bool
default n
+config ARCH_NO_VIRT_TO_BUS
+ def_bool y
+
source "init/Kconfig"
menu "System type"
config SH_DSP
bool "DSP support"
- default y if SH4AL_DSP || !CPU_SH4
- default n
+ depends on CPU_HAS_DSP
+ default y
help
Selecting this option will enable support for SH processors that
have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
config CPU_HAS_INTEVT
bool
-config CPU_HAS_PINT_IRQ
- bool
-
config CPU_HAS_MASKREG_IRQ
bool
config CPU_HAS_PTEA
bool
+config CPU_HAS_DSP
+ bool
+
endmenu
menu "Board support"
Select 7780 SolutionEngine if configuring for a Renesas SH7780
evaluation board.
-config SH_7300_SOLUTION_ENGINE
- bool "SolutionEngine7300"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7300
- help
- Select 7300 SolutionEngine if configuring for a Hitachi
- SH7300(SH-Mobile V) evaluation board.
-
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
Select 7343 SolutionEngine if configuring for a Hitachi
SH7343 (SH-Mobile 3AS) evaluation board.
-config SH_73180_SOLUTION_ENGINE
- bool "SolutionEngine73180"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH73180
- help
- Select 73180 SolutionEngine if configuring for a Hitachi
- SH73180(SH-Mobile 3) evaluation board.
-
config SH_7751_SYSTEMH
bool "SystemH7751R"
depends on CPU_SUBTYPE_SH7751R
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
- default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
+ default "27000000" if CPU_SUBTYPE_SH7343
default "31250000" if CPU_SUBTYPE_SH7619
default "32000000" if CPU_SUBTYPE_SH7722
- default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
+ default "33333333" if CPU_SUBTYPE_SH7770 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7206
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722
machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751
machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780
-machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) += se/7300
machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
-machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) += se/73180
machdir-$(CONFIG_SH_HP6XX) += hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
machdir-$(CONFIG_SH_MPC1211) += mpc1211
+++ /dev/null
-#
-# Makefile for the 7300 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
+++ /dev/null
-/*
- * arch/sh/boards/se/7300/io.c
- *
- * Copyright (C) 2003 YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/kernel/io_shmse.c
- *
- * I/O routine for SH-Mobile3 73180 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <asm/se7300.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
- unsigned long start, end;
- unsigned long base;
- struct iop *(*check) (struct iop * p, unsigned long port);
- unsigned char (*inb) (struct iop * p, unsigned long port);
- unsigned short (*inw) (struct iop * p, unsigned long port);
- void (*outb) (struct iop * p, unsigned char value, unsigned long port);
- void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
- if ((p->start <= port) && (port <= p->end))
- return p;
- else
- badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
- if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
- return p;
- return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
- return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
- return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- *(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
- *(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
- unsigned long v;
-
- if (port & 1)
- addr += 0x00400000;
- v = *(volatile unsigned char *) addr;
- return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
-
- if (port & 1)
- addr += 0x00400000;
- *(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
- badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
- .start = 0x300,
- .end = 0x30f,
- .base = 0xb4000000,
- .check = simple_check,
- .inb = simple_inb,
- .inw = simple_inw,
- .outb = simple_outb,
- .outw = simple_outw,
-};
-#endif
-
-/* NE2000 pc card NIC */
-static struct iop neiop = {
- .start = 0x280,
- .end = 0x29f,
- .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */
- .check = simple_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
- .base = 0xb0600000,
- .check = ide_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
- if (0) ;
-#if defined(CONFIG_SMC91X)
- else if (laniop.check(&laniop, port))
- return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
- else if (neiop.check(&neiop, port))
- return &neiop;
-#endif
-#if defined(CONFIG_IDE)
- else if (cfiop.check(&cfiop, port))
- return &cfiop;
-#endif
- else
- return &neiop; /* fallback */
-}
-
-static inline void
-delay(void)
-{
- ctrl_inw(0xac000000);
- ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh7300se_inb(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inb) (p, port);
-}
-
-unsigned char
-sh7300se_inb_p(unsigned long port)
-{
- unsigned char v = sh7300se_inb(port);
- delay();
- return v;
-}
-
-unsigned short
-sh7300se_inw(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inw) (p, port);
-}
-
-unsigned int
-sh7300se_inl(unsigned long port)
-{
- badio(inl, port);
-}
-
-void
-sh7300se_outb(unsigned char value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outb) (p, value, port);
-}
-
-void
-sh7300se_outb_p(unsigned char value, unsigned long port)
-{
- sh7300se_outb(value, port);
- delay();
-}
-
-void
-sh7300se_outw(unsigned short value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outw) (p, value, port);
-}
-
-void
-sh7300se_outl(unsigned int value, unsigned long port)
-{
- badio(outl, port);
-}
-
-void
-sh7300se_insb(unsigned long port, void *addr, unsigned long count)
-{
- unsigned char *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inb) (p, port);
-}
-
-void
-sh7300se_insw(unsigned long port, void *addr, unsigned long count)
-{
- unsigned short *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inw) (p, port);
-}
-
-void
-sh7300se_insl(unsigned long port, void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void
-sh7300se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned char *a = (unsigned char *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outb) (p, *a++, port);
-}
-
-void
-sh7300se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned short *a = (unsigned short *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outw) (p, *a++, port);
-}
-
-void
-sh7300se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- badio(outsw, port);
-}
+++ /dev/null
-/*
- * linux/arch/sh/boards/se/7300/irq.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7300 Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7300.h>
-
-static struct ipr_data se7300_ipr_map[] = {
- /* PC_IRQ[0-3] -> IRQ0 (32) */
- { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ },
- /* A_IRQ[0-3] -> IRQ1 (33) */
- { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ },
- { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
- { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
- { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
- { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init
-init_7300se_IRQ(void)
-{
- ctrl_outw(0x0028, PA_EPLD_MODESET); /* mode set IRQ0,1 active low. */
- ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */
- ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */
-
- make_ipr_irq(se7300_ipr_map, ARRAY_SIZE(se7300_ipr_map));
