--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/usb-tusb6010.c
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb/musb.h>
+
+#include <asm/arch/gpmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+
+
+static u8 async_cs, sync_cs;
+static unsigned refclk_psec;
+
+
+/* t2_ps, when quantized to fclk units, must happen no earlier than
+ * the clock after after t1_NS.
+ *
+ * Return a possibly updated value of t2_ps, converted to nsec.
+ */
+static unsigned
+next_clk(unsigned t1_NS, unsigned t2_ps, unsigned fclk_ps)
+{
+ unsigned t1_ps = t1_NS * 1000;
+ unsigned t1_f, t2_f;
+
+ if ((t1_ps + fclk_ps) < t2_ps)
+ return t2_ps / 1000;
+
+ t1_f = (t1_ps + fclk_ps - 1) / fclk_ps;
+ t2_f = (t2_ps + fclk_ps - 1) / fclk_ps;
+
+ if (t1_f >= t2_f)
+ t2_f = t1_f + 1;
+
+ return (t2_f * fclk_ps) / 1000;
+}
+
+/* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
+
+static int tusb_set_async_mode(unsigned sysclk_ps, unsigned fclk_ps)
+{
+ struct gpmc_timings t;
+ unsigned t_acsnh_advnh = sysclk_ps + 3000;
+ unsigned tmp;
+
+ memset(&t, 0, sizeof(t));
+
+ /* CS_ON = t_acsnh_acsnl */
+ t.cs_on = 8;
+ /* ADV_ON = t_acsnh_advnh - t_advn */
+ t.adv_on = next_clk(t.cs_on, t_acsnh_advnh - 7000, fclk_ps);
+
+ /*
+ * READ ... from omap2420 TRM fig 12-13
+ */
+
+ /* ADV_RD_OFF = t_acsnh_advnh */
+ t.adv_rd_off = next_clk(t.adv_on, t_acsnh_advnh, fclk_ps);
+
+ /* OE_ON = t_acsnh_advnh + t_advn_oen (then wait for nRDY) */
+ t.oe_on = next_clk(t.adv_on, t_acsnh_advnh + 1000, fclk_ps);
+
+ /* ACCESS = counters continue only after nRDY */
+ tmp = t.oe_on * 1000 + 300;
+ t.access = next_clk(t.oe_on, tmp, fclk_ps);
+
+ /* OE_OFF = after data gets sampled */
+ tmp = t.access * 1000;
+ t.oe_off = next_clk(t.access, tmp, fclk_ps);
+
+ t.cs_rd_off = t.oe_off;
+
+ tmp = t.cs_rd_off * 1000 + 7000 /* t_acsn_rdy_z */;
+ t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps);
+
+ /*
+ * WRITE ... from omap2420 TRM fig 12-15
+ */
+
+ /* ADV_WR_OFF = t_acsnh_advnh */
+ t.adv_wr_off = t.adv_rd_off;
+
+ /* WE_ON = t_acsnh_advnh + t_advn_wen (then wait for nRDY) */
+ t.we_on = next_clk(t.adv_wr_off, t_acsnh_advnh + 1000, fclk_ps);
+
+ /* WE_OFF = after data gets sampled */
+ tmp = t.we_on * 1000 + 300;
+ t.we_off = next_clk(t.we_on, tmp, fclk_ps);
+
+ t.cs_wr_off = t.we_off;
+
+ tmp = t.cs_wr_off * 1000 + 7000 /* t_acsn_rdy_z */;
+ t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps);
+
+ return gpmc_cs_set_timings(async_cs, &t);
+}
+
+static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps)
+{
+ struct gpmc_timings t;
+ unsigned t_scsnh_advnh = sysclk_ps + 3000;
+ unsigned tmp;
+
