This was done to resolve a conflict in the drivers/base/cpu.c file.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
What: devfs
Date: July 2005 (scheduled), finally removed in kernel v2.6.18
-Contact: Greg Kroah-Hartman <gregkh@suse.de>
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
devfs has been unmaintained for a number of years, has unfixable
races, contains a naming policy within the kernel that is
What: /sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
Date: August 2008
-Contact: Greg Kroah-Hartman <gregkh@suse.de>
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
These files show the various USB TMC capabilities as described
by the device itself. The full description of the bitfields
What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
Date: August 2008
-Contact: Greg Kroah-Hartman <gregkh@suse.de>
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
These files show the various USB TMC capabilities as described
by the device itself. The full description of the bitfields
What: /sys/bus/usb/drivers/usbtmc/devices/*/TermChar
Date: August 2008
-Contact: Greg Kroah-Hartman <gregkh@suse.de>
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
This file is the TermChar value to be sent to the USB TMC
device as described by the document, "Universal Serial Bus Test
What: /sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
Date: August 2008
-Contact: Greg Kroah-Hartman <gregkh@suse.de>
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
This file determines if the TermChar is to be sent to the
device on every transaction or not. For more details about
What: /sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
Date: August 2008
-Contact: Greg Kroah-Hartman <gregkh@suse.de>
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
This file determines if the the transaction of the USB TMC
device is to be automatically aborted if there is any error.
What: /sys/class/
Date: Febuary 2006
-Contact: Greg Kroah-Hartman <gregkh@suse.de>
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
The /sys/class directory will consist of a group of
subdirectories describing individual classes of devices
What: /sys/devices
Date: February 2006
-Contact: Greg Kroah-Hartman <gregkh@suse.de>
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
The /sys/devices tree contains a snapshot of the
internal state of the kernel device tree. Devices will
--- /dev/null
+What: /sys/devices/socX
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ The /sys/devices/ directory contains a sub-directory for each
+ System-on-Chip (SoC) device on a running platform. Information
+ regarding each SoC can be obtained by reading sysfs files. This
+ functionality is only available if implemented by the platform.
+
+ The directory created for each SoC will also house information
+ about devices which are commonly contained in /sys/devices/platform.
+ It has been agreed that if an SoC device exists, its supported
+ devices would be better suited to appear as children of that SoC.
+
+What: /sys/devices/socX/machine
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ Read-only attribute common to all SoCs. Contains the SoC machine
+ name (e.g. Ux500).
+
+What: /sys/devices/socX/family
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ Read-only attribute common to all SoCs. Contains SoC family name
+ (e.g. DB8500).
+
+What: /sys/devices/socX/soc_id
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ Read-only attribute supported by most SoCs. In the case of
+ ST-Ericsson's chips this contains the SoC serial number.
+
+What: /sys/devices/socX/revision
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ Read-only attribute supported by most SoCs. Contains the SoC's
+ manufacturing revision number.
+
+What: /sys/devices/socX/process
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ Read-only attribute supported ST-Ericsson's silicon. Contains the
+ the process by which the silicon chip was manufactured.
+
+What: /sys/bus/soc
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ The /sys/bus/soc/ directory contains the usual sub-folders
+ expected under most buses. /sys/bus/soc/devices is of particular
+ interest, as it contains a symlink for each SoC device found on
+ the system. Each symlink points back into the aforementioned
+ /sys/devices/socX devices.
What: /sys/devices/platform/samsung/performance_level
Date: January 1, 2010
KernelVersion: 2.6.33
-Contact: Greg Kroah-Hartman <gregkh@suse.de>
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description: Some Samsung laptops have different "performance levels"
that are can be modified by a function key, and by this
sysfs file. These values don't always make a whole lot
Dynamic debug has even more useful features:
* Simple query language allows turning on and off debugging statements by
- matching any combination of:
+ matching any combination of 0 or 1 of:
- source filename
- function name
==========================
At the lexical level, a command comprises a sequence of words separated
-by whitespace characters. Note that newlines are treated as word
-separators and do *not* end a command or allow multiple commands to
-be done together. So these are all equivalent:
+by spaces or tabs. So these are all equivalent:
nullarbor:~ # echo -c 'file svcsock.c line 1603 +p' >
<debugfs>/dynamic_debug/control
nullarbor:~ # echo -c ' file svcsock.c line 1603 +p ' >
<debugfs>/dynamic_debug/control
-nullarbor:~ # echo -c 'file svcsock.c\nline 1603 +p' >
- <debugfs>/dynamic_debug/control
nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
<debugfs>/dynamic_debug/control
-Commands are bounded by a write() system call. If you want to do
-multiple commands you need to do a separate "echo" for each, like:
+Command submissions are bounded by a write() system call.
+Multiple commands can be written together, separated by ';' or '\n'.
-nullarbor:~ # echo 'file svcsock.c line 1603 +p' > /proc/dprintk ;\
-> echo 'file svcsock.c line 1563 +p' > /proc/dprintk
+ ~# echo "func pnpacpi_get_resources +p; func pnp_assign_mem +p" \
+ > <debugfs>/dynamic_debug/control
-or even like:
+If your query set is big, you can batch them too:
-nullarbor:~ # (
-> echo 'file svcsock.c line 1603 +p' ;\
-> echo 'file svcsock.c line 1563 +p' ;\
-> ) > /proc/dprintk
+ ~# cat query-batch-file > <debugfs>/dynamic_debug/control
At the syntactical level, a command comprises a sequence of match
specifications, followed by a flags change specification.
func svc_tcp_accept
file
- The given string is compared against either the full
- pathname or the basename of the source file of each
- callsite. Examples:
+ The given string is compared against either the full pathname, the
+ src-root relative pathname, or the basename of the source file of
+ each callsite. Examples:
file svcsock.c
+ file kernel/freezer.c
file /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c
module
mount -t debugfs none /sys/kernel/debug
-(Or an equivalent /etc/fstab line).
+(Or an equivalent /etc/fstab line).
+The debugfs root directory is accessible by anyone by default. To
+restrict access to the tree the "uid", "gid" and "mode" mount
+options can be used.
Note that the debugfs API is exported GPL-only to modules.
'Y' all linux/cyclades.h
'Z' 14-15 drivers/message/fusion/mptctl.h
'[' 00-07 linux/usb/tmc.h USB Test and Measurement Devices
- <mailto:gregkh@suse.de>
+ <mailto:gregkh@linuxfoundation.org>
'a' all linux/atm*.h, linux/sonet.h ATM on linux
<http://lrcwww.epfl.ch/>
'b' 00-FF conflict! bit3 vme host bridge
git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
quilt trees:
- - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman < gregkh@suse.de>
+ - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman < gregkh@linuxfoundation.org>
kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
- x86-64, partly i386, Andi Kleen < ak@suse.de>
ftp.firstfloor.org:/pub/ak/x86_64/quilt/
Everything you never wanted to know about kobjects, ksets, and ktypes
-Greg Kroah-Hartman <gregkh@suse.de>
+Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on an original article by Jon Corbet for lwn.net written October 1,
2003 and located at http://lwn.net/Articles/51437/
git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
使用quilt管理的补丁集：
- - USB, PCI, 驱动程序核心和I2C, Greg Kroah-Hartman <gregkh@suse.de>
+ - USB, PCI, 驱动程序核心和I2C, Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
- x86-64, 部分i386, Andi Kleen <ak@suse.de>
ftp.firstfloor.org:/pub/ak/x86_64/quilt/
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
+config ARCH_HAS_CPU_AUTOPROBE
+ def_bool y
+
config HAVE_SETUP_PER_CPU_AREA
def_bool y
#include <crypto/aes.h>
#include <crypto/cryptd.h>
#include <crypto/ctr.h>
+#include <asm/cpu_device_id.h>
#include <asm/i387.h>
#include <asm/aes.h>
#include <crypto/scatterwalk.h>
};
#endif
+
+static const struct x86_cpu_id aesni_cpu_id[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_AES),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, aesni_cpu_id);
+
static int __init aesni_init(void)
{
int err;
- if (!cpu_has_aes) {
- printk(KERN_INFO "Intel AES-NI instructions are not detected.\n");
+ if (!x86_match_cpu(aesni_cpu_id))
return -ENODEV;
- }
if ((err = crypto_fpu_init()))
goto fpu_err;
#include <crypto/internal/hash.h>
#include <asm/cpufeature.h>
+#include <asm/cpu_device_id.h>
#define CHKSUM_BLOCK_SIZE 1
#define CHKSUM_DIGEST_SIZE 4
}
};
+static const struct x86_cpu_id crc32c_cpu_id[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_XMM4_2),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, crc32c_cpu_id);
static int __init crc32c_intel_mod_init(void)
{
- if (cpu_has_xmm4_2)
- return crypto_register_shash(&alg);
- else
+ if (!x86_match_cpu(crc32c_cpu_id))
return -ENODEV;
+ return crypto_register_shash(&alg);
}
static void __exit crc32c_intel_mod_fini(void)
#include <crypto/gf128mul.h>
#include <crypto/internal/hash.h>
#include <asm/i387.h>
+#include <asm/cpu_device_id.h>
#define GHASH_BLOCK_SIZE 16
#define GHASH_DIGEST_SIZE 16
},
};
+static const struct x86_cpu_id pcmul_cpu_id[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_PCLMULQDQ), /* Pickle-Mickle-Duck */
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, pcmul_cpu_id);
+
static int __init ghash_pclmulqdqni_mod_init(void)
{
int err;
- if (!cpu_has_pclmulqdq) {
- printk(KERN_INFO "Intel PCLMULQDQ-NI instructions are not"
- " detected.\n");
+ if (!x86_match_cpu(pcmul_cpu_id))
return -ENODEV;
- }
err = crypto_register_shash(&ghash_alg);
if (err)
--- /dev/null
+#ifndef _CPU_DEVICE_ID
+#define _CPU_DEVICE_ID 1
+
+/*
+ * Declare drivers belonging to specific x86 CPUs
+ * Similar in spirit to pci_device_id and related PCI functions
+ */
+
+#include <linux/mod_devicetable.h>
+
+extern const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match);
+
+#endif
#define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */
#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */
/* Virtualization flags: Linux defined, word 8 */
#define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */
obj-y += proc.o capflags.o powerflags.o common.o
obj-y += vmware.o hypervisor.o sched.o mshyperv.o
obj-y += rdrand.o
+obj-y += match.o
obj-$(CONFIG_X86_32) += bugs.o
obj-$(CONFIG_X86_64) += bugs_64.o
--- /dev/null
+#include <asm/cpu_device_id.h>
+#include <asm/processor.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+/**
+ * x86_match_cpu - match current CPU again an array of x86_cpu_ids
+ * @match: Pointer to array of x86_cpu_ids. Last entry terminated with
+ * {}.
+ *
+ * Return the entry if the current CPU matches the entries in the
+ * passed x86_cpu_id match table. Otherwise NULL. The match table
+ * contains vendor (X86_VENDOR_*), family, model and feature bits or
+ * respective wildcard entries.
+ *
+ * A typical table entry would be to match a specific CPU
+ * { X86_VENDOR_INTEL, 6, 0x12 }
+ * or to match a specific CPU feature
+ * { X86_FEATURE_MATCH(X86_FEATURE_FOOBAR) }
+ *
+ * Fields can be wildcarded with %X86_VENDOR_ANY, %X86_FAMILY_ANY,
+ * %X86_MODEL_ANY, %X86_FEATURE_ANY or 0 (except for vendor)
+ *
+ * Arrays used to match for this should also be declared using
+ * MODULE_DEVICE_TABLE(x86_cpu, ...)
+ *
+ * This always matches against the boot cpu, assuming models and features are
+ * consistent over all CPUs.
+ */
+const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match)
+{
+ const struct x86_cpu_id *m;
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+
+ for (m = match; m->vendor | m->family | m->model | m->feature; m++) {
+ if (m->vendor != X86_VENDOR_ANY && c->x86_vendor != m->vendor)
+ continue;
+ if (m->family != X86_FAMILY_ANY && c->x86 != m->family)
+ continue;
+ if (m->model != X86_MODEL_ANY && c->x86_model != m->model)
+ continue;
+ if (m->feature != X86_FEATURE_ANY && !cpu_has(c, m->feature))
+ continue;
+ return m;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(x86_match_cpu);
+
+ssize_t arch_print_cpu_modalias(struct device *dev,
+ struct device_attribute *attr,
+ char *bufptr)
+{
+ int size = PAGE_SIZE;
+ int i, n;
+ char *buf = bufptr;
+
+ n = snprintf(buf, size, "x86cpu:vendor:%04X:family:%04X:"
+ "model:%04X:feature:",
+ boot_cpu_data.x86_vendor,
+ boot_cpu_data.x86,
+ boot_cpu_data.x86_model);
+ size -= n;
+ buf += n;
+ size -= 1;
+ for (i = 0; i < NCAPINTS*32; i++) {
+ if (boot_cpu_has(i)) {
+ n = snprintf(buf, size, ",%04X", i);
+ if (n >= size) {
+ WARN(1, "x86 features overflow page\n");
+ break;
+ }
+ size -= n;
+ buf += n;
+ }
+ }
+ *buf++ = '\n';
+ return buf - bufptr;
+}
+
+int arch_cpu_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ char *buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ if (buf) {
+ arch_print_cpu_modalias(NULL, NULL, buf);
+ add_uevent_var(env, "MODALIAS=%s", buf);
+ kfree(buf);
+ }
+ return 0;
+}
{ X86_FEATURE_EPB, CR_ECX, 3, 0x00000006, 0 },
{ X86_FEATURE_XSAVEOPT, CR_EAX, 0, 0x0000000d, 1 },
{ X86_FEATURE_CPB, CR_EDX, 9, 0x80000007, 0 },
+ { X86_FEATURE_HW_PSTATE, CR_EDX, 7, 0x80000007, 0 },
{ X86_FEATURE_NPT, CR_EDX, 0, 0x8000000a, 0 },
{ X86_FEATURE_LBRV, CR_EDX, 1, 0x8000000a, 0 },
{ X86_FEATURE_SVML, CR_EDX, 2, 0x8000000a, 0 },
#include <asm/microcode.h>
#include <asm/processor.h>
+#include <asm/cpu_device_id.h>
MODULE_DESCRIPTION("Microcode Update Driver");
MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
.notifier_call = mc_cpu_callback,
};
+#ifdef MODULE
+/* Autoload on Intel and AMD systems */
+static const struct x86_cpu_id microcode_id[] = {
+#ifdef CONFIG_MICROCODE_INTEL
+ { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, },
+#endif
+#ifdef CONFIG_MICROCODE_AMD
+ { X86_VENDOR_AMD, X86_FAMILY_ANY, X86_MODEL_ANY, },
+#endif
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, microcode_id);
+#endif
+
static int __init microcode_init(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
#ifdef CONFIG_CPU_FREQ
acpi_processor_ppc_has_changed(pr, 0);
+ acpi_processor_load_module(pr);
#endif
acpi_processor_get_throttling_info(pr);
acpi_processor_get_limit_info(pr);
acpi_processor_ppc_status &= ~PPC_REGISTERED;
}
+/*
+ * Do a quick check if the systems looks like it should use ACPI
+ * cpufreq. We look at a _PCT method being available, but don't
+ * do a whole lot of sanity checks.
+ */
+void acpi_processor_load_module(struct acpi_processor *pr)
+{
+ static int requested;
+ acpi_status status = 0;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+
+ if (!arch_has_acpi_pdc() || requested)
+ return;
+ status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer);
+ if (!ACPI_FAILURE(status)) {
+ printk(KERN_INFO PREFIX "Requesting acpi_cpufreq\n");
+ request_module_nowait("acpi_cpufreq");
+ requested = 1;
+ }
+ kfree(buffer.pointer);
+}
+
static int acpi_processor_get_performance_control(struct acpi_processor *pr)
{
int result = 0;
bool
default n
+config SOC_BUS
+ bool
+
source "drivers/base/regmap/Kconfig"
config DMA_SHARED_BUFFER
endif
obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o
obj-$(CONFIG_REGMAP) += regmap/
+obj-$(CONFIG_SOC_BUS) += soc.o
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
* @knode_parent - node in sibling list
* @knode_driver - node in driver list
* @knode_bus - node in bus list
+ * @deferred_probe - entry in deferred_probe_list which is used to retry the
+ * binding of drivers which were unable to get all the resources needed by
+ * the device; typically because it depends on another driver getting
+ * probed first.
* @driver_data - private pointer for driver specific info. Will turn into a
* list soon.
* @device - pointer back to the struct class that this structure is
struct klist_node knode_parent;
struct klist_node knode_driver;
struct klist_node knode_bus;
+ struct list_head deferred_probe;
void *driver_data;
struct device *device;
};
extern void driver_detach(struct device_driver *drv);
extern int driver_probe_device(struct device_driver *drv, struct device *dev);
+extern void driver_deferred_probe_del(struct device *dev);
static inline int driver_match_device(struct device_driver *drv,
struct device *dev)
{
void subsys_interface_unregister(struct subsys_interface *sif)
{
- struct bus_type *subsys = sif->subsys;
+ struct bus_type *subsys;
struct subsys_dev_iter iter;
struct device *dev;
- if (!sif)
+ if (!sif || !sif->subsys)
return;
+ subsys = sif->subsys;
+
mutex_lock(&subsys->p->mutex);
list_del_init(&sif->node);
if (sif->remove_dev) {
dev->p->device = dev;
klist_init(&dev->p->klist_children, klist_children_get,
klist_children_put);
+ INIT_LIST_HEAD(&dev->p->deferred_probe);
return 0;
}
device_remove_file(dev, &uevent_attr);
device_remove_attrs(dev);
bus_remove_device(dev);
+ driver_deferred_probe_del(dev);
/*
* Some platform devices are driven without driver attached
#include <linux/device.h>
#include <linux/node.h>
#include <linux/gfp.h>
+#include <linux/slab.h>
#include <linux/percpu.h>
#include "base.h"
cpu->dev.id = num;
cpu->dev.bus = &cpu_subsys;
cpu->dev.release = cpu_device_release;
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+ cpu->dev.bus->uevent = arch_cpu_uevent;
+#endif
error = device_register(&cpu->dev);
if (!error && cpu->hotpluggable)
register_cpu_control(cpu);
}
EXPORT_SYMBOL_GPL(get_cpu_device);
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+static DEVICE_ATTR(modalias, 0444, arch_print_cpu_modalias, NULL);
+#endif
+
static struct attribute *cpu_root_attrs[] = {
#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
&dev_attr_probe.attr,
&cpu_attrs[2].attr.attr,
&dev_attr_kernel_max.attr,
&dev_attr_offline.attr,
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+ &dev_attr_modalias.attr,
+#endif
NULL
};
#include "base.h"
#include "power/power.h"
+/*
+ * Deferred Probe infrastructure.
+ *
+ * Sometimes driver probe order matters, but the kernel doesn't always have
+ * dependency information which means some drivers will get probed before a
+ * resource it depends on is available. For example, an SDHCI driver may
+ * first need a GPIO line from an i2c GPIO controller before it can be
+ * initialized. If a required resource is not available yet, a driver can
+ * request probing to be deferred by returning -EPROBE_DEFER from its probe hook
+ *
+ * Deferred probe maintains two lists of devices, a pending list and an active
+ * list. A driver returning -EPROBE_DEFER causes the device to be added to the
+ * pending list. A successful driver probe will trigger moving all devices
+ * from the pending to the active list so that the workqueue will eventually
+ * retry them.
+ *
+ * The deferred_probe_mutex must be held any time the deferred_probe_*_list
+ * of the (struct device*)->p->deferred_probe pointers are manipulated
+ */
+static DEFINE_MUTEX(deferred_probe_mutex);
+static LIST_HEAD(deferred_probe_pending_list);
+static LIST_HEAD(deferred_probe_active_list);
+static struct workqueue_struct *deferred_wq;
+
+/**
+ * deferred_probe_work_func() - Retry probing devices in the active list.
+ */
+static void deferred_probe_work_func(struct work_struct *work)
+{
+ struct device *dev;
+ struct device_private *private;
+ /*
+ * This block processes every device in the deferred 'active' list.
+ * Each device is removed from the active list and passed to
+ * bus_probe_device() to re-attempt the probe. The loop continues
+ * until every device in the active list is removed and retried.
+ *
+ * Note: Once the device is removed from the list and the mutex is
+ * released, it is possible for the device get freed by another thread
+ * and cause a illegal pointer dereference. This code uses
+ * get/put_device() to ensure the device structure cannot disappear
+ * from under our feet.
+ */
+ mutex_lock(&deferred_probe_mutex);
+ while (!list_empty(&deferred_probe_active_list)) {
+ private = list_first_entry(&deferred_probe_active_list,
+ typeof(*dev->p), deferred_probe);
+ dev = private->device;
+ list_del_init(&private->deferred_probe);
+
+ get_device(dev);
+
+ /*
+ * Drop the mutex while probing each device; the probe path may
+ * manipulate the deferred list
+ */
+ mutex_unlock(&deferred_probe_mutex);
+ dev_dbg(dev, "Retrying from deferred list\n");
+ bus_probe_device(dev);
+ mutex_lock(&deferred_probe_mutex);
+
+ put_device(dev);
+ }
+ mutex_unlock(&deferred_probe_mutex);
+}
+static DECLARE_WORK(deferred_probe_work, deferred_probe_work_func);
+
+static void driver_deferred_probe_add(struct device *dev)
+{
+ mutex_lock(&deferred_probe_mutex);
+ if (list_empty(&dev->p->deferred_probe)) {
+ dev_dbg(dev, "Added to deferred list\n");
+ list_add(&dev->p->deferred_probe, &deferred_probe_pending_list);
+ }
+ mutex_unlock(&deferred_probe_mutex);
+}
+
+void driver_deferred_probe_del(struct device *dev)
+{
+ mutex_lock(&deferred_probe_mutex);
+ if (!list_empty(&dev->p->deferred_probe)) {
+ dev_dbg(dev, "Removed from deferred list\n");
+ list_del_init(&dev->p->deferred_probe);
+ }
+ mutex_unlock(&deferred_probe_mutex);
+}
+
+static bool driver_deferred_probe_enable = false;
+/**
+ * driver_deferred_probe_trigger() - Kick off re-probing deferred devices
+ *
+ * This functions moves all devices from the pending list to the active
+ * list and schedules the deferred probe workqueue to process them. It
+ * should be called anytime a driver is successfully bound to a device.
+ */
+static void driver_deferred_probe_trigger(void)
+{
+ if (!driver_deferred_probe_enable)
+ return;
+
+ /*
+ * A successful probe means that all the devices in the pending list
+ * should be triggered to be reprobed. Move all the deferred devices
+ * into the active list so they can be retried by the workqueue
+ */
+ mutex_lock(&deferred_probe_mutex);
+ list_splice_tail_init(&deferred_probe_pending_list,
+ &deferred_probe_active_list);
+ mutex_unlock(&deferred_probe_mutex);
+
+ /*
+ * Kick the re-probe thread. It may already be scheduled, but it is
+ * safe to kick it again.
+ */
+ queue_work(deferred_wq, &deferred_probe_work);
+}
+
+/**
+ * deferred_probe_initcall() - Enable probing of deferred devices
+ *
+ * We don't want to get in the way when the bulk of drivers are getting probed.
+ * Instead, this initcall makes sure that deferred probing is delayed until
+ * late_initcall time.
+ */
+static int deferred_probe_initcall(void)
+{
+ deferred_wq = create_singlethread_workqueue("deferwq");
+ if (WARN_ON(!deferred_wq))
+ return -ENOMEM;
+
+ driver_deferred_probe_enable = true;
+ driver_deferred_probe_trigger();
+ return 0;
+}
+late_initcall(deferred_probe_initcall);
static void driver_bound(struct device *dev)
{
klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices);
+ /*
+ * Make sure the device is no longer in one of the deferred lists and
+ * kick off retrying all pending devices
+ */
+ driver_deferred_probe_del(dev);
+ driver_deferred_probe_trigger();
+
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
BUS_NOTIFY_BOUND_DRIVER, dev);
driver_sysfs_remove(dev);
dev->driver = NULL;
- if (ret != -ENODEV && ret != -ENXIO) {
+ if (ret == -EPROBE_DEFER) {
+ /* Driver requested deferred probing */
+ dev_info(dev, "Driver %s requests probe deferral\n", drv->name);
+ driver_deferred_probe_add(dev);
+ } else if (ret != -ENODEV && ret != -ENXIO) {
/* driver matched but the probe failed */
printk(KERN_WARNING
"%s: probe of %s failed with error %d\n",
}
EXPORT_SYMBOL_GPL(driver_add_kobj);
-/**
- * get_driver - increment driver reference count.
- * @drv: driver.
- */
-struct device_driver *get_driver(struct device_driver *drv)
-{
- if (drv) {
- struct driver_private *priv;
- struct kobject *kobj;
-
- kobj = kobject_get(&drv->p->kobj);
- priv = to_driver(kobj);
- return priv->driver;
- }
- return NULL;
-}
-EXPORT_SYMBOL_GPL(get_driver);
-
-/**
- * put_driver - decrement driver's refcount.
- * @drv: driver.
- */
-void put_driver(struct device_driver *drv)
-{
- kobject_put(&drv->p->kobj);
-}
-EXPORT_SYMBOL_GPL(put_driver);
-
static int driver_add_groups(struct device_driver *drv,
const struct attribute_group **groups)
{
other = driver_find(drv->name, drv->bus);
if (other) {
- put_driver(other);
printk(KERN_ERR "Error: Driver '%s' is already registered, "
"aborting...\n", drv->name);
return -EBUSY;
* Call kset_find_obj() to iterate over list of drivers on
* a bus to find driver by name. Return driver if found.
*
- * Note that kset_find_obj increments driver's reference count.
+ * This routine provides no locking to prevent the driver it returns
+ * from being unregistered or unloaded while the caller is using it.
+ * The caller is responsible for preventing this.
*/
struct device_driver *driver_find(const char *name, struct bus_type *bus)
{
struct driver_private *priv;
if (k) {
+ /* Drop reference added by kset_find_obj() */
+ kobject_put(k);
priv = to_driver(k);
return priv->driver;
}
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <linux/idr.h>
+#include <linux/spinlock.h>
+#include <linux/sys_soc.h>
+#include <linux/err.h>
+
+static DEFINE_IDR(soc_ida);
+static DEFINE_SPINLOCK(soc_lock);
+
+static ssize_t soc_info_get(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+struct soc_device {
+ struct device dev;
+ struct soc_device_attribute *attr;
+ int soc_dev_num;
+};
+
+static struct bus_type soc_bus_type = {
+ .name = "soc",
+};
+
+static DEVICE_ATTR(machine, S_IRUGO, soc_info_get, NULL);
+static DEVICE_ATTR(family, S_IRUGO, soc_info_get, NULL);
+static DEVICE_ATTR(soc_id, S_IRUGO, soc_info_get, NULL);
+static DEVICE_ATTR(revision, S_IRUGO, soc_info_get, NULL);
+
+struct device *soc_device_to_device(struct soc_device *soc_dev)
+{
+ return &soc_dev->dev;
+}
+
+static mode_t soc_attribute_mode(struct kobject *kobj,
+ struct attribute *attr,
+ int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+ if ((attr == &dev_attr_machine.attr)
+ && (soc_dev->attr->machine != NULL))
+ return attr->mode;
+ if ((attr == &dev_attr_family.attr)
+ && (soc_dev->attr->family != NULL))
+ return attr->mode;
+ if ((attr == &dev_attr_revision.attr)
+ && (soc_dev->attr->revision != NULL))
+ return attr->mode;
+ if ((attr == &dev_attr_soc_id.attr)
+ && (soc_dev->attr->soc_id != NULL))
+ return attr->mode;
+
+ /* Unknown or unfilled attribute. */
+ return 0;
+}
+
+static ssize_t soc_info_get(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+ if (attr == &dev_attr_machine)
+ return sprintf(buf, "%s\n", soc_dev->attr->machine);
+ if (attr == &dev_attr_family)
+ return sprintf(buf, "%s\n", soc_dev->attr->family);
+ if (attr == &dev_attr_revision)
+ return sprintf(buf, "%s\n", soc_dev->attr->revision);
+ if (attr == &dev_attr_soc_id)
+ return sprintf(buf, "%s\n", soc_dev->attr->soc_id);
+
+ return -EINVAL;
+
+}
+
+static struct attribute *soc_attr[] = {
+ &dev_attr_machine.attr,
+ &dev_attr_family.attr,
+ &dev_attr_soc_id.attr,
+ &dev_attr_revision.attr,
+ NULL,
+};
+
+static const struct attribute_group soc_attr_group = {
+ .attrs = soc_attr,
+ .is_visible = soc_attribute_mode,
+};
+
+static const struct attribute_group *soc_attr_groups[] = {
+ &soc_attr_group,
+ NULL,
+};
+
+static void soc_release(struct device *dev)
+{
+ struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+ kfree(soc_dev);
+}
+
+struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr)
+{
+ struct soc_device *soc_dev;
+ int ret;
+
+ soc_dev = kzalloc(sizeof(*soc_dev), GFP_KERNEL);
+ if (!soc_dev) {
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ /* Fetch a unique (reclaimable) SOC ID. */
+ do {
+ if (!ida_pre_get(&soc_ida, GFP_KERNEL)) {
+ ret = -ENOMEM;
+ goto out2;
+ }
+
+ spin_lock(&soc_lock);
+ ret = ida_get_new(&soc_ida, &soc_dev->soc_dev_num);
+ spin_unlock(&soc_lock);
+
+ } while (ret == -EAGAIN);
+
+ if (ret)
+ goto out2;
+
+ soc_dev->attr = soc_dev_attr;
+ soc_dev->dev.bus = &soc_bus_type;
+ soc_dev->dev.groups = soc_attr_groups;
+ soc_dev->dev.release = soc_release;
+
+ dev_set_name(&soc_dev->dev, "soc%d", soc_dev->soc_dev_num);
+
+ ret = device_register(&soc_dev->dev);
+ if (ret)
+ goto out3;
+
+ return soc_dev;
+
+out3:
+ ida_remove(&soc_ida, soc_dev->soc_dev_num);
+out2:
+ kfree(soc_dev);
+out1:
+ return ERR_PTR(ret);
+}
+
+/* Ensure soc_dev->attr is freed prior to calling soc_device_unregister. */
+void soc_device_unregister(struct soc_device *soc_dev)
+{
+ ida_remove(&soc_ida, soc_dev->soc_dev_num);
+
+ device_unregister(&soc_dev->dev);
+}
+
+static int __init soc_bus_register(void)
+{
+ spin_lock_init(&soc_lock);
+
+ return bus_register(&soc_bus_type);
+}
+core_initcall(soc_bus_register);
+
+static void __exit soc_bus_unregister(void)
+{
+ ida_destroy(&soc_ida);
+
+ bus_unregister(&soc_bus_type);
+}
+module_exit(soc_bus_unregister);
.owner = THIS_MODULE,
};
+#ifdef MODULE
+static DEFINE_PCI_DEVICE_TABLE(nforce2_ids) = {
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2 },
+ {}
+};
+MODULE_DEVICE_TABLE(pci, nforce2_ids);
+#endif
+
/**
* nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
*
#include <linux/io.h>
#include <linux/delay.h>
+#include <asm/cpu_device_id.h>
#include <asm/msr.h>
#include <asm/tsc.h>
.attr = eps_attr,
};
+
+/* This driver will work only on Centaur C7 processors with
+ * Enhanced SpeedStep/PowerSaver registers */
+static const struct x86_cpu_id eps_cpu_id[] = {
+ { X86_VENDOR_CENTAUR, 6, X86_MODEL_ANY, X86_FEATURE_EST },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, eps_cpu_id);
+
static int __init eps_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
-
- /* This driver will work only on Centaur C7 processors with
- * Enhanced SpeedStep/PowerSaver registers */
- if (c->x86_vendor != X86_VENDOR_CENTAUR
- || c->x86 != 6 || c->x86_model < 10)
- return -ENODEV;
- if (!cpu_has(c, X86_FEATURE_EST))
+ if (!x86_match_cpu(eps_cpu_id) || boot_cpu_data.x86_model < 10)
return -ENODEV;
-
if (cpufreq_register_driver(&eps_driver))
return -EINVAL;
return 0;
#include <linux/delay.h>
#include <linux/cpufreq.h>
+#include <asm/cpu_device_id.h>
#include <asm/msr.h>
#include <linux/timex.h>
#include <linux/io.h>
.attr = elanfreq_attr,
};
+static const struct x86_cpu_id elan_id[] = {
+ { X86_VENDOR_AMD, 4, 10, },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, elan_id);
static int __init elanfreq_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
-
- /* Test if we have the right hardware */
- if ((c->x86_vendor != X86_VENDOR_AMD) ||
- (c->x86 != 4) || (c->x86_model != 10)) {
- printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
+ if (!x86_match_cpu(elan_id))
return -ENODEV;
- }
return cpufreq_register_driver(&elanfreq_driver);
}
#include <linux/errno.h>
#include <linux/slab.h>
+#include <asm/cpu_device_id.h>
#include <asm/processor-cyrix.h>
/* PCI config registers, all at F0 */
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), },
{ 0, },
};
+MODULE_DEVICE_TABLE(pci, gx_chipset_tbl);
static void gx_write_byte(int reg, int value)
{
{
struct pci_dev *gx_pci = NULL;
- /* check if CPU is a MediaGX or a Geode. */
- if ((boot_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
- (boot_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
- pr_debug("error: no MediaGX/Geode processor found!\n");
- return NULL;
- }
-
/* detect which companion chip is used */
for_each_pci_dev(gx_pci) {
if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)
#include <linux/acpi.h>
#include <asm/msr.h>
+#include <asm/cpu_device_id.h>
#include <acpi/processor.h>
#include "longhaul.h"
.attr = longhaul_attr,
};
+static const struct x86_cpu_id longhaul_id[] = {
+ { X86_VENDOR_CENTAUR, 6 },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, longhaul_id);
static int __init longhaul_init(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
- if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
+ if (!x86_match_cpu(longhaul_id))
return -ENODEV;
#ifdef CONFIG_SMP
#include <asm/msr.h>
#include <asm/processor.h>
+#include <asm/cpu_device_id.h>
static struct cpufreq_driver longrun_driver;
.owner = THIS_MODULE,
};
+static const struct x86_cpu_id longrun_ids[] = {
+ { X86_VENDOR_TRANSMETA, X86_FAMILY_ANY, X86_MODEL_ANY,
+ X86_FEATURE_LONGRUN },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, longrun_ids);
/**
* longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
*/
static int __init longrun_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
-
- if (c->x86_vendor != X86_VENDOR_TRANSMETA ||
- !cpu_has(c, X86_FEATURE_LONGRUN))
+ if (!x86_match_cpu(longrun_ids))
return -ENODEV;
-
return cpufreq_register_driver(&longrun_driver);
}
#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/timer.h>
+#include <asm/cpu_device_id.h>
#include "speedstep-lib.h"
.attr = p4clockmod_attr,
};
+static const struct x86_cpu_id cpufreq_p4_id[] = {
+ { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ACC },
+ {}
+};
+
+/*
+ * Intentionally no MODULE_DEVICE_TABLE here: this driver should not
+ * be auto loaded. Please don't add one.
+ */
static int __init cpufreq_p4_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
int ret;
/*
* THERM_CONTROL is architectural for IA32 now, so
* we can rely on the capability checks
*/
- if (c->x86_vendor != X86_VENDOR_INTEL)
- return -ENODEV;
-
- if (!test_cpu_cap(c, X86_FEATURE_ACPI) ||
- !test_cpu_cap(c, X86_FEATURE_ACC))
+ if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI))
return -ENODEV;
ret = cpufreq_register_driver(&p4clockmod_driver);
#include <linux/timex.h>
#include <linux/io.h>
+#include <asm/cpu_device_id.h>
#include <asm/msr.h>
#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long
.attr = powernow_k6_attr,
};
+static const struct x86_cpu_id powernow_k6_ids[] = {
+ { X86_VENDOR_AMD, 5, 12 },
+ { X86_VENDOR_AMD, 5, 13 },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, powernow_k6_ids);
/**
* powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
*/
static int __init powernow_k6_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
-
- if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
- ((c->x86_model != 12) && (c->x86_model != 13)))
+ if (!x86_match_cpu(powernow_k6_ids))
return -ENODEV;
if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */
#include <asm/msr.h>
#include <asm/system.h>
+#include <asm/cpu_device_id.h>
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
#include <linux/acpi.h>
return delta < 5;
}
+static const struct x86_cpu_id powernow_k7_cpuids[] = {
+ { X86_VENDOR_AMD, 6, },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, powernow_k7_cpuids);
+
static int check_powernow(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
unsigned int maxei, eax, ebx, ecx, edx;
- if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) {
-#ifdef MODULE
- printk(KERN_INFO PFX "This module only works with "
- "AMD K7 CPUs\n");
-#endif
+ if (!x86_match_cpu(powernow_k7_cpuids))
return 0;
- }
/* Get maximum capabilities */
maxei = cpuid_eax(0x80000000);
#include <linux/delay.h>
#include <asm/msr.h>
+#include <asm/cpu_device_id.h>
#include <linux/acpi.h>
#include <linux/mutex.h>
return 0;
}
+static const struct x86_cpu_id powernow_k8_ids[] = {
+ /* IO based frequency switching */
+ { X86_VENDOR_AMD, 0xf },
+ /* MSR based frequency switching supported */
+ X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, powernow_k8_ids);
+
static void check_supported_cpu(void *_rc)
{
u32 eax, ebx, ecx, edx;
*rc = -ENODEV;
- if (__this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_AMD)
- return;
-
eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
- if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) &&
- ((eax & CPUID_XFAM) < CPUID_XFAM_10H))
- return;
if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
unsigned int i, supported_cpus = 0, cpu;
int rv;
+ if (!x86_match_cpu(powernow_k8_ids))
+ return -ENODEV;
+
for_each_online_cpu(i) {
int rc;
smp_call_function_single(i, check_supported_cpu, &rc, 1);
#include <linux/timex.h>
#include <linux/io.h>
+#include <asm/cpu_device_id.h>
#include <asm/msr.h>
#define MMCR_BASE 0xfffef000 /* The default base address */
.attr = sc520_freq_attr,
};
+static const struct x86_cpu_id sc520_ids[] = {
+ { X86_VENDOR_AMD, 4, 9 },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, sc520_ids);
static int __init sc520_freq_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
int err;
- /* Test if we have the right hardware */
- if (c->x86_vendor != X86_VENDOR_AMD ||
- c->x86 != 4 || c->x86_model != 9) {
- pr_debug("no Elan SC520 processor found!\n");
+ if (!x86_match_cpu(sc520_ids))
return -ENODEV;
- }
+
cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
if (!cpuctl) {
printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
#include <asm/msr.h>
#include <asm/processor.h>
#include <asm/cpufeature.h>
+#include <asm/cpu_device_id.h>
#define PFX "speedstep-centrino: "
#define MAINTAINER "cpufreq@vger.kernel.org"
.owner = THIS_MODULE,
};
+/*
+ * This doesn't replace the detailed checks above because
+ * the generic CPU IDs don't have a way to match for steppings
+ * or ASCII model IDs.
