x86: bitops take an unsigned long *

All (or most) other architectures do this.  So should x86.  Fix.

Cc: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h
index ee4b3ea..7d2494b 100644 (file)
--- a/include/asm-x86/bitops.h
+++ b/include/asm-x86/bitops.h
@@ -43,7 +43,7 @@
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void set_bit(int nr, volatile void *addr)
+static inline void set_bit(int nr, volatile unsigned long *addr)
 {
        asm volatile(LOCK_PREFIX "bts %1,%0" : ADDR : "Ir" (nr) : "memory");
 }
@@ -57,7 +57,7 @@ static inline void set_bit(int nr, volatile void *addr)
  * If it's called on the same region of memory simultaneously, the effect
  * may be that only one operation succeeds.
  */
-static inline void __set_bit(int nr, volatile void *addr)
+static inline void __set_bit(int nr, volatile unsigned long *addr)
 {
        asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory");
 }
@@ -72,7 +72,7 @@ static inline void __set_bit(int nr, volatile void *addr)
  * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
  * in order to ensure changes are visible on other processors.
  */
-static inline void clear_bit(int nr, volatile void *addr)
+static inline void clear_bit(int nr, volatile unsigned long *addr)
 {
        asm volatile(LOCK_PREFIX "btr %1,%0" : ADDR : "Ir" (nr));
 }
@@ -85,13 +85,13 @@ static inline void clear_bit(int nr, volatile void *addr)
  * clear_bit() is atomic and implies release semantics before the memory
  * operation. It can be used for an unlock.
  */
-static inline void clear_bit_unlock(unsigned nr, volatile void *addr)
+static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
 {
        barrier();
        clear_bit(nr, addr);
 }
 
-static inline void __clear_bit(int nr, volatile void *addr)
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
 {
        asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
 }
@@ -108,7 +108,7 @@ static inline void __clear_bit(int nr, volatile void *addr)
  * No memory barrier is required here, because x86 cannot reorder stores past
  * older loads. Same principle as spin_unlock.
  */
-static inline void __clear_bit_unlock(unsigned nr, volatile void *addr)
+static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
 {
        barrier();
        __clear_bit(nr, addr);
@@ -126,7 +126,7 @@ static inline void __clear_bit_unlock(unsigned nr, volatile void *addr)
  * If it's called on the same region of memory simultaneously, the effect
  * may be that only one operation succeeds.
  */
-static inline void __change_bit(int nr, volatile void *addr)
+static inline void __change_bit(int nr, volatile unsigned long *addr)
 {
        asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
 }
@@ -140,7 +140,7 @@ static inline void __change_bit(int nr, volatile void *addr)
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void change_bit(int nr, volatile void *addr)
+static inline void change_bit(int nr, volatile unsigned long *addr)
 {
        asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr));
 }
@@ -153,7 +153,7 @@ static inline void change_bit(int nr, volatile void *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int test_and_set_bit(int nr, volatile void *addr)
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
 {
        int oldbit;
 
@@ -170,7 +170,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
  *
  * This is the same as test_and_set_bit on x86.
  */
-static inline int test_and_set_bit_lock(int nr, volatile void *addr)
+static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
 {
        return test_and_set_bit(nr, addr);
 }
@@ -184,7 +184,7 @@ static inline int test_and_set_bit_lock(int nr, volatile void *addr)
  * If two examples of this operation race, one can appear to succeed
  * but actually fail.  You must protect multiple accesses with a lock.
  */
-static inline int __test_and_set_bit(int nr, volatile void *addr)
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
 {
        int oldbit;
 
@@ -203,7 +203,7 @@ static inline int __test_and_set_bit(int nr, volatile void *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int test_and_clear_bit(int nr, volatile void *addr)
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
 {
        int oldbit;
 
@@ -223,7 +223,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr)
  * If two examples of this operation race, one can appear to succeed
  * but actually fail.  You must protect multiple accesses with a lock.
  */
-static inline int __test_and_clear_bit(int nr, volatile void *addr)
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
 {
        int oldbit;
 
@@ -235,7 +235,7 @@ static inline int __test_and_clear_bit(int nr, volatile void *addr)
 }
 
 /* WARNING: non atomic and it can be reordered! */
-static inline int __test_and_change_bit(int nr, volatile void *addr)
+static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
 {
        int oldbit;
 
@@ -255,7 +255,7 @@ static inline int __test_and_change_bit(int nr, volatile void *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int test_and_change_bit(int nr, volatile void *addr)
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 {
        int oldbit;
 
@@ -266,13 +266,13 @@ static inline int test_and_change_bit(int nr, volatile void *addr)
        return oldbit;
 }
 
-static inline int constant_test_bit(int nr, const volatile void *addr)
+static inline int constant_test_bit(int nr, const volatile unsigned long *addr)
 {
        return ((1UL << (nr % BITS_PER_LONG)) &
                (((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
 }
 
-static inline int variable_test_bit(int nr, volatile const void *addr)
+static inline int variable_test_bit(int nr, volatile const unsigned long *addr)
 {
        int oldbit;