Blackfin: i2c-gpio boards: use GPIO_PF# defines

Rather than use raw numbers for the GPIO pins, use proper GPIO defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 84a06f6..20c1022 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -368,8 +368,8 @@ static struct platform_device bfin_device_gpiokeys = {
 #include <linux/i2c-gpio.h>
 
 static struct i2c_gpio_platform_data i2c_gpio_data = {
-       .sda_pin                = 8,
-       .scl_pin                = 9,
+       .sda_pin                = GPIO_PF8,
+       .scl_pin                = GPIO_PF9,
        .sda_is_open_drain      = 0,
        .scl_is_open_drain      = 0,
        .udelay                 = 40,

diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 054c8e6..a1cb8e7 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -422,8 +422,8 @@ static struct platform_device bfin_device_gpiokeys = {
 #include <linux/i2c-gpio.h>
 
 static struct i2c_gpio_platform_data i2c_gpio_data = {
-       .sda_pin                = 1,
-       .scl_pin                = 0,
+       .sda_pin                = GPIO_PF1,
+       .scl_pin                = GPIO_PF0,
        .sda_is_open_drain      = 0,
        .scl_is_open_drain      = 0,
        .udelay                 = 40,

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 5af7e6c..96fcfe5 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -497,8 +497,8 @@ static struct platform_device bfin_device_gpiokeys = {
 #include <linux/i2c-gpio.h>
 
 static struct i2c_gpio_platform_data i2c_gpio_data = {
-       .sda_pin                = 2,
-       .scl_pin                = 3,
+       .sda_pin                = GPIO_PF2,
+       .scl_pin                = GPIO_PF3,
        .sda_is_open_drain      = 0,
        .scl_is_open_drain      = 0,
        .udelay                 = 40,

diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index f1e27d2..ab7a487 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -380,8 +380,8 @@ static struct platform_device bfin_device_gpiokeys = {
 #include <linux/i2c-gpio.h>
 
 static struct i2c_gpio_platform_data i2c_gpio_data = {
-       .sda_pin                = 1,
-       .scl_pin                = 0,
+       .sda_pin                = GPIO_PF1,
+       .scl_pin                = GPIO_PF0,
        .sda_is_open_drain      = 0,
        .scl_is_open_drain      = 0,
        .udelay                 = 40,