Documentation: Update Phonet doc for Pipe Controller implementation

Updates the Phonet document with description related to Pipe controller
implementation

Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt
index cf76608..cccf5ff 100644 (file)
--- a/Documentation/networking/phonet.txt
+++ b/Documentation/networking/phonet.txt
@@ -182,6 +182,59 @@ The pipe protocol provides two socket options at the SOL_PNPIPE level:
     or zero if encapsulation is off.
 
 
+Phonet Pipe-controller Implementation
+-------------------------------------
+
+Phonet Pipe-controller is enabled by selecting the CONFIG_PHONET_PIPECTRLR Kconfig
+option. It is useful when communicating with those Nokia Modems which do not
+implement Pipe controller in them e.g. Nokia Slim Modem used in ST-Ericsson
+U8500 platform.
+
+The implementation is based on the Data Connection Establishment Sequence
+depicted in 'Nokia Wireless Modem API - Wireless_modem_user_guide.pdf'
+document.
+
+It allows a phonet sequenced socket (host-pep) to initiate a Pipe connection
+between itself and a remote pipe-end point (e.g. modem).
+
+The implementation adds socket options at SOL_PNPIPE level:
+
+ PNPIPE_CREATE
+       It accepts an integer argument where-in
+               lower order 16 bits: pn_dev and pn_port pair for remote pep.
+               higher order 16 bits: 8 bit pipe-handle
+
+       It sends a PNS_PEP_CONNECT_REQ on sequenced socket itself. On getting
+       PNS_PEP_CONNECT_RESP, it sends PNS_PEP_CONNECT_REQ to remote pep. On
+       getting response from remote pep, it selects the best possible Flow
+       control mechanism supported by remote-pep (modem) and then it sends
+       PNS_PEP_CREATED_IND to the sequenced socket and to the remote pep.
+
+       It then updates the pipe state associated with the sequenced socket to
+       be PIPE_DISABLED.
+
+  PNPIPE_ENABLE
+       It follows the same sequence as above for enabling a pipe by sending
+       PNS_PEP_ENABLE_REQ initially and then sending PNS_PEP_ENABLED_IND after
+       getting responses from sequenced socket and remote-pep.
+       It will also update the pipe state associated with the sequenced socket
+       to PIPE_ENABLED.
+
+   PNPIPE_DESTROY
+       This will send out PNS_PEP_DISCONNECT_REQ on the sequenced socket and
+       the remote pep.
+       It will also update the pipe state associated with the sequenced socket
+       to PIPE_IDLE
+
+   PNPIPE_INQ
+       This getsocktopt allows the user-space running on the sequenced socket
+       to examine the pipe state associated with that socket ie. whether the
+       pipe is created (PIPE_DISABLED) or enabled (PIPE_ENABLED) or disabled
+       (PIPE_DISABLED) or no pipe exists (PIPE_IDLE).
+
+After a pipe has been created and enabled successfully, the Pipe data can be
+exchanged between the host-pep and remote-pep (modem).
+
 Authors
 -------