+ */
+static const struct x86_cpu_id centrino_ids[] = {
+ { X86_VENDOR_INTEL, 6, 9, X86_FEATURE_EST },
+ { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+ { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+ { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+ { X86_VENDOR_INTEL, 15, 3, X86_FEATURE_EST },
+ { X86_VENDOR_INTEL, 15, 4, X86_FEATURE_EST },
+ {}
+};
+#if 0
+/* Autoload or not? Do not for now. */
+MODULE_DEVICE_TABLE(x86cpu, centrino_ids);
+#endif
/**
* centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
*/
static int __init centrino_init(void)
{
- struct cpuinfo_x86 *cpu = &cpu_data(0);
-
- if (!cpu_has(cpu, X86_FEATURE_EST))
+ if (!x86_match_cpu(centrino_ids))
return -ENODEV;
-
return cpufreq_register_driver(¢rino_driver);
}
#include <linux/pci.h>
#include <linux/sched.h>
+#include <asm/cpu_device_id.h>
+
#include "speedstep-lib.h"
.attr = speedstep_attr,
};
+static const struct x86_cpu_id ss_smi_ids[] = {
+ { X86_VENDOR_INTEL, 6, 0xb, },
+ { X86_VENDOR_INTEL, 6, 0x8, },
+ { X86_VENDOR_INTEL, 15, 2 },
+ {}
+};
+#if 0
+/* Autoload or not? Do not for now. */
+MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids);
+#endif
/**
* speedstep_init - initializes the SpeedStep CPUFreq driver
*/
static int __init speedstep_init(void)
{
+ if (!x86_match_cpu(ss_smi_ids))
+ return -ENODEV;
+
/* detect processor */
speedstep_processor = speedstep_detect_processor();
if (!speedstep_processor) {
* DETECT SPEEDSTEP-CAPABLE PROCESSOR *
*********************************************************************/
+/* Keep in sync with the x86_cpu_id tables in the different modules */
unsigned int speedstep_detect_processor(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/ist.h>
+#include <asm/cpu_device_id.h>
#include "speedstep-lib.h"
.attr = speedstep_attr,
};
+static const struct x86_cpu_id ss_smi_ids[] = {
+ { X86_VENDOR_INTEL, 6, 0xb, },
+ { X86_VENDOR_INTEL, 6, 0x8, },
+ { X86_VENDOR_INTEL, 15, 2 },
+ {}
+};
+#if 0
+/* Not auto loaded currently */
+MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids);
+#endif
+
/**
* speedstep_init - initializes the SpeedStep CPUFreq driver
*
*/
static int __init speedstep_init(void)
{
+ if (!x86_match_cpu(ss_smi_ids))
+ return -ENODEV;
+
speedstep_processor = speedstep_detect_processor();
switch (speedstep_processor) {
#include <linux/percpu.h>
#include <linux/smp.h>
#include <linux/slab.h>
+#include <asm/cpu_device_id.h>
#include <asm/byteorder.h>
#include <asm/processor.h>
#include <asm/i387.h>
}
};
+static struct x86_cpu_id padlock_cpu_id[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_XCRYPT),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, padlock_cpu_id);
+
static int __init padlock_init(void)
{
int ret;
struct cpuinfo_x86 *c = &cpu_data(0);
- if (!cpu_has_xcrypt)
+ if (!x86_match_cpu(padlock_cpu_id))
return -ENODEV;
if (!cpu_has_xcrypt_enabled) {
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/scatterlist.h>
+#include <asm/cpu_device_id.h>
#include <asm/i387.h>
struct padlock_sha_desc {
}
};
+static struct x86_cpu_id padlock_sha_ids[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_PHE),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, padlock_sha_ids);
+
static int __init padlock_init(void)
{
int rc = -ENODEV;
struct shash_alg *sha1;
struct shash_alg *sha256;
- if (!cpu_has_phe) {
- printk(KERN_NOTICE PFX "VIA PadLock Hash Engine not detected.\n");
- return -ENODEV;
- }
-
- if (!cpu_has_phe_enabled) {
- printk(KERN_NOTICE PFX "VIA PadLock detected, but not enabled. Hmm, strange...\n");
+ if (!x86_match_cpu(padlock_sha_ids) || !cpu_has_phe_enabled)
return -ENODEV;
- }
/* Register the newly added algorithm module if on *
* VIA Nano processor, or else just do as before */
list_add_tail(&dynid->list, &hdrv->dyn_list);
spin_unlock(&hdrv->dyn_lock);
- ret = 0;
- if (get_driver(&hdrv->driver)) {
- ret = driver_attach(&hdrv->driver);
- put_driver(&hdrv->driver);
- }
+ ret = driver_attach(&hdrv->driver);
return ret ? : count;
}
void (*message_handler)(struct vmbus_channel_message_header *msg);
};
-#define MAX_MSG_TYPES 4
-#define MAX_NUM_DEVICE_CLASSES_SUPPORTED 8
-
-static const uuid_le
- supported_device_classes[MAX_NUM_DEVICE_CLASSES_SUPPORTED] = {
- /* {ba6163d9-04a1-4d29-b605-72e2ffb1dc7f} */
- /* Storage - SCSI */
- {
- .b = {
- 0xd9, 0x63, 0x61, 0xba, 0xa1, 0x04, 0x29, 0x4d,
- 0xb6, 0x05, 0x72, 0xe2, 0xff, 0xb1, 0xdc, 0x7f
- }
- },
-
- /* {F8615163-DF3E-46c5-913F-F2D2F965ED0E} */
- /* Network */
- {
- .b = {
- 0x63, 0x51, 0x61, 0xF8, 0x3E, 0xDF, 0xc5, 0x46,
- 0x91, 0x3F, 0xF2, 0xD2, 0xF9, 0x65, 0xED, 0x0E
- }
- },
-
- /* {CFA8B69E-5B4A-4cc0-B98B-8BA1A1F3F95A} */
- /* Input */
- {
- .b = {
- 0x9E, 0xB6, 0xA8, 0xCF, 0x4A, 0x5B, 0xc0, 0x4c,
- 0xB9, 0x8B, 0x8B, 0xA1, 0xA1, 0xF3, 0xF9, 0x5A
- }
- },
-
- /* {32412632-86cb-44a2-9b5c-50d1417354f5} */
- /* IDE */
- {
- .b = {
- 0x32, 0x26, 0x41, 0x32, 0xcb, 0x86, 0xa2, 0x44,
- 0x9b, 0x5c, 0x50, 0xd1, 0x41, 0x73, 0x54, 0xf5
- }
- },
- /* 0E0B6031-5213-4934-818B-38D90CED39DB */
- /* Shutdown */
- {
- .b = {
- 0x31, 0x60, 0x0B, 0X0E, 0x13, 0x52, 0x34, 0x49,
- 0x81, 0x8B, 0x38, 0XD9, 0x0C, 0xED, 0x39, 0xDB
- }
- },
- /* {9527E630-D0AE-497b-ADCE-E80AB0175CAF} */
- /* TimeSync */
- {
- .b = {
- 0x30, 0xe6, 0x27, 0x95, 0xae, 0xd0, 0x7b, 0x49,
- 0xad, 0xce, 0xe8, 0x0a, 0xb0, 0x17, 0x5c, 0xaf
- }
- },
- /* {57164f39-9115-4e78-ab55-382f3bd5422d} */
- /* Heartbeat */
- {
- .b = {
- 0x39, 0x4f, 0x16, 0x57, 0x15, 0x91, 0x78, 0x4e,
- 0xab, 0x55, 0x38, 0x2f, 0x3b, 0xd5, 0x42, 0x2d
- }
- },
- /* {A9A0F4E7-5A45-4d96-B827-8A841E8C03E6} */
- /* KVP */
- {
- .b = {
- 0xe7, 0xf4, 0xa0, 0xa9, 0x45, 0x5a, 0x96, 0x4d,
- 0xb8, 0x27, 0x8a, 0x84, 0x1e, 0x8c, 0x3, 0xe6
- }
- },
-
-};
-
/**
* vmbus_prep_negotiate_resp() - Create default response for Hyper-V Negotiate message
struct vmbus_channel *newchannel;
uuid_le *guidtype;
uuid_le *guidinstance;
- int i;
- int fsupported = 0;
offer = (struct vmbus_channel_offer_channel *)hdr;
- for (i = 0; i < MAX_NUM_DEVICE_CLASSES_SUPPORTED; i++) {
- if (!uuid_le_cmp(offer->offer.if_type,
- supported_device_classes[i])) {
- fsupported = 1;
- break;
- }
- }
-
- if (!fsupported)
- return;
guidtype = &offer->offer.if_type;
guidinstance = &offer->offer.if_instance;
union hv_x64_msr_hypercall_contents hypercall_msr;
void *virtaddr = NULL;
- memset(hv_context.synic_event_page, 0, sizeof(void *) * MAX_NUM_CPUS);
+ memset(hv_context.synic_event_page, 0, sizeof(void *) * NR_CPUS);
memset(hv_context.synic_message_page, 0,
- sizeof(void *) * MAX_NUM_CPUS);
+ sizeof(void *) * NR_CPUS);
if (!query_hypervisor_presence())
goto cleanup;
#include <linux/workqueue.h>
#include <linux/hyperv.h>
-#include "hv_kvp.h"
-
/*
{
struct cn_msg *msg;
+ struct hv_kvp_msg *kvp_msg;
+ char *version;
- msg = kzalloc(sizeof(*msg) + strlen(HV_DRV_VERSION) + 1 , GFP_ATOMIC);
+ msg = kzalloc(sizeof(*msg) + sizeof(struct hv_kvp_msg), GFP_ATOMIC);
if (msg) {
+ kvp_msg = (struct hv_kvp_msg *)msg->data;
+ version = kvp_msg->body.kvp_version;
msg->id.idx = CN_KVP_IDX;
msg->id.val = CN_KVP_VAL;
- msg->seq = KVP_REGISTER;
- strcpy(msg->data, HV_DRV_VERSION);
- msg->len = strlen(HV_DRV_VERSION) + 1;
+
+ kvp_msg->kvp_hdr.operation = KVP_OP_REGISTER;
+ strcpy(version, HV_DRV_VERSION);
+ msg->len = sizeof(struct hv_kvp_msg);
cn_netlink_send(msg, 0, GFP_ATOMIC);
kfree(msg);
}
static void
kvp_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
- struct hv_ku_msg *message;
+ struct hv_kvp_msg *message;
+ struct hv_kvp_msg_enumerate *data;
- message = (struct hv_ku_msg *)msg->data;
- if (msg->seq == KVP_REGISTER) {
+ message = (struct hv_kvp_msg *)msg->data;
+ if (message->kvp_hdr.operation == KVP_OP_REGISTER) {
pr_info("KVP: user-mode registering done.\n");
kvp_register();
}
- if (msg->seq == KVP_USER_SET) {
+ if (message->kvp_hdr.operation == KVP_OP_ENUMERATE) {
+ data = &message->body.kvp_enum_data;
/*
* Complete the transaction by forwarding the key value
* to the host. But first, cancel the timeout.
*/
if (cancel_delayed_work_sync(&kvp_work))
- kvp_respond_to_host(message->kvp_key,
- message->kvp_value,
- !strlen(message->kvp_key));
+ kvp_respond_to_host(data->data.key, data->data.value,
+ !strlen(data->data.key));
}
}
kvp_send_key(struct work_struct *dummy)
{
struct cn_msg *msg;
+ struct hv_kvp_msg *message;
int index = kvp_transaction.index;
msg = kzalloc(sizeof(*msg) + sizeof(struct hv_kvp_msg) , GFP_ATOMIC);
if (msg) {
msg->id.idx = CN_KVP_IDX;
msg->id.val = CN_KVP_VAL;
- msg->seq = KVP_KERNEL_GET;
- ((struct hv_ku_msg *)msg->data)->kvp_index = index;
- msg->len = sizeof(struct hv_ku_msg);
+
+ message = (struct hv_kvp_msg *)msg->data;
+ message->kvp_hdr.operation = KVP_OP_ENUMERATE;
+ message->body.kvp_enum_data.index = index;
+ msg->len = sizeof(struct hv_kvp_msg);
cn_netlink_send(msg, 0, GFP_ATOMIC);
kfree(msg);
}
kvp_msg = (struct hv_kvp_msg *)
&recv_buffer[sizeof(struct vmbuspipe_hdr) +
sizeof(struct icmsg_hdr)];
- kvp_data = &kvp_msg->kvp_data;
+ kvp_data = &kvp_msg->body.kvp_enum_data;
key_name = key;
/*
sizeof(struct vmbuspipe_hdr) +
sizeof(struct icmsg_hdr)];
- kvp_data = &kvp_msg->kvp_data;
+ kvp_data = &kvp_msg->body.kvp_enum_data;
/*
* We only support the "get" operation on
+++ /dev/null
-/*
- * An implementation of HyperV key value pair (KVP) functionality for Linux.
- *
- *
- * Copyright (C) 2010, Novell, Inc.
- * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef _KVP_H
-#define _KVP_H_
-
-/*
- * Maximum value size - used for both key names and value data, and includes
- * any applicable NULL terminators.
- *
- * Note: This limit is somewhat arbitrary, but falls easily within what is
- * supported for all native guests (back to Win 2000) and what is reasonable
- * for the IC KVP exchange functionality. Note that Windows Me/98/95 are
- * limited to 255 character key names.
- *
- * MSDN recommends not storing data values larger than 2048 bytes in the
- * registry.
- *
- * Note: This value is used in defining the KVP exchange message - this value
- * cannot be modified without affecting the message size and compatibility.
- */
-
-/*
- * bytes, including any null terminators
- */
-#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048)
-
-
-/*
- * Maximum key size - the registry limit for the length of an entry name
- * is 256 characters, including the null terminator
- */
-
-#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512)
-
-/*
- * In Linux, we implement the KVP functionality in two components:
- * 1) The kernel component which is packaged as part of the hv_utils driver
- * is responsible for communicating with the host and responsible for
- * implementing the host/guest protocol. 2) A user level daemon that is
- * responsible for data gathering.
- *
- * Host/Guest Protocol: The host iterates over an index and expects the guest
- * to assign a key name to the index and also return the value corresponding to
- * the key. The host will have atmost one KVP transaction outstanding at any
- * given point in time. The host side iteration stops when the guest returns
- * an error. Microsoft has specified the following mapping of key names to
- * host specified index:
- *
- * Index Key Name
- * 0 FullyQualifiedDomainName
- * 1 IntegrationServicesVersion
- * 2 NetworkAddressIPv4
- * 3 NetworkAddressIPv6
- * 4 OSBuildNumber
- * 5 OSName
- * 6 OSMajorVersion
- * 7 OSMinorVersion
- * 8 OSVersion
- * 9 ProcessorArchitecture
- *
- * The Windows host expects the Key Name and Key Value to be encoded in utf16.
- *
- * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the
- * data gathering functionality in a user mode daemon. The user level daemon
- * is also responsible for binding the key name to the index as well. The
- * kernel and user-level daemon communicate using a connector channel.
- *
- * The user mode component first registers with the
- * the kernel component. Subsequently, the kernel component requests, data
- * for the specified keys. In response to this message the user mode component
- * fills in the value corresponding to the specified key. We overload the
- * sequence field in the cn_msg header to define our KVP message types.
- *
- *
- * The kernel component simply acts as a conduit for communication between the
- * Windows host and the user-level daemon. The kernel component passes up the
- * index received from the Host to the user-level daemon. If the index is
- * valid (supported), the corresponding key as well as its
- * value (both are strings) is returned. If the index is invalid
- * (not supported), a NULL key string is returned.
- */
-
-/*
- *
- * The following definitions are shared with the user-mode component; do not
- * change any of this without making the corresponding changes in
- * the KVP user-mode component.
- */
-
-#define CN_KVP_VAL 0x1 /* This supports queries from the kernel */
-#define CN_KVP_USER_VAL 0x2 /* This supports queries from the user */
-
-enum hv_ku_op {
- KVP_REGISTER = 0, /* Register the user mode component */
- KVP_KERNEL_GET, /* Kernel is requesting the value */
- KVP_KERNEL_SET, /* Kernel is providing the value */
- KVP_USER_GET, /* User is requesting the value */
- KVP_USER_SET /* User is providing the value */
-};
-
-struct hv_ku_msg {
- __u32 kvp_index; /* Key index */
- __u8 kvp_key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; /* Key name */
- __u8 kvp_value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; /* Key value */
-};
-
-
-
-
-#ifdef __KERNEL__
-
-/*
- * Registry value types.
