hamachi/yellowfin: Move the packet engine drivers

Move the packet engine drivers to drivers/net/ethernet/packetengines/
and the necessary Kconfig and Makefile changes.

CC: Donald Becker <becker@scyld.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e8d65fe..99b209e 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -541,32 +541,6 @@ config IP1000
          To compile this driver as a module, choose M here: the module
          will be called ipg.  This is recommended.
 
-config HAMACHI
-       tristate "Packet Engines Hamachi GNIC-II support"
-       depends on PCI
-       select MII
-       help
-         If you have a Gigabit Ethernet card of this type, say Y and read
-         the Ethernet-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         To compile this driver as a module, choose M here. The module will be
-         called hamachi.
-
-config YELLOWFIN
-       tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
-       depends on PCI && EXPERIMENTAL
-       select CRC32
-       ---help---
-         Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
-         adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
-         used by the Beowulf Linux cluster project.  See
-         <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
-         information about this driver in particular and Beowulf in general.
-
-         To compile this driver as a module, choose M here: the module
-         will be called yellowfin.  This is recommended.
-
 config XILINX_LL_TEMAC
        tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
        depends on PPC || MICROBLAZE

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 96112dd..d8c286e 100644 (file)
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_PLIP) += plip.o
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
 
 obj-$(CONFIG_R6040) += r6040.o
-obj-$(CONFIG_YELLOWFIN) += yellowfin.o
 obj-$(CONFIG_FEALNX) += fealnx.o
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
@@ -30,7 +29,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
 # end link order section
 #
 
-obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_NET_SB1000) += sb1000.o
 obj-$(CONFIG_HP100) += hp100.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 3983e70..140dd73 100644 (file)
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -39,6 +39,7 @@ source "drivers/net/ethernet/natsemi/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/nuvoton/Kconfig"
 source "drivers/net/ethernet/oki-semi/Kconfig"
+source "drivers/net/ethernet/packetengines/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 873d275..8a97b19 100644 (file)
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
 obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
 obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
 obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
+obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
 obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/

diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
new file mode 100644 (file)
index 0000000..4add1db
--- /dev/null
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -0,0 +1,46 @@
+#
+# Packet engine device configuration
+#
+
+config NET_PACKET_ENGINE
+       bool "Packet Engine devices"
+       depends on PCI
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y
+         and read the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about packet engine devices. If you say Y, you will
+         be asked for your specific card in the following questions.
+
+if NET_PACKET_ENGINE
+
+config HAMACHI
+       tristate "Packet Engines Hamachi GNIC-II support"
+       depends on PCI
+       select MII
+       ---help---
+         If you have a Gigabit Ethernet card of this type, say Y and read
+         the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         To compile this driver as a module, choose M here. The module will be
+         called hamachi.
+
+config YELLOWFIN
+       tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
+       depends on PCI && EXPERIMENTAL
+       select CRC32
+       ---help---
+         Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
+         adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
+         used by the Beowulf Linux cluster project.  See
+         <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
+         information about this driver in particular and Beowulf in general.
+
+         To compile this driver as a module, choose M here: the module
+         will be called yellowfin.  This is recommended.
+
+endif # NET_PACKET_ENGINE

diff --git a/drivers/net/ethernet/packetengines/Makefile b/drivers/net/ethernet/packetengines/Makefile
new file mode 100644 (file)
index 0000000..995ccd0
--- /dev/null
+++ b/drivers/net/ethernet/packetengines/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Packet Engine network device drivers.
+#
+
+obj-$(CONFIG_HAMACHI) += hamachi.o
+obj-$(CONFIG_YELLOWFIN) += yellowfin.o

diff --git a/drivers/net/hamachi.c b/drivers/net/ethernet/packetengines/hamachi.c
similarity index 100%
rename from drivers/net/hamachi.c
rename to drivers/net/ethernet/packetengines/hamachi.c

diff --git a/drivers/net/yellowfin.c b/drivers/net/ethernet/packetengines/yellowfin.c
similarity index 100%
rename from drivers/net/yellowfin.c
rename to drivers/net/ethernet/packetengines/yellowfin.c