ich6_sata = 7,
ich6_sata_ahci = 8,
ich6m_sata_ahci = 9,
- ich7m_sata_ahci = 10,
- ich8_sata_ahci = 11,
+ ich8_sata_ahci = 10,
/* constants for mapping table */
P0 = 0, /* port 0 */
#ifdef ATA_ENABLE_PATA
/* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
/* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
+ { 0x8086, 0x7110, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
{ 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
{ 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* 82801GB/GR/GH (ICH7, identical to ICH6) */
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
- { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci },
+ { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
/* Enterprise Southbridge 2 (where's the datasheet?) */
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
/* SATA Controller 1 IDE (ICH8, no datasheet yet) */
.mask = 0x3,
.port_enable = 0x5,
.present_shift = 4,
- .map = {
- /* PM PS SM SS MAP */
- { P0, P2, RV, RV }, /* 00b */
- { RV, RV, RV, RV },
- { P0, P2, IDE, IDE }, /* 10b */
- { RV, RV, RV, RV },
- },
-};
-
-static const struct piix_map_db ich7m_map_db = {
- .mask = 0x3,
- .port_enable = 0x5,
- .present_shift = 4,
/* Map 01b isn't specified in the doc but some notebooks use
- * it anyway. ATM, the only case spotted carries subsystem ID
- * 1025:0107. This is the only difference from ich6m.
+ * it anyway. MAP 01b have been spotted on both ICH6M and
+ * ICH7M.
*/
.map = {
/* PM PS SM SS MAP */
[ich6_sata] = &ich6_map_db,
[ich6_sata_ahci] = &ich6_map_db,
[ich6m_sata_ahci] = &ich6m_map_db,
- [ich7m_sata_ahci] = &ich7m_map_db,
[ich8_sata_ahci] = &ich8_map_db,
};
.port_ops = &piix_sata_ops,
},
- /* ich7m_sata_ahci: 10 */
- {
- .sht = &piix_sht,
- .flags = ATA_FLAG_SATA |
- PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
- PIIX_FLAG_AHCI,
- .pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = 0x7f, /* udma0-6 */
- .port_ops = &piix_sata_ops,
- },
-
- /* ich8_sata_ahci: 11 */
+ /* ich8_sata_ahci: 10 */
{
.sht = &piix_sht,
.flags = ATA_FLAG_SATA |
EXPORT_SYMBOL_GPL(ata_std_softreset);
EXPORT_SYMBOL_GPL(sata_std_hardreset);
EXPORT_SYMBOL_GPL(ata_std_postreset);
-EXPORT_SYMBOL_GPL(ata_dev_revalidate);
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_pair);
EXPORT_SYMBOL_GPL(ata_port_disable);
extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
int post_reset, u16 *id);
+extern int ata_dev_revalidate(struct ata_device *dev, int post_reset);
extern int ata_dev_configure(struct ata_device *dev, int print_info);
extern int sata_down_spd_limit(struct ata_port *ap);
extern int sata_set_spd_needed(struct ata_port *ap);
struct ata_probe_ent *probe_ent = NULL;
int rc;
u32 genctl;
- struct ata_port_info *ppi[2];
+ struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
int pci_dev_busy = 0;
u8 pmr;
u8 port2_start;
if (rc)
goto err_out_regions;
- ppi[0] = ppi[1] = &sis_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
- if (!probe_ent) {
- rc = -ENOMEM;
- goto err_out_regions;
- }
-
/* check and see if the SCRs are in IO space or PCI cfg space */
pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
- probe_ent->port_flags |= SIS_FLAG_CFGSCR;
+ pi.flags |= SIS_FLAG_CFGSCR;
/* if hardware thinks SCRs are in IO space, but there are
* no IO resources assigned, change to PCI cfg space.
*/
- if ((!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) &&
+ if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
(pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
genctl &= ~GENCTL_IOMAPPED_SCR;
pci_write_config_dword(pdev, SIS_GENCTL, genctl);
- probe_ent->port_flags |= SIS_FLAG_CFGSCR;
+ pi.flags |= SIS_FLAG_CFGSCR;
}
pci_read_config_byte(pdev, SIS_PMR, &pmr);
port2_start = 0x20;
}
+ probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ if (!probe_ent) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) {
probe_ent->port[0].scr_addr =
pci_resource_start(pdev, SIS_SCR_PCI_BAR);
config SKY2
tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
select CRC32
---help---
This driver supports Gigabit Ethernet adapters based on the
Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
- This driver does not support the original Yukon chipset: a seperate
- driver, skge, is provided for Yukon-based adapters.
+ There is companion driver for the older Marvell Yukon and
+ Genesis based adapters: skge.