- */
-
-#define REG_SZ 1
-
-enum hv_kvp_exchg_op {
- KVP_OP_GET = 0,
- KVP_OP_SET,
- KVP_OP_DELETE,
- KVP_OP_ENUMERATE,
- KVP_OP_COUNT /* Number of operations, must be last. */
-};
-
-enum hv_kvp_exchg_pool {
- KVP_POOL_EXTERNAL = 0,
- KVP_POOL_GUEST,
- KVP_POOL_AUTO,
- KVP_POOL_AUTO_EXTERNAL,
- KVP_POOL_AUTO_INTERNAL,
- KVP_POOL_COUNT /* Number of pools, must be last. */
-};
-
-struct hv_kvp_hdr {
- u8 operation;
- u8 pool;
-};
-
-struct hv_kvp_exchg_msg_value {
- u32 value_type;
- u32 key_size;
- u32 value_size;
- u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
- u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
-};
-
-struct hv_kvp_msg_enumerate {
- u32 index;
- struct hv_kvp_exchg_msg_value data;
-};
-
-struct hv_kvp_msg {
- struct hv_kvp_hdr kvp_hdr;
- struct hv_kvp_msg_enumerate kvp_data;
-};
-
-int hv_kvp_init(struct hv_util_service *);
-void hv_kvp_deinit(void);
-void hv_kvp_onchannelcallback(void *);
-
-#endif /* __KERNEL__ */
-#endif /* _KVP_H */
-
#include <linux/reboot.h>
#include <linux/hyperv.h>
-#include "hv_kvp.h"
-
-
static void shutdown_onchannelcallback(void *context);
static struct hv_util_service util_shutdown = {
.util_cb = shutdown_onchannelcallback,
},
};
-#define MAX_NUM_CPUS 32
struct hv_input_signal_event_buffer {
/* 8-bytes aligned of the buffer above */
struct hv_input_signal_event *signal_event_param;
- void *synic_message_page[MAX_NUM_CPUS];
- void *synic_event_page[MAX_NUM_CPUS];
+ void *synic_message_page[NR_CPUS];
+ void *synic_event_page[NR_CPUS];
};
extern struct hv_context hv_context;
#include <linux/moduleparam.h>
#include <asm/msr.h>
#include <asm/processor.h>
+#include <asm/cpu_device_id.h>
#define DRVNAME "coretemp"
.notifier_call = coretemp_cpu_callback,
};
+static const struct x86_cpu_id coretemp_ids[] = {
+ { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTS },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, coretemp_ids);
+
static int __init coretemp_init(void)
{
int i, err = -ENODEV;
- /* quick check if we run Intel */
- if (cpu_data(0).x86_vendor != X86_VENDOR_INTEL)
- goto exit;
+ /*
+ * CPUID.06H.EAX[0] indicates whether the CPU has thermal
+ * sensors. We check this bit only, all the early CPUs
+ * without thermal sensors will be filtered out.
+ */
+ if (!x86_match_cpu(coretemp_ids))
+ return -ENODEV;
err = platform_driver_register(&coretemp_driver);
if (err)
#include <linux/cpu.h>
#include <asm/msr.h>
#include <asm/processor.h>
+#include <asm/cpu_device_id.h>
#define DRVNAME "via_cputemp"
.notifier_call = via_cputemp_cpu_callback,
};
+static const struct x86_cpu_id cputemp_ids[] = {
+ { X86_VENDOR_CENTAUR, 6, 0xa, }, /* C7 A */
+ { X86_VENDOR_CENTAUR, 6, 0xd, }, /* C7 D */
+ { X86_VENDOR_CENTAUR, 6, 0xf, }, /* Nano */
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, cputemp_ids);
+
static int __init via_cputemp_init(void)
{
int i, err;
- if (cpu_data(0).x86_vendor != X86_VENDOR_CENTAUR) {
- printk(KERN_DEBUG DRVNAME ": Not a VIA CPU\n");
- err = -ENODEV;
- goto exit;
- }
+ if (!x86_match_cpu(cputemp_ids))
+ return -ENODEV;
err = platform_driver_register(&via_cputemp_driver);
if (err)
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/module.h>
+#include <asm/cpu_device_id.h>
#include <asm/mwait.h>
#include <asm/msr.h>
/* Reliable LAPIC Timer States, bit 1 for C1 etc. */
static unsigned int lapic_timer_reliable_states = (1 << 1); /* Default to only C1 */
+struct idle_cpu {
+ struct cpuidle_state *state_table;
+
+ /*
+ * Hardware C-state auto-demotion may not always be optimal.
+ * Indicate which enable bits to clear here.
+ */
+ unsigned long auto_demotion_disable_flags;
+};
+
+static const struct idle_cpu *icpu;
static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
static int intel_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
static struct cpuidle_state *cpuidle_state_table;
-/*
- * Hardware C-state auto-demotion may not always be optimal.
- * Indicate which enable bits to clear here.
- */
-static unsigned long long auto_demotion_disable_flags;
-
/*
* Set this flag for states where the HW flushes the TLB for us
* and so we don't need cross-calls to keep it consistent.
unsigned long long msr_bits;
rdmsrl(MSR_NHM_SNB_PKG_CST_CFG_CTL, msr_bits);
- msr_bits &= ~auto_demotion_disable_flags;
+ msr_bits &= ~(icpu->auto_demotion_disable_flags);
wrmsrl(MSR_NHM_SNB_PKG_CST_CFG_CTL, msr_bits);
}
+static const struct idle_cpu idle_cpu_nehalem = {
+ .state_table = nehalem_cstates,
+ .auto_demotion_disable_flags = NHM_C1_AUTO_DEMOTE | NHM_C3_AUTO_DEMOTE,
+};
+
+static const struct idle_cpu idle_cpu_atom = {
+ .state_table = atom_cstates,
+};
+
+static const struct idle_cpu idle_cpu_lincroft = {
+ .state_table = atom_cstates,
+ .auto_demotion_disable_flags = ATM_LNC_C6_AUTO_DEMOTE,
+};
+
+static const struct idle_cpu idle_cpu_snb = {
+ .state_table = snb_cstates,
+};
+
+#define ICPU(model, cpu) \
+ { X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu }
+
+static const struct x86_cpu_id intel_idle_ids[] = {
+ ICPU(0x1a, idle_cpu_nehalem),
+ ICPU(0x1e, idle_cpu_nehalem),
+ ICPU(0x1f, idle_cpu_nehalem),
+ ICPU(0x25, idle_cpu_nehalem),
+ ICPU(0x2c, idle_cpu_nehalem),
+ ICPU(0x2e, idle_cpu_nehalem),
+ ICPU(0x1c, idle_cpu_atom),
+ ICPU(0x26, idle_cpu_lincroft),
+ ICPU(0x2f, idle_cpu_nehalem),
+ ICPU(0x2a, idle_cpu_snb),
+ ICPU(0x2d, idle_cpu_snb),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);
+
/*
* intel_idle_probe()
*/
static int intel_idle_probe(void)
{
unsigned int eax, ebx, ecx;
+ const struct x86_cpu_id *id;
if (max_cstate == 0) {
pr_debug(PREFIX "disabled\n");
return -EPERM;
}
- if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
- return -ENODEV;
-
- if (!boot_cpu_has(X86_FEATURE_MWAIT))
+ id = x86_match_cpu(intel_idle_ids);
+ if (!id) {
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ boot_cpu_data.x86 == 6)
+ pr_debug(PREFIX "does not run on family %d model %d\n",
+ boot_cpu_data.x86, boot_cpu_data.x86_model);
return -ENODEV;
+ }
if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
return -ENODEV;
pr_debug(PREFIX "MWAIT substates: 0x%x\n", mwait_substates);
-
- if (boot_cpu_data.x86 != 6) /* family 6 */
- return -ENODEV;
-
- switch (boot_cpu_data.x86_model) {
-
- case 0x1A: /* Core i7, Xeon 5500 series */
- case 0x1E: /* Core i7 and i5 Processor - Lynnfield Jasper Forest */
- case 0x1F: /* Core i7 and i5 Processor - Nehalem */
- case 0x2E: /* Nehalem-EX Xeon */
- case 0x2F: /* Westmere-EX Xeon */
- case 0x25: /* Westmere */
- case 0x2C: /* Westmere */
- cpuidle_state_table = nehalem_cstates;
- auto_demotion_disable_flags =
- (NHM_C1_AUTO_DEMOTE | NHM_C3_AUTO_DEMOTE);
- break;
-
- case 0x1C: /* 28 - Atom Processor */
- cpuidle_state_table = atom_cstates;
- break;
-
- case 0x26: /* 38 - Lincroft Atom Processor */
- cpuidle_state_table = atom_cstates;
- auto_demotion_disable_flags = ATM_LNC_C6_AUTO_DEMOTE;
- break;
-
- case 0x2A: /* SNB */
- case 0x2D: /* SNB Xeon */
- cpuidle_state_table = snb_cstates;
- break;
-
- default:
- pr_debug(PREFIX "does not run on family %d model %d\n",
- boot_cpu_data.x86, boot_cpu_data.x86_model);
- return -ENODEV;
- }
+ icpu = (const struct idle_cpu *)id->driver_data;
+ cpuidle_state_table = icpu->state_table;
if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
lapic_timer_reliable_states = LAPIC_TIMER_ALWAYS_RELIABLE;
drv->state_count += 1;
}
- if (auto_demotion_disable_flags)
+ if (icpu->auto_demotion_disable_flags)
on_each_cpu(auto_demotion_disable, NULL, 1);
return 0;
return -EIO;
}
- if (auto_demotion_disable_flags)
+ if (icpu->auto_demotion_disable_flags)
smp_call_function_single(cpu, auto_demotion_disable, NULL, 1);
return 0;
} else if ((drv = driver_find(buf, &gameport_bus)) != NULL) {
gameport_disconnect_port(gameport);
error = gameport_bind_driver(gameport, to_gameport_driver(drv));
- put_driver(drv);
} else {
error = -EINVAL;
}
} else if ((drv = driver_find(buf, &serio_bus)) != NULL) {
serio_disconnect_port(serio);
error = serio_bind_driver(serio, to_serio_driver(drv));
- put_driver(drv);
serio_remove_duplicate_events(serio, SERIO_RESCAN_PORT);
} else {
error = -EINVAL;
drv = driver_find("cx18", &pci_bus_type);
ret = driver_for_each_device(drv, NULL, NULL, cx18_alsa_exit_callback);
- put_driver(drv);
cx18_ext_init = NULL;
printk(KERN_INFO "cx18-alsa: module unload complete\n");
drv = driver_find("ivtv", &pci_bus_type);
err = driver_for_each_device(drv, NULL, ®istered, ivtvfb_callback_init);
- put_driver(drv);
if (!registered) {
printk(KERN_ERR "ivtvfb: no cards found\n");
return -ENODEV;
drv = driver_find("ivtv", &pci_bus_type);
err = driver_for_each_device(drv, NULL, NULL, ivtvfb_callback_cleanup);
- put_driver(drv);
}
module_init(ivtvfb_init);
return -ENODEV;
ret = driver_for_each_device(driver, NULL, fmd,
fimc_register_callback);
- put_driver(driver);
if (ret)
return ret;
driver = driver_find(CSIS_DRIVER_NAME, &platform_bus_type);
- if (driver) {
+ if (driver)
ret = driver_for_each_device(driver, NULL, fmd,
csis_register_callback);
- put_driver(driver);
- }
return ret;
}
}
done:
- put_driver(drv);
return sd;
}
phydev = to_phy_device(dev);
- /* Make sure the driver is held.
- * XXX -- Is this correct? */
- drv = get_driver(phydev->dev.driver);
+ drv = phydev->dev.driver;
phydrv = to_phy_driver(drv);
phydev->drv = phydrv;
if (phydev->drv->remove)
phydev->drv->remove(phydev);
-
- put_driver(dev->driver);
phydev->drv = NULL;
return 0;
list_add_tail(&dynid->node, &drv->dynids.list);
spin_unlock(&drv->dynids.lock);
- get_driver(&drv->driver);
retval = driver_attach(&drv->driver);
- put_driver(&drv->driver);
return retval;
}
static DRIVER_ATTR(remove_id, S_IWUSR, NULL, store_remove_id);
static int
-pci_create_newid_file(struct pci_driver *drv)
+pci_create_newid_files(struct pci_driver *drv)
{
int error = 0;
- if (drv->probe != NULL)
- error = driver_create_file(&drv->driver, &driver_attr_new_id);
- return error;
-}
-
-static void pci_remove_newid_file(struct pci_driver *drv)
-{
- driver_remove_file(&drv->driver, &driver_attr_new_id);
-}
-static int
-pci_create_removeid_file(struct pci_driver *drv)
-{
- int error = 0;
- if (drv->probe != NULL)
- error = driver_create_file(&drv->driver,&driver_attr_remove_id);
+ if (drv->probe != NULL) {
+ error = driver_create_file(&drv->driver, &driver_attr_new_id);
+ if (error == 0) {
+ error = driver_create_file(&drv->driver,
+ &driver_attr_remove_id);
+ if (error)
+ driver_remove_file(&drv->driver,
+ &driver_attr_new_id);
+ }
+ }
return error;
}
-static void pci_remove_removeid_file(struct pci_driver *drv)
+static void pci_remove_newid_files(struct pci_driver *drv)
{
driver_remove_file(&drv->driver, &driver_attr_remove_id);
+ driver_remove_file(&drv->driver, &driver_attr_new_id);
}
#else /* !CONFIG_HOTPLUG */
-static inline int pci_create_newid_file(struct pci_driver *drv)
+static inline int pci_create_newid_files(struct pci_driver *drv)
{
return 0;
}
-static inline void pci_remove_newid_file(struct pci_driver *drv) {}
-static inline int pci_create_removeid_file(struct pci_driver *drv)
-{
- return 0;
-}
-static inline void pci_remove_removeid_file(struct pci_driver *drv) {}
+static inline void pci_remove_newid_files(struct pci_driver *drv) {}
#endif
/**
if (error)
goto out;
- error = pci_create_newid_file(drv);
+ error = pci_create_newid_files(drv);
if (error)
goto out_newid;
-
- error = pci_create_removeid_file(drv);
- if (error)
- goto out_removeid;
out:
return error;
-out_removeid:
- pci_remove_newid_file(drv);
out_newid:
driver_unregister(&drv->driver);
goto out;
void
pci_unregister_driver(struct pci_driver *drv)
{
- pci_remove_removeid_file(drv);
- pci_remove_newid_file(drv);
+ pci_remove_newid_files(drv);
driver_unregister(&drv->driver);
pci_free_dynids(drv);
}
}
pdrv = pcidev->driver;
- if (get_driver(&pdrv->driver)) {
+ if (pdrv) {
if (pdrv->err_handler && pdrv->err_handler->error_detected) {
dev_dbg(&pcidev->dev,
"trying to call AER service\n");
}
}
}
- put_driver(&pdrv->driver);
}
if (!flag)
result = PCI_ERS_RESULT_NONE;
list_add_tail(&dynid->node, &pdrv->dynids.list);
mutex_unlock(&pdrv->dynids.lock);
- if (get_driver(&pdrv->drv)) {
- retval = driver_attach(&pdrv->drv);
- put_driver(&pdrv->drv);
- }
+ retval = driver_attach(&pdrv->drv);
if (retval)
return retval;
return error;
}
+static void
+pcmcia_remove_newid_file(struct pcmcia_driver *drv)
+{
+ driver_remove_file(&drv->drv, &driver_attr_new_id);
+}
/**
* pcmcia_register_driver - register a PCMCIA driver with the bus core
void pcmcia_unregister_driver(struct pcmcia_driver *driver)
{
pr_debug("unregistering driver %s\n", driver->name);
+ pcmcia_remove_newid_file(driver);
driver_unregister(&driver->drv);
pcmcia_free_dynids(driver);
}
help
Say Y here to enable support for batteries with ds2780 chip.