-
- ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */
-}
+++ /dev/null
-/*
- * linux/arch/sh/boards/se/7300/setup.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7300 Support.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7300.h>
-
-void init_7300se_IRQ(void);
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = heartbeat_bit_pos,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *se7300_devices[] __initdata = {
- &heartbeat_device,
-};
-
-static int __init se7300_devices_setup(void)
-{
- return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices));
-}
-__initcall(se7300_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7300se __initmv = {
- .mv_name = "SolutionEngine 7300",
- .mv_nr_irqs = 109,
- .mv_inb = sh7300se_inb,
- .mv_inw = sh7300se_inw,
- .mv_inl = sh7300se_inl,
- .mv_outb = sh7300se_outb,
- .mv_outw = sh7300se_outw,
- .mv_outl = sh7300se_outl,
-
- .mv_inb_p = sh7300se_inb_p,
- .mv_inw_p = sh7300se_inw,
- .mv_inl_p = sh7300se_inl,
- .mv_outb_p = sh7300se_outb_p,
- .mv_outw_p = sh7300se_outw,
- .mv_outl_p = sh7300se_outl,
-
- .mv_insb = sh7300se_insb,
- .mv_insw = sh7300se_insw,
- .mv_insl = sh7300se_insl,
- .mv_outsb = sh7300se_outsb,
- .mv_outsw = sh7300se_outsw,
- .mv_outsl = sh7300se_outsl,
-
- .mv_init_irq = init_7300se_IRQ,
-};
+++ /dev/null
-#
-# Makefile for the 73180 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
+++ /dev/null
-/*
- * arch/sh/boards/se/73180/io.c
- *
- * Copyright (C) 2003 YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/boards/se/7300/io.c
- *
- * I/O routine for SH-Mobile3 73180 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <asm/mach/se73180.h>
-#include <asm/io.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
- unsigned long start, end;
- unsigned long base;
- struct iop *(*check) (struct iop * p, unsigned long port);
- unsigned char (*inb) (struct iop * p, unsigned long port);
- unsigned short (*inw) (struct iop * p, unsigned long port);
- void (*outb) (struct iop * p, unsigned char value, unsigned long port);
- void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
- if ((p->start <= port) && (port <= p->end))
- return p;
- else
- badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
- if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
- return p;
- return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
- return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
- return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- *(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
- *(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
- unsigned long v;
-
- if (port & 1)
- addr += 0x00400000;
- v = *(volatile unsigned char *) addr;
- return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
-
- if (port & 1)
- addr += 0x00400000;
- *(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
- badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
- .start = 0x300,
- .end = 0x30f,
- .base = 0xb4000000,
- .check = simple_check,
- .inb = simple_inb,
- .inw = simple_inw,
- .outb = simple_outb,
- .outw = simple_outw,
-};
-#endif
-
-/* NE2000 pc card NIC */
-static struct iop neiop = {
- .start = 0x280,
- .end = 0x29f,
- .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */
- .check = simple_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
- .base = 0xb0600000,
- .check = ide_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
- if (0) ;
-#if defined(CONFIG_SMC91X)
- else if (laniop.check(&laniop, port))
- return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
- else if (neiop.check(&neiop, port))
- return &neiop;
-#endif
-#if defined(CONFIG_IDE)
- else if (cfiop.check(&cfiop, port))
- return &cfiop;
-#endif
- else
- return &neiop; /* fallback */
-}
-
-static inline void
-delay(void)
-{
- ctrl_inw(0xac000000);
- ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh73180se_inb(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inb) (p, port);
-}
-
-unsigned char
-sh73180se_inb_p(unsigned long port)
-{
- unsigned char v = sh73180se_inb(port);
- delay();
- return v;
-}
-
-unsigned short
-sh73180se_inw(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inw) (p, port);
-}
-
-unsigned int
-sh73180se_inl(unsigned long port)
-{
- badio(inl, port);
-}
-
-void
-sh73180se_outb(unsigned char value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outb) (p, value, port);
-}
-
-void
-sh73180se_outb_p(unsigned char value, unsigned long port)
-{
- sh73180se_outb(value, port);
- delay();
-}
-
-void
-sh73180se_outw(unsigned short value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outw) (p, value, port);
-}
-
-void
-sh73180se_outl(unsigned int value, unsigned long port)
-{
- badio(outl, port);
-}
-
-void
-sh73180se_insb(unsigned long port, void *addr, unsigned long count)
-{
- unsigned char *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inb) (p, port);
-}
-
-void
-sh73180se_insw(unsigned long port, void *addr, unsigned long count)
-{
- unsigned short *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inw) (p, port);
-}
-
-void
-sh73180se_insl(unsigned long port, void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void
-sh73180se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned char *a = (unsigned char *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outb) (p, *a++, port);
-}
-
-void
-sh73180se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned short *a = (unsigned short *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outw) (p, *a++, port);
-}
-
-void
-sh73180se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- badio(outsw, port);
-}
+++ /dev/null
-/*
- * arch/sh/boards/se/73180/irq.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/boards/se/7300/irq.c
- *
- * Modified for SH-Mobile SolutionEngine 73180 Support
- * by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/mach/se73180.h>
-
-static int
-irq2intreq(int irq)
-{
- if (irq == 10)
- return 5;
- return 7 - (irq - 32);
-}
-
-static void
-disable_intreq_irq(unsigned int irq)
-{
- ctrl_outb(1 << (7 - irq2intreq(irq)), INTMSK0);
-}
-
-static void
-enable_intreq_irq(unsigned int irq)
-{
- ctrl_outb(1 << (7 - irq2intreq(irq)), INTMSKCLR0);
-}
-
-static void
-mask_and_ack_intreq_irq(unsigned int irq)
-{
- disable_intreq_irq(irq);
-}
-
-static unsigned int
-startup_intreq_irq(unsigned int irq)
-{
- enable_intreq_irq(irq);
- return 0;
-}
-
-static void
-shutdown_intreq_irq(unsigned int irq)
-{
- disable_intreq_irq(irq);
-}
-
-static void
-end_intreq_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_intreq_irq(irq);
-}
-
-static struct hw_interrupt_type intreq_irq_type = {
- .typename = "intreq",
- .startup = startup_intreq_irq,
- .shutdown = shutdown_intreq_irq,
- .enable = enable_intreq_irq,
- .disable = disable_intreq_irq,
- .ack = mask_and_ack_intreq_irq,
- .end = end_intreq_irq
-};
-
-void
-make_intreq_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].chip = &intreq_irq_type;
- disable_intreq_irq(irq);
-}
-
-int
-shmse_irq_demux(int irq)
-{
- if (irq == IRQ5_IRQ)
- return 10;
- return irq;
-}
-
-static struct ipr_data se73180_siof0_ipr_map[] = {
- { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-};
-static struct ipr_data se73180_vpu_ipr_map[] = {
- { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
-};
-static struct ipr_data se73180_other_ipr_map[] = {
- { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
- { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
- { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
- { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
- { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
- { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
- { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
- { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
- { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
-
- /* VIO interrupt */
- { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
- { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
- { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-
- { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init
-init_73180se_IRQ(void)
-{
- make_ipr_irq(se73180_siof0_ipr_map, ARRAY_SIZE(se73180_siof0_ipr_map));
-
- ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
- ctrl_outw(0x2000, 0xb07fffec); /* mrshpc irq enable */
- ctrl_outl(3 << ((7 - 5) * 4), INTC_INTPRI0); /* irq5 pri=3 */
- ctrl_outw(2 << ((7 - 5) * 2), INTC_ICR1); /* low-level irq */
- make_intreq_irq(10);
-
- make_ipr_irq(se73180_vpu_ipr_map, ARRAY_SIZE(se73180_vpu_ipr_map));
-
- ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */
-
- make_ipr_irq(se73180_other_ipr_map, ARRAY_SIZE(se73180_other_ipr_map));
-
- ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */
-}
+++ /dev/null
-/*
- * arch/sh/boards/se/73180/setup.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/setup_shmse.c
- *
- * Modified for 73180 SolutionEngine
- * by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se73180.h>
-#include <asm/irq.h>
-
-void init_73180se_IRQ(void);
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED + 8 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *se73180_devices[] __initdata = {
- &heartbeat_device,
-};
-
-static int __init se73180_devices_setup(void)
-{
- return platform_add_devices(se73180_devices,
- ARRAY_SIZE(se73180_devices));
-}
-__initcall(se73180_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_73180se __initmv = {
- .mv_name = "SolutionEngine 73180",
- .mv_nr_irqs = 108,
- .mv_inb = sh73180se_inb,
- .mv_inw = sh73180se_inw,
- .mv_inl = sh73180se_inl,
- .mv_outb = sh73180se_outb,
- .mv_outw = sh73180se_outw,
- .mv_outl = sh73180se_outl,
-
- .mv_inb_p = sh73180se_inb_p,
- .mv_inw_p = sh73180se_inw,
- .mv_inl_p = sh73180se_inl,
- .mv_outb_p = sh73180se_outb_p,
- .mv_outw_p = sh73180se_outw,
- .mv_outl_p = sh73180se_outl,
-
- .mv_insb = sh73180se_insb,
- .mv_insw = sh73180se_insw,
- .mv_insl = sh73180se_insl,
- .mv_outsb = sh73180se_outsb,
- .mv_outsw = sh73180se_outsw,
- .mv_outsl = sh73180se_outsl,
-
- .mv_init_irq = init_73180se_IRQ,
- .mv_irq_demux = shmse_irq_demux,
-};
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-KERNEL_LOAD := $(shell printf "0x%8x" $$[$(CONFIG_PAGE_OFFSET) + \
- $(CONFIG_MEMORY_START) + \
- $(CONFIG_ZERO_PAGE_OFFSET)+0x1000])
+KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%8x" \
+ $$[$(CONFIG_PAGE_OFFSET) + \
+ $(CONFIG_MEMORY_START) + \
+ $(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
#
# IMAGE_OFFSET is the load offset of the compression loader
#
-IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_PAGE_OFFSET) + \
- $(CONFIG_MEMORY_START) + \
- $(CONFIG_BOOT_LINK_OFFSET)])
+IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
+ $$[$(CONFIG_PAGE_OFFSET) + \
+ $(CONFIG_MEMORY_START) + \
+ $(CONFIG_BOOT_LINK_OFFSET)]')
LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 11:43:22 2006
-#
-CONFIG_SUPERH=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System type
-#
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-CONFIG_SH_7300_SOLUTION_ENGINE=y
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
-CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-CONFIG_CPU_SUBTYPE_SH7300=y
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-
-#
-# Memory management options
-#
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_VSYSCALL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-
-#
-# Cache configuration
-#
-# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_DSP=y
-# CONFIG_SH_ADC is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-
-#
-# Timer support
-#
-CONFIG_SH_TMU=y
-CONFIG_SH_PCLK_FREQ=33333333
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00210000
-# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,38400 root=/dev/ram0"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-CONFIG_IPMI_HANDLER=y
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=y
-# CONFIG_IPMI_SI is not set
-CONFIG_IPMI_WATCHDOG=y
-# CONFIG_IPMI_POWEROFF is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=y
-# CONFIG_SH_WDT is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_KGDB=y
-
-#
-# KGDB configuration options
-#
-# CONFIG_MORE_COMPILE_OPTIONS is not set
-# CONFIG_KGDB_NMI is not set
-# CONFIG_KGDB_THREAD is not set
-# CONFIG_SH_KGDB_CONSOLE is not set
-# CONFIG_KGDB_SYSRQ is not set
-# CONFIG_KGDB_KERNEL_ASSERTS is not set
-
-#
-# Serial port setup
-#
-CONFIG_KGDB_DEFPORT=1
-CONFIG_KGDB_DEFBAUD=115200
-CONFIG_KGDB_DEFPARITY_N=y
-# CONFIG_KGDB_DEFPARITY_E is not set
-# CONFIG_KGDB_DEFPARITY_O is not set
-CONFIG_KGDB_DEFBITS_8=y
-# CONFIG_KGDB_DEFBITS_7 is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 11:44:45 2006
-#
-CONFIG_SUPERH=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System type
-#
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-CONFIG_SH_73180_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SH4AL_DSP=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-CONFIG_CPU_SUBTYPE_SH73180=y
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-
-#
-# Memory management options
-#
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_32BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-
-#
-# Cache configuration
-#
-# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_SH_FPU is not set
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_DSP=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-
-#
-# Timer support
-#
-CONFIG_SH_TMU=y
-CONFIG_SH_PCLK_FREQ=27000000
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00010000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,38400 root=/dev/ram"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SH_WDT is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
* the channel is.
*/
list_for_each_entry(info, ®istered_dmac_list, list) {
- if ((chan < info->first_channel_nr) ||
- (chan >= info->first_channel_nr + info->nr_channels))
+ if ((chan < info->first_vchannel_nr) ||
+ (chan >= info->first_vchannel_nr + info->nr_channels))
continue;
return info;
for (i = 0; i < info->nr_channels; i++) {
channel = &info->channels[i];
- if (channel->chan == chan)
+ if (channel->vchan == chan)
return channel;
}
}
total_channels = get_nr_channels();
+ info->first_vchannel_nr = total_channels;
for (i = 0; i < info->nr_channels; i++) {
struct dma_channel *chan = &info->channels[i];
obj-y += imask.o
obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
-obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o
obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o
obj-$(CONFIG_CPU_HAS_INTC_IRQ) += intc.o
obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o
*
* Supported system:
* On-chip supporting modules (TMU, RTC, etc.).
