x86: merge 64bit setup_arch into setup_32

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 0b69483..f3177ba 100644 (file)
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -372,26 +372,38 @@ static void __init reserve_initrd(void)
  * global efi_enabled. This allows the same kernel image to be used on existing
  * systems (with a traditional BIOS) as well as on EFI systems.
  */
+/*
+ * setup_arch - architecture-specific boot-time initializations
+ *
+ * Note: On x86_64, fixmaps are ready for use even before this is called.
+ */
+
 void __init setup_arch(char **cmdline_p)
 {
+#ifdef CONFIG_X86_32
        memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
        pre_setup_arch_hook();
        early_cpu_init();
        early_ioremap_init();
        reserve_setup_data();
+#else
+       printk(KERN_INFO "Command line: %s\n", boot_command_line);
+#endif
 
        ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
        screen_info = boot_params.screen_info;
        edid_info = boot_params.edid_info;
+#ifdef CONFIG_X86_32
        apm_info.bios = boot_params.apm_bios_info;
        ist_info = boot_params.ist_info;
-       saved_video_mode = boot_params.hdr.vid_mode;
-       if( boot_params.sys_desc_table.length != 0 ) {
+       if (boot_params.sys_desc_table.length != 0) {
                set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
                machine_id = boot_params.sys_desc_table.table[0];
                machine_submodel_id = boot_params.sys_desc_table.table[1];
                BIOS_revision = boot_params.sys_desc_table.table[2];
        }
+#endif
+       saved_video_mode = boot_params.hdr.vid_mode;
        bootloader_type = boot_params.hdr.type_of_loader;
 
 #ifdef CONFIG_BLK_DEV_RAM
@@ -401,7 +413,12 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #ifdef CONFIG_EFI
        if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
-                    "EL32", 4)) {
+#ifdef CONFIG_X86_32
+                    "EL32",
+#else
+                    "EL64",
+#endif
+        4)) {
                efi_enabled = 1;
                efi_reserve_early();
        }
@@ -417,7 +434,11 @@ void __init setup_arch(char **cmdline_p)
        init_mm.start_code = (unsigned long) _text;
        init_mm.end_code = (unsigned long) _etext;
        init_mm.end_data = (unsigned long) _edata;
+#ifdef CONFIG_X86_32
        init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
+#else
+       init_mm.brk = (unsigned long) &_end;
+#endif
 
        code_resource.start = virt_to_phys(_text);
        code_resource.end = virt_to_phys(_etext)-1;
@@ -426,6 +447,9 @@ void __init setup_arch(char **cmdline_p)
        bss_resource.start = virt_to_phys(&__bss_start);
        bss_resource.end = virt_to_phys(&__bss_stop)-1;
 
+#ifdef CONFIG_X86_64
+       early_cpu_init();
+#endif
        strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
        *cmdline_p = command_line;
 
@@ -433,16 +457,27 @@ void __init setup_arch(char **cmdline_p)
 
        parse_early_param();
 
-       if (acpi_mps_check()){
+       if (acpi_mps_check()) {
 #ifdef CONFIG_X86_LOCAL_APIC
+#ifdef CONFIG_X86_32
                enable_local_apic = -1;
+#else
+               disable_apic = 1;
+#endif
 #endif
                clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
        }
 
        finish_e820_parsing();
 
+#ifdef CONFIG_X86_32
        probe_roms();
+#else
+# ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+       if (init_ohci1394_dma_early)
+               init_ohci1394_dma_on_all_controllers();
+# endif
+#endif
 
        /* after parse_early_param, so could debug it */
        insert_resource(&iomem_resource, &code_resource);
@@ -452,6 +487,7 @@ void __init setup_arch(char **cmdline_p)
        if (efi_enabled)
                efi_init();
 
+#ifdef CONFIG_X86_32
        if (ppro_with_ram_bug()) {
                e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,
                                  E820_RESERVED);
@@ -459,6 +495,9 @@ void __init setup_arch(char **cmdline_p)
                printk(KERN_INFO "fixed physical RAM map:\n");
                e820_print_map("bad_ppro");
        }
+#else
+       early_gart_iommu_check();
+#endif
 
        e820_register_active_regions(0, 0, -1UL);
        /*
@@ -477,14 +516,32 @@ void __init setup_arch(char **cmdline_p)
                max_pfn = e820_end_of_ram();
        }
 