+config BATTERY_DS2781
+ tristate "2781 battery driver"
+ depends on HAS_IOMEM
+ select W1
+ select W1_SLAVE_DS2781
+ help
+ If you enable this you will have the DS2781 battery driver support.
+
+ The battery monitor chip is used in many batteries/devices
+ as the one who is responsible for charging/discharging/monitoring
+ Li+ batteries.
+
+ If you are unsure, say N.
+
config BATTERY_DS2782
tristate "DS2782/DS2786 standalone gas-gauge"
depends on I2C
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
+obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
--- /dev/null
+/*
+ * 1-wire client/driver for the Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC
+ *
+ * Author: Renata Sayakhova <renata@oktetlabs.ru>
+ *
+ * Based on ds2780_battery drivers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+
+#include "../w1/w1.h"
+#include "../w1/slaves/w1_ds2781.h"
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2781_CURRENT_UNITS 1563
+/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */
+#define DS2781_CHARGE_UNITS 6250
+/* Number of bytes in user EEPROM space */
+#define DS2781_USER_EEPROM_SIZE (DS2781_EEPROM_BLOCK0_END - \
+ DS2781_EEPROM_BLOCK0_START + 1)
+/* Number of bytes in parameter EEPROM space */
+#define DS2781_PARAM_EEPROM_SIZE (DS2781_EEPROM_BLOCK1_END - \
+ DS2781_EEPROM_BLOCK1_START + 1)
+
+struct ds2781_device_info {
+ struct device *dev;
+ struct power_supply bat;
+ struct device *w1_dev;
+ struct task_struct *mutex_holder;
+};
+
+enum current_types {
+ CURRENT_NOW,
+ CURRENT_AVG,
+};
+
+static const char model[] = "DS2781";
+static const char manufacturer[] = "Maxim/Dallas";
+
+static inline struct ds2781_device_info *
+to_ds2781_device_info(struct power_supply *psy)
+{
+ return container_of(psy, struct ds2781_device_info, bat);
+}
+
+static inline struct power_supply *to_power_supply(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+
+static inline int ds2781_battery_io(struct ds2781_device_info *dev_info,
+ char *buf, int addr, size_t count, int io)
+{
+ if (dev_info->mutex_holder == current)
+ return w1_ds2781_io_nolock(dev_info->w1_dev, buf, addr,
+ count, io);
+ else
+ return w1_ds2781_io(dev_info->w1_dev, buf, addr, count, io);
+}
+
+int w1_ds2781_read(struct ds2781_device_info *dev_info, char *buf,
+ int addr, size_t count)
+{
+ return ds2781_battery_io(dev_info, buf, addr, count, 0);
+}
+
+static inline int ds2781_read8(struct ds2781_device_info *dev_info, u8 *val,
+ int addr)
+{
+ return ds2781_battery_io(dev_info, val, addr, sizeof(u8), 0);
+}
+
+static int ds2781_read16(struct ds2781_device_info *dev_info, s16 *val,
+ int addr)
+{
+ int ret;
+ u8 raw[2];
+
+ ret = ds2781_battery_io(dev_info, raw, addr, sizeof(raw), 0);
+ if (ret < 0)
+ return ret;
+
+ *val = (raw[0] << 8) | raw[1];
+
+ return 0;
+}
+
+static inline int ds2781_read_block(struct ds2781_device_info *dev_info,
+ u8 *val, int addr, size_t count)
+{
+ return ds2781_battery_io(dev_info, val, addr, count, 0);
+}
+
+static inline int ds2781_write(struct ds2781_device_info *dev_info, u8 *val,
+ int addr, size_t count)
+{
+ return ds2781_battery_io(dev_info, val, addr, count, 1);
+}
+
+static inline int ds2781_store_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_COPY_DATA);
+}
+
+static inline int ds2781_recall_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_RECALL_DATA);
+}
+
+static int ds2781_save_eeprom(struct ds2781_device_info *dev_info, int reg)
+{
+ int ret;
+
+ ret = ds2781_store_eeprom(dev_info->w1_dev, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_recall_eeprom(dev_info->w1_dev, reg);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Set sense resistor value in mhos */
+static int ds2781_set_sense_register(struct ds2781_device_info *dev_info,
+ u8 conductance)
+{
+ int ret;
+
+ ret = ds2781_write(dev_info, &conductance,
+ DS2781_RSNSP, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return ds2781_save_eeprom(dev_info, DS2781_RSNSP);
+}
+
+/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2781_get_rsgain_register(struct ds2781_device_info *dev_info,
+ u16 *rsgain)
+{
+ return ds2781_read16(dev_info, rsgain, DS2781_RSGAIN_MSB);
+}
+
+/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2781_set_rsgain_register(struct ds2781_device_info *dev_info,
+ u16 rsgain)
+{
+ int ret;
+ u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
+
+ ret = ds2781_write(dev_info, raw,
+ DS2781_RSGAIN_MSB, sizeof(raw));
+ if (ret < 0)
+ return ret;
+
+ return ds2781_save_eeprom(dev_info, DS2781_RSGAIN_MSB);
+}
+
+static int ds2781_get_voltage(struct ds2781_device_info *dev_info,
+ int *voltage_uV)
+{
+ int ret;
+ char val[2];
+ int voltage_raw;
+
+ ret = w1_ds2781_read(dev_info, val, DS2781_VOLT_MSB, 2 * sizeof(u8));
+ if (ret < 0)
+ return ret;
+ /*
+ * The voltage value is located in 10 bits across the voltage MSB
+ * and LSB registers in two's compliment form
+ * Sign bit of the voltage value is in bit 7 of the voltage MSB register
+ * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
+ * voltage MSB register
+ * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
+ * voltage LSB register
+ */
+ voltage_raw = (val[0] << 3) |
+ (val[1] >> 5);
+
+ /* DS2781 reports voltage in units of 9.76mV, but the battery class
+ * reports in units of uV, so convert by multiplying by 9760. */
+ *voltage_uV = voltage_raw * 9760;
+
+ return 0;
+}
+
+static int ds2781_get_temperature(struct ds2781_device_info *dev_info,
+ int *temp)
+{
+ int ret;
+ char val[2];
+ int temp_raw;
+
+ ret = w1_ds2781_read(dev_info, val, DS2781_TEMP_MSB, 2 * sizeof(u8));
+ if (ret < 0)
+ return ret;
+ /*
+ * The temperature value is located in 10 bits across the temperature
+ * MSB and LSB registers in two's compliment form
+ * Sign bit of the temperature value is in bit 7 of the temperature
+ * MSB register
+ * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
+ * temperature MSB register
+ * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
+ * temperature LSB register
+ */
+ temp_raw = ((val[0]) << 3) |
+ (val[1] >> 5);
+ *temp = temp_raw + (temp_raw / 4);
+
+ return 0;
+}
+
+static int ds2781_get_current(struct ds2781_device_info *dev_info,
+ enum current_types type, int *current_uA)
+{
+ int ret, sense_res;
+ s16 current_raw;
+ u8 sense_res_raw, reg_msb;
+
+ /*
+ * The units of measurement for current are dependent on the value of
+ * the sense resistor.
+ */
+ ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP);
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -EINVAL;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ if (type == CURRENT_NOW)
+ reg_msb = DS2781_CURRENT_MSB;
+ else if (type == CURRENT_AVG)
+ reg_msb = DS2781_IAVG_MSB;
+ else
+ return -EINVAL;
+
+ /*
+ * The current value is located in 16 bits across the current MSB
+ * and LSB registers in two's compliment form
+ * Sign bit of the current value is in bit 7 of the current MSB register
+ * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
+ * MSB register
+ * Bits 7 - 0 of the current value are in bits 7 - 0 of the current
+ * LSB register
+ */
+ ret = ds2781_read16(dev_info, ¤t_raw, reg_msb);
+ if (ret < 0)
+ return ret;
+
+ *current_uA = current_raw * (DS2781_CURRENT_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2781_get_accumulated_current(struct ds2781_device_info *dev_info,
+ int *accumulated_current)
+{
+ int ret, sense_res;
+ s16 current_raw;
+ u8 sense_res_raw;
+
+ /*
+ * The units of measurement for accumulated current are dependent on
+ * the value of the sense resistor.
+ */
+ ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP);
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -EINVAL;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ /*
+ * The ACR value is located in 16 bits across the ACR MSB and
+ * LSB registers
+ * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR
+ * MSB register
+ * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
+ * LSB register
+ */
+ ret = ds2781_read16(dev_info, ¤t_raw, DS2781_ACR_MSB);
+ if (ret < 0)
+ return ret;
+
+ *accumulated_current = current_raw * (DS2781_CHARGE_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2781_get_capacity(struct ds2781_device_info *dev_info,
+ int *capacity)
+{
+ int ret;
+ u8 raw;
+
+ ret = ds2781_read8(dev_info, &raw, DS2781_RARC);
+ if (ret < 0)
+ return ret;
+
+ *capacity = raw;
+ return 0;
+}
+
+static int ds2781_get_status(struct ds2781_device_info *dev_info, int *status)
+{
+ int ret, current_uA, capacity;
+
+ ret = ds2781_get_current(dev_info, CURRENT_NOW, ¤t_uA);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_get_capacity(dev_info, &capacity);
+ if (ret < 0)
+ return ret;
+
+ if (power_supply_am_i_supplied(&dev_info->bat)) {
+ if (capacity == 100)
+ *status = POWER_SUPPLY_STATUS_FULL;
+ else if (current_uA > 50000)
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ return 0;
+}
+
+static int ds2781_get_charge_now(struct ds2781_device_info *dev_info,
+ int *charge_now)
+{
+ int ret;
+ u16 charge_raw;
+
+ /*
+ * The RAAC value is located in 16 bits across the RAAC MSB and
+ * LSB registers
+ * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC
+ * MSB register
+ * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
+ * LSB register
+ */
+ ret = ds2781_read16(dev_info, &charge_raw, DS2781_RAAC_MSB);
+ if (ret < 0)
+ return ret;
+
+ *charge_now = charge_raw * 1600;
+ return 0;
+}
+
+static int ds2781_get_control_register(struct ds2781_device_info *dev_info,
+ u8 *control_reg)
+{
+ return ds2781_read8(dev_info, control_reg, DS2781_CONTROL);
+}
+
+static int ds2781_set_control_register(struct ds2781_device_info *dev_info,
+ u8 control_reg)
+{
+ int ret;
+
+ ret = ds2781_write(dev_info, &control_reg,
+ DS2781_CONTROL, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return ds2781_save_eeprom(dev_info, DS2781_CONTROL);
+}
+
+static int ds2781_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ds2781_get_voltage(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = ds2781_get_temperature(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = model;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = manufacturer;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ds2781_get_current(dev_info, CURRENT_NOW, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = ds2781_get_current(dev_info, CURRENT_AVG, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = ds2781_get_status(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = ds2781_get_capacity(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = ds2781_get_accumulated_current(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = ds2781_get_charge_now(dev_info, &val->intval);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property ds2781_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static ssize_t ds2781_get_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 control_reg;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ /* Get power mode */
+ ret = ds2781_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n",
+ !!(control_reg & DS2781_CONTROL_PMOD));
+}
+
+static ssize_t ds2781_set_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 control_reg, new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ /* Set power mode */
+ ret = ds2781_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ if (new_setting)
+ control_reg |= DS2781_CONTROL_PMOD;
+ else
+ control_reg &= ~DS2781_CONTROL_PMOD;
+
+ ret = ds2781_set_control_register(dev_info, control_reg);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_get_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sense_resistor;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = ds2781_read8(dev_info, &sense_resistor, DS2781_RSNSP);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sense_resistor);
+ return ret;
+}
+
+static ssize_t ds2781_set_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_set_sense_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_get_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u16 rsgain;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = ds2781_get_rsgain_register(dev_info, &rsgain);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", rsgain);
