V4L/DVB (11463): gspca - m5602-po1030: Remove unneeded init sequences

po1030: There's a lot of redundant writes to the bridge and sensor.
Remove them.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.h b/drivers/media/video/gspca/m5602/m5602_po1030.h
index 451d206..9ccf89e 100644 (file)
--- a/drivers/media/video/gspca/m5602/m5602_po1030.h
+++ b/drivers/media/video/gspca/m5602/m5602_po1030.h
@@ -254,42 +254,6 @@ static const unsigned char init_po1030[][3] =
        {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
        /*end of sequence 1*/
 
-       /*sequence 2 (same as stop sequence)*/
-       {SENSOR, PO1030_AUTOCTRL2, 0x24},
-       {BRIDGE, M5602_XB_GPIO_DIR, 0x05},
-       {BRIDGE, M5602_XB_GPIO_DAT, 0x04},
-       {BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
-       {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
-       {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
-
-       {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
-       {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-       /*end of sequence 2*/
-
-       /*sequence 5*/
-       {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
-       {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-       {BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-       {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-       {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
-       {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
-       {BRIDGE, M5602_XB_SIG_INI, 0x01},
-       {BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-       {BRIDGE, M5602_XB_VSYNC_PARA, 0x02},
-       {BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-       {BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-       {BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
-       {BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
-       {BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-       {BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-       {BRIDGE, M5602_XB_SIG_INI, 0x00},
-       {BRIDGE, M5602_XB_SIG_INI, 0x02},
-       {BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-       {BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-       {BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
-       {BRIDGE, M5602_XB_HSYNC_PARA, 0x87},
-       {BRIDGE, M5602_XB_SIG_INI, 0x00},
-       /*end of sequence 5*/
        /*sequence 2 stop */
        {SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
 
@@ -305,15 +269,6 @@ static const unsigned char init_po1030[][3] =
 
 static const unsigned char start_po1030[][3] =
 {
-       /* ---------------------------------
-        * end of init - begin of start
-        * --------------------------------- */
-       /*sequence 3*/
-       {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
-       {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-       {BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-       {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-       /*end of sequence 3*/
        /*sequence 4*/
        {BRIDGE, M5602_XB_GPIO_DIR, 0x05},
        {BRIDGE, M5602_XB_GPIO_DAT, 0x00},
@@ -358,8 +313,6 @@ static const unsigned char start_po1030[][3] =
        {SENSOR, PO1030_EGA, 0x80},
        {SENSOR, 0x78, 0x14},
        {SENSOR, 0x6f, 0x01},
-       {SENSOR, PO1030_CONTROL1, PO1030_AUTO_SUBSAMPLING |
-                                 PO1030_FRAME_EQUAL},
        {SENSOR, PO1030_GLOBALGAINMAX, 0x14},
        {SENSOR, PO1030_Cb_U_GAIN, 0x38},
        {SENSOR, PO1030_Cr_V_GAIN, 0x38},
@@ -408,11 +361,6 @@ static const unsigned char start_po1030[][3] =
         * decrease the FPS (Frame Per Second) */
        {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
        {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-
-       /* Sets the width */
-       {SENSOR, PO1030_FRAMEWIDTH_H, 0x02},
-       {SENSOR, PO1030_FRAMEWIDTH_L, 0xef}
-       /*end of sequence 6*/
 };
 
 #endif