_len > sizeof(struct full_sockaddr_ax25))) {
err = -EINVAL;
goto out;
}
- printk(KERN_WARNING "ax25_sendmsg(): %s uses old (6 digipeater) socket structure.\n",
- current->comm);
- }
if (addr_len > sizeof(struct sockaddr_ax25) && usax->sax25_ndigis != 0) {
int ct = 0;
BT_DBG("dev %p dlc %p", dev, dlc);
- write_lock_bh(&rfcomm_dev_lock);
- list_del_init(&dev->list);
- write_unlock_bh(&rfcomm_dev_lock);
+ /* Refcount should only hit zero when called from rfcomm_dev_del()
+ which will have taken us off the list. Everything else are
+ refcounting bugs. */
+ BUG_ON(!list_empty(&dev->list));
rfcomm_dlc_lock(dlc);
/* Detach DLC if it's owned by this dev */
tty_unregister_device(rfcomm_tty_driver, dev->id);
- /* Refcount should only hit zero when called from rfcomm_dev_del()
- which will have taken us off the list. Everything else are
- refcounting bugs. */
- BUG_ON(!list_empty(&dev->list));
-
kfree(dev);
/* It's safe to call module_put() here because socket still
{
BT_DBG("dev %p", dev);
- set_bit(RFCOMM_TTY_RELEASED, &dev->flags);
+ if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags))
+ BUG_ON(1);
+ else
+ set_bit(RFCOMM_TTY_RELEASED, &dev->flags);
+
+ write_lock_bh(&rfcomm_dev_lock);
+ list_del_init(&dev->list);
+ write_unlock_bh(&rfcomm_dev_lock);
+
rfcomm_dev_put(dev);
}
* Let us first consider the case that ip_route_input() succeeds:
*
* If skb->dst->dev equals the logical bridge device the packet
- * came in on, we can consider this bridging. We then call
- * skb->dst->output() which will make the packet enter br_nf_local_out()
+ * came in on, we can consider this bridging. The packet is passed
+ * through the neighbour output function to build a new destination
+ * MAC address, which will make the packet enter br_nf_local_out()
* not much later. In that function it is assured that the iptables
* FORWARD chain is traversed for the packet.
*
skb->nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
skb->dev = bridge_parent(skb->dev);
- if (!skb->dev)
- kfree_skb(skb);
- else {
+ if (skb->dev) {
+ struct dst_entry *dst = skb->dst;
+
nf_bridge_pull_encap_header(skb);
- skb->dst->output(skb);
+
+ if (dst->hh)
+ return neigh_hh_output(dst->hh, skb);
+ else if (dst->neighbour)
+ return dst->neighbour->output(skb);
}
+ kfree_skb(skb);
return 0;
}
*p = parms->next;
parms->dead = 1;
write_unlock_bh(&tbl->lock);
- if (parms->dev)
- dev_put(parms->dev);
call_rcu(&parms->rcu_head, neigh_rcu_free_parms);
return;
}
void neigh_parms_destroy(struct neigh_parms *parms)
{
+ if (parms->dev)
+ dev_put(parms->dev);
kfree(parms);
}
break;
rcu_read_unlock_bh();
}
- return rt;
+ return rcu_dereference(rt);
}
static struct dn_route *dn_rt_cache_get_next(struct seq_file *seq, struct dn_route *rt)
{
- struct dn_rt_cache_iter_state *s = rcu_dereference(seq->private);
+ struct dn_rt_cache_iter_state *s = seq->private;
rt = rt->u.dst.dn_next;
while(!rt) {
rcu_read_lock_bh();
rt = dn_rt_hash_table[s->bucket].chain;
}
- return rt;
+ return rcu_dereference(rt);
}
static void *dn_rt_cache_seq_start(struct seq_file *seq, loff_t *pos)
break;
rcu_read_unlock_bh();
}
- return r;
+ return rcu_dereference(r);
}
static struct rtable *rt_cache_get_next(struct seq_file *seq, struct rtable *r)
{
- struct rt_cache_iter_state *st = rcu_dereference(seq->private);
+ struct rt_cache_iter_state *st = seq->private;
r = r->u.dst.rt_next;
while (!r) {
rcu_read_lock_bh();
r = rt_hash_table[st->bucket].chain;
}
- return r;
+ return rcu_dereference(r);
}
static struct rtable *rt_cache_get_idx(struct seq_file *seq, loff_t pos)
memcpy(eui64 + 5, eth_hdr(skb)->h_source + 3, 3);
eui64[3] = 0xff;
eui64[4] = 0xfe;
- eui64[0] |= 0x02;
+ eui64[0] ^= 0x02;
i = 0;
while (ipv6_hdr(skb)->saddr.s6_addr[8 + i] == eui64[i]
if (info->name[0] == '\0')
ret = !ret;
else
- ret ^= !strncmp(master_help->helper->name, info->name,
- strlen(master_help->helper->name));
+ ret ^= !strncmp(helper->name, info->name,
+ strlen(helper->name));
return ret;
}
spinlock_t lock;
int nresets;
unsigned long recsrc;
- int left_levels[16];
- int right_levels[16];
+ int left_levels[32];
+ int right_levels[32];
int mixer_mod_count;
int calibrate_signal;
int play_sample_size, play_sample_rate, play_channels;
git.openpandora.org / pandora-kernel.git / commitdiff