DRM_DEBUG_KMS("FDI train done.\n");
}
-static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
+static void ironlake_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
temp = I915_READ(pipeconf_reg);
pipe_bpc = temp & PIPE_BPC_MASK;
- /* XXX: When our outputs are all unaware of DPMS modes other than off
- * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
- */
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- temp = I915_READ(PCH_LVDS);
- if ((temp & LVDS_PORT_EN) == 0) {
- I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
- POSTING_READ(PCH_LVDS);
- }
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ temp = I915_READ(PCH_LVDS);
+ if ((temp & LVDS_PORT_EN) == 0) {
+ I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
+ POSTING_READ(PCH_LVDS);
}
+ }
- if (!HAS_eDP) {
-
- /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
- temp = I915_READ(fdi_rx_reg);
- /*
- * make the BPC in FDI Rx be consistent with that in
- * pipeconf reg.
- */
- temp &= ~(0x7 << 16);
- temp |= (pipe_bpc << 11);
- temp &= ~(7 << 19);
- temp |= (intel_crtc->fdi_lanes - 1) << 19;
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
- I915_READ(fdi_rx_reg);
- udelay(200);
+ if (!HAS_eDP) {
+ /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+ temp = I915_READ(fdi_rx_reg);
+ /*
+ * make the BPC in FDI Rx be consistent with that in
+ * pipeconf reg.
+ */
+ temp &= ~(0x7 << 16);
+ temp |= (pipe_bpc << 11);
+ temp &= ~(7 << 19);
+ temp |= (intel_crtc->fdi_lanes - 1) << 19;
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
+ I915_READ(fdi_rx_reg);
+ udelay(200);
- /* Switch from Rawclk to PCDclk */
- temp = I915_READ(fdi_rx_reg);
- I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK);
- I915_READ(fdi_rx_reg);
- udelay(200);
+ /* Switch from Rawclk to PCDclk */
+ temp = I915_READ(fdi_rx_reg);
+ I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK);
+ I915_READ(fdi_rx_reg);
+ udelay(200);
- /* Enable CPU FDI TX PLL, always on for Ironlake */
- temp = I915_READ(fdi_tx_reg);
- if ((temp & FDI_TX_PLL_ENABLE) == 0) {
- I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
- I915_READ(fdi_tx_reg);
- udelay(100);
- }
+ /* Enable CPU FDI TX PLL, always on for Ironlake */
+ temp = I915_READ(fdi_tx_reg);
+ if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+ I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
+ I915_READ(fdi_tx_reg);
+ udelay(100);
}
+ }
- /* Enable panel fitting for LVDS */
- if (dev_priv->pch_pf_size &&
- (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
- || HAS_eDP || intel_pch_has_edp(crtc))) {
- /* Force use of hard-coded filter coefficients
- * as some pre-programmed values are broken,
- * e.g. x201.
- */
- I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1,
- PF_ENABLE | PF_FILTER_MED_3x3);
- I915_WRITE(pipe ? PFB_WIN_POS : PFA_WIN_POS,
- dev_priv->pch_pf_pos);
- I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ,
- dev_priv->pch_pf_size);
- }
+ /* Enable panel fitting for LVDS */
+ if (dev_priv->pch_pf_size &&
+ (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
+ || HAS_eDP || intel_pch_has_edp(crtc))) {
+ /* Force use of hard-coded filter coefficients
+ * as some pre-programmed values are broken,
+ * e.g. x201.
