--- /dev/null
+/*
+ * tscan1.c: driver for Technologic Systems TS-CAN1 PC104 boards
+ *
+ * Copyright 2010 Andre B. Oliveira
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * References:
+ * - Getting started with TS-CAN1, Technologic Systems, Jun 2009
+ * http://www.embeddedarm.com/documentation/ts-can1-manual.pdf
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/isa.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include "sja1000.h"
+
+MODULE_DESCRIPTION("Driver for Technologic Systems TS-CAN1 PC104 boards");
+MODULE_AUTHOR("Andre B. Oliveira <anbadeol@gmail.com>");
+MODULE_LICENSE("GPL");
+
+/* Maximum number of boards (one in each JP1:JP2 setting of IO address) */
+#define TSCAN1_MAXDEV 4
+
+/* PLD registers address offsets */
+#define TSCAN1_ID1 0
+#define TSCAN1_ID2 1
+#define TSCAN1_VERSION 2
+#define TSCAN1_LED 3
+#define TSCAN1_PAGE 4
+#define TSCAN1_MODE 5
+#define TSCAN1_JUMPERS 6
+
+/* PLD board identifier registers magic values */
+#define TSCAN1_ID1_VALUE 0xf6
+#define TSCAN1_ID2_VALUE 0xb9
+
+/* PLD mode register SJA1000 IO enable bit */
+#define TSCAN1_MODE_ENABLE 0x40
+
+/* PLD jumpers register bits */
+#define TSCAN1_JP4 0x10
+#define TSCAN1_JP5 0x20
+
+/* PLD IO base addresses start */
+#define TSCAN1_PLD_ADDRESS 0x150
+
+/* PLD register space size */
+#define TSCAN1_PLD_SIZE 8
+
+/* SJA1000 register space size */
+#define TSCAN1_SJA1000_SIZE 32
+
+/* SJA1000 crystal frequency (16MHz) */
+#define TSCAN1_SJA1000_XTAL 16000000
+
+/* SJA1000 IO base addresses */
+static const unsigned short tscan1_sja1000_addresses[] __devinitconst = {
+ 0x100, 0x120, 0x180, 0x1a0, 0x200, 0x240, 0x280, 0x320
+};
+
+/* Read SJA1000 register */
+static u8 tscan1_read(const struct sja1000_priv *priv, int reg)
+{
+ return inb((unsigned long)priv->reg_base + reg);
+}
+
+/* Write SJA1000 register */
+static void tscan1_write(const struct sja1000_priv *priv, int reg, u8 val)
+{
+ outb(val, (unsigned long)priv->reg_base + reg);
+}
+
+/* Probe for a TS-CAN1 board with JP2:JP1 jumper setting ID */
+static int __devinit tscan1_probe(struct device *dev, unsigned id)
+{
+ struct net_device *netdev;
+ struct sja1000_priv *priv;
+ unsigned long pld_base, sja1000_base;
+ int irq, i;
+
+ pld_base = TSCAN1_PLD_ADDRESS + id * TSCAN1_PLD_SIZE;
+ if (!request_region(pld_base, TSCAN1_PLD_SIZE, dev_name(dev)))
+ return -EBUSY;
+
+ if (inb(pld_base + TSCAN1_ID1) != TSCAN1_ID1_VALUE ||
+ inb(pld_base + TSCAN1_ID2) != TSCAN1_ID2_VALUE) {
+ release_region(pld_base, TSCAN1_PLD_SIZE);
+ return -ENODEV;
+ }
+
+ switch (inb(pld_base + TSCAN1_JUMPERS) & (TSCAN1_JP4 | TSCAN1_JP5)) {
+ case TSCAN1_JP4:
+ irq = 6;
+ break;
+ case TSCAN1_JP5:
+ irq = 7;
+ break;
+ case TSCAN1_JP4 | TSCAN1_JP5:
+ irq = 5;
+ break;
+ default:
+ dev_err(dev, "invalid JP4:JP5 setting (no IRQ)\n");
+ release_region(pld_base, TSCAN1_PLD_SIZE);
+ return -EINVAL;
+ }
+
+ netdev = alloc_sja1000dev(0);
+ if (!netdev) {
+ release_region(pld_base, TSCAN1_PLD_SIZE);
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(dev, netdev);
+ SET_NETDEV_DEV(netdev, dev);
+
+ netdev->base_addr = pld_base;
+ netdev->irq = irq;
+
+ priv = netdev_priv(netdev);
+ priv->read_reg = tscan1_read;
+ priv->write_reg = tscan1_write;
+ priv->can.clock.freq = TSCAN1_SJA1000_XTAL / 2;
+ priv->cdr = CDR_CBP | CDR_CLK_OFF;
+ priv->ocr = OCR_TX0_PUSHPULL;
+
+ /* Select the first SJA1000 IO address that is free and that works */
+ for (i = 0; i < ARRAY_SIZE(tscan1_sja1000_addresses); i++) {
+ sja1000_base = tscan1_sja1000_addresses[i];
+ if (!request_region(sja1000_base, TSCAN1_SJA1000_SIZE,
+ dev_name(dev)))
+ continue;
+
+ /* Set SJA1000 IO base address and enable it */
+ outb(TSCAN1_MODE_ENABLE | i, pld_base + TSCAN1_MODE);
+
+ priv->reg_base = (void __iomem *)sja1000_base;
+ if (!register_sja1000dev(netdev)) {
+ /* SJA1000 probe succeeded; turn LED off and return */
+ outb(0, pld_base + TSCAN1_LED);
+ netdev_info(netdev, "TS-CAN1 at 0x%lx 0x%lx irq %d\n",
+ pld_base, sja1000_base, irq);
+ return 0;
+ }
+
+ /* SJA1000 probe failed; release and try next address */
+ outb(0, pld_base + TSCAN1_MODE);
+ release_region(sja1000_base, TSCAN1_SJA1000_SIZE);
+ }
+
+ dev_err(dev, "failed to assign SJA1000 IO address\n");
+ dev_set_drvdata(dev, NULL);
+ free_sja1000dev(netdev);
+ release_region(pld_base, TSCAN1_PLD_SIZE);
+ return -ENXIO;
+}
+
+static int __devexit tscan1_remove(struct device *dev, unsigned id /*unused*/)
+{
+ struct net_device *netdev;
+ struct sja1000_priv *priv;
+ unsigned long pld_base, sja1000_base;
+
+ netdev = dev_get_drvdata(dev);
+ unregister_sja1000dev(netdev);
+ dev_set_drvdata(dev, NULL);
+
+ priv = netdev_priv(netdev);
+ pld_base = netdev->base_addr;
+ sja1000_base = (unsigned long)priv->reg_base;
+
+ outb(0, pld_base + TSCAN1_MODE); /* disable SJA1000 IO space */
+
+ release_region(sja1000_base, TSCAN1_SJA1000_SIZE);
+ release_region(pld_base, TSCAN1_PLD_SIZE);
+
+ free_sja1000dev(netdev);
+
+ return 0;
+}
+
+static struct isa_driver tscan1_isa_driver = {
+ .probe = tscan1_probe,
+ .remove = __devexit_p(tscan1_remove),
+ .driver = {
+ .name = "tscan1",
+ },
+};
+
+static int __init tscan1_init(void)
+{
+ return isa_register_driver(&tscan1_isa_driver, TSCAN1_MAXDEV);
+}
+module_init(tscan1_init);
+
+static void __exit tscan1_exit(void)
+{
+ isa_unregister_driver(&tscan1_isa_driver);
+}
+module_exit(tscan1_exit);
git.openpandora.org / pandora-kernel.git / commitdiff