- * On-chip supporting modules for SH7709/SH7709A/SH7729/SH7300.
+ * On-chip supporting modules for SH7709/SH7709A/SH7729.
* Hitachi SolutionEngine external I/O:
* MS7709SE01, MS7709ASE01, and MS7750SE01
*
+++ /dev/null
-/*
- * arch/sh/kernel/cpu/irq/pint.c - Interrupt handling for PINT-based IRQs.
- *
- * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define INTC_INTER 0xA4000014UL
-#define INTC_IPRD 0xA4000018UL
-#define INTC_ICR2 0xA4000012UL
-
-/* PFC */
-#define PORT_PACR 0xA4000100UL
-#define PORT_PBCR 0xA4000102UL
-#define PORT_PCCR 0xA4000104UL
-#define PORT_PDCR 0xA4000106UL
-#define PORT_PECR 0xA4000108UL
-#define PORT_PFCR 0xA400010AUL
-#define PORT_PGCR 0xA400010CUL
-#define PORT_PHCR 0xA400010EUL
-#define PORT_PJCR 0xA4000110UL
-#define PORT_PKCR 0xA4000112UL
-#define PORT_PLCR 0xA4000114UL
-#define PORT_PMCR 0xA4000118UL
-#define PORT_PNCR 0xA400011AUL
-#define PORT_PECR2 0xA4050148UL
-#define PORT_PFCR2 0xA405014AUL
-#define PORT_PNCR2 0xA405015AUL
-
-/* I/O port */
-#define PORT_PADR 0xA4000120UL
-#define PORT_PBDR 0xA4000122UL
-#define PORT_PCDR 0xA4000124UL
-#define PORT_PDDR 0xA4000126UL
-#define PORT_PEDR 0xA4000128UL
-#define PORT_PFDR 0xA400012AUL
-#define PORT_PGDR 0xA400012CUL
-#define PORT_PHDR 0xA400012EUL
-#define PORT_PJDR 0xA4000130UL
-#define PORT_PKDR 0xA4000132UL
-#define PORT_PLDR 0xA4000134UL
-#define PORT_PMDR 0xA4000138UL
-#define PORT_PNDR 0xA400013AUL
-
-#define PINT0_IRQ 40
-#define PINT8_IRQ 41
-#define PINT_IRQ_BASE 86
-
-#define PINT0_IPR_ADDR INTC_IPRD
-#define PINT0_IPR_POS 3
-#define PINT0_PRIORITY 2
-
-#define PINT8_IPR_ADDR INTC_IPRD
-#define PINT8_IPR_POS 2
-#define PINT8_PRIORITY 2
-
-#endif /* CONFIG_CPU_SUBTYPE_SH7705 */
-
-static unsigned char pint_map[256];
-static unsigned long portcr_mask;
-
-static void enable_pint_irq(unsigned int irq);
-static void disable_pint_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_pint_irq disable_pint_irq
-
-static void mask_and_ack_pint(unsigned int);
-static void end_pint_irq(unsigned int irq);
-
-static unsigned int startup_pint_irq(unsigned int irq)
-{
- enable_pint_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type pint_irq_type = {
- .typename = "PINT-IRQ",
- .startup = startup_pint_irq,
- .shutdown = shutdown_pint_irq,
- .enable = enable_pint_irq,
- .disable = disable_pint_irq,
- .ack = mask_and_ack_pint,
- .end = end_pint_irq
-};
-
-static void disable_pint_irq(unsigned int irq)
-{
- unsigned long val;
-
- val = ctrl_inw(INTC_INTER);
- val &= ~(1 << (irq - PINT_IRQ_BASE));
- ctrl_outw(val, INTC_INTER); /* disable PINTn */
- portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2);
-}
-
-static void enable_pint_irq(unsigned int irq)
-{
- unsigned long val;
-
- val = ctrl_inw(INTC_INTER);
- val |= 1 << (irq - PINT_IRQ_BASE);
- ctrl_outw(val, INTC_INTER); /* enable PINTn */
- portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2;
-}
-
-static void mask_and_ack_pint(unsigned int irq)
-{
- disable_pint_irq(irq);
-}
-
-static void end_pint_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_pint_irq(irq);
-}
-
-void make_pint_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].chip = &pint_irq_type;
- disable_pint_irq(irq);
-}
-
-static struct ipr_data pint_ipr_map[] = {
- { PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY },
- { PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY },
-};
-
-void __init init_IRQ_pint(void)
-{
- int i;
-
- make_ipr_irq(pint_ipr_map, ARRAY_SIZE(pint_ipr_map));
-
- enable_irq(PINT0_IRQ);
- enable_irq(PINT8_IRQ);
-
- for(i = 0; i < 16; i++)
- make_pint_irq(PINT_IRQ_BASE + i);
-
- for(i = 0; i < 256; i++) {
- if (i & 1)
- pint_map[i] = 0;
- else if (i & 2)
- pint_map[i] = 1;
- else if (i & 4)
- pint_map[i] = 2;
- else if (i & 8)
- pint_map[i] = 3;
- else if (i & 0x10)
- pint_map[i] = 4;
- else if (i & 0x20)
- pint_map[i] = 5;
- else if (i & 0x40)
- pint_map[i] = 6;
- else if (i & 0x80)
- pint_map[i] = 7;
- }
-}
-
-int ipr_irq_demux(int irq)
-{
- unsigned long creg, dreg, d, sav;
-
- if (irq == PINT0_IRQ) {
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7707)
- creg = PORT_PACR;
- dreg = PORT_PADR;
-#else
- creg = PORT_PCCR;
- dreg = PORT_PCDR;
-#endif
- sav = ctrl_inw(creg);
- ctrl_outw(sav | portcr_mask, creg);
- d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) &
- ctrl_inw(INTC_INTER) & 0xff;
- ctrl_outw(sav, creg);
-
- if (d == 0)
- return irq;
-
- return PINT_IRQ_BASE + pint_map[d];
- } else if (irq == PINT8_IRQ) {
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7707)
- creg = PORT_PBCR;
- dreg = PORT_PBDR;
-#else
- creg = PORT_PFCR;
- dreg = PORT_PFDR;
-#endif
- sav = ctrl_inw(creg);
- ctrl_outw(sav | (portcr_mask >> 16), creg);
- d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) &
- (ctrl_inw(INTC_INTER) >> 8) & 0xff;
- ctrl_outw(sav, creg);
-
- if (d == 0)
- return irq;
-
- return PINT_IRQ_BASE + 8 + pint_map[d];
- }
-
- return irq;
-}
-
obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh7709.o
obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o
obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7300) += setup-sh7300.o
obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o
obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SH3) := clock-sh3.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7300) := clock-sh7300.o
clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o
clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o
clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7300.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o
obj-y += $(clock-y)
/*
- * arch/sh/kernel/cpu/sh3/clock-sh7300.c
+ * arch/sh/kernel/cpu/sh3/clock-sh7710.c
*