+#ifdef CONFIG_X86_32
        /* max_low_pfn get updated here */
        find_low_pfn_range();
+#else
+       num_physpages = max_pfn;
+
+       check_efer();
+
+       /* How many end-of-memory variables you have, grandma! */
+       /* need this before calling reserve_initrd */
+       max_low_pfn = max_pfn;
+       high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
+#endif
 
        /* max_pfn_mapped is updated here */
+#ifdef CONFIG_X86_64
+       max_pfn_mapped =
+#endif
        max_pfn_mapped = init_memory_mapping(0, (max_low_pfn << PAGE_SHIFT));
 
        reserve_initrd();
 
+#ifdef CONFIG_X86_64
+       vsmp_init();
+#endif
+
        dmi_scan_machine();
 
        io_delay_init();
@@ -494,6 +551,11 @@ void __init setup_arch(char **cmdline_p)
         */
        acpi_boot_table_init();
 
+#ifdef CONFIG_X86_64
+       /* Remove active ranges so rediscovery with NUMA-awareness happens */
+       remove_all_active_ranges();
+#endif
+
 #ifdef CONFIG_ACPI_NUMA
         /*
          * Parse SRAT to discover nodes.
@@ -503,13 +565,18 @@ void __init setup_arch(char **cmdline_p)
 
        initmem_init(0, max_pfn);
 
+#ifdef CONFIG_X86_64
+       dma32_reserve_bootmem();
+#endif
+
 #ifdef CONFIG_ACPI_SLEEP
        /*
         * Reserve low memory region for sleep support.
         */
        acpi_reserve_bootmem();
 #endif
-#ifdef CONFIG_X86_FIND_SMP_CONFIG
+#if defined(CONFIG_X86_FIND_SMP_CONFIG) && defined(CONFIG_X86_32) || \
+    defined(CONFIG_X86_MPPARSE) && defined(CONFIG_X86_64)
        /*
         * Find and reserve possible boot-time SMP configuration:
         */
@@ -523,7 +590,7 @@ void __init setup_arch(char **cmdline_p)
        kvmclock_init();
 #endif
 
-#ifdef CONFIG_VMI
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
        /*
         * Must be after max_low_pfn is determined, and before kernel
         * pagetables are setup.
@@ -533,11 +600,15 @@ void __init setup_arch(char **cmdline_p)
 
        paging_init();
 
+#ifdef CONFIG_X86_64
+       map_vsyscall();
+#endif
+
        /*
         * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
         */
 
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+#if defined(CONFIG_PROVIDE_OHCI1394_DMA_INIT) && defined(CONFIG_X86_32)
        if (init_ohci1394_dma_early)
                init_ohci1394_dma_on_all_controllers();
 #endif
@@ -553,6 +624,10 @@ void __init setup_arch(char **cmdline_p)
         */
        acpi_boot_init();
 
+#ifdef CONFIG_X86_64
+       init_cpu_to_node();
+#endif
+
 #if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
        /*
         * get boot-time SMP configuration:
@@ -560,18 +635,26 @@ void __init setup_arch(char **cmdline_p)
        if (smp_found_config)
                get_smp_config();
 #endif
-#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
+
+#ifdef CONFIG_X86_64
+       init_apic_mappings();
+       ioapic_init_mappings();
+#else
+# if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
        if (def_to_bigsmp)
                printk(KERN_WARNING "More than 8 CPUs detected and "
                        "CONFIG_X86_PC cannot handle it.\nUse "
                        "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
+# endif
 #endif
        kvm_guest_init();
 
        e820_reserve_resources();
        e820_mark_nosave_regions(max_low_pfn);
 
+#ifdef CONFIG_X86_32
        request_resource(&iomem_resource, &video_ram_resource);
+#endif
        reserve_standard_io_resources();
 
        e820_setup_gap();