remove leftover arch/x86/mach-visws/* files.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager
mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager/
-# VISWS subarch support
-#mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
-#mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws/
-
# generic subarchitecture
mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := setup.o setup_visws.o traps.o
-
-obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o
+++ /dev/null
-/*
- * Machine specific setup for generic
- */
-
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/acpi.h>
-#include <asm/arch_hooks.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-
-/*
- * Any quirks to be performed to initialize timers/irqs/etc?
- */
-int (*arch_time_init_quirk)(void);
-int (*arch_pre_intr_init_quirk)(void);
-int (*arch_intr_init_quirk)(void);
-int (*arch_trap_init_quirk)(void);
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define DEFAULT_SEND_IPI (1)
-#else
-#define DEFAULT_SEND_IPI (0)
-#endif
-
-int no_broadcast=DEFAULT_SEND_IPI;
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- * Perform any necessary interrupt initialisation prior to setting up
- * the "ordinary" interrupt call gates. For legacy reasons, the ISA
- * interrupts should be initialised here if the machine emulates a PC
- * in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
- if (arch_pre_intr_init_quirk) {
- if (arch_pre_intr_init_quirk())
- return;
- }
- init_ISA_irqs();
-}
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
- .handler = no_action,
- .mask = CPU_MASK_NONE,
- .name = "cascade",
-};
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- * Fill in any interrupts that may have been left out by the general
- * init_IRQ() routine. interrupts having to do with the machine rather
- * than the devices on the I/O bus (like APIC interrupts in intel MP
- * systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
- if (arch_intr_init_quirk) {
- if (arch_intr_init_quirk())
- return;
- }
-#ifdef CONFIG_X86_LOCAL_APIC
- apic_intr_init();
-#endif
-
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- * generally used to activate any machine specific identification
- * routines that may be needed before setup_arch() runs. On VISWS
- * this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- * Called as the final act of trap_init(). Used in VISWS to initialise
- * the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
- if (arch_trap_init_quirk) {
- if (arch_trap_init_quirk())
- return;
- }
-}
-
-static struct irqaction irq0 = {
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
- .mask = CPU_MASK_NONE,
- .name = "timer"
-};
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- * Must plug the system timer interrupt source at HZ into the IRQ listed
- * in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
- if (arch_time_init_quirk) {
- /*
- * A nonzero return code does not mean failure, it means
- * that the architecture quirk does not want any
- * generic (timer) setup to be performed after this:
- */
- if (arch_time_init_quirk())
- return;
- }
-
- irq0.mask = cpumask_of_cpu(0);
- setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- * The MCA (Microchannel Architecture) has an NMI chain for NMI sources
- * along the MCA bus. Use this to hook into that chain if you will need
- * it.
- **/
-void mca_nmi_hook(void)
-{
- /* If I recall correctly, there's a whole bunch of other things that
- * we can do to check for NMI problems, but that's all I know about
- * at the moment.
- */
-
- printk("NMI generated from unknown source!\n");
-}
-#endif
-
-static __init int no_ipi_broadcast(char *str)
-{
- get_option(&str, &no_broadcast);
- printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
- "IPI Broadcast");
- return 1;
-}
-
-__setup("no_ipi_broadcast=", no_ipi_broadcast);
-
-static int __init print_ipi_mode(void)
-{
- printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
- "Shortcut");
- return 0;
-}
-
-late_initcall(print_ipi_mode);
-
+++ /dev/null
-/*
- * Unmaintained SGI Visual Workstation support.