- * SH7300 support for the clock framework
+ * SH7710 support for the clock framework
*
* Copyright (C) 2005 Paul Mundt
*
clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007];
}
-static struct clk_ops sh7300_master_clk_ops = {
+static struct clk_ops sh7710_master_clk_ops = {
.init = master_clk_init,
};
clk->rate = clk->parent->rate / md_table[idx];
}
-static struct clk_ops sh7300_module_clk_ops = {
+static struct clk_ops sh7710_module_clk_ops = {
.recalc = module_clk_recalc,
};
clk->rate = clk->parent->rate / md_table[idx];
}
-static struct clk_ops sh7300_bus_clk_ops = {
+static struct clk_ops sh7710_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
clk->rate = clk->parent->rate / md_table[idx];
}
-static struct clk_ops sh7300_cpu_clk_ops = {
+static struct clk_ops sh7710_cpu_clk_ops = {
.recalc = cpu_clk_recalc,
};
-static struct clk_ops *sh7300_clk_ops[] = {
- &sh7300_master_clk_ops,
- &sh7300_module_clk_ops,
- &sh7300_bus_clk_ops,
- &sh7300_cpu_clk_ops,
+static struct clk_ops *sh7710_clk_ops[] = {
+ &sh7710_master_clk_ops,
+ &sh7710_module_clk_ops,
+ &sh7710_bus_clk_ops,
+ &sh7710_cpu_clk_ops,
};
void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
{
- if (idx < ARRAY_SIZE(sh7300_clk_ops))
- *ops = sh7300_clk_ops[idx];
+ if (idx < ARRAY_SIZE(sh7710_clk_ops))
+ *ops = sh7710_clk_ops[idx];
}
+++ /dev/null
-/*
- * SH7300 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <asm/sci.h>
-
-static struct plat_sci_port sci_platform_data[] = {
- {
- .mapbase = 0xa4430000,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCI,
- .irqs = { 80, 80, 80, 80 },
- }, {
- .flags = 0,
- }
-};
-
-static struct platform_device sci_device = {
- .name = "sh-sci",
- .id = -1,
- .dev = {
- .platform_data = sci_platform_data,
- },
-};
-
-static struct platform_device *sh7300_devices[] __initdata = {
- &sci_device,
-};
-
-static int __init sh7300_devices_setup(void)
-{
- return platform_add_devices(sh7300_devices,
- ARRAY_SIZE(sh7300_devices));
-}
-__initcall(sh7300_devices_setup);
current_cpu_data.type = CPU_SH7751;
current_cpu_data.flags |= CPU_HAS_FPU;
break;
- case 0x2000:
- current_cpu_data.type = CPU_SH73180;
- current_cpu_data.icache.ways = 4;
- current_cpu_data.dcache.ways = 4;
- current_cpu_data.flags |= CPU_HAS_LLSC;
- break;
case 0x2001:
case 0x2004:
current_cpu_data.type = CPU_SH7770;
void sq_unmap(unsigned long vaddr)
{
struct sq_mapping **p, *map;
- struct vm_struct *vma;
int page;
for (p = &sq_mapping_list; (map = *p); p = &map->next)
bitmap_release_region(sq_bitmap, page, get_order(map->size));
#ifdef CONFIG_MMU
- vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
- if (!vma) {
- printk(KERN_ERR "%s: bad address 0x%08lx\n",
- __FUNCTION__, map->sq_addr);
- return;
+ {
+ /*
+ * Tear down the VMA in the MMU case.
+ */
+ struct vm_struct *vma;
+
+ vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
+ if (!vma) {
+ printk(KERN_ERR "%s: bad address 0x%08lx\n",
+ __FUNCTION__, map->sq_addr);
+ return;
+ }
}
#endif
obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
-obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
# Primary on-chip clocks (common)
-clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
+++ /dev/null
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh73180.c
- *
- * SH73180 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-/*
- * SH73180 uses a common set of divisors, so this is quite simple..
- */
-static int divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= divisors[ctrl_inl(FRQCR) & 0x0007];
-}
-
-static struct clk_ops sh73180_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static void module_clk_recalc(struct clk *clk)
-{
- int idx = (ctrl_inl(FRQCR) & 0x0007);
- clk->rate = clk->parent->rate / divisors[idx];
-}
-
-static struct clk_ops sh73180_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static void bus_clk_recalc(struct clk *clk)
-{
- int idx = (ctrl_inl(FRQCR) >> 12) & 0x0007;
- clk->rate = clk->parent->rate / divisors[idx];
-}
-
-static struct clk_ops sh73180_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static void cpu_clk_recalc(struct clk *clk)
-{
- int idx = (ctrl_inl(FRQCR) >> 20) & 0x0007;
- clk->rate = clk->parent->rate / divisors[idx];
-}
-
-static struct clk_ops sh73180_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct clk_ops *sh73180_clk_ops[] = {
- &sh73180_master_clk_ops,
- &sh73180_module_clk_ops,
- &sh73180_bus_clk_ops,
- &sh73180_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh73180_clk_ops))
- *ops = sh73180_clk_ops[idx];
-}
-
+++ /dev/null
-/*
- * SH73180 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <asm/sci.h>
-
-static struct plat_sci_port sci_platform_data[] = {
- {
- .mapbase = 0xffe80000,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 80, 81, 83, 82 },
- }, {
- .flags = 0,
- }
-};
-
-static struct platform_device sci_device = {
- .name = "sh-sci",
- .id = -1,
- .dev = {
- .platform_data = sci_platform_data,
- },
-};
-
-static struct platform_device *sh73180_devices[] __initdata = {
- &sci_device,
-};
-
-static int __init sh73180_devices_setup(void)
-{
- return platform_add_devices(sh73180_devices,
- ARRAY_SIZE(sh73180_devices));
-}
-__initcall(sh73180_devices_setup);
#include <linux/sched.h>
#include <linux/init_task.h>
#include <linux/mqueue.h>
-
+#include <linux/fs.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <linux/kdebug.h>
#include <linux/tick.h>
#include <linux/reboot.h>
+#include <linux/fs.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
unsigned long get_wchan(struct task_struct *p)
{
- unsigned long schedule_frame;
unsigned long pc;
if (!p || p == current || p->state == TASK_RUNNING)
* The same comment as on the Alpha applies here, too ...
*/
pc = thread_saved_pc(p);
+
+#ifdef CONFIG_FRAME_POINTER
if (in_sched_functions(pc)) {
- schedule_frame = (unsigned long)p->thread.sp;
+ unsigned long schedule_frame = (unsigned long)p->thread.sp;
return ((unsigned long *)schedule_frame)[21];
}
+#endif
return pc;
}
static const char *cpu_name[] = {
[CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619",
- [CPU_SH7300] = "SH7300",
[CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
[CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
[CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
[CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750",
[CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R",
[CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R",
- [CPU_SH7760] = "SH7760", [CPU_SH73180] = "SH73180",
+ [CPU_SH7760] = "SH7760",
[CPU_ST40RA] = "ST40RA", [CPU_ST40GX1] = "ST40GX1",
[CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501",
[CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780",
#include <linux/file.h>
#include <linux/utsname.h>
#include <linux/module.h>
+#include <linux/fs.h>
#include <asm/cacheflush.h>
#include <asm/uaccess.h>
#include <asm/ipc.h>
tmu_timer_stop();
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
+#if !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
!defined(CONFIG_CPU_SUBTYPE_SH7785) && \
!defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
#include <linux/module.h>
#include <linux/elf.h>
#include <linux/sched.h>
+#include <linux/err.h>
/*
* Should the kernel map a VDSO page into processes and pass its
config CPU_SH4AL_DSP
bool
select CPU_SH4A
+ select CPU_HAS_DSP
config CPU_SUBTYPE_ST40
bool
# SH-3 Processor Support
-config CPU_SUBTYPE_SH7300
- bool "Support SH7300 processor"
- select CPU_SH3
-
config CPU_SUBTYPE_SH7705
bool "Support SH7705 processor"
select CPU_SH3
select CPU_HAS_IPR_IRQ
- select CPU_HAS_PINT_IRQ
config CPU_SUBTYPE_SH7706
bool "Support SH7706 processor"
config CPU_SUBTYPE_SH7707
bool "Support SH7707 processor"
select CPU_SH3
- select CPU_HAS_PINT_IRQ
help
Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
bool "Support SH7709 processor"
select CPU_SH3
select CPU_HAS_IPR_IRQ
- select CPU_HAS_PINT_IRQ
help
Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
bool "Support SH7710 processor"
select CPU_SH3
select CPU_HAS_IPR_IRQ
+ select CPU_HAS_DSP
help
Select SH7710 if you have a SH3-DSP SH7710 CPU.
bool "Support SH7712 processor"
select CPU_SH3
select CPU_HAS_IPR_IRQ
+ select CPU_HAS_DSP
help
Select SH7712 if you have a SH3-DSP SH7712 CPU.
# SH4AL-DSP Processor Support
-config CPU_SUBTYPE_SH73180
- bool "Support SH73180 processor"
- select CPU_SH4AL_DSP
-
config CPU_SUBTYPE_SH7343
bool "Support SH7343 processor"
select CPU_SH4AL_DSP
/*
* SH-4 has virtually indexed and physically tagged cache.
*/
-
-/* Worst case assumed to be 64k cache, direct-mapped i.e. 4 synonym bits. */
-#define MAX_P3_MUTEXES 16
-
-struct mutex p3map_mutex[MAX_P3_MUTEXES];
-
void __init p3_cache_init(void)
{
- int i;
-
compute_alias(¤t_cpu_data.icache);
compute_alias(¤t_cpu_data.dcache);
}
emit_cache_params();
-
- if (ioremap_page_range(P3SEG, P3SEG + (PAGE_SIZE * 4), 0, PAGE_KERNEL))
- panic("%s failed.", __FUNCTION__);
-
- for (i = 0; i < current_cpu_data.dcache.n_aliases; i++)
- mutex_init(&p3map_mutex[i]);
}
/*
* arch/sh/mm/pg-sh4.c
*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2002 - 2005 Paul Mundt
+ * Copyright (C) 2002 - 2007 Paul Mundt
*
* Released under the terms of the GNU GPL v2.0.
