--- /dev/null
+/* linux/arch/arm/mach-s3c2410/mach-anubis.c
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 02-May-2005 BJD Copied from mach-bast.c
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/anubis-map.h>
+#include <asm/arch/anubis-irq.h>
+#include <asm/arch/anubis-cpld.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include "clock.h"
+#include "devs.h"
+#include "cpu.h"
+
+#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+
+static struct map_desc anubis_iodesc[] __initdata = {
+ /* ISA IO areas */
+
+ { (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE },
+ { (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE },
+
+ /* we could possibly compress the next set down into a set of smaller tables
+ * pagetables, but that would mean using an L2 section, and it still means
+ * we cannot actually feed the same register to an LDR due to 16K spacing
+ */
+
+ /* CPLD control registers */
+
+ { (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE },
+ { (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE },
+
+ /* IDE drives */
+
+ { (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE },
+ { (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE },
+
+ { (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE },
+ { (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
+ [0] = {
+ .name = "uclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+ [1] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0.
+ }
+};
+
+
+static struct s3c2410_uartcfg anubis_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = anubis_serial_clocks,
+ .clocks_size = ARRAY_SIZE(anubis_serial_clocks)
+ },
+ [1] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = anubis_serial_clocks,
+ .clocks_size = ARRAY_SIZE(anubis_serial_clocks)
+ },
+};
+
+/* NAND Flash on Anubis board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+struct mtd_partition anubis_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Anubis has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set anubis_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
+ .partitions = anubis_default_nand_part
+ },
+};
+
+static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(ANUBIS_VA_CTRL1);
+ tmp &= ~ANUBIS_CTRL1_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
+
+ __raw_writeb(tmp, ANUBIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand anubis_nand_info = {
+ .tacls = 25,
+ .twrph0 = 80,
+ .twrph1 = 80,
+ .nr_sets = ARRAY_SIZE(anubis_nand_sets),
+ .sets = anubis_nand_sets,
+ .select_chip = anubis_nand_select,
+};
+
+
+/* Standard Anubis devices */
+
+static struct platform_device *anubis_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_wdt,
+ &s3c_device_adc,
+ &s3c_device_i2c,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+};
+
+static struct clk *anubis_clocks[] = {
+ &s3c24xx_dclk0,
+ &s3c24xx_dclk1,
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+ &s3c24xx_uclk,
+};
+
+static struct s3c24xx_board anubis_board __initdata = {
+ .devices = anubis_devices,
+ .devices_count = ARRAY_SIZE(anubis_devices),
+ .clocks = anubis_clocks,
+ .clocks_count = ARRAY_SIZE(anubis_clocks)
+};
+
+void __init anubis_map_io(void)
+{
+ /* initialise the clocks */
+
+ s3c24xx_dclk0.parent = NULL;
+ s3c24xx_dclk0.rate = 12*1000*1000;
+
+ s3c24xx_dclk1.parent = NULL;
+ s3c24xx_dclk1.rate = 24*1000*1000;
+
+ s3c24xx_clkout0.parent = &s3c24xx_dclk0;
+ s3c24xx_clkout1.parent = &s3c24xx_dclk1;
+
+ s3c24xx_uclk.parent = &s3c24xx_clkout1;
+
+ s3c_device_nand.dev.platform_data = &anubis_nand_info;
+
+ s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+ s3c24xx_set_board(&anubis_board);
+
+ /* ensure that the GPIO is setup */
+ s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+}
+
+MACHINE_START(ANUBIS, "Simtec-Anubis")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .phys_ram = S3C2410_SDRAM_PA,
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = anubis_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+/* linux/include/asm-arm/arch-s3c2410/anubis-map.h
+ *
+ * (c) 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+*/
+
+/* needs arch/map.h including with this */
+
+#ifndef __ASM_ARCH_ANUBISMAP_H
+#define __ASM_ARCH_ANUBISMAP_H
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x02000000))
+
+#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01300000 */
+#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD)
+
+#define ANUBIS_VA_CTRL2 ANUBIS_IOADDR(0x00100000) /* 0x01400000 */
+#define ANUBIS_PA_CTRL2 (ANUBIS_PA_CPLD)
+
+#define ANUBIS_VA_CTRL3 ANUBIS_IOADDR(0x00200000) /* 0x01500000 */
+#define ANUBIS_PA_CTRL3 (ANUBIS_PA_CPLD)
+
+#define ANUBIS_VA_CTRL4 ANUBIS_IOADDR(0x00300000) /* 0x01600000 */
+#define ANUBIS_PA_CTRL4 (ANUBIS_PA_CPLD)
+
+#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000)
+
+#endif /* __ASM_ARCH_ANUBISMAP_H */
git.openpandora.org / pandora-kernel.git / commitdiff