wl1271-objs = wl1271_main.o wl1271_spi.o wl1271_cmd.o \
wl1271_event.o wl1271_tx.o wl1271_rx.o \
wl1271_ps.o wl1271_acx.o wl1271_boot.o \
- wl1271_init.o wl1271_debugfs.o
+ wl1271_init.o wl1271_debugfs.o wl1271_io.o
+
wl1271-$(CONFIG_NL80211_TESTMODE) += wl1271_testmode.o
obj-$(CONFIG_WL1271) += wl1271.o
--- /dev/null
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl1271.h"
+#include "wl12xx_80211.h"
+#include "wl1271_spi.h"
+#include "wl1271_io.h"
+
+static int wl1271_translate_addr(struct wl1271 *wl, int addr)
+{
+ /*
+ * To translate, first check to which window of addresses the
+ * particular address belongs. Then subtract the starting address
+ * of that window from the address. Then, add offset of the
+ * translated region.
+ *
+ * The translated regions occur next to each other in physical device
+ * memory, so just add the sizes of the preceeding address regions to
+ * get the offset to the new region.
+ *
+ * Currently, only the two first regions are addressed, and the
+ * assumption is that all addresses will fall into either of those
+ * two.
+ */
+ if ((addr >= wl->part.reg.start) &&
+ (addr < wl->part.reg.start + wl->part.reg.size))
+ return addr - wl->part.reg.start + wl->part.mem.size;
+ else
+ return addr - wl->part.mem.start;
+}
+
+/* Set the SPI partitions to access the chip addresses
+ *
+ * To simplify driver code, a fixed (virtual) memory map is defined for
+ * register and memory addresses. Because in the chipset, in different stages
+ * of operation, those addresses will move around, an address translation
+ * mechanism is required.
+ *
+ * There are four partitions (three memory and one register partition),
+ * which are mapped to two different areas of the hardware memory.
+ *
+ * Virtual address
+ * space
+ *
+ * | |
+ * ...+----+--> mem.start
+ * Physical address ... | |
+ * space ... | | [PART_0]
+ * ... | |
+ * 00000000 <--+----+... ...+----+--> mem.start + mem.size
+ * | | ... | |
+ * |MEM | ... | |
+ * | | ... | |
+ * mem.size <--+----+... | | {unused area)
+ * | | ... | |
+ * |REG | ... | |
+ * mem.size | | ... | |
+ * + <--+----+... ...+----+--> reg.start
+ * reg.size | | ... | |
+ * |MEM2| ... | | [PART_1]
+ * | | ... | |
+ * ...+----+--> reg.start + reg.size
+ * | |
+ *
+ */
+int wl1271_set_partition(struct wl1271 *wl,
+ struct wl1271_partition_set *p)
+{
+ /* copy partition info */
+ memcpy(&wl->part, p, sizeof(*p));
+
+ wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ p->mem.start, p->mem.size);
+ wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ p->reg.start, p->reg.size);
+ wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X",
+ p->mem2.start, p->mem2.size);
+ wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X",
+ p->mem3.start, p->mem3.size);
+
+ /* write partition info to the chipset */
+ wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
+ wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
+ wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
+ wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
+ wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
+ wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
+ wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
+
+ return 0;
+}
+
+void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
+ size_t len, bool fixed)
+{
+ wl1271_spi_raw_write(wl, addr, buf, len, fixed);
+}
+
+void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
+ size_t len, bool fixed)
+{
+ wl1271_spi_read(wl, addr, buf, len, fixed);
+}
+
+void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
+ bool fixed)
+{
+ int physical;
+
+ physical = wl1271_translate_addr(wl, addr);
+
+ wl1271_spi_raw_read(wl, physical, buf, len, fixed);
+}
+
+void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
+ bool fixed)
+{
+ int physical;
+
+ physical = wl1271_translate_addr(wl, addr);
+
+ wl1271_spi_raw_write(wl, physical, buf, len, fixed);
+}
+
+u32 wl1271_spi_read32(struct wl1271 *wl, int addr)
+{
+ return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
+}
+
+void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val)
+{
+ wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
+}
+
+void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
+{
+ /* write address >> 1 + 0x30000 to OCP_POR_CTR */
+ addr = (addr >> 1) + 0x30000;
+ wl1271_spi_write32(wl, OCP_POR_CTR, addr);
+
+ /* write value to OCP_POR_WDATA */
+ wl1271_spi_write32(wl, OCP_DATA_WRITE, val);
+
+ /* write 1 to OCP_CMD */
+ wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_WRITE);
+}
+
+u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
+{
+ u32 val;
+ int timeout = OCP_CMD_LOOP;
+
+ /* write address >> 1 + 0x30000 to OCP_POR_CTR */
+ addr = (addr >> 1) + 0x30000;
+ wl1271_spi_write32(wl, OCP_POR_CTR, addr);
+
+ /* write 2 to OCP_CMD */
+ wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_READ);
+
+ /* poll for data ready */
+ do {
+ val = wl1271_spi_read32(wl, OCP_DATA_READ);
+ } while (!(val & OCP_READY_MASK) && --timeout);
+
+ if (!timeout) {
+ wl1271_warning("Top register access timed out.");
+ return 0xffff;
+ }
+
+ /* check data status and return if OK */
+ if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
+ return val & 0xffff;
+ else {
+ wl1271_warning("Top register access returned error.");
+ return 0xffff;
+ }
+}
+
--- /dev/null
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_IO_H__
+#define __WL1271_IO_H__
+
+struct wl1271;
+
+
+/* Raw target IO, address is not translated */
+void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
+ size_t len, bool fixed);
+void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
+ size_t len, bool fixed);
+
+#endif
#include "wl12xx_80211.h"
#include "wl1271_spi.h"
-static int wl1271_translate_addr(struct wl1271 *wl, int addr)
-{
- /*
- * To translate, first check to which window of addresses the
- * particular address belongs. Then subtract the starting address
- * of that window from the address. Then, add offset of the
- * translated region.