*/
#include <linux/mm.h>
#include <linux/mutex.h>
+#include <linux/fs.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
-extern struct mutex p3map_mutex[];
-
#define CACHE_ALIAS (current_cpu_data.dcache.alias_mask)
+static inline void *kmap_coherent(struct page *page, unsigned long addr)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr, flags;
+ pte_t pte;
+
+ inc_preempt_count();
+
+ idx = (addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT;
+ vaddr = __fix_to_virt(FIX_CMAP_END - idx);
+ pte = mk_pte(page, PAGE_KERNEL);
+
+ local_irq_save(flags);
+ flush_tlb_one(get_asid(), vaddr);
+ local_irq_restore(flags);
+
+ update_mmu_cache(NULL, vaddr, pte);
+
+ return (void *)vaddr;
+}
+
+static inline void kunmap_coherent(struct page *page)
+{
+ dec_preempt_count();
+ preempt_check_resched();
+}
+
/*
* clear_user_page
* @to: P1 address
if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
clear_page(to);
else {
- unsigned long phys_addr = PHYSADDR(to);
- unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS);
- pgd_t *pgd = pgd_offset_k(p3_addr);
- pud_t *pud = pud_offset(pgd, p3_addr);
- pmd_t *pmd = pmd_offset(pud, p3_addr);
- pte_t *pte = pte_offset_kernel(pmd, p3_addr);
- pte_t entry;
- unsigned long flags;
-
- entry = pfn_pte(phys_addr >> PAGE_SHIFT, PAGE_KERNEL);
- mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]);
- set_pte(pte, entry);
- local_irq_save(flags);
- flush_tlb_one(get_asid(), p3_addr);
- local_irq_restore(flags);
- update_mmu_cache(NULL, p3_addr, entry);
- __clear_user_page((void *)p3_addr, to);
- pte_clear(&init_mm, p3_addr, pte);
- mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]);
+ void *vto = kmap_coherent(page, address);
+ __clear_user_page(vto, to);
+ kunmap_coherent(vto);
}
}
if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
copy_page(to, from);
else {
- unsigned long phys_addr = PHYSADDR(to);
- unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS);
- pgd_t *pgd = pgd_offset_k(p3_addr);
- pud_t *pud = pud_offset(pgd, p3_addr);
- pmd_t *pmd = pmd_offset(pud, p3_addr);
- pte_t *pte = pte_offset_kernel(pmd, p3_addr);
- pte_t entry;
- unsigned long flags;
-
- entry = pfn_pte(phys_addr >> PAGE_SHIFT, PAGE_KERNEL);
- mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]);
- set_pte(pte, entry);
- local_irq_save(flags);
- flush_tlb_one(get_asid(), p3_addr);
- local_irq_restore(flags);
- update_mmu_cache(NULL, p3_addr, entry);
- __copy_user_page((void *)p3_addr, from, to);
- pte_clear(&init_mm, p3_addr, pte);
- mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]);
+ void *vfrom = kmap_coherent(page, address);
+ __copy_user_page(vfrom, from, to);
+ kunmap_coherent(vfrom);
}
}
SE SH_SOLUTION_ENGINE
7751SE SH_7751_SOLUTION_ENGINE
7722SE SH_7722_SOLUTION_ENGINE
-7300SE SH_7300_SOLUTION_ENGINE
7343SE SH_7343_SOLUTION_ENGINE
7206SE SH_7206_SOLUTION_ENGINE
7619SE SH_7619_SOLUTION_ENGINE
7780SE SH_7780_SOLUTION_ENGINE
-73180SE SH_73180_SOLUTION_ENGINE
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
HD64461 HD64461
/* Reset pre-scaler & stop RTC */
tmp = readb(rtc->regbase + RCR2);
tmp |= RCR2_RESET;
+ tmp &= ~RCR2_START;
writeb(tmp, rtc->regbase + RCR2);
writeb(BIN2BCD(tm->tm_sec), rtc->regbase + RSECCNT);
* Modified to support multiple serial ports. Stuart Menefy (May 2000).
* Modified to support SecureEdge. David McCullough (2002)
* Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
+ * Removed SH7300 support (Jul 2007).
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#endif
#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-/* SH7300 doesn't use RTS/CTS */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
- sci_out(port, SCFCR, 0);
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
{
unsigned int fcr_val = 0;
* Modified to support multiple serial ports. Stuart Menefy (May 2000).
* Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
* Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
+ * Removed SH7300 support (Jul 2007).
*/
#include <linux/serial_core.h>
#include <asm/io.h>
#endif
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7708)
-# define SCSPTR 0xffffff7c /* 8 bit */
-# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7706)
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7708) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */
# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
-# define SCPCR 0xA4050116 /* 16 bit SCIF */
-# define SCPDR 0xA4050136 /* 16 bit SCIF */
-# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
# define SCI_NPORTS 2
# define PBCR 0xa4050102
# define SCSCR_INIT(port) 0x3B
# define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
-# define SCPDR 0xA4050138 /* 16 bit SCIF */
-# define SCSPTR2 SCPDR
-# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
# define SCSPTR0 0xffe00010 /* 16 bit SCIF */
# define SCSPTR1 0xffe10010 /* 16 bit SCIF */
#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
#define SCIF_ORER 0x0200
#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
#define SCIF_RFDC_MASK 0x007f
# define SCxSR_ERRORS(port) SCIF_ERRORS
# define SCxSR_RDxF(port) SCIF_RDF
# define SCxSR_TDxE(port) SCIF_TDFE
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
# define SCxSR_ORER(port) SCIF_ORER
#else
# define SCxSR_ORER(port) 0x0000
# define SCxSR_FER(port) SCIF_FER
# define SCxSR_PER(port) SCIF_PER
# define SCxSR_BRK(port) SCIF_BRK
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf)
# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3)
#else
-/* SH7705 can also use this, clearing is same between 7705 and 7709 and 7300 */
+/* SH7705 can also use this, clearing is same between 7705 and 7709 */
# define SCxSR_RDxF_CLEAR(port) 0x00fc
# define SCxSR_ERROR_CLEAR(port) 0x0073
# define SCxSR_TDxE_CLEAR(port) 0x00df
CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \
- defined(CONFIG_CPU_SUBTYPE_SH7705)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
- defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
};
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7708)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xfffffe80)
- return ctrl_inb(SCSPTR)&0x01 ? 1 : 0; /* SCI */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7706)
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7708) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xfffffe80)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xa4430000)
- return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
- return 1;
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
-}
#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
static inline int sci_rxd_in(struct uart_port *port)
{
* -- Mitch Davis - 15 Jul 2000
*/
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
*p++ = '2';
*p++ = 'a';
break;
- case CPU_SH7705 ... CPU_SH7300:
+ case CPU_SH7705 ... CPU_SH7729:
*p++ = '3';
break;
case CPU_SH7750 ... CPU_SH4_501:
*p++ = '4';
*p++ = 'a';
break;
- case CPU_SH73180 ... CPU_SH7722:
+ case CPU_SH7343 ... CPU_SH7722:
*p++ = '4';
*p++ = 'a';
*p++ = 'l';
#ifndef __ASM_CPU_SH3_FREQ_H
#define __ASM_CPU_SH3_FREQ_H
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-#define FRQCR 0xa415ff80
-#else
#define FRQCR 0xffffff80
-#endif
#define MIN_DIVISOR_NR 0
#define MAX_DIVISOR_NR 4
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709) || \
defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300) || \
defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7712) || \
defined(CONFIG_CPU_SUBTYPE_SH7710)
* SH7729R
* SH7710
* SH7720
- * SH7300
* SH7710
* ---------------------------------------------------------------------------
*/
#define TMU_TOCR 0xfffffe90 /* Byte access */
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
#define TMU_012_TSTR 0xa412fe92 /* Byte access */
#define TMU0_TCOR 0xa412fe94 /* Long access */
#ifndef __ASM_CPU_SH4_FREQ_H
#define __ASM_CPU_SH4_FREQ_H
-#if defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7722)
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
#define FRQCR 0xa4150000
#define VCLKCR 0xa4150004
#define SCLKACR 0xa4150008
{
#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
if (dev->bus == &pci_bus_type)
- return virt_to_bus(ptr);
+ return virt_to_phys(ptr);
#endif
dma_cache_sync(dev, ptr, size, dir);
- return virt_to_bus(ptr);
+ return virt_to_phys(ptr);
}
#define dma_unmap_single(dev, addr, size, dir) do { } while (0)
if (dev->bus == &pci_bus_type)
return;
#endif
- dma_cache_sync(dev, bus_to_virt(dma_handle), size, dir);
+ dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir);
}
static inline void dma_sync_single_range(struct device *dev,
if (dev->bus == &pci_bus_type)
return;
#endif
- dma_cache_sync(dev, bus_to_virt(dma_handle) + offset, size, dir);
+ dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
}
static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
struct list_head list;
int first_channel_nr;
+ int first_vchannel_nr;
};
struct dma_chan_caps {
* fix-mapped?
