ARM: mach-davinci: clean up debug-macro.S
authorNicolas Pitre <nicolas.pitre@linaro.org>
Fri, 2 Sep 2011 00:50:14 +0000 (20:50 -0400)
committerNicolas Pitre <nico@fluxnic.net>
Mon, 26 Sep 2011 14:11:28 +0000 (10:11 -0400)
This achieves two goals:

1) Get rid of davinci_uart_v2p() and davinci_uart_p2v() which were the
   last users of PLAT_PHYS_OFFSET.

2) Remove the probing of the M bit in the CP15 control reg and make
   the access to the .data variables completely position independent.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
arch/arm/mach-davinci/include/mach/debug-macro.S

index 45fff2c..cf94552 100644 (file)
 
 #include <linux/serial_reg.h>
 
-#include <asm/memory.h>
-
 #include <mach/serial.h>
 
 #define UART_SHIFT     2
 
-#define davinci_uart_v2p(x)    ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define davinci_uart_p2v(x)    ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
                .pushsection .data
 davinci_uart_phys:     .word   0
 davinci_uart_virt:     .word   0
@@ -35,38 +30,38 @@ davinci_uart_virt:  .word   0
                .macro addruart, rp, rv, tmp
 
                /* Use davinci_uart_phys/virt if already configured */
-10:            mrc     p15, 0, \rp, c1, c0
-               tst     \rp, #1                 @ MMU enabled?
-               ldreq   \rp, =davinci_uart_v2p(davinci_uart_phys)
-               ldrne   \rp, =davinci_uart_phys
-               add     \rv, \rp, #4            @ davinci_uart_virt
-               ldr     \rp, [\rp, #0]
-               ldr     \rv, [\rv, #0]
+10:            adr     \rp, 99f                @ get effective addr of 99f
+               ldr     \rv, [\rp]              @ get absolute addr of 99f
+               sub     \rv, \rv, \rp           @ offset between the two
+               ldr     \rp, [\rp, #4]          @ abs addr of omap_uart_phys
+               sub     \tmp, \rp, \rv          @ make it effective
+               ldr     \rp, [\tmp, #0]         @ davinci_uart_phys
+               ldr     \rv, [\tmp, #4]         @ davinci_uart_virt
                cmp     \rp, #0                 @ is port configured?
                cmpne   \rv, #0
-               bne     99f                     @ already configured
+               bne     100f                    @ already configured
 
                /* Check the debug UART address set in uncompress.h */
-               mrc     p15, 0, \rp, c1, c0
-               tst     \rp, #1                 @ MMU enabled?
-
                and     \rp, pc, #0xff000000
                ldr     \rv, =DAVINCI_UART_INFO_OFS
                add     \rp, \rp, \rv
 
-               ldreq   \rv, =davinci_uart_v2p(davinci_uart_phys)
-               ldrne   \rv, =davinci_uart_phys
-
                /* Copy uart phys address from decompressor uart info */
-               ldr     \tmp, [\rp, #0]
-               str     \tmp, [\rv, #0]
+               ldr     \rv, [\rp, #0]
+               str     \rv, [\tmp, #0]
 
                /* Copy uart virt address from decompressor uart info */
-               ldr     \tmp, [\rp, #4]
-               str     \tmp, [\rv, #4]
+               ldr     \rv, [\rp, #4]
+               str     \rv, [\tmp, #4]
 
                b       10b
-99:
+
+               .align
+99:            .word   .
+               .word   davinci_uart_phys
+               .ltorg
+
+100:
                .endm
 
                .macro  senduart,rd,rx