+ */
+ I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1,
+ PF_ENABLE | PF_FILTER_MED_3x3);
+ I915_WRITE(pipe ? PFB_WIN_POS : PFA_WIN_POS,
+ dev_priv->pch_pf_pos);
+ I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ,
+ dev_priv->pch_pf_size);
+ }
- /* Enable CPU pipe */
- temp = I915_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) == 0) {
- I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
- I915_READ(pipeconf_reg);
- udelay(100);
- }
+ /* Enable CPU pipe */
+ temp = I915_READ(pipeconf_reg);
+ if ((temp & PIPEACONF_ENABLE) == 0) {
+ I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+ I915_READ(pipeconf_reg);
+ udelay(100);
+ }
- /* configure and enable CPU plane */
- temp = I915_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
- I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
- }
+ /* configure and enable CPU plane */
+ temp = I915_READ(dspcntr_reg);
+ if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+ I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+ }
- if (!HAS_eDP) {
- /* For PCH output, training FDI link */
- if (IS_GEN6(dev))
- gen6_fdi_link_train(crtc);
- else
- ironlake_fdi_link_train(crtc);
+ if (!HAS_eDP) {
+ /* For PCH output, training FDI link */
+ if (IS_GEN6(dev))
+ gen6_fdi_link_train(crtc);
+ else
+ ironlake_fdi_link_train(crtc);
- /* enable PCH DPLL */
- temp = I915_READ(pch_dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) == 0) {
- I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
- I915_READ(pch_dpll_reg);
- }
- udelay(200);
+ /* enable PCH DPLL */
+ temp = I915_READ(pch_dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
+ I915_READ(pch_dpll_reg);
+ }
+ udelay(200);
- if (HAS_PCH_CPT(dev)) {
- /* Be sure PCH DPLL SEL is set */
- temp = I915_READ(PCH_DPLL_SEL);
- if (trans_dpll_sel == 0 &&
- (temp & TRANSA_DPLL_ENABLE) == 0)
- temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
- else if (trans_dpll_sel == 1 &&
- (temp & TRANSB_DPLL_ENABLE) == 0)
- temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
- I915_WRITE(PCH_DPLL_SEL, temp);
- I915_READ(PCH_DPLL_SEL);
- }
+ if (HAS_PCH_CPT(dev)) {
+ /* Be sure PCH DPLL SEL is set */
+ temp = I915_READ(PCH_DPLL_SEL);
+ if (trans_dpll_sel == 0 &&
+ (temp & TRANSA_DPLL_ENABLE) == 0)
+ temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
+ else if (trans_dpll_sel == 1 &&
+ (temp & TRANSB_DPLL_ENABLE) == 0)
+ temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
+ I915_WRITE(PCH_DPLL_SEL, temp);
+ I915_READ(PCH_DPLL_SEL);
+ }
+ /* set transcoder timing */
+ I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
+ I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
+ I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
- /* set transcoder timing */
- I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
- I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
- I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
+ I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
+ I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
+ I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
- I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
- I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
- I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
+ /* enable normal train */
+ temp = I915_READ(fdi_tx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
+ FDI_TX_ENHANCE_FRAME_ENABLE);
+ I915_READ(fdi_tx_reg);
- /* enable normal train */
- temp = I915_READ(fdi_tx_reg);
+ temp = I915_READ(fdi_rx_reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_NORMAL_CPT;
+ } else {
temp &= ~FDI_LINK_TRAIN_NONE;
- I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
- FDI_TX_ENHANCE_FRAME_ENABLE);
- I915_READ(fdi_tx_reg);
+ temp |= FDI_LINK_TRAIN_NONE;
+ }
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
+ I915_READ(fdi_rx_reg);
- temp = I915_READ(fdi_rx_reg);
- if (HAS_PCH_CPT(dev)) {
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_NORMAL_CPT;
- } else {
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_NONE;
+ /* wait one idle pattern time */
+ udelay(100);
+
+ /* For PCH DP, enable TRANS_DP_CTL */
+ if (HAS_PCH_CPT(dev) &&
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
+ int reg;
+
+ reg = I915_READ(trans_dp_ctl);
+ reg &= ~(TRANS_DP_PORT_SEL_MASK |
+ TRANS_DP_SYNC_MASK);
+ reg |= (TRANS_DP_OUTPUT_ENABLE |
+ TRANS_DP_ENH_FRAMING);
+
+ if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
+ reg |= TRANS_DP_HSYNC_ACTIVE_HIGH;
+ if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
+ reg |= TRANS_DP_VSYNC_ACTIVE_HIGH;
+
+ switch (intel_trans_dp_port_sel(crtc)) {
+ case PCH_DP_B:
+ reg |= TRANS_DP_PORT_SEL_B;
+ break;
+ case PCH_DP_C:
+ reg |= TRANS_DP_PORT_SEL_C;
+ break;
+ case PCH_DP_D:
+ reg |= TRANS_DP_PORT_SEL_D;
+ break;
+ default:
+ DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
+ reg |= TRANS_DP_PORT_SEL_B;
+ break;
}
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
- I915_READ(fdi_rx_reg);
- /* wait one idle pattern time */
- udelay(100);
+ I915_WRITE(trans_dp_ctl, reg);
+ POSTING_READ(trans_dp_ctl);
+ }
- /* For PCH DP, enable TRANS_DP_CTL */
- if (HAS_PCH_CPT(dev) &&
- intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
- int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
- int reg;
-
- reg = I915_READ(trans_dp_ctl);
- reg &= ~(TRANS_DP_PORT_SEL_MASK |
- TRANS_DP_SYNC_MASK);
- reg |= (TRANS_DP_OUTPUT_ENABLE |
- TRANS_DP_ENH_FRAMING);
-
- if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
- reg |= TRANS_DP_HSYNC_ACTIVE_HIGH;
- if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
- reg |= TRANS_DP_VSYNC_ACTIVE_HIGH;
-
- switch (intel_trans_dp_port_sel(crtc)) {
- case PCH_DP_B:
- reg |= TRANS_DP_PORT_SEL_B;
- break;
- case PCH_DP_C:
- reg |= TRANS_DP_PORT_SEL_C;
- break;
- case PCH_DP_D:
- reg |= TRANS_DP_PORT_SEL_D;
- break;
- default:
- DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
- reg |= TRANS_DP_PORT_SEL_B;
- break;
- }
+ /* enable PCH transcoder */
+ temp = I915_READ(transconf_reg);
+ /*
+ * make the BPC in transcoder be consistent with
+ * that in pipeconf reg.
