mmc: sdhci-s3c: add platform_8bit_width() hook
authorJaehoon Chung <jh80.chung@samsung.com>
Wed, 12 Jan 2011 02:59:12 +0000 (11:59 +0900)
committerChris Ball <cjb@laptop.org>
Wed, 26 Jan 2011 05:27:57 +0000 (00:27 -0500)
We have 8-bit width support but is not a v3 controller.
So we need platform_8bit_width() to support 8-bit buswidth.
Also we need MMC_CAP_8_BIT_DATA, so we add it in platdata.

This gets 8-bit support working again on s3c, after we previously
disabled 8-bit by default on non-v3 controllers.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
drivers/mmc/host/sdhci-s3c.c

index 1720358..5309ab9 100644 (file)
@@ -277,10 +277,43 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
        host->clock = clock;
 }
 
+/**
+ * sdhci_s3c_platform_8bit_width - support 8bit buswidth
+ * @host: The SDHCI host being queried
+ * @width: MMC_BUS_WIDTH_ macro for the bus width being requested
+ *
+ * We have 8-bit width support but is not a v3 controller.
+ * So we add platform_8bit_width() and support 8bit width.
+ */
+static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
+{
+       u8 ctrl;
+
+       ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+
+       switch (width) {
+       case MMC_BUS_WIDTH_8:
+               ctrl |= SDHCI_CTRL_8BITBUS;
+               ctrl &= ~SDHCI_CTRL_4BITBUS;
+               break;
+       case MMC_BUS_WIDTH_4:
+               ctrl |= SDHCI_CTRL_4BITBUS;
+               ctrl &= ~SDHCI_CTRL_8BITBUS;
+               break;
+       default:
+               break;
+       }
+
+       sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+
+       return 0;
+}
+
 static struct sdhci_ops sdhci_s3c_ops = {
        .get_max_clock          = sdhci_s3c_get_max_clk,
        .set_clock              = sdhci_s3c_set_clock,
        .get_min_clock          = sdhci_s3c_get_min_clock,
+       .platform_8bit_width    = sdhci_s3c_platform_8bit_width,
 };
 
 static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
@@ -473,6 +506,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
        if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
                host->mmc->caps = MMC_CAP_NONREMOVABLE;
 
+       if (pdata->host_caps)
+               host->mmc->caps |= pdata->host_caps;
+
        host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
                         SDHCI_QUIRK_32BIT_DMA_SIZE);