+}
+
+static ssize_t ds2781_set_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u16 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = kstrtou16(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ /* Gain can only be from 0 to 1.999 in steps of .001 */
+ if (new_setting > 1999) {
+ dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2781_set_rsgain_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_get_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sfr;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = ds2781_read8(dev_info, &sfr, DS2781_SFR);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sfr & DS2781_SFR_PIOSC);
+ return ret;
+}
+
+static ssize_t ds2781_set_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2781_write(dev_info, &new_setting,
+ DS2781_SFR, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_read_param_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ count = min_t(loff_t, count,
+ DS2781_EEPROM_BLOCK1_END -
+ DS2781_EEPROM_BLOCK1_START + 1 - off);
+
+ return ds2781_read_block(dev_info, buf,
+ DS2781_EEPROM_BLOCK1_START + off, count);
+}
+
+static ssize_t ds2781_write_param_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+ int ret;
+
+ count = min_t(loff_t, count,
+ DS2781_EEPROM_BLOCK1_END -
+ DS2781_EEPROM_BLOCK1_START + 1 - off);
+
+ ret = ds2781_write(dev_info, buf,
+ DS2781_EEPROM_BLOCK1_START + off, count);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK1_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static struct bin_attribute ds2781_param_eeprom_bin_attr = {
+ .attr = {
+ .name = "param_eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = DS2781_EEPROM_BLOCK1_END - DS2781_EEPROM_BLOCK1_START + 1,
+ .read = ds2781_read_param_eeprom_bin,
+ .write = ds2781_write_param_eeprom_bin,
+};
+
+static ssize_t ds2781_read_user_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ count = min_t(loff_t, count,
+ DS2781_EEPROM_BLOCK0_END -
+ DS2781_EEPROM_BLOCK0_START + 1 - off);
+
+ return ds2781_read_block(dev_info, buf,
+ DS2781_EEPROM_BLOCK0_START + off, count);
+
+}
+
+static ssize_t ds2781_write_user_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+ int ret;
+
+ count = min_t(loff_t, count,
+ DS2781_EEPROM_BLOCK0_END -
+ DS2781_EEPROM_BLOCK0_START + 1 - off);
+
+ ret = ds2781_write(dev_info, buf,
+ DS2781_EEPROM_BLOCK0_START + off, count);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK0_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static struct bin_attribute ds2781_user_eeprom_bin_attr = {
+ .attr = {
+ .name = "user_eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = DS2781_EEPROM_BLOCK0_END - DS2781_EEPROM_BLOCK0_START + 1,
+ .read = ds2781_read_user_eeprom_bin,
+ .write = ds2781_write_user_eeprom_bin,
+};
+
+static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2781_get_pmod_enabled,
+ ds2781_set_pmod_enabled);
+static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR,
+ ds2781_get_sense_resistor_value, ds2781_set_sense_resistor_value);
+static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2781_get_rsgain_setting,
+ ds2781_set_rsgain_setting);
+static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2781_get_pio_pin,
+ ds2781_set_pio_pin);
+
+
+static struct attribute *ds2781_attributes[] = {
+ &dev_attr_pmod_enabled.attr,
+ &dev_attr_sense_resistor_value.attr,
+ &dev_attr_rsgain_setting.attr,
+ &dev_attr_pio_pin.attr,
+ NULL
+};
+
+static const struct attribute_group ds2781_attr_group = {
+ .attrs = ds2781_attributes,
+};
+
+static int __devinit ds2781_battery_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct ds2781_device_info *dev_info;
+
+ dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+ if (!dev_info) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, dev_info);
+
+ dev_info->dev = &pdev->dev;
+ dev_info->w1_dev = pdev->dev.parent;
+ dev_info->bat.name = dev_name(&pdev->dev);
+ dev_info->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ dev_info->bat.properties = ds2781_battery_props;
+ dev_info->bat.num_properties = ARRAY_SIZE(ds2781_battery_props);
+ dev_info->bat.get_property = ds2781_battery_get_property;
+ dev_info->mutex_holder = current;
+
+ ret = power_supply_register(&pdev->dev, &dev_info->bat);
+ if (ret) {
+ dev_err(dev_info->dev, "failed to register battery\n");
+ goto fail_free_info;
+ }
+
+ ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
+ if (ret) {
+ dev_err(dev_info->dev, "failed to create sysfs group\n");
+ goto fail_unregister;
+ }
+
+ ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj,
+ &ds2781_param_eeprom_bin_attr);
+ if (ret) {
+ dev_err(dev_info->dev,
+ "failed to create param eeprom bin file");
+ goto fail_remove_group;
+ }
+
+ ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj,
+ &ds2781_user_eeprom_bin_attr);
+ if (ret) {
+ dev_err(dev_info->dev,
+ "failed to create user eeprom bin file");
+ goto fail_remove_bin_file;
+ }
+
+ dev_info->mutex_holder = NULL;
+
+ return 0;
+
+fail_remove_bin_file:
+ sysfs_remove_bin_file(&dev_info->bat.dev->kobj,
+ &ds2781_param_eeprom_bin_attr);
+fail_remove_group:
+ sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
+fail_unregister:
+ power_supply_unregister(&dev_info->bat);
+fail_free_info:
+ kfree(dev_info);
+fail:
+ return ret;
+}
+
+static int __devexit ds2781_battery_remove(struct platform_device *pdev)
+{
+ struct ds2781_device_info *dev_info = platform_get_drvdata(pdev);
+
+ dev_info->mutex_holder = current;
+
+ /* remove attributes */
+ sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
+
+ power_supply_unregister(&dev_info->bat);
+
+ kfree(dev_info);
+ return 0;
+}
+
+static struct platform_driver ds2781_battery_driver = {
+ .driver = {
+ .name = "ds2781-battery",
+ },
+ .probe = ds2781_battery_probe,
+ .remove = __devexit_p(ds2781_battery_remove),
+};
+
+static int __init ds2781_battery_init(void)
+{
+ return platform_driver_register(&ds2781_battery_driver);
+}
+
+static void __exit ds2781_battery_exit(void)
+{
+ platform_driver_unregister(&ds2781_battery_driver);
+}
+
+module_init(ds2781_battery_init);
+module_exit(ds2781_battery_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2781 Stand-Alone Fuel Gauage IC driver");
+MODULE_ALIAS("platform:ds2781-battery");
+
struct device *dev;
/* We don't want ccwgroup devices to live longer than their driver. */
- get_driver(&cdriver->driver);
while ((dev = driver_find_device(&cdriver->driver, NULL, NULL,
__ccwgroup_match_all))) {
struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
mutex_unlock(&gdev->reg_mutex);
put_device(dev);
}
- put_driver(&cdriver->driver);
driver_unregister(&cdriver->driver);
}
EXPORT_SYMBOL(ccwgroup_driver_unregister);
const char *bus_id)
{
struct device *dev;
- struct device_driver *drv;
- drv = get_driver(&cdrv->driver);
- if (!drv)
- return NULL;
-
- dev = driver_find_device(drv, NULL, (void *)bus_id,
+ dev = driver_find_device(&cdrv->driver, NULL, (void *)bus_id,
__ccwdev_check_busid);
- put_driver(drv);
return dev ? to_ccwdev(dev) : NULL;
}
rc = dev_set_name(smsg_app_dev, KMSG_COMPONENT);
if (rc) {
kfree(smsg_app_dev);
- goto fail_put_driver;
+ goto fail;
}
smsg_app_dev->bus = &iucv_bus;
smsg_app_dev->parent = iucv_root;
rc = device_register(smsg_app_dev);
if (rc) {
put_device(smsg_app_dev);
- goto fail_put_driver;
+ goto fail;
}
/* convert sender to uppercase characters */
rc = smsg_register_callback(SMSG_PREFIX, smsg_app_callback);
if (rc) {
device_unregister(smsg_app_dev);
- goto fail_put_driver;
+ goto fail;
}
rc = 0;
-fail_put_driver:
- put_driver(smsgiucv_drv);
+fail:
return rc;
}
module_init(smsgiucv_app_init);
put_device(dev->dev);
}
-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
-{
- if (drv)
- get_driver(&drv->drv);
- return drv;
-}
-
-static inline void ssb_driver_put(struct ssb_driver *drv)
-{
- if (drv)
- put_driver(&drv->drv);
-}
-
static int ssb_device_resume(struct device *dev)
{
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
ssb_device_put(sdev);
continue;
}
- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
- ssb_device_put(sdev);
+ sdrv = drv_to_ssb_drv(sdev->dev->driver);
+ if (SSB_WARN_ON(!sdrv->remove))
continue;
- }
sdrv->remove(sdev);
ctx->device_frozen[i] = 1;
}
dev_name(sdev->dev));
result = err;
}
- ssb_driver_put(sdrv);
ssb_device_put(sdev);
}
list_add_tail(&dynid->node, &dynids->list);
spin_unlock(&dynids->lock);
- if (get_driver(driver)) {
- retval = driver_attach(driver);
- put_driver(driver);
- }
+ retval = driver_attach(driver);
if (retval)
return retval;
}
static DRIVER_ATTR(remove_id, S_IWUSR, NULL, store_remove_id);
-static int usb_create_newid_file(struct usb_driver *usb_drv)
+static int usb_create_newid_files(struct usb_driver *usb_drv)
{
int error = 0;
if (usb_drv->no_dynamic_id)
goto exit;
- if (usb_drv->probe != NULL)
+ if (usb_drv->probe != NULL) {
error = driver_create_file(&usb_drv->drvwrap.driver,
&driver_attr_new_id);
+ if (error == 0) {
+ error = driver_create_file(&usb_drv->drvwrap.driver,
+ &driver_attr_remove_id);
+ if (error)
+ driver_remove_file(&usb_drv->drvwrap.driver,
+ &driver_attr_new_id);
+ }
+ }
exit:
return error;
}
-static void usb_remove_newid_file(struct usb_driver *usb_drv)
+static void usb_remove_newid_files(struct usb_driver *usb_drv)
{
if (usb_drv->no_dynamic_id)
return;
- if (usb_drv->probe != NULL)
+ if (usb_drv->probe != NULL) {
driver_remove_file(&usb_drv->drvwrap.driver,
- &driver_attr_new_id);
-}
-
-static int
-usb_create_removeid_file(struct usb_driver *drv)
-{
- int error = 0;
- if (drv->probe != NULL)
- error = driver_create_file(&drv->drvwrap.driver,
&driver_attr_remove_id);
- return error;
-}
-
-static void usb_remove_removeid_file(struct usb_driver *drv)
-{
- driver_remove_file(&drv->drvwrap.driver, &driver_attr_remove_id);
+ driver_remove_file(&usb_drv->drvwrap.driver,
+ &driver_attr_new_id);
+ }
}
static void usb_free_dynids(struct usb_driver *usb_drv)
spin_unlock(&usb_drv->dynids.lock);
}
#else
-static inline int usb_create_newid_file(struct usb_driver *usb_drv)
+static inline int usb_create_newid_files(struct usb_driver *usb_drv)
{
return 0;
}
-static void usb_remove_newid_file(struct usb_driver *usb_drv)
-{
-}
-
-static int
-usb_create_removeid_file(struct usb_driver *drv)
-{
- return 0;
-}
-
-static void usb_remove_removeid_file(struct usb_driver *drv)
+static void usb_remove_newid_files(struct usb_driver *usb_drv)
{
}
usbfs_update_special();
- retval = usb_create_newid_file(new_driver);
+ retval = usb_create_newid_files(new_driver);
if (retval)
goto out_newid;
- retval = usb_create_removeid_file(new_driver);
- if (retval)
- goto out_removeid;
-
pr_info("%s: registered new interface driver %s\n",
usbcore_name, new_driver->name);
out:
return retval;
-out_removeid:
- usb_remove_newid_file(new_driver);
out_newid:
driver_unregister(&new_driver->drvwrap.driver);
pr_info("%s: deregistering interface driver %s\n",
usbcore_name, driver->name);
- usb_remove_removeid_file(driver);
- usb_remove_newid_file(driver);
- usb_free_dynids(driver);
+ usb_remove_newid_files(driver);
driver_unregister(&driver->drvwrap.driver);
+ usb_free_dynids(driver);
usbfs_update_special();
}
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
-static int __devinit dwc3_pci_init(void)
-{
- return pci_register_driver(&dwc3_pci_driver);
-}
-module_init(dwc3_pci_init);
-
-static void __exit dwc3_pci_exit(void)
-{
- pci_unregister_driver(&dwc3_pci_driver);
-}
-module_exit(dwc3_pci_exit);
+module_pci_driver(dwc3_pci_driver);
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/w1-gpio.h>
+#include <linux/gpio.h>
#include "../w1.h"
#include "../w1_int.h"
-#include <asm/gpio.h>
-
static void w1_gpio_write_bit_dir(void *data, u8 bit)
{
struct w1_gpio_platform_data *pdata = data;
If you are unsure, say N.
+config W1_SLAVE_DS2781
+ tristate "Dallas 2781 battery monitor chip"
+ depends on W1
+ help
+ If you enable this you will have the DS2781 battery monitor
+ chip support.
+
+ The battery monitor chip is used in many batteries/devices
+ as the one who is responsible for charging/discharging/monitoring
+ Li+ batteries.
+
+ If you are unsure, say N.