+ memset(&t, 0, sizeof(t));
+ t.cs_on = 8;
+
+ /* ADV_ON = t_acsnh_advnh - t_advn */
+ t.adv_on = next_clk(t.cs_on, t_scsnh_advnh - 7000, fclk_ps);
+
+ /* GPMC_CLK rate = fclk rate / div */
+ t.sync_clk = 12 /* 11.1 nsec */;
+ tmp = (t.sync_clk * 1000 + fclk_ps - 1) / fclk_ps;
+ if (tmp > 4)
+ return -ERANGE;
+ if (tmp <= 0)
+ tmp = 1;
+ t.page_burst_access = (fclk_ps * tmp) / 1000;
+
+ /*
+ * READ ... based on omap2420 TRM fig 12-19, 12-20
+ */
+
+ /* ADV_RD_OFF = t_scsnh_advnh */
+ t.adv_rd_off = next_clk(t.adv_on, t_scsnh_advnh, fclk_ps);
+
+ /* OE_ON = t_scsnh_advnh + t_advn_oen * fclk_ps (then wait for nRDY) */
+ tmp = (t.adv_rd_off * 1000) + (3 * fclk_ps);
+ t.oe_on = next_clk(t.adv_on, tmp, fclk_ps);
+
+ /* ACCESS = number of clock cycles after t_adv_eon */
+ tmp = (t.oe_on * 1000) + (5 * fclk_ps);
+ t.access = next_clk(t.oe_on, tmp, fclk_ps);
+
+ /* OE_OFF = after data gets sampled */
+ tmp = (t.access * 1000) + (1 * fclk_ps);
+ t.oe_off = next_clk(t.access, tmp, fclk_ps);
+
+ t.cs_rd_off = t.oe_off;
+
+ tmp = t.cs_rd_off * 1000 + 7000 /* t_scsn_rdy_z */;
+ t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps);
+
+ /*
+ * WRITE ... based on omap2420 TRM fig 12-21
+ */
+
+ /* ADV_WR_OFF = t_scsnh_advnh */
+ t.adv_wr_off = t.adv_rd_off;
+
+ /* WE_ON = t_scsnh_advnh + t_advn_wen * fclk_ps (then wait for nRDY) */
+ tmp = (t.adv_wr_off * 1000) + (3 * fclk_ps);
+ t.we_on = next_clk(t.adv_wr_off, tmp, fclk_ps);
+
+ /* WE_OFF = number of clock cycles after t_adv_wen */
+ tmp = (t.we_on * 1000) + (6 * fclk_ps);
+ t.we_off = next_clk(t.we_on, tmp, fclk_ps);
+
+ t.cs_wr_off = t.we_off;
+
+ tmp = t.cs_wr_off * 1000 + 7000 /* t_scsn_rdy_z */;
+ t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps);
+
+ return gpmc_cs_set_timings(sync_cs, &t);
+}
+
+extern unsigned long gpmc_get_fclk_period(void);
+
+/* tusb driver calls this when it changes the chip's clocking */
+int tusb6010_platform_retime(unsigned is_refclk)
+{
+ static const char error[] =
+ KERN_ERR "tusb6010 %s retime error %d\n";
+
+ unsigned fclk_ps = gpmc_get_fclk_period();
+ unsigned sysclk_ps;
+ int status;
+
+ if (!refclk_psec)
+ return -ENODEV;
+
+ sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
+
+ status = tusb_set_async_mode(sysclk_ps, fclk_ps);
+ if (status < 0) {
+ printk(error, "async", status);
+ goto done;
+ }
+ status = tusb_set_sync_mode(sysclk_ps, fclk_ps);
+ if (status < 0)
+ printk(error, "sync", status);
+done:
+ return status;
+}
+EXPORT_SYMBOL_GPL(tusb6010_platform_retime);
+
+static struct resource tusb_resources[] = {
+ /* Order is significant! The start/end fields
+ * are updated during setup..