*/
enum fixed_addresses {
+#define FIX_N_COLOURS 16
+ FIX_CMAP_BEGIN,
+ FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
#ifdef CONFIG_HIGHMEM
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
__end_of_fixed_addresses
};
-extern void __set_fixmap (enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags);
+extern void __set_fixmap(enum fixed_addresses idx,
+ unsigned long phys, pgprot_t flags);
#define set_fixmap(idx, phys) \
__set_fixmap(idx, phys, PAGE_KERNEL)
BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
return __virt_to_fix(vaddr);
}
-
#endif
{
if(can_use_virtual_dma == 2) {
if((unsigned int) addr >= (unsigned int) high_memory ||
- virt_to_bus(addr) >= 0x10000000)
+ virt_to_phys(addr) >= 0x10000000)
use_virtual_dma = 1;
else
use_virtual_dma = 0;
doing_pdma = 0;
clear_dma_ff(FLOPPY_DMA);
set_dma_mode(FLOPPY_DMA,mode);
- set_dma_addr(FLOPPY_DMA,virt_to_bus(addr));
+ set_dma_addr(FLOPPY_DMA,virt_to_phys(addr));
set_dma_count(FLOPPY_DMA,size);
enable_dma(FLOPPY_DMA);
return 0;
#define virt_to_phys(address) ((unsigned long)(address))
#endif
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-#define page_to_bus page_to_phys
-
/*
* readX/writeX() are used to access memory mapped devices. On some
* architectures the memory mapped IO stuff needs to be accessed
#define PTE_PHYS_MASK (0x20000000 - PAGE_SIZE)
-/*
- * First 1MB map is used by fixed purpose.
- * Currently only 4-entry (16kB) is used (see arch/sh/mm/cache.c)
- */
-#define VMALLOC_START (P3SEG+0x00100000)
+#define VMALLOC_START (P3SEG)
#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
/*
CPU_SH7705, CPU_SH7706, CPU_SH7707,
CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
- CPU_SH7729, CPU_SH7300,
+ CPU_SH7729,
/* SH-4 types */
CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
/* SH4AL-DSP types */
- CPU_SH73180, CPU_SH7343, CPU_SH7722,
+ CPU_SH7343, CPU_SH7722,
/* Unknown subtype */
CPU_SH_NONE
+++ /dev/null
-#ifndef __ASM_SH_HITACHI_SE7300_H
-#define __ASM_SH_HITACHI_SE7300_H
-
-/*
- * linux/include/asm-sh/se/se7300.h
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7300 support
- */
-
-/* Box specific addresses. */
-
-/* Area 0 */
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */
-#define PA_FROM 0x00400000 /* Flash ROM */
-#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */
-#define PA_SRAM 0x00800000 /* SRAM */
-#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */
-/* Area 1 */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-/* Area 2 */
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-/* Area 3 */
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-/* Area 4 */
-#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-#define PA_LED 0xb0800000 /* LED */
-#define PA_DIPSW 0xb0900000 /* Dip switch 31 */
-#define PA_EPLD_MODESET 0xb0a00000 /* FPGA Mode set register */
-#define PA_EPLD_ST1 0xb0a80000 /* FPGA Interrupt status register1 */
-#define PA_EPLD_ST2 0xb0ac0000 /* FPGA Interrupt status register2 */
-/* Area 5 */
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-/* Area 6 */
-#define PA_LCD1 0xb8000000
-#define PA_LCD2 0xb8800000
-
-#define __IO_PREFIX sh7300se
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_HITACHI_SE7300_H */
+++ /dev/null
-#ifndef __ASM_SH_SE73180_H
-#define __ASM_SH_SE73180_H
-
-/*
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 73180 support
- */
-
-/* Box specific addresses. */
-
-/* Area 0 */
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */
-#define PA_FROM 0x00400000 /* Flash ROM */
-#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */
-#define PA_SRAM 0x00800000 /* SRAM */
-#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */
-/* Area 1 */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-/* Area 2 */
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-/* Area 3 */
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-/* Area 4 */
-#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-#define PA_LED 0xb0C00000 /* LED */
-#define LED_SHIFT 0
-#define PA_DIPSW 0xb0900000 /* Dip switch 31 */
-#define PA_EPLD_MODESET 0xb0a00000 /* FPGA Mode set register */
-#define PA_EPLD_ST1 0xb0a80000 /* FPGA Interrupt status register1 */
-#define PA_EPLD_ST2 0xb0ac0000 /* FPGA Interrupt status register2 */
-/* Area 5 */
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-/* Area 6 */
-#define PA_LCD1 0xb8000000
-#define PA_LCD2 0xb8800000
-
-#define __IO_PREFIX sh73180se
-#include <asm/io_generic.h>
-
-/* arch/sh/boards/se/73180/irq.c */
-int shmse_irq_demux(int irq);
-
-#endif /* __ASM_SH_SE73180_H */
#include <asm/cpu/ubc.h>
/* User Break Controller */
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300)
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729)
#else
#define UBC_TYPE_SH7729 0
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size (Look out for broken compilers!)"
default y
- depends on ARM || H8300 || EXPERIMENTAL
+ depends on ARM || H8300 || SUPERH || EXPERIMENTAL
help
Enabling this option will pass "-Os" instead of "-O2" to gcc
resulting in a smaller kernel.
#define AICA_CHANNEL1_OFFSET 0x21000
#define CHANNEL_OFFSET 0x10000
-#define AICA_DMA_CHANNEL 0
+#define AICA_DMA_CHANNEL 5
#define AICA_DMA_MODE 5
#define SND_AICA_DRIVER "AICA"
git.openpandora.org / pandora-kernel.git / commitdiff