ath5k: Small cleanup on tweak_initvals

 * Now that we properly set rx/tx latencies for AR5311 remove
 that old buggy part of code left inside ath5k_hw_tweak_initval_settings
 that was never executed (you can't have an RF5112 radio on a mac older
 than AR5212). Also use a magic value for 5311 PHY_SCAL value.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index ca79ecd..4d61061 100644 (file)
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -2058,6 +2058,7 @@
 
 #define AR5K_PHY_SCAL                  0x9878
 #define AR5K_PHY_SCAL_32MHZ            0x0000000e
+#define        AR5K_PHY_SCAL_32MHZ_5311        0x00000008
 #define        AR5K_PHY_SCAL_32MHZ_2417        0x0000000a
 #define        AR5K_PHY_SCAL_32MHZ_HB63        0x00000032
 

diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 7db984c..c9e5bad 100644 (file)
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -730,24 +730,12 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
                ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
        }
 
-       if ((ah->ah_radio == AR5K_RF5112) &&
-       (ah->ah_mac_srev < AR5K_SREV_AR5211)) {
-               u32 usec_reg;
-               /* 5311 has different tx/rx latency masks
-                * from 5211, since we deal 5311 the same
-                * as 5211 when setting initvals, shift
-                * values here to their proper locations */
-               usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
-               ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 |
-                               AR5K_USEC_32 |
-                               AR5K_USEC_TX_LATENCY_5211 |
-                               AR5K_REG_SM(29,
-                               AR5K_USEC_RX_LATENCY_5210)),
-                               AR5K_USEC_5211);
+       if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
                /* Clear QCU/DCU clock gating register */
                ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT);
                /* Set DAC/ADC delays */
-               ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL);
+               ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ_5311,
+                                               AR5K_PHY_SCAL);
                /* Enable PCU FIFO corruption ECO */
                AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
                                        AR5K_DIAG_SW_ECO_ENABLE);