libs-y += arch/m32r/lib/ $(LIBGCC)
core-y += arch/m32r/kernel/ \
arch/m32r/mm/ \
- arch/m32r/boot/
+ arch/m32r/boot/ \
+ arch/m32r/platforms/
drivers-$(CONFIG_OPROFILE) += arch/m32r/oprofile/
m32r_ksyms.o sys_m32r.o semaphore.o signal.o ptrace.o
obj-$(CONFIG_SMP) += smp.o smpboot.o
-obj-$(CONFIG_PLAT_MAPPI) += setup_mappi.o io_mappi.o
-obj-$(CONFIG_PLAT_MAPPI2) += setup_mappi2.o io_mappi2.o
-obj-$(CONFIG_PLAT_MAPPI3) += setup_mappi3.o io_mappi3.o
-obj-$(CONFIG_PLAT_USRV) += setup_usrv.o io_usrv.o
-obj-$(CONFIG_PLAT_M32700UT) += setup_m32700ut.o io_m32700ut.o
-obj-$(CONFIG_PLAT_OPSPUT) += setup_opsput.o io_opsput.o
obj-$(CONFIG_MODULES) += module.o
-obj-$(CONFIG_PLAT_OAKS32R) += setup_oaks32r.o io_oaks32r.o
-obj-$(CONFIG_PLAT_M32104UT) += setup_m32104ut.o io_m32104ut.o
EXTRA_AFLAGS := -traditional
--- /dev/null
+# arch/m32r/platforms/Makefile
+obj-$(CONFIG_PLAT_M32104UT) += m32104ut/
+obj-$(CONFIG_PLAT_M32700UT) += m32700ut/
+obj-$(CONFIG_PLAT_MAPPI) += mappi/
+obj-$(CONFIG_PLAT_MAPPI2) += mappi2/
+obj-$(CONFIG_PLAT_MAPPI3) += mappi3/
+obj-$(CONFIG_PLAT_OAKS32R) += oaks32r/
+obj-$(CONFIG_PLAT_OPSPUT) += opsput/
+obj-$(CONFIG_PLAT_USRV) += usrv/
--- /dev/null
+obj-y := setup.o io.o
/*
- * linux/arch/m32r/kernel/io_m32104ut.c
+ * linux/arch/m32r/platforms/m32104ut/io.c
*
* Typical I/O routines for M32104UT board.
*
/*
- * linux/arch/m32r/kernel/setup_m32104ut.c
+ * linux/arch/m32r/platforms/m32104ut/setup.c
*
* Setup routines for M32104UT Board
*
--- /dev/null
+obj-y := setup.o io.o
/*
- * linux/arch/m32r/kernel/io_m32700ut.c
+ * linux/arch/m32r/platforms/m32700ut/io.c
*
* Typical I/O routines for M32700UT board.
*
/*
- * linux/arch/m32r/kernel/setup_m32700ut.c
+ * linux/arch/m32r/platforms/m32700ut/setup.c
*
* Setup routines for Renesas M32700UT Board
*
--- /dev/null
+obj-y := setup.o io.o
/*
- * linux/arch/m32r/kernel/io_mappi.c
+ * linux/arch/m32r/platforms/mappi/io.c
*
* Typical I/O routines for Mappi board.
*
/*
- * linux/arch/m32r/kernel/setup_mappi.c
+ * linux/arch/m32r/platforms/mappi/setup.c
*
* Setup routines for Renesas MAPPI Board
*
--- /dev/null
+obj-y := setup.o io.o
/*
- * linux/arch/m32r/kernel/io_mappi2.c
+ * linux/arch/m32r/platforms/mappi2/io.c
*
* Typical I/O routines for Mappi2 board.
*
/*
- * linux/arch/m32r/kernel/setup_mappi2.c
+ * linux/arch/m32r/platforms/mappi2/setup.c
*
* Setup routines for Renesas MAPPI-II(M3A-ZA36) Board
*
--- /dev/null
+obj-y := setup.o io.o
/*
- * linux/arch/m32r/kernel/io_mappi3.c
+ * linux/arch/m32r/platforms/mappi3/io.c
*
* Typical I/O routines for Mappi3 board.
*
/*
- * linux/arch/m32r/kernel/setup_mappi3.c
+ * linux/arch/m32r/platforms/mappi3/setup.c
*
* Setup routines for Renesas MAPPI-III(M3A-2170) Board
*
--- /dev/null
+obj-y := setup.o io.o
/*
- * linux/arch/m32r/kernel/io_oaks32r.c
+ * linux/arch/m32r/platforms/oaks32r/io.c
*
* Typical I/O routines for OAKS32R board.
*
/*
- * linux/arch/m32r/kernel/setup_oaks32r.c
+ * linux/arch/m32r/platforms/oaks32r/setup.c
*
* Setup routines for OAKS32R Board
*
--- /dev/null
+obj-y := setup.o io.o
/*
- * linux/arch/m32r/kernel/io_opsput.c
+ * linux/arch/m32r/platforms/opsput/io.c
*
* Typical I/O routines for OPSPUT board.
*
/*
- * linux/arch/m32r/kernel/setup_opsput.c
+ * linux/arch/m32r/platforms/opsput/setup.c
*
* Setup routines for Renesas OPSPUT Board
*
--- /dev/null
+obj-y := setup.o io.o
/*
- * linux/arch/m32r/kernel/io_usrv.c
+ * linux/arch/m32r/platforms/usrv/io.c
*
* Typical I/O routines for uServer board.
*
#include <asm/io.h>
#include <linux/types.h>
-#include "../drivers/m32r_cfc.h"
+#include "../../../../drivers/pcmcia/m32r_cfc.h"
extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int);
extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int);
/*
- * linux/arch/m32r/kernel/setup_usrv.c
+ * linux/arch/m32r/platforms/usrv/setup.c
*
* Setup routines for MITSUBISHI uServer
*
#endif /* CONFIG_SERIAL_M32R_SIO */
/* INT#67-#71: CFC#0 IREQ on PLD */
- for (i = 0 ; i < CONFIG_CFC_NUM ; i++ ) {
+ for (i = 0 ; i < CONFIG_M32R_CFC_NUM ; i++ ) {
irq_desc[PLD_IRQ_CF0 + i].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_CF0 + i].chip = &m32700ut_pld_irq_type;
irq_desc[PLD_IRQ_CF0 + i].action = 0;
icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD11;
enable_mappi_irq(M32R_IRQ_INT1);
}
-
git.openpandora.org / pandora-kernel.git / commitdiff