+ */
+ temp &= ~PIPE_BPC_MASK;
+ temp |= pipe_bpc;
+ I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
+ I915_READ(transconf_reg);
- I915_WRITE(trans_dp_ctl, reg);
- POSTING_READ(trans_dp_ctl);
- }
+ if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 100))
+ DRM_ERROR("failed to enable transcoder\n");
+ }
- /* enable PCH transcoder */
- temp = I915_READ(transconf_reg);
- /*
- * make the BPC in transcoder be consistent with
- * that in pipeconf reg.
- */
- temp &= ~PIPE_BPC_MASK;
- temp |= pipe_bpc;
- I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
- I915_READ(transconf_reg);
+ intel_crtc_load_lut(crtc);
- if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 100))
- DRM_ERROR("failed to enable transcoder\n");
- }
+ intel_update_fbc(crtc, &crtc->mode);
+}
- intel_crtc_load_lut(crtc);
+static void ironlake_crtc_disable(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
+ int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
+ int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
+ int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
+ int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
+ int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
+ int trans_dpll_sel = (pipe == 0) ? 0 : 1;
+ u32 temp;
+ u32 pipe_bpc;
- intel_update_fbc(crtc, &crtc->mode);
- break;
+ temp = I915_READ(pipeconf_reg);
+ pipe_bpc = temp & PIPE_BPC_MASK;
- case DRM_MODE_DPMS_OFF:
- DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
+ drm_vblank_off(dev, pipe);
+ /* Disable display plane */
+ temp = I915_READ(dspcntr_reg);
+ if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+ I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+ I915_READ(dspbase_reg);
+ }
- drm_vblank_off(dev, pipe);
- /* Disable display plane */
- temp = I915_READ(dspcntr_reg);
- if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
- I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
- I915_READ(dspbase_reg);
- }
+ if (dev_priv->cfb_plane == plane &&
+ dev_priv->display.disable_fbc)
+ dev_priv->display.disable_fbc(dev);
- if (dev_priv->cfb_plane == plane &&
- dev_priv->display.disable_fbc)
- dev_priv->display.disable_fbc(dev);
+ /* disable cpu pipe, disable after all planes disabled */
+ temp = I915_READ(pipeconf_reg);
+ if ((temp & PIPEACONF_ENABLE) != 0) {
+ I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
- /* disable cpu pipe, disable after all planes disabled */
- temp = I915_READ(pipeconf_reg);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+ /* wait for cpu pipe off, pipe state */
+ if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50))
+ DRM_ERROR("failed to turn off cpu pipe\n");
+ } else
+ DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
- /* wait for cpu pipe off, pipe state */
- if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50))
- DRM_ERROR("failed to turn off cpu pipe\n");
- } else
- DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
+ udelay(100);
- udelay(100);
+ /* Disable PF */
+ I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, 0);
+ I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, 0);
- /* Disable PF */
- I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, 0);
- I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, 0);
+ /* disable CPU FDI tx and PCH FDI rx */
+ temp = I915_READ(fdi_tx_reg);
+ I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
+ I915_READ(fdi_tx_reg);
- /* disable CPU FDI tx and PCH FDI rx */
- temp = I915_READ(fdi_tx_reg);
- I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
- I915_READ(fdi_tx_reg);
+ temp = I915_READ(fdi_rx_reg);
+ /* BPC in FDI rx is consistent with that in pipeconf */
+ temp &= ~(0x07 << 16);
+ temp |= (pipe_bpc << 11);
+ I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
+ I915_READ(fdi_rx_reg);
- temp = I915_READ(fdi_rx_reg);
- /* BPC in FDI rx is consistent with that in pipeconf */
- temp &= ~(0x07 << 16);
- temp |= (pipe_bpc << 11);
- I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
- I915_READ(fdi_rx_reg);
+ udelay(100);
- udelay(100);
+ /* still set train pattern 1 */
+ temp = I915_READ(fdi_tx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(fdi_tx_reg, temp);
+ POSTING_READ(fdi_tx_reg);
- /* still set train pattern 1 */
- temp = I915_READ(fdi_tx_reg);
+ temp = I915_READ(fdi_rx_reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ } else {
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(fdi_tx_reg, temp);
- POSTING_READ(fdi_tx_reg);
+ }
+ I915_WRITE(fdi_rx_reg, temp);
+ POSTING_READ(fdi_rx_reg);
- temp = I915_READ(fdi_rx_reg);