- * Split out from setup.c by davej@suse.de
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/visws/cobalt.h>
-#include <asm/visws/piix4.h>
-#include <asm/arch_hooks.h>
-#include <asm/fixmap.h>
-#include <asm/reboot.h>
-#include <asm/setup.h>
-#include <asm/e820.h>
-#include <asm/smp.h>
-#include <asm/io.h>
-
-#include <mach_ipi.h>
-
-#include "mach_apic.h"
-
-#include <linux/init.h>
-#include <linux/smp.h>
-
-char visws_board_type = -1;
-char visws_board_rev = -1;
-
-int is_visws_box(void)
-{
- return visws_board_type >= 0;
-}
-
-static int __init visws_time_init_quirk(void)
-{
- printk(KERN_INFO "Starting Cobalt Timer system clock\n");
-
- /* Set the countdown value */
- co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
-
- /* Start the timer */
- co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
-
- /* Enable (unmask) the timer interrupt */
- co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
-
- /*
- * Zero return means the generic timer setup code will set up
- * the standard vector:
- */
- return 0;
-}
-
-static int __init visws_pre_intr_init_quirk(void)
-{
- init_VISWS_APIC_irqs();
-
- /*
- * We dont want ISA irqs to be set up by the generic code:
- */
- return 1;
-}
-
-/* Quirk for machine specific memory setup. */
-
-#define MB (1024 * 1024)
-
-unsigned long sgivwfb_mem_phys;
-unsigned long sgivwfb_mem_size;
-EXPORT_SYMBOL(sgivwfb_mem_phys);
-EXPORT_SYMBOL(sgivwfb_mem_size);
-
-long long mem_size __initdata = 0;
-
-static char * __init visws_memory_setup_quirk(void)
-{
- long long gfx_mem_size = 8 * MB;
-
- mem_size = boot_params.alt_mem_k;
-
- if (!mem_size) {
- printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
- mem_size = 128 * MB;
- }
-
- /*
- * this hardcodes the graphics memory to 8 MB
- * it really should be sized dynamically (or at least
- * set as a boot param)
- */
- if (!sgivwfb_mem_size) {
- printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
- sgivwfb_mem_size = 8 * MB;
- }
-
- /*
- * Trim to nearest MB
- */
- sgivwfb_mem_size &= ~((1 << 20) - 1);
- sgivwfb_mem_phys = mem_size - gfx_mem_size;
-
- e820_add_region(0, LOWMEMSIZE(), E820_RAM);
- e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
- e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
-
- return "PROM";
-}
-
-static void visws_machine_emergency_restart(void)
-{
- /*
- * Visual Workstations restart after this
- * register is poked on the PIIX4
- */
- outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
-}
-
-static void visws_machine_power_off(void)
-{
- unsigned short pm_status;
-/* extern unsigned int pci_bus0; */
-
- while ((pm_status = inw(PMSTS_PORT)) & 0x100)
- outw(pm_status, PMSTS_PORT);
-
- outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
-
- mdelay(10);
-
-#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
- (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
-
-/* outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
- outl(PIIX_SPECIAL_STOP, 0xCFC);
-}
-
-static int __init visws_get_smp_config_quirk(unsigned int early)
-{
- /*
- * Prevent MP-table parsing by the generic code:
- */
- return 1;
-}
-
-extern unsigned int __cpuinitdata maxcpus;
-
-/*
- * The Visual Workstation is Intel MP compliant in the hardware
- * sense, but it doesn't have a BIOS(-configuration table).
- * No problem for Linux.
- */
-
-static void __init MP_processor_info (struct mpc_config_processor *m)
-{
- int ver, logical_apicid;
- physid_mask_t apic_cpus;
-
- if (!(m->mpc_cpuflag & CPU_ENABLED))
- return;
-
- logical_apicid = m->mpc_apicid;
- printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
- m->mpc_cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver);
-
- if (m->mpc_cpuflag & CPU_BOOTPROCESSOR)
- boot_cpu_physical_apicid = m->mpc_apicid;
-
- ver = m->mpc_apicver;
- if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) {
- printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
- m->mpc_apicid, MAX_APICS);
- return;
- }
-
- apic_cpus = apicid_to_cpu_present(m->mpc_apicid);
- physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
- /*
- * Validate version
- */
- if (ver == 0x0) {
- printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
- "fixing up to 0x10. (tell your hw vendor)\n",
- m->mpc_apicid);
- ver = 0x10;
- }
- apic_version[m->mpc_apicid] = ver;
-}
-
-int __init visws_find_smp_config_quirk(unsigned int reserve)
-{
- struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
- unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
-
- if (ncpus > CO_CPU_MAX) {
- printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
- ncpus, mp);
-
- ncpus = CO_CPU_MAX;
- }
-
- if (ncpus > maxcpus)
- ncpus = maxcpus;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- smp_found_config = 1;
-#endif
- while (ncpus--)
- MP_processor_info(mp++);
-
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
- return 1;
-}
-
-extern int visws_trap_init_quirk(void);
-
-void __init visws_early_detect(void)
-{
- int raw;
-
- visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
- >> PIIX_GPI_BD_SHIFT;
-
- if (visws_board_type < 0)
- return;
-
- /*
- * Install special quirks for timer, interrupt and memory setup:
- */
- arch_time_init_quirk = visws_time_init_quirk;
- arch_pre_intr_init_quirk = visws_pre_intr_init_quirk;
- arch_memory_setup_quirk = visws_memory_setup_quirk;
-
- /*
- * Fall back to generic behavior for traps:
- */
- arch_intr_init_quirk = NULL;
- arch_trap_init_quirk = visws_trap_init_quirk;
-
- /*
- * Install reboot quirks:
- */
- pm_power_off = visws_machine_power_off;
- machine_ops.emergency_restart = visws_machine_emergency_restart;
-
- /*
- * Do not use broadcast IPIs:
- */
- no_broadcast = 0;
-
- /*
- * Override generic MP-table parsing:
- */
- mach_get_smp_config_quirk = visws_get_smp_config_quirk;
- mach_find_smp_config_quirk = visws_find_smp_config_quirk;
-
- /*
- * Get Board rev.
- * First, we have to initialize the 307 part to allow us access
- * to the GPIO registers. Let's map them at 0x0fc0 which is right
- * after the PIIX4 PM section.
- */
- outb_p(SIO_DEV_SEL, SIO_INDEX);
- outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */
-
- outb_p(SIO_DEV_MSB, SIO_INDEX);
- outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */
-
- outb_p(SIO_DEV_LSB, SIO_INDEX);
- outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */
-
- outb_p(SIO_DEV_ENB, SIO_INDEX);
- outb_p(1, SIO_DATA); /* Enable GPIO registers. */
-
- /*
- * Now, we have to map the power management section to write
- * a bit which enables access to the GPIO registers.
- * What lunatic came up with this shit?
- */
- outb_p(SIO_DEV_SEL, SIO_INDEX);
- outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */
-
- outb_p(SIO_DEV_MSB, SIO_INDEX);
- outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */
-
- outb_p(SIO_DEV_LSB, SIO_INDEX);
- outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */
-
- outb_p(SIO_DEV_ENB, SIO_INDEX);
- outb_p(1, SIO_DATA); /* Enable PM registers. */
-
- /*
- * Now, write the PM register which enables the GPIO registers.
- */
- outb_p(SIO_PM_FER2, SIO_PM_INDEX);
- outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
-
- /*
- * Now, initialize the GPIO registers.
- * We want them all to be inputs which is the
- * power on default, so let's leave them alone.
- * So, let's just read the board rev!
- */
- raw = inb_p(SIO_GP_DATA1);
- raw &= 0x7f; /* 7 bits of valid board revision ID. */
-
- if (visws_board_type == VISWS_320) {
- if (raw < 0x6) {
- visws_board_rev = 4;
- } else if (raw < 0xc) {
- visws_board_rev = 5;
- } else {
- visws_board_rev = 6;
- }
- } else if (visws_board_type == VISWS_540) {
- visws_board_rev = 2;
- } else {
- visws_board_rev = raw;
- }
-
- printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
- (visws_board_type == VISWS_320 ? "320" :
- (visws_board_type == VISWS_540 ? "540" :
- "unknown")), visws_board_rev);
-}
+++ /dev/null
-/* VISWS traps */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-
-#include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/arch_hooks.h>
-#include <asm/visws/cobalt.h>
-#include <asm/visws/lithium.h>
-
-
-#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
-#define BCD (LI_INTB | LI_INTC | LI_INTD)
-#define ALLDEVS (A01234 | BCD)
-
-static __init void lithium_init(void)
-{
- set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
- set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
-
- if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
- printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
-/* panic("This machine is not SGI Visual Workstation 320/540"); */
- }
-
- if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
- printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
-/* panic("This machine is not SGI Visual Workstation 320/540"); */
- }
-
- li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
- li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
-}
-
-static __init void cobalt_init(void)
-{
- /*
- * On normal SMP PC this is used only with SMP, but we have to
- * use it and set it up here to start the Cobalt clock
- */
- set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
- setup_local_APIC();
- printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
- (unsigned int)apic_read(APIC_LVR),
- (unsigned int)apic_read(APIC_ID));
-
- set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
- set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
- printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
- co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
-
- /* Enable Cobalt APIC being careful to NOT change the ID! */
- co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
-
- printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
- co_apic_read(CO_APIC_ID));
-}
-
-int __init visws_trap_init_quirk(void)
-{
- lithium_init();
- cobalt_init();
-
- return 1;
-}
+++ /dev/null
-/*
- * Copyright (C) 1999 Bent Hagemark, Ingo Molnar
- *
- * SGI Visual Workstation interrupt controller
- *
- * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
- * which serves as the main interrupt controller in the system. Non-legacy
- * hardware in the system uses this controller directly. Legacy devices
- * are connected to the PIIX4 which in turn has its 8259(s) connected to
- * a of the Cobalt APIC entry.
