x86, documentation: kernel-parameters replace X86-32,X86-64 with X86

X86 is same as X86-32+X86-64 so replace X86-32,X86-64 with X86.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1239698023.3033.37.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6172e43..a19f021 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
 
-       acpi=           [HW,ACPI,X86-64,i386]
+       acpi=           [HW,ACPI,X86]
                        Advanced Configuration and Power Interface
                        Format: { force | off | ht | strict | noirq | rsdt }
                        force -- enable ACPI if default was off
@@ -218,7 +218,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        acpi_osi="!string2"     # remove built-in string2
                        acpi_osi=               # disable all strings
 
-       acpi_pm_good    [X86-32,X86-64]
+       acpi_pm_good    [X86]
                        Override the pmtimer bug detection: force the kernel
                        to assume that this machine's pmtimer latches its value
                        and always returns good values.
@@ -459,7 +459,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        Also note the kernel might malfunction if you disable
                        some critical bits.
 
-       code_bytes      [IA32/X86_64] How many bytes of object code to print
+       code_bytes      [X86] How many bytes of object code to print
                        in an oops report.
                        Range: 0 - 8192
                        Default: 64
@@ -592,7 +592,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        MTRR settings.  This parameter disables that behavior,
                        possibly causing your machine to run very slowly.
 
-       disable_timer_pin_1 [i386,x86-64]
+       disable_timer_pin_1 [X86]
                        Disable PIN 1 of APIC timer
                        Can be useful to work around chipset bugs.
 
@@ -624,7 +624,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        UART at the specified I/O port or MMIO address.
                        The options are the same as for ttyS, above.
 
-       earlyprintk=    [X86-32,X86-64,SH,BLACKFIN]
+       earlyprintk=    [X86,SH,BLACKFIN]
                        earlyprintk=vga
                        earlyprintk=serial[,ttySn[,baudrate]]
                        earlyprintk=dbgp
@@ -659,7 +659,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        See Documentation/block/as-iosched.txt and
                        Documentation/block/deadline-iosched.txt for details.
 
-       elfcorehdr=     [IA64,PPC,SH,X86-32,X86_64]
+       elfcorehdr=     [IA64,PPC,SH,X86]
                        Specifies physical address of start of kernel core
                        image elf header. Generally kexec loader will
                        pass this option to capture kernel.
@@ -938,7 +938,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        See comment before marvel_specify_io7 in
                        arch/alpha/kernel/core_marvel.c.
 
-       io_delay=       [X86-32,X86-64] I/O delay method
+       io_delay=       [X86] I/O delay method
                0x80
                        Standard port 0x80 based delay
                0xed
@@ -1000,7 +1000,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
        keepinitrd      [HW,ARM]
 
-       kernelcore=nn[KMG]      [KNL,X86-32,IA-64,PPC,X86-64] This parameter
+       kernelcore=nn[KMG]      [KNL,X86,IA-64,PPC] This parameter
                        specifies the amount of memory usable by the kernel
                        for non-movable allocations.  The requested amount is
                        spread evenly throughout all nodes in the system. The
@@ -1034,7 +1034,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        Configure the RouterBoard 532 series on-chip
                        Ethernet adapter MAC address.
 
-       kstack=N        [X86-32,X86-64] Print N words from the kernel stack
+       kstack=N        [X86] Print N words from the kernel stack
                        in oops dumps.
 
        l2cr=           [PPC]
@@ -1044,7 +1044,7 @@ and is between 256 and 4096 characters. It is defined in the file
        lapic           [X86-32,APIC] Enable the local APIC even if BIOS
                        disabled it.
 
-       lapic_timer_c2_ok       [X86-32,x86-64,APIC] trust the local apic timer
+       lapic_timer_c2_ok       [X86,APIC] trust the local apic timer
                        in C2 power state.
 
        libata.dma=     [LIBATA] DMA control
@@ -1229,7 +1229,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        [KNL,SH] Allow user to override the default size for
                        per-device physically contiguous DMA buffers.
 