To compile this driver as a module, choose M here: the module
will be called sky2. This is recommended.
static int ep93xx_rx(struct net_device *dev, int *budget)
{
struct ep93xx_priv *ep = netdev_priv(dev);
- int tail_offset;
int rx_done;
int processed;
- tail_offset = rdl(ep, REG_RXSTSQCURADD) - ep->descs_dma_addr;
-
rx_done = 0;
processed = 0;
while (*budget > 0) {
entry = ep->rx_pointer;
rstat = ep->descs->rstat + entry;
- if ((void *)rstat - (void *)ep->descs == tail_offset) {
+
+ rstat0 = rstat->rstat0;
+ rstat1 = rstat->rstat1;
+ if (!(rstat0 & RSTAT0_RFP) || !(rstat1 & RSTAT1_RFP)) {
rx_done = 1;
break;
}
- rstat0 = rstat->rstat0;
- rstat1 = rstat->rstat1;
rstat->rstat0 = 0;
rstat->rstat1 = 0;
- if (!(rstat0 & RSTAT0_RFP))
- printk(KERN_CRIT "ep93xx_rx: buffer not done "
- " %.8x %.8x\n", rstat0, rstat1);
if (!(rstat0 & RSTAT0_EOF))
printk(KERN_CRIT "ep93xx_rx: not end-of-frame "
" %.8x %.8x\n", rstat0, rstat1);
if (!(rstat0 & RSTAT0_EOB))
printk(KERN_CRIT "ep93xx_rx: not end-of-buffer "
" %.8x %.8x\n", rstat0, rstat1);
- if (!(rstat1 & RSTAT1_RFP))
- printk(KERN_CRIT "ep93xx_rx: buffer1 not done "
- " %.8x %.8x\n", rstat0, rstat1);
if ((rstat1 & RSTAT1_BUFFER_INDEX) >> 16 != entry)
printk(KERN_CRIT "ep93xx_rx: entry mismatch "
" %.8x %.8x\n", rstat0, rstat1);
if (!(rstat0 & RSTAT0_RWE)) {
- printk(KERN_NOTICE "ep93xx_rx: receive error "
- " %.8x %.8x\n", rstat0, rstat1);
-
ep->stats.rx_errors++;
if (rstat0 & RSTAT0_OE)
ep->stats.rx_fifo_errors++;
static int ep93xx_have_more_rx(struct ep93xx_priv *ep)
{
- struct ep93xx_rstat *rstat;
- int tail_offset;
-
- rstat = ep->descs->rstat + ep->rx_pointer;
- tail_offset = rdl(ep, REG_RXSTSQCURADD) - ep->descs_dma_addr;
-
- return !((void *)rstat - (void *)ep->descs == tail_offset);
+ struct ep93xx_rstat *rstat = ep->descs->rstat + ep->rx_pointer;
+ return !!((rstat->rstat0 & RSTAT0_RFP) && (rstat->rstat1 & RSTAT1_RFP));
}
static int ep93xx_poll(struct net_device *dev, int *budget)
struct ep93xx_priv *ep = netdev_priv(dev);
int entry;
- if (unlikely(skb->len) > MAX_PKT_SIZE) {
+ if (unlikely(skb->len > MAX_PKT_SIZE)) {
ep->stats.tx_dropped++;
dev_kfree_skb(skb);
return NETDEV_TX_OK;
static void ep93xx_tx_complete(struct net_device *dev)
{
struct ep93xx_priv *ep = netdev_priv(dev);
- int tail_offset;
int wake;
- tail_offset = rdl(ep, REG_TXSTSQCURADD) - ep->descs_dma_addr;
wake = 0;
spin_lock(&ep->tx_pending_lock);
entry = ep->tx_clean_pointer;
tstat = ep->descs->tstat + entry;
- if ((void *)tstat - (void *)ep->descs == tail_offset)
- break;
tstat0 = tstat->tstat0;
+ if (!(tstat0 & TSTAT0_TXFP))
+ break;
+
tstat->tstat0 = 0;
- if (!(tstat0 & TSTAT0_TXFP))
- printk(KERN_CRIT "ep93xx_tx_complete: buffer not done "
- " %.8x\n", tstat0);
if (tstat0 & TSTAT0_FA)
printk(KERN_CRIT "ep93xx_tx_complete: frame aborted "
" %.8x\n", tstat0);
u64 hret;
struct hcp_ehea_port_cb0 *cb0;
- cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
- if (!cb0) {
+ cb0 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC); /* May be called via */
+ if (!cb0) { /* ehea_neq_tasklet() */
ehea_error("no mem for cb0");
ret = -ENOMEM;
goto out;
if (EHEA_BMASK_GET(NEQE_PORT_UP, eqe)) {
if (!netif_carrier_ok(port->netdev)) {
- ret = ehea_sense_port_attr(
- port);
+ ret = ehea_sense_port_attr(port);
if (ret) {
ehea_error("failed resensing port "
"attributes");
if ((enable && port->promisc) || (!enable && !port->promisc))
return;
- cb7 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ cb7 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC);
if (!cb7) {
ehea_error("no mem for cb7");
goto out;
struct ehea_mc_list *ehea_mcl_entry;
u64 hret;
- ehea_mcl_entry = kzalloc(sizeof(*ehea_mcl_entry), GFP_KERNEL);
+ ehea_mcl_entry = kzalloc(sizeof(*ehea_mcl_entry), GFP_ATOMIC);
if (!ehea_mcl_entry) {
ehea_error("no mem for mcl_entry");
return;
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
+* the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* firmware image, and set tx.boundary to 4KB.