+ */
+ { /* Asynchronous access */
+ .flags = IORESOURCE_MEM,
+ },
+ { /* Synchronous access */
+ .flags = IORESOURCE_MEM,
+ },
+ { /* IRQ */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 tusb_dmamask = ~(u32)0;
+
+static struct platform_device tusb_device = {
+ .name = "musb_hdrc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &tusb_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(tusb_resources),
+ .resource = tusb_resources,
+};
+
+
+/* this may be called only from board-*.c setup code */
+int __init
+tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
+ unsigned ps_refclk, unsigned waitpin,
+ unsigned async, unsigned sync,
+ unsigned irq, unsigned dmachan)
+{
+ int status;
+ static char error[] __initdata =
+ KERN_ERR "tusb6010 init error %d, %d\n";
+
+ /* ASYNC region, primarily for PIO */
+ status = gpmc_cs_request(async, SZ_16M, (unsigned long *)
+ &tusb_resources[0].start);
+ if (status < 0) {
+ printk(error, 1, status);
+ return status;
+ }
+ tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
+ async_cs = async;
+ gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_PAGE_LEN(2)
+ | GPMC_CONFIG1_WAIT_READ_MON
+ | GPMC_CONFIG1_WAIT_WRITE_MON
+ | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
+ | GPMC_CONFIG1_READTYPE_ASYNC
+ | GPMC_CONFIG1_WRITETYPE_ASYNC
+ | GPMC_CONFIG1_DEVICESIZE_16
+ | GPMC_CONFIG1_DEVICETYPE_NOR
+ | GPMC_CONFIG1_MUXADDDATA);
+
+
+ /* SYNC region, primarily for DMA */
+ status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
+ &tusb_resources[1].start);
+ if (status < 0) {
+ printk(error, 2, status);
+ return status;
+ }
+ tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
+ sync_cs = sync;
+ gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_READMULTIPLE_SUPP
+ | GPMC_CONFIG1_READTYPE_SYNC
+ | GPMC_CONFIG1_WRITEMULTIPLE_SUPP
+ | GPMC_CONFIG1_WRITETYPE_SYNC
+ | GPMC_CONFIG1_CLKACTIVATIONTIME(1)
+ | GPMC_CONFIG1_PAGE_LEN(2)
+ | GPMC_CONFIG1_WAIT_READ_MON
+ | GPMC_CONFIG1_WAIT_WRITE_MON
+ | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
+ | GPMC_CONFIG1_DEVICESIZE_16
+ | GPMC_CONFIG1_DEVICETYPE_NOR
+ | GPMC_CONFIG1_MUXADDDATA
+ /* fclk divider gets set later */
+ );
+
+ /* IRQ */
+ status = omap_request_gpio(irq);
+ if (status < 0) {
+ printk(error, 3, status);
+ return status;
+ }
+ omap_set_gpio_direction(irq, 1);
+ tusb_resources[2].start = irq + IH_GPIO_BASE;
+
+ /* set up memory timings ... can speed them up later */
+ if (!ps_refclk) {
+ printk(error, 4, status);
+ return -ENODEV;
+ }
+ refclk_psec = ps_refclk;
+ status = tusb6010_platform_retime(1);
+ if (status < 0) {
+ printk(error, 5, status);
+ return status;
+ }
+
+ /* finish device setup ... */
+ if (!data) {
+ printk(error, 6, status);
+ return -ENODEV;
+ }
+ data->multipoint = 1;
+ tusb_device.dev.platform_data = data;
+
+ /* REVISIT let the driver know what DMA channels work */
+ if (!dmachan)
+ tusb_device.dev.dma_mask = NULL;
+ else {
+ /* assume OMAP 2420 ES2.0 and later */
+ if (dmachan & (1 << 0))
+ omap_cfg_reg(AA10_242X_DMAREQ0);
+ if (dmachan & (1 << 1))
+ omap_cfg_reg(AA6_242X_DMAREQ1);
+ if (dmachan & (1 << 2))
+ omap_cfg_reg(E4_242X_DMAREQ2);
+ if (dmachan & (1 << 3))
+ omap_cfg_reg(G4_242X_DMAREQ3);
+ if (dmachan & (1 << 4))
+ omap_cfg_reg(D3_242X_DMAREQ4);
+ if (dmachan & (1 << 5))
+ omap_cfg_reg(E3_242X_DMAREQ5);
+ }
+
+ /* so far so good ... register the device */
+ status = platform_device_register(&tusb_device);
+ if (status < 0) {
+ printk(error, 7, status);
+ return status;
+ }
+ return 0;
+}
git.openpandora.org / pandora-kernel.git / commitdiff