mmc: add DT bindings for more MMC capability flags

Many MMC capability flags are platform-dependent and are traditionally set
in platform data. With DT often each such capability requires a special
binding. Add bindings for MMC_CAP_SD_HIGHSPEED, MMC_CAP_MMC_HIGHSPEED,
MMC_CAP_POWER_OFF_CARD and MMC_CAP_SDIO_IRQ capabilities. Also add code to
DT parser to look up "keep-power-in-suspend" and "enable-sdio-wakeup"
bindings and set MMC_PM_KEEP_POWER and MMC_PM_WAKE_SDIO_IRQ respectively,
if found.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 654b705..85aada2 100644 (file)
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -24,6 +24,10 @@ Optional properties:
 - max-frequency: maximum operating clock frequency
 - no-1-8-v: when present, denotes that 1.8v card voltage is not supported on
   this system, even if the controller claims it is.
+- cap-sd-highspeed: SD high-speed timing is supported
+- cap-mmc-highspeed: MMC high-speed timing is supported
+- cap-power-off-card: powering off the card is safe
+- cap-sdio-irq: enable SDIO IRQ signalling on this interface
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 9c53452..821cd82 100644 (file)
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -400,6 +400,19 @@ void mmc_of_parse(struct mmc_host *host)
        }
        if (explicit_inv_wp ^ gpio_inv_wp)
                host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+
+       if (of_find_property(np, "cap-sd-highspeed", &len))
+               host->caps |= MMC_CAP_SD_HIGHSPEED;
+       if (of_find_property(np, "cap-mmc-highspeed", &len))
+               host->caps |= MMC_CAP_MMC_HIGHSPEED;
+       if (of_find_property(np, "cap-power-off-card", &len))
+               host->caps |= MMC_CAP_POWER_OFF_CARD;
+       if (of_find_property(np, "cap-sdio-irq", &len))
+               host->caps |= MMC_CAP_SDIO_IRQ;
+       if (of_find_property(np, "keep-power-in-suspend", &len))
+               host->pm_caps |= MMC_PM_KEEP_POWER;
+       if (of_find_property(np, "enable-sdio-wakeup", &len))
+               host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
 }
 
 EXPORT_SYMBOL(mmc_of_parse);