e1000e: 82566DC fails to get link

Two recent patches to cleanup the reset[1] and initial PHY configuration[2]
code paths for ICH/PCH devices inadvertently left out a 10msec delay and
device ID check respectively which are necessary for the 82566DC (device id
0x104b) to be configured properly, otherwise it will not get link.

[1] commit e98cac447cc1cc418dff1d610a5c79c4f2bdec7f
[2] commit 3f0c16e84438d657d29446f85fe375794a93f159

CC: stable@kernel.org
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index fc8c3ce..6f9cb0d 100644 (file)
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -932,7 +932,6 @@ out:
  **/
 static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 {
-       struct e1000_adapter *adapter = hw->adapter;
        struct e1000_phy_info *phy = &hw->phy;
        u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
        s32 ret_val = 0;
@@ -950,7 +949,8 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
                if (phy->type != e1000_phy_igp_3)
                        return ret_val;
 
-               if (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) {
+               if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) ||
+                   (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) {
                        sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
                        break;
                }
@@ -1626,6 +1626,9 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
        if (e1000_check_reset_block(hw))
                goto out;
 
+       /* Allow time for h/w to get to quiescent state after reset */
+       msleep(10);
+
        /* Perform any necessary post-reset workarounds */
        switch (hw->mac.type) {
        case e1000_pchlan: