[libata] pata_ixp4xx: convert to new EH
authorAlessandro Zummo <a.zummo@towertech.it>
Sat, 26 May 2007 23:26:55 +0000 (19:26 -0400)
committerJeff Garzik <jeff@garzik.org>
Mon, 9 Jul 2007 16:17:33 +0000 (12:17 -0400)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/ata/pata_ixp4xx_cf.c

index 887bbaa..7633210 100644 (file)
@@ -1,13 +1,14 @@
 /*
  * ixp4xx PATA/Compact Flash driver
- * Copyright (c) 2006 Tower Technologies
+ * Copyright (C) 2006-07 Tower Technologies
  * Author: Alessandro Zummo <a.zummo@towertech.it>
  *
  * An ATA driver to handle a Compact Flash connected
  * to the ixp4xx expansion bus in TrueIDE mode. The CF
  * must have it chip selects connected to two CS lines
- * on the ixp4xx. The interrupt line is optional, if not
- * specified the driver will run in polling mode.
+ * on the ixp4xx. In the irq is not available, you might
+ * want to modify both this driver and libata to run in
+ * polling mode.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -23,7 +24,7 @@
 #include <scsi/scsi_host.h>
 
 #define DRV_NAME       "pata_ixp4xx_cf"
-#define DRV_VERSION    "0.1.3"
+#define DRV_VERSION    "0.2"
 
 static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
 {
@@ -42,13 +43,6 @@ static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
        return 0;
 }
 
-static void ixp4xx_phy_reset(struct ata_port *ap)
-{
-       ap->cbl = ATA_CBL_PATA40;
-       ata_port_probe(ap);
-       ata_bus_reset(ap);
-}
-
 static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
                                unsigned int buflen, int write_data)
 {
@@ -92,10 +86,6 @@ static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
        *data->cs0_cfg |= 0x01;
 }
 
-static void ixp4xx_irq_clear(struct ata_port *ap)
-{
-}
-
 static struct scsi_host_template ixp4xx_sht = {
        .module                 = THIS_MODULE,
        .name                   = DRV_NAME,
@@ -115,29 +105,32 @@ static struct scsi_host_template ixp4xx_sht = {
 };
 
 static struct ata_port_operations ixp4xx_port_ops = {
-       .set_mode       = ixp4xx_set_mode,
-       .mode_filter    = ata_pci_default_filter,
-
-       .port_disable   = ata_port_disable,
-       .tf_load        = ata_tf_load,
-       .tf_read        = ata_tf_read,
-       .check_status   = ata_check_status,
-       .exec_command   = ata_exec_command,
-       .dev_select     = ata_std_dev_select,
-
-       .qc_prep        = ata_qc_prep,
-       .qc_issue       = ata_qc_issue_prot,
-       .eng_timeout    = ata_eng_timeout,
-       .data_xfer      = ixp4xx_mmio_data_xfer,
-       .cable_detect   = ata_cable_40wire,
-
-       .irq_clear      = ixp4xx_irq_clear,
-       .irq_on         = ata_irq_on,
-       .irq_ack        = ata_irq_ack,
-
-       .port_start     = ata_port_start,
-
-       .phy_reset      = ixp4xx_phy_reset,
+       .set_mode               = ixp4xx_set_mode,
+       .mode_filter            = ata_pci_default_filter,
+
+       .port_disable           = ata_port_disable,
+       .tf_load                = ata_tf_load,
+       .tf_read                = ata_tf_read,
+       .exec_command           = ata_exec_command,
+       .check_status           = ata_check_status,
+       .dev_select             = ata_std_dev_select,
+
+       .freeze                 = ata_bmdma_freeze,
+       .thaw                   = ata_bmdma_thaw,
+       .error_handler          = ata_bmdma_error_handler,
+       .post_internal_cmd      = ata_bmdma_post_internal_cmd,
+
+       .qc_prep                = ata_qc_prep,
+       .qc_issue               = ata_qc_issue_prot,
+       .data_xfer              = ixp4xx_mmio_data_xfer,
+       .cable_detect           = ata_cable_40wire,
+
+       .irq_handler            = ata_interrupt,
+       .irq_clear              = ata_bmdma_irq_clear,
+       .irq_on                 = ata_irq_on,
+       .irq_ack                = ata_dummy_irq_ack,
+
+       .port_start             = ata_port_start,
 };
 
 static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
@@ -211,10 +204,6 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
        ap->pio_mask = 0x1f; /* PIO4 */
        ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
 
-       /* run in polling mode if no irq has been assigned */
-       if (!irq)
-               ap->flags |= ATA_FLAG_PIO_POLLING;
-
        ixp4xx_setup_port(&ap->ioaddr, data);
 
        dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");