- *
- * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
- *
- * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
- */
-
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-#include <asm/irq_vectors.h>
-#include <asm/visws/cobalt.h>
-
-static DEFINE_SPINLOCK(cobalt_lock);
-
-/*
- * Set the given Cobalt APIC Redirection Table entry to point
- * to the given IDT vector/index.
- */
-static inline void co_apic_set(int entry, int irq)
-{
- co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
- co_apic_write(CO_APIC_HI(entry), 0);
-}
-
-/*
- * Cobalt (IO)-APIC functions to handle PCI devices.
- */
-static inline int co_apic_ide0_hack(void)
-{
- extern char visws_board_type;
- extern char visws_board_rev;
-
- if (visws_board_type == VISWS_320 && visws_board_rev == 5)
- return 5;
- return CO_APIC_IDE0;
-}
-
-static int is_co_apic(unsigned int irq)
-{
- if (IS_CO_APIC(irq))
- return CO_APIC(irq);
-
- switch (irq) {
- case 0: return CO_APIC_CPU;
- case CO_IRQ_IDE0: return co_apic_ide0_hack();
- case CO_IRQ_IDE1: return CO_APIC_IDE1;
- default: return -1;
- }
-}
-
-
-/*
- * This is the SGI Cobalt (IO-)APIC:
- */
-
-static void enable_cobalt_irq(unsigned int irq)
-{
- co_apic_set(is_co_apic(irq), irq);
-}
-
-static void disable_cobalt_irq(unsigned int irq)
-{
- int entry = is_co_apic(irq);
-
- co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
- co_apic_read(CO_APIC_LO(entry));
-}
-
-/*
- * "irq" really just serves to identify the device. Here is where we
- * map this to the Cobalt APIC entry where it's physically wired.
- * This is called via request_irq -> setup_irq -> irq_desc->startup()
- */
-static unsigned int startup_cobalt_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- if ((irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING)))
- irq_desc[irq].status &= ~(IRQ_DISABLED | IRQ_INPROGRESS | IRQ_WAITING);
- enable_cobalt_irq(irq);
- spin_unlock_irqrestore(&cobalt_lock, flags);
- return 0;
-}
-
-static void ack_cobalt_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- disable_cobalt_irq(irq);
- apic_write(APIC_EOI, APIC_EIO_ACK);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static void end_cobalt_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_cobalt_irq(irq);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip cobalt_irq_type = {
- .typename = "Cobalt-APIC",
- .startup = startup_cobalt_irq,
- .shutdown = disable_cobalt_irq,
- .enable = enable_cobalt_irq,
- .disable = disable_cobalt_irq,
- .ack = ack_cobalt_irq,
- .end = end_cobalt_irq,
-};
-
-
-/*
- * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
- * -- not the manner expected by the code in i8259.c.
- *
- * there is a 'master' physical interrupt source that gets sent to
- * the CPU. But in the chipset there are various 'virtual' interrupts
- * waiting to be handled. We represent this to Linux through a 'master'
- * interrupt controller type, and through a special virtual interrupt-
- * controller. Device drivers only see the virtual interrupt sources.