- if (HAS_PCH_CPT(dev)) {
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
- } else {
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- }
- I915_WRITE(fdi_rx_reg, temp);
- POSTING_READ(fdi_rx_reg);
+ udelay(100);
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ temp = I915_READ(PCH_LVDS);
+ I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN);
+ I915_READ(PCH_LVDS);
udelay(100);
+ }
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- temp = I915_READ(PCH_LVDS);
- I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN);
- I915_READ(PCH_LVDS);
- udelay(100);
- }
+ /* disable PCH transcoder */
+ temp = I915_READ(transconf_reg);
+ if ((temp & TRANS_ENABLE) != 0) {
+ I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
- /* disable PCH transcoder */
- temp = I915_READ(transconf_reg);
- if ((temp & TRANS_ENABLE) != 0) {
- I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
+ /* wait for PCH transcoder off, transcoder state */
+ if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50))
+ DRM_ERROR("failed to disable transcoder\n");
+ }
- /* wait for PCH transcoder off, transcoder state */
- if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50))
- DRM_ERROR("failed to disable transcoder\n");
- }
+ temp = I915_READ(transconf_reg);
+ /* BPC in transcoder is consistent with that in pipeconf */
+ temp &= ~PIPE_BPC_MASK;
+ temp |= pipe_bpc;
+ I915_WRITE(transconf_reg, temp);
+ I915_READ(transconf_reg);
+ udelay(100);
- temp = I915_READ(transconf_reg);
- /* BPC in transcoder is consistent with that in pipeconf */
- temp &= ~PIPE_BPC_MASK;
- temp |= pipe_bpc;
- I915_WRITE(transconf_reg, temp);
- I915_READ(transconf_reg);
- udelay(100);
+ if (HAS_PCH_CPT(dev)) {
+ /* disable TRANS_DP_CTL */
+ int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
+ int reg;
- if (HAS_PCH_CPT(dev)) {
- /* disable TRANS_DP_CTL */
- int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
- int reg;
+ reg = I915_READ(trans_dp_ctl);
+ reg &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
+ I915_WRITE(trans_dp_ctl, reg);
+ POSTING_READ(trans_dp_ctl);
- reg = I915_READ(trans_dp_ctl);
- reg &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
- I915_WRITE(trans_dp_ctl, reg);
- POSTING_READ(trans_dp_ctl);
+ /* disable DPLL_SEL */
+ temp = I915_READ(PCH_DPLL_SEL);
+ if (trans_dpll_sel == 0)
+ temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
+ else
+ temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
+ I915_WRITE(PCH_DPLL_SEL, temp);
+ I915_READ(PCH_DPLL_SEL);
- /* disable DPLL_SEL */
- temp = I915_READ(PCH_DPLL_SEL);
- if (trans_dpll_sel == 0)
- temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
- else
- temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
- I915_WRITE(PCH_DPLL_SEL, temp);
- I915_READ(PCH_DPLL_SEL);
+ }
- }
+ /* disable PCH DPLL */
+ temp = I915_READ(pch_dpll_reg);
+ I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
+ I915_READ(pch_dpll_reg);
- /* disable PCH DPLL */
- temp = I915_READ(pch_dpll_reg);
- I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
- I915_READ(pch_dpll_reg);
+ /* Switch from PCDclk to Rawclk */
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_SEL_PCDCLK;
+ I915_WRITE(fdi_rx_reg, temp);
+ I915_READ(fdi_rx_reg);
- /* Switch from PCDclk to Rawclk */
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_SEL_PCDCLK;
- I915_WRITE(fdi_rx_reg, temp);
- I915_READ(fdi_rx_reg);
+ /* Disable CPU FDI TX PLL */
+ temp = I915_READ(fdi_tx_reg);
+ I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
+ I915_READ(fdi_tx_reg);
+ udelay(100);
- /* Disable CPU FDI TX PLL */
- temp = I915_READ(fdi_tx_reg);
- I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
- I915_READ(fdi_tx_reg);
- udelay(100);
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_RX_PLL_ENABLE;
+ I915_WRITE(fdi_rx_reg, temp);
+ I915_READ(fdi_rx_reg);
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_RX_PLL_ENABLE;
- I915_WRITE(fdi_rx_reg, temp);
- I915_READ(fdi_rx_reg);
+ /* Wait for the clocks to turn off. */
+ udelay(100);
+}
- /* Wait for the clocks to turn off. */
- udelay(100);
+static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
+
+ /* XXX: When our outputs are all unaware of DPMS modes other than off
+ * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+ */
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
+ ironlake_crtc_enable(crtc);
+ break;
+
+ case DRM_MODE_DPMS_OFF:
+ DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
+ ironlake_crtc_disable(crtc);
break;
}
}
git.openpandora.org / pandora-kernel.git / commitdiff