*/
-#define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE 0x0132
#define PCI_DEVICE_ID_INTEL_E5000_PCIE23 0x25f7
#define PCI_DEVICE_ID_INTEL_E5000_PCIE47 0x25fa
((RxD3_t*)rxdp)->Buffer1_ptr = *temp1;
} else {
*skb = dev_alloc_skb(size);
+ if (!(*skb)) {
+ DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n",
+ dev->name);
+ return -ENOMEM;
+ }
((RxD3_t*)rxdp)->Buffer2_ptr = *temp2 =
pci_map_single(sp->pdev, (*skb)->data,
dev->mtu + 4,
((RxD3_t*)rxdp)->Buffer2_ptr = *temp2;
} else {
*skb = dev_alloc_skb(size);
-
+ if (!(*skb)) {
+ DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n",
+ dev->name);
+ return -ENOMEM;
+ }
((RxD3_t*)rxdp)->Buffer0_ptr = *temp0 =
pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
PCI_DMA_FROMDEVICE);
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
dev->poll = sky2_poll;
dev->weight = NAPI_WEIGHT;
#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = sky2_netpoll;
+ /* Network console (only works on port 0)
+ * because netpoll makes assumptions about NAPI
+ */
+ if (port == 0)
+ dev->poll_controller = sky2_netpoll;
#endif
sky2 = netdev_priv(dev);
dev->dma = dma[i];
pdev = platform_device_register_simple("proteon",
i, NULL, 0);
+ if (IS_ERR(pdev)) {
+ free_netdev(dev);
+ continue;
+ }
err = setup_card(dev, &pdev->dev);
if (!err) {
proteon_dev[i] = pdev;
/* Probe for cards. */
if (num == 0) {
printk(KERN_NOTICE "proteon.c: No cards found.\n");
- return (-ENODEV);
+ platform_driver_unregister(&proteon_driver);
+ return -ENODEV;
}
- return (0);
+ return 0;
}
static void __exit proteon_cleanup(void)
dev->dma = dma[i];
pdev = platform_device_register_simple("skisa",
i, NULL, 0);
+ if (IS_ERR(pdev)) {
+ free_netdev(dev);
+ continue;
+ }
err = setup_card(dev, &pdev->dev);
if (!err) {
sk_isa_dev[i] = pdev;
/* Probe for cards. */
if (num == 0) {
printk(KERN_NOTICE "skisa.c: No cards found.\n");
- return (-ENODEV);
+ platform_driver_unregister(&sk_isa_driver);
+ return -ENODEV;
}
- return (0);
+ return 0;
}
static void __exit sk_isa_cleanup(void)
#ifdef MODULE
printk(KERN_INFO "n2: no card initialized\n");
#endif
- return -ENOSYS; /* no parameters specified, abort */
+ return -EINVAL; /* no parameters specified, abort */
}
printk(KERN_INFO "%s\n", version);
n2_run(io, irq, ram, valid[0], valid[1]);
if (*hw == '\x0')
- return first_card ? 0 : -ENOSYS;
+ return first_card ? 0 : -EINVAL;
}while(*hw++ == ':');
printk(KERN_ERR "n2: invalid hardware parameters\n");
- return first_card ? 0 : -ENOSYS;
+ return first_card ? 0 : -EINVAL;
}
extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes);
extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class);
extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes);
-extern int ata_dev_revalidate(struct ata_device *dev, int post_reset);
extern void ata_port_disable(struct ata_port *);
extern void ata_std_ports(struct ata_ioports *ioaddr);
#ifdef CONFIG_PCI
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * 2 of the License.
*
* Many of the algorithms and ideas for this came from
* NIST Net which is not copyrighted.
git.openpandora.org / pandora-kernel.git / commitdiff