- *
- * The translated regions occur next to each other in physical device
- * memory, so just add the sizes of the preceeding address regions to
- * get the offset to the new region.
- *
- * Currently, only the two first regions are addressed, and the
- * assumption is that all addresses will fall into either of those
- * two.
- */
- if ((addr >= wl->part.reg.start) &&
- (addr < wl->part.reg.start + wl->part.reg.size))
- return addr - wl->part.reg.start + wl->part.mem.size;
- else
- return addr - wl->part.mem.start;
-}
void wl1271_spi_reset(struct wl1271 *wl)
{
wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
}
-/* Set the SPI partitions to access the chip addresses
- *
- * To simplify driver code, a fixed (virtual) memory map is defined for
- * register and memory addresses. Because in the chipset, in different stages
- * of operation, those addresses will move around, an address translation
- * mechanism is required.
- *
- * There are four partitions (three memory and one register partition),
- * which are mapped to two different areas of the hardware memory.
- *
- * Virtual address
- * space
- *
- * | |
- * ...+----+--> mem.start
- * Physical address ... | |
- * space ... | | [PART_0]
- * ... | |
- * 00000000 <--+----+... ...+----+--> mem.start + mem.size
- * | | ... | |
- * |MEM | ... | |
- * | | ... | |
- * mem.size <--+----+... | | {unused area)
- * | | ... | |
- * |REG | ... | |
- * mem.size | | ... | |
- * + <--+----+... ...+----+--> reg.start
- * reg.size | | ... | |
- * |MEM2| ... | | [PART_1]
- * | | ... | |
- * ...+----+--> reg.start + reg.size
- * | |
- *
- */
-int wl1271_set_partition(struct wl1271 *wl,
- struct wl1271_partition_set *p)
-{
- /* copy partition info */
- memcpy(&wl->part, p, sizeof(*p));
-
- wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- p->mem.start, p->mem.size);
- wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- p->reg.start, p->reg.size);
- wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X",
- p->mem2.start, p->mem2.size);
- wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X",
- p->mem3.start, p->mem3.size);
-
- /* write partition info to the chipset */
- wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
- wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
- wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
- wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
- wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
- wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
- wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
-
- return 0;
-}
-
#define WL1271_BUSY_WORD_TIMEOUT 1000
/* FIXME: Check busy words, removed due to SPI bug */
wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
}
-
-void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
- bool fixed)
-{
- int physical;
-
- physical = wl1271_translate_addr(wl, addr);
-
- wl1271_spi_raw_read(wl, physical, buf, len, fixed);
-}
-
-void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
- bool fixed)
-{
- int physical;
-
- physical = wl1271_translate_addr(wl, addr);
-
- wl1271_spi_raw_write(wl, physical, buf, len, fixed);
-}
-
-u32 wl1271_spi_read32(struct wl1271 *wl, int addr)
-{
- return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
-}
-
-void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val)
-{
- wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
-}
-
-void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
-{
- /* write address >> 1 + 0x30000 to OCP_POR_CTR */
- addr = (addr >> 1) + 0x30000;
- wl1271_spi_write32(wl, OCP_POR_CTR, addr);
-
- /* write value to OCP_POR_WDATA */
- wl1271_spi_write32(wl, OCP_DATA_WRITE, val);
-
- /* write 1 to OCP_CMD */
- wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_WRITE);
-}
-
-u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
-{
- u32 val;
- int timeout = OCP_CMD_LOOP;
-
- /* write address >> 1 + 0x30000 to OCP_POR_CTR */
- addr = (addr >> 1) + 0x30000;
- wl1271_spi_write32(wl, OCP_POR_CTR, addr);
-
- /* write 2 to OCP_CMD */
- wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_READ);
-
- /* poll for data ready */
- do {
- val = wl1271_spi_read32(wl, OCP_DATA_READ);
- } while (!(val & OCP_READY_MASK) && --timeout);
-
- if (!timeout) {
- wl1271_warning("Top register access timed out.");
- return 0xffff;
- }
-
- /* check data status and return if OK */
- if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
- return val & 0xffff;
- else {
- wl1271_warning("Top register access returned error.");
- return 0xffff;
- }
-}
git.openpandora.org / pandora-kernel.git / commitdiff