-       memmap=exactmap [KNL,X86-32,X86_64] Enable setting of an exact
+       memmap=exactmap [KNL,X86] Enable setting of an exact
                        E820 memory map, as specified by the user.
                        Such memmap=exactmap lines can be constructed based on
                        BIOS output or other requirements. See the memmap=nn@ss
@@ -1320,7 +1320,7 @@ and is between 256 and 4096 characters. It is defined in the file
        mousedev.yres=  [MOUSE] Vertical screen resolution, used for devices
                        reporting absolute coordinates, such as tablets
 
-       movablecore=nn[KMG]     [KNL,X86-32,IA-64,PPC,X86-64] This parameter
+       movablecore=nn[KMG]     [KNL,X86,IA-64,PPC] This parameter
                        is similar to kernelcore except it specifies the
                        amount of memory used for migratable allocations.
                        If both kernelcore and movablecore is specified,
@@ -1422,7 +1422,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        when a NMI is triggered.
                        Format: [state][,regs][,debounce][,die]
 
-       nmi_watchdog=   [KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+       nmi_watchdog=   [KNL,BUGS=X86] Debugging features for SMP kernels
                        Format: [panic,][num]
                        Valid num: 0,1,2
                        0 - turn nmi_watchdog off
@@ -1475,11 +1475,11 @@ and is between 256 and 4096 characters. It is defined in the file
 
        nodsp           [SH] Disable hardware DSP at boot time.
 
-       noefi           [X86-32,X86-64] Disable EFI runtime services support.
+       noefi           [X86] Disable EFI runtime services support.
 
        noexec          [IA-64]
 
-       noexec          [X86-32,X86-64]
+       noexec          [X86]
                        On X86-32 available only on PAE configured kernels.
                        noexec=on: enable non-executable mappings (default)
                        noexec=off: disable non-executable mappings
@@ -1525,7 +1525,7 @@ and is between 256 and 4096 characters. It is defined in the file
        noirqdebug      [X86-32] Disables the code which attempts to detect and
                        disable unhandled interrupt sources.
 
-       no_timer_check  [X86-32,X86_64,APIC] Disables the code which tests for
+       no_timer_check  [X86,APIC] Disables the code which tests for
                        broken timer IRQ sources.
 
        noisapnp        [ISAPNP] Disables ISA PnP code.
@@ -1689,7 +1689,7 @@ and is between 256 and 4096 characters. It is defined in the file
                                disable the use of PCIE advanced error reporting.
                nodomains       [PCI] Disable support for multiple PCI
                                root domains (aka PCI segments, in ACPI-speak).
-               nommconf        [X86-32,X86_64] Disable use of MMCONFIG for PCI
+               nommconf        [X86] Disable use of MMCONFIG for PCI
                                Configuration
                nomsi           [MSI] If the PCI_MSI kernel config parameter is
                                enabled, this kernel boot option can be used to
@@ -2380,7 +2380,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        reported either.
 
        unknown_nmi_panic
-                       [X86-32,X86-64]
+                       [X86]
                        Set unknown_nmi_panic=1 early on boot.
 
        usbcore.autosuspend=
@@ -2447,12 +2447,12 @@ and is between 256 and 4096 characters. It is defined in the file
                                        medium is write-protected).
                        Example: quirks=0419:aaf5:rl,0421:0433:rc
 
-       vdso=           [X86-32,SH,x86-64]
+       vdso=           [X86,SH]
                        vdso=2: enable compat VDSO (default with COMPAT_VDSO)
                        vdso=1: enable VDSO (default)
                        vdso=0: disable VDSO mapping
 
-       vdso32=         [X86-32,X86-64]
+       vdso32=         [X86]
                        vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
                        vdso32=1: enable 32-bit VDSO (default)
                        vdso32=0: disable 32-bit VDSO mapping