[ARM] Kirkwood: restrict the scope of the PCIe reset workaround
authorNicolas Pitre <nico@fluxnic.net>
Thu, 21 Oct 2010 19:48:33 +0000 (15:48 -0400)
committerNicolas Pitre <nico@fluxnic.net>
Thu, 21 Oct 2010 19:52:03 +0000 (15:52 -0400)
Commit 21f0ba90a447 "orion/kirkwood: reset PCIe unit on boot" made the
reset of the PCIe unit unconditional.  While this may fix problems on some
targets, this also causes problems on other targets.

Saeed Bishara <saeed@marvell.com> said about the original problem: "We
couln't pinpoint the root cause of this issue, actually we failed to
reproduce that issue."

So let's restrict the reset of the PCIe unit only to the target where
the original problem was observed.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
arch/arm/mach-kirkwood/ts41x-setup.c
arch/arm/plat-orion/include/plat/pcie.h
arch/arm/plat-orion/pcie.c

index 2e14afe..6995199 100644 (file)
 #include "mpp.h"
 #include "tsx1x-common.h"
 
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
 #define QNAP_TS41X_JUMPER_JP1  45
 
 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
@@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void)
 
 static int __init ts41x_pci_init(void)
 {
-       if (machine_is_ts41x())
+       if (machine_is_ts41x()) {
+               /*
+                * Without this explicit reset, the PCIe SATA controller
+                * (Marvell 88sx7042/sata_mv) is known to stop working
+                * after a few minutes.
+                */
+               orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+
                kirkwood_pcie_init(KW_PCIE0);
+       }
 
    return 0;
 }
index 3ebfef7..cc99163 100644 (file)
 #ifndef __PLAT_PCIE_H
 #define __PLAT_PCIE_H
 
+struct pci_bus;
+
 u32 orion_pcie_dev_id(void __iomem *base);
 u32 orion_pcie_rev(void __iomem *base);
 int orion_pcie_link_up(void __iomem *base);
 int orion_pcie_x4_mode(void __iomem *base);
 int orion_pcie_get_local_bus_nr(void __iomem *base);
 void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_reset(void __iomem *base);
 void orion_pcie_setup(void __iomem *base,
                      struct mbus_dram_target_info *dram);
 int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
index 779553a..af2d733 100644 (file)
@@ -181,11 +181,6 @@ void __init orion_pcie_setup(void __iomem *base,
        u16 cmd;
        u32 mask;
 
-       /*
-        * soft reset PCIe unit
-        */
-       orion_pcie_reset(base);
-
        /*
         * Point PCIe unit MBUS decode windows to DRAM space.
         */