- */
-static unsigned int startup_piix4_master_irq(unsigned int irq)
-{
- init_8259A(0);
-
- return startup_cobalt_irq(irq);
-}
-
-static void end_piix4_master_irq(unsigned int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- enable_cobalt_irq(irq);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip piix4_master_irq_type = {
- .typename = "PIIX4-master",
- .startup = startup_piix4_master_irq,
- .ack = ack_cobalt_irq,
- .end = end_piix4_master_irq,
-};
-
-
-static struct irq_chip piix4_virtual_irq_type = {
- .typename = "PIIX4-virtual",
- .shutdown = disable_8259A_irq,
- .enable = enable_8259A_irq,
- .disable = disable_8259A_irq,
-};
-
-
-/*
- * PIIX4-8259 master/virtual functions to handle interrupt requests
- * from legacy devices: floppy, parallel, serial, rtc.
- *
- * None of these get Cobalt APIC entries, neither do they have IDT
- * entries. These interrupts are purely virtual and distributed from
- * the 'master' interrupt source: CO_IRQ_8259.
- *
- * When the 8259 interrupts its handler figures out which of these
- * devices is interrupting and dispatches to its handler.
- *
- * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
- * enable_irq gets the right irq. This 'master' irq is never directly
- * manipulated by any driver.
- */
-static irqreturn_t piix4_master_intr(int irq, void *dev_id)
-{
- int realirq;
- irq_desc_t *desc;
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
-
- /* Find out what's interrupting in the PIIX4 master 8259 */
- outb(0x0c, 0x20); /* OCW3 Poll command */
- realirq = inb(0x20);
-
- /*
- * Bit 7 == 0 means invalid/spurious
- */
- if (unlikely(!(realirq & 0x80)))
- goto out_unlock;
-
- realirq &= 7;
-
- if (unlikely(realirq == 2)) {
- outb(0x0c, 0xa0);
- realirq = inb(0xa0);
-
- if (unlikely(!(realirq & 0x80)))
- goto out_unlock;
-
- realirq = (realirq & 7) + 8;
- }
-
- /* mask and ack interrupt */
- cached_irq_mask |= 1 << realirq;
- if (unlikely(realirq > 7)) {
- inb(0xa1);
- outb(cached_slave_mask, 0xa1);
- outb(0x60 + (realirq & 7), 0xa0);
- outb(0x60 + 2, 0x20);
- } else {
- inb(0x21);
- outb(cached_master_mask, 0x21);
- outb(0x60 + realirq, 0x20);
- }
-
- spin_unlock_irqrestore(&i8259A_lock, flags);
-
- desc = irq_desc + realirq;
-
- /*
- * handle this 'virtual interrupt' as a Cobalt one now.
- */
- kstat_cpu(smp_processor_id()).irqs[realirq]++;
-
- if (likely(desc->action != NULL))
- handle_IRQ_event(realirq, desc->action);
-
- if (!(desc->status & IRQ_DISABLED))
- enable_8259A_irq(realirq);
-
- return IRQ_HANDLED;
-
-out_unlock:
- spin_unlock_irqrestore(&i8259A_lock, flags);
- return IRQ_NONE;
-}
-
-static struct irqaction master_action = {
- .handler = piix4_master_intr,
- .name = "PIIX4-8259",
-};
-
-static struct irqaction cascade_action = {
- .handler = no_action,
- .name = "cascade",
-};
-
-
-void init_VISWS_APIC_irqs(void)
-{
- int i;
-
- for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = 0;
- irq_desc[i].depth = 1;
-
- if (i == 0) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- else if (i == CO_IRQ_IDE0) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- else if (i == CO_IRQ_IDE1) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- else if (i == CO_IRQ_8259) {
- irq_desc[i].chip = &piix4_master_irq_type;
- }
- else if (i < CO_IRQ_APIC0) {
- irq_desc[i].chip = &piix4_virtual_irq_type;
- }
- else if (IS_CO_APIC(i)) {
- irq_desc[i].chip = &cobalt_irq_type;
- }
- }
-
- setup_irq(CO_IRQ_8259, &master_action);
- setup_irq(2, &cascade_action);
-}
pci-$(CONFIG_ACPI) += acpi.o
pci-y += legacy.o irq.o
-# Careful: VISWS overrule the pci-y above. The colons are
-# therefor correct. This needs a proper fix by distangling the code.
pci-$(CONFIG_X86_VISWS) += visws.o
pci-$(CONFIG_X86_NUMAQ) += numa.o
git.openpandora.org / pandora-kernel.git / commitdiff