OMAP3: beagle: add support for beagleboard xM revision C

OMAP3: beagle: add support for beagleboard xM revision C

The USB enable GPIO has been in beagleboard xM revision C.
The USER button has been moved since beagleboard xM.
Also, board specific initialization has been moved to beagle_config struct
and initialized in omap3_beagle_init_rev. Default values in struct are for xMC.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 2d8dfb3..78cf5f2 100644 (file)
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -60,7 +60,8 @@
  *     AXBX    = GPIO173, GPIO172, GPIO171: 1 1 1
  *     C1_3    = GPIO173, GPIO172, GPIO171: 1 1 0
  *     C4      = GPIO173, GPIO172, GPIO171: 1 0 1
- *     XM      = GPIO173, GPIO172, GPIO171: 0 0 0
+ *     XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
+ *     XMC = GPIO173, GPIO172, GPIO171: 0 1 0
  */
 enum {
        OMAP3BEAGLE_BOARD_UNKN = 0,
@@ -68,14 +69,26 @@ enum {
        OMAP3BEAGLE_BOARD_C1_3,
        OMAP3BEAGLE_BOARD_C4,
        OMAP3BEAGLE_BOARD_XM,
+       OMAP3BEAGLE_BOARD_XMC,
 };
 
 static u8 omap3_beagle_version;
 
-static u8 omap3_beagle_get_rev(void)
-{
-       return omap3_beagle_version;
-}
+/*
+ * Board-specific configuration
+ * Defaults to BeagleBoard-xMC
+ */
+static struct {
+       int mmc1_gpio_wp;
+       int usb_pwr_level;
+       int reset_gpio;
+       int usr_button_gpio;
+} beagle_config = {
+       .mmc1_gpio_wp = -EINVAL,
+       .usb_pwr_level = GPIOF_OUT_INIT_LOW,
+       .reset_gpio = 129,
+       .usr_button_gpio = 4,
+};
 
 static struct gpio omap3_beagle_rev_gpios[] __initdata = {
        { 171, GPIOF_IN, "rev_id_0"    },
@@ -110,18 +123,32 @@ static void __init omap3_beagle_init_rev(void)
        case 7:
                printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
                omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
+               beagle_config.mmc1_gpio_wp = 29;
+               beagle_config.reset_gpio = 170;
+               beagle_config.usr_button_gpio = 7;
                break;
        case 6:
                printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
                omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
+               beagle_config.mmc1_gpio_wp = 23;
+               beagle_config.reset_gpio = 170;
+               beagle_config.usr_button_gpio = 7;
                break;
        case 5:
                printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
                omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+               beagle_config.mmc1_gpio_wp = 23;
+               beagle_config.reset_gpio = 170;
+               beagle_config.usr_button_gpio = 7;
                break;
        case 0:
-               printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+               printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
                omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+               beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+               break;
+       case 2:
+               printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
+               omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
                break;
        default:
                printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
@@ -234,7 +261,7 @@ static struct omap2_hsmmc_info mmc[] = {
        {
                .mmc            = 1,
                .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-               .gpio_wp        = 29,
+               .gpio_wp        = -EINVAL,
        },
        {}      /* Terminator */
 };
@@ -252,17 +279,11 @@ static struct gpio_led gpio_leds[];
 static int beagle_twl_gpio_setup(struct device *dev,
                unsigned gpio, unsigned ngpio)
 {
-       int r, usb_pwr_level;
-
-       if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
-               mmc[0].gpio_wp = -EINVAL;
-       } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
-               (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
-               omap_mux_init_gpio(23, OMAP_PIN_INPUT);
-               mmc[0].gpio_wp = 23;
-       } else {
-               omap_mux_init_gpio(29, OMAP_PIN_INPUT);
-       }
+       int r;
+
+       if (beagle_config.mmc1_gpio_wp != -EINVAL)
+               omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+       mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
        /* gpio + 0 is "mmc0_cd" (input/IRQ) */
        mmc[0].gpio_cd = gpio + 0;
        omap2_hsmmc_init(mmc);
@@ -272,9 +293,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
         * high / others active low)
         * DVI reset GPIO is different between beagle revisions
         */
-       if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
-               usb_pwr_level = GPIOF_OUT_INIT_HIGH;
-               beagle_dvi_device.reset_gpio = 129;
+       /* Valid for all -xM revisions */
+       if (cpu_is_omap3630()) {
                /*
                 * gpio + 1 on Xm controls the TFP410's enable line (active low)
                 * gpio + 2 control varies depending on the board rev as below:
@@ -292,8 +312,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
                        pr_err("%s: unable to configure DVI_LDO_EN\n",
                                __func__);
        } else {
-               usb_pwr_level = GPIOF_OUT_INIT_LOW;
-               beagle_dvi_device.reset_gpio = 170;
                /*
                 * REVISIT: need ehci-omap hooks for external VBUS
                 * power switch and overcurrent detect
@@ -301,8 +319,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
                if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
                        pr_err("%s: unable to configure EHCI_nOC\n", __func__);
        }
+       beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
 
-       gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR");
+       gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
+                       "nEN_USB_PWR");
 
        /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
        gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -454,7 +474,8 @@ static struct platform_device leds_gpio = {
 static struct gpio_keys_button gpio_buttons[] = {
        {
                .code                   = BTN_EXTRA,
-               .gpio                   = 7,
+               /* Dynamically assigned depending on board */
+               .gpio                   = -EINVAL,
                .desc                   = "user",
                .wakeup                 = 1,
        },
@@ -518,8 +539,8 @@ static void __init beagle_opp_init(void)
                return;
        }
 
-       /* Custom OPP enabled for XM */
-       if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+       /* Custom OPP enabled for all xM versions */
+       if (cpu_is_omap3630()) {
                struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
                struct omap_hwmod *dh = omap_hwmod_lookup("iva");
                struct device *dev;
@@ -559,6 +580,9 @@ static void __init omap3_beagle_init(void)
        omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
        omap3_beagle_init_rev();
        omap3_beagle_i2c_init();
+
+       gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
+
        platform_add_devices(omap3_beagle_devices,
                        ARRAY_SIZE(omap3_beagle_devices));
        omap_display_init(&beagle_dss_data);