+
config W1_SLAVE_BQ27000
tristate "BQ27000 slave support"
depends on W1
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
+obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
+#include <linux/power/bq27x00_battery.h>
#include "../w1.h"
#include "../w1_int.h"
static int F_ID;
-void w1_bq27000_write(struct device *dev, u8 buf, u8 reg)
-{
- struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
-
- if (!dev) {
- pr_info("Could not obtain slave dev ptr\n");
- return;
- }
-
- w1_write_8(sl->master, HDQ_CMD_WRITE | reg);
- w1_write_8(sl->master, buf);
-}
-EXPORT_SYMBOL(w1_bq27000_write);
-
-int w1_bq27000_read(struct device *dev, u8 reg)
+static int w1_bq27000_read(struct device *dev, unsigned int reg)
{
u8 val;
- struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
-
- if (!dev)
- return 0;
+ struct w1_slave *sl = container_of(dev->parent, struct w1_slave, dev);
+ mutex_lock(&sl->master->mutex);
w1_write_8(sl->master, HDQ_CMD_READ | reg);
val = w1_read_8(sl->master);
+ mutex_unlock(&sl->master->mutex);
return val;
}
-EXPORT_SYMBOL(w1_bq27000_read);
+
+static struct bq27000_platform_data bq27000_battery_info = {
+ .read = w1_bq27000_read,
+ .name = "bq27000-battery",
+};
static int w1_bq27000_add_slave(struct w1_slave *sl)
{
int ret;
- int id = 1;
struct platform_device *pdev;
- pdev = platform_device_alloc("bq27000-battery", id);
+ pdev = platform_device_alloc("bq27000-battery", -1);
if (!pdev) {
ret = -ENOMEM;
return ret;
}
+ ret = platform_device_add_data(pdev,
+ &bq27000_battery_info,
+ sizeof(bq27000_battery_info));
pdev->dev.parent = &sl->dev;
ret = platform_device_add(pdev);
--- /dev/null
+/*
+ * 1-Wire implementation for the ds2781 chip
+ *
+ * Author: Renata Sayakhova <renata@oktetlabs.ru>
+ *
+ * Based on w1-ds2780 driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/idr.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+#include "w1_ds2781.h"
+
+static int w1_ds2781_do_io(struct device *dev, char *buf, int addr,
+ size_t count, int io)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (addr > DS2781_DATA_SIZE || addr < 0)
+ return 0;
+
+ count = min_t(int, count, DS2781_DATA_SIZE - addr);
+
+ if (w1_reset_select_slave(sl) == 0) {
+ if (io) {
+ w1_write_8(sl->master, W1_DS2781_WRITE_DATA);
+ w1_write_8(sl->master, addr);
+ w1_write_block(sl->master, buf, count);
+ } else {
+ w1_write_8(sl->master, W1_DS2781_READ_DATA);
+ w1_write_8(sl->master, addr);
+ count = w1_read_block(sl->master, buf, count);
+ }
+ }
+
+ return count;
+}
+
+int w1_ds2781_io(struct device *dev, char *buf, int addr, size_t count,
+ int io)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret;
+
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&sl->master->mutex);
+
+ ret = w1_ds2781_do_io(dev, buf, addr, count, io);
+
+ mutex_unlock(&sl->master->mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(w1_ds2781_io);
+
+int w1_ds2781_io_nolock(struct device *dev, char *buf, int addr, size_t count,
+ int io)
+{
+ int ret;
+
+ if (!dev)
+ return -ENODEV;
+
+ ret = w1_ds2781_do_io(dev, buf, addr, count, io);
+
+ return ret;
+}
+EXPORT_SYMBOL(w1_ds2781_io_nolock);
+
+int w1_ds2781_eeprom_cmd(struct device *dev, int addr, int cmd)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->mutex);
+
+ if (w1_reset_select_slave(sl) == 0) {
+ w1_write_8(sl->master, cmd);
+ w1_write_8(sl->master, addr);
+ }
+
+ mutex_unlock(&sl->master->mutex);
+ return 0;
+}
+EXPORT_SYMBOL(w1_ds2781_eeprom_cmd);
+
+static ssize_t w1_ds2781_read_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ return w1_ds2781_io(dev, buf, off, count, 0);
+}
+
+static struct bin_attribute w1_ds2781_bin_attr = {
+ .attr = {
+ .name = "w1_slave",
+ .mode = S_IRUGO,
+ },
+ .size = DS2781_DATA_SIZE,
+ .read = w1_ds2781_read_bin,
+};
+
+static DEFINE_IDA(bat_ida);
+
+static int w1_ds2781_add_slave(struct w1_slave *sl)
+{
+ int ret;
+ int id;
+ struct platform_device *pdev;
+
+ id = ida_simple_get(&bat_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ ret = id;
+ goto noid;
+ }
+
+ pdev = platform_device_alloc("ds2781-battery", id);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto pdev_alloc_failed;
+ }
+ pdev->dev.parent = &sl->dev;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto pdev_add_failed;
+
+ ret = sysfs_create_bin_file(&sl->dev.kobj, &w1_ds2781_bin_attr);
+ if (ret)
+ goto bin_attr_failed;
+
+ dev_set_drvdata(&sl->dev, pdev);
+
+ return 0;
+
+bin_attr_failed:
+pdev_add_failed:
+ platform_device_unregister(pdev);
+pdev_alloc_failed:
+ ida_simple_remove(&bat_ida, id);
+noid:
+ return ret;
+}
+
+static void w1_ds2781_remove_slave(struct w1_slave *sl)
+{
+ struct platform_device *pdev = dev_get_drvdata(&sl->dev);
+ int id = pdev->id;
+
+ platform_device_unregister(pdev);
+ ida_simple_remove(&bat_ida, id);
+ sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2781_bin_attr);
+}
+
+static struct w1_family_ops w1_ds2781_fops = {
+ .add_slave = w1_ds2781_add_slave,
+ .remove_slave = w1_ds2781_remove_slave,
+};
+
+static struct w1_family w1_ds2781_family = {
+ .fid = W1_FAMILY_DS2781,
+ .fops = &w1_ds2781_fops,
+};
+
+static int __init w1_ds2781_init(void)
+{
+ ida_init(&bat_ida);
+ return w1_register_family(&w1_ds2781_family);
+}
+
+static void __exit w1_ds2781_exit(void)
+{
+ w1_unregister_family(&w1_ds2781_family);
+ ida_destroy(&bat_ida);
+}
+
+module_init(w1_ds2781_init);
+module_exit(w1_ds2781_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>");
+MODULE_DESCRIPTION("1-wire Driver for Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC");
--- /dev/null
+/*
+ * 1-Wire implementation for the ds2780 chip
+ *
+ * Author: Renata Sayakhova <renata@oktetlabs.ru>
+ *
+ * Based on w1-ds2760 driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _W1_DS2781_H
+#define _W1_DS2781_H
+
+/* Function commands */
+#define W1_DS2781_READ_DATA 0x69
+#define W1_DS2781_WRITE_DATA 0x6C
+#define W1_DS2781_COPY_DATA 0x48
+#define W1_DS2781_RECALL_DATA 0xB8
+#define W1_DS2781_LOCK 0x6A
+
+/* Register map */
+/* Register 0x00 Reserved */
+#define DS2781_STATUS 0x01
+#define DS2781_RAAC_MSB 0x02
+#define DS2781_RAAC_LSB 0x03
+#define DS2781_RSAC_MSB 0x04
+#define DS2781_RSAC_LSB 0x05
+#define DS2781_RARC 0x06
+#define DS2781_RSRC 0x07
+#define DS2781_IAVG_MSB 0x08
+#define DS2781_IAVG_LSB 0x09
+#define DS2781_TEMP_MSB 0x0A
+#define DS2781_TEMP_LSB 0x0B
+#define DS2781_VOLT_MSB 0x0C
+#define DS2781_VOLT_LSB 0x0D
+#define DS2781_CURRENT_MSB 0x0E
+#define DS2781_CURRENT_LSB 0x0F
+#define DS2781_ACR_MSB 0x10
+#define DS2781_ACR_LSB 0x11
+#define DS2781_ACRL_MSB 0x12
+#define DS2781_ACRL_LSB 0x13
+#define DS2781_AS 0x14
+#define DS2781_SFR 0x15
+#define DS2781_FULL_MSB 0x16
+#define DS2781_FULL_LSB 0x17
+#define DS2781_AE_MSB 0x18
+#define DS2781_AE_LSB 0x19
+#define DS2781_SE_MSB 0x1A
+#define DS2781_SE_LSB 0x1B
+/* Register 0x1C - 0x1E Reserved */
+#define DS2781_EEPROM 0x1F
+#define DS2781_EEPROM_BLOCK0_START 0x20
+/* Register 0x20 - 0x2F User EEPROM */
+#define DS2781_EEPROM_BLOCK0_END 0x2F
+/* Register 0x30 - 0x5F Reserved */
+#define DS2781_EEPROM_BLOCK1_START 0x60
+#define DS2781_CONTROL 0x60
+#define DS2781_AB 0x61
+#define DS2781_AC_MSB 0x62
+#define DS2781_AC_LSB 0x63
+#define DS2781_VCHG 0x64
+#define DS2781_IMIN 0x65
+#define DS2781_VAE 0x66
+#define DS2781_IAE 0x67
+#define DS2781_AE_40 0x68
+#define DS2781_RSNSP 0x69
+#define DS2781_FULL_40_MSB 0x6A
+#define DS2781_FULL_40_LSB 0x6B
+#define DS2781_FULL_4_SLOPE 0x6C
+#define DS2781_FULL_3_SLOPE 0x6D
+#define DS2781_FULL_2_SLOPE 0x6E
+#define DS2781_FULL_1_SLOPE 0x6F
+#define DS2781_AE_4_SLOPE 0x70
+#define DS2781_AE_3_SLOPE 0x71
+#define DS2781_AE_2_SLOPE 0x72
+#define DS2781_AE_1_SLOPE 0x73
+#define DS2781_SE_4_SLOPE 0x74
+#define DS2781_SE_3_SLOPE 0x75
+#define DS2781_SE_2_SLOPE 0x76
+#define DS2781_SE_1_SLOPE 0x77
+#define DS2781_RSGAIN_MSB 0x78
+#define DS2781_RSGAIN_LSB 0x79
+#define DS2781_RSTC 0x7A
+#define DS2781_COB 0x7B
+#define DS2781_TBP34 0x7C
+#define DS2781_TBP23 0x7D
+#define DS2781_TBP12 0x7E
+#define DS2781_EEPROM_BLOCK1_END 0x7F
+/* Register 0x7D - 0xFF Reserved */
+
+#define DS2781_FSGAIN_MSB 0xB0
+#define DS2781_FSGAIN_LSB 0xB1
+
+/* Number of valid register addresses */
+#define DS2781_DATA_SIZE 0xB2
+
+/* Status register bits */
+#define DS2781_STATUS_CHGTF (1 << 7)
+#define DS2781_STATUS_AEF (1 << 6)
+#define DS2781_STATUS_SEF (1 << 5)
+#define DS2781_STATUS_LEARNF (1 << 4)
+/* Bit 3 Reserved */
+#define DS2781_STATUS_UVF (1 << 2)
+#define DS2781_STATUS_PORF (1 << 1)
+/* Bit 0 Reserved */
+
+/* Control register bits */
+/* Bit 7 Reserved */
+#define DS2781_CONTROL_NBEN (1 << 7)
+#define DS2781_CONTROL_UVEN (1 << 6)
+#define DS2781_CONTROL_PMOD (1 << 5)
+#define DS2781_CONTROL_RNAOP (1 << 4)
+#define DS1781_CONTROL_UVTH (1 << 3)
+/* Bit 0 - 2 Reserved */
+
+/* Special feature register bits */
+/* Bit 1 - 7 Reserved */
+#define DS2781_SFR_PIOSC (1 << 0)
+
+/* EEPROM register bits */
+#define DS2781_EEPROM_EEC (1 << 7)
+#define DS2781_EEPROM_LOCK (1 << 6)
+/* Bit 2 - 6 Reserved */
+#define DS2781_EEPROM_BL1 (1 << 1)
+#define DS2781_EEPROM_BL0 (1 << 0)
+
+extern int w1_ds2781_io(struct device *dev, char *buf, int addr, size_t count,
+ int io);
+extern int w1_ds2781_io_nolock(struct device *dev, char *buf, int addr,
+ size_t count, int io);
+extern int w1_ds2781_eeprom_cmd(struct device *dev, int addr, int cmd);
+
+#endif /* !_W1_DS2781_H */
#define W1_EEPROM_DS2431 0x2D
#define W1_FAMILY_DS2760 0x30
#define W1_FAMILY_DS2780 0x32
+#define W1_FAMILY_DS2781 0x3D
#define W1_THERM_DS28EA00 0x42
#define MAXNAMELEN 32
#include <linux/debugfs.h>
#include <linux/fsnotify.h>
#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/parser.h>
#include <linux/magic.h>
#include <linux/slab.h>
+#define DEBUGFS_DEFAULT_MODE 0755
+
static struct vfsmount *debugfs_mount;
static int debugfs_mount_count;
static bool debugfs_registered;
return dentry->d_inode && !d_unhashed(dentry);
}
+struct debugfs_mount_opts {
+ uid_t uid;
+ gid_t gid;
+ umode_t mode;
+};
+
+enum {
+ Opt_uid,
+ Opt_gid,
+ Opt_mode,
+ Opt_err
+};
+
+static const match_table_t tokens = {
+ {Opt_uid, "uid=%u"},
+ {Opt_gid, "gid=%u"},
+ {Opt_mode, "mode=%o"},
+ {Opt_err, NULL}
+};
+
+struct debugfs_fs_info {
+ struct debugfs_mount_opts mount_opts;
+};
+
+static int debugfs_parse_options(char *data, struct debugfs_mount_opts *opts)
+{
+ substring_t args[MAX_OPT_ARGS];
+ int option;
+ int token;
+ char *p;
+
+ opts->mode = DEBUGFS_DEFAULT_MODE;
+
+ while ((p = strsep(&data, ",")) != NULL) {
+ if (!*p)
+ continue;
+
+ token = match_token(p, tokens, args);
+ switch (token) {
+ case Opt_uid:
+ if (match_int(&args[0], &option))
+ return -EINVAL;
+ opts->uid = option;
+ break;
+ case Opt_gid:
+ if (match_octal(&args[0], &option))
+ return -EINVAL;
+ opts->gid = option;
+ break;
+ case Opt_mode:
+ if (match_octal(&args[0], &option))
+ return -EINVAL;
+ opts->mode = option & S_IALLUGO;
+ break;
+ /*
+ * We might like to report bad mount options here;
+ * but traditionally debugfs has ignored all mount options
+ */
+ }
+ }
+
+ return 0;
+}
+
+static int debugfs_apply_options(struct super_block *sb)
+{
+ struct debugfs_fs_info *fsi = sb->s_fs_info;
+ struct inode *inode = sb->s_root->d_inode;
+ struct debugfs_mount_opts *opts = &fsi->mount_opts;
+
+ inode->i_mode &= ~S_IALLUGO;
+ inode->i_mode |= opts->mode;
+
+ inode->i_uid = opts->uid;
+ inode->i_gid = opts->gid;
+
+ return 0;
+}
+
+static int debugfs_remount(struct super_block *sb, int *flags, char *data)
+{
+ int err;
+ struct debugfs_fs_info *fsi = sb->s_fs_info;
+
+ err = debugfs_parse_options(data, &fsi->mount_opts);
+ if (err)
+ goto fail;
+
+ debugfs_apply_options(sb);
+
+fail:
+ return err;
+}
+
+static int debugfs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct debugfs_fs_info *fsi = root->d_sb->s_fs_info;
+ struct debugfs_mount_opts *opts = &fsi->mount_opts;
+
+ if (opts->uid != 0)
+ seq_printf(m, ",uid=%u", opts->uid);
+ if (opts->gid != 0)
+ seq_printf(m, ",gid=%u", opts->gid);
+ if (opts->mode != DEBUGFS_DEFAULT_MODE)
+ seq_printf(m, ",mode=%o", opts->mode);
+
+ return 0;
+}
+
+static const struct super_operations debugfs_super_operations = {
+ .statfs = simple_statfs,
+ .remount_fs = debugfs_remount,
+ .show_options = debugfs_show_options,
+};
+
static int debug_fill_super(struct super_block *sb, void *data, int silent)
{
static struct tree_descr debug_files[] = {{""}};
+ struct debugfs_fs_info *fsi;
+ int err;
+
+ save_mount_options(sb, data);
+
+ fsi = kzalloc(sizeof(struct debugfs_fs_info), GFP_KERNEL);
+ sb->s_fs_info = fsi;
+ if (!fsi) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ err = debugfs_parse_options(data, &fsi->mount_opts);
+ if (err)
+ goto fail;
+
+ err = simple_fill_super(sb, DEBUGFS_MAGIC, debug_files);
+ if (err)
+ goto fail;
+
+ sb->s_op = &debugfs_super_operations;
+
+ debugfs_apply_options(sb);
+
+ return 0;
- return simple_fill_super(sb, DEBUGFS_MAGIC, debug_files);
+fail:
+ kfree(fsi);
+ sb->s_fs_info = NULL;
+ return err;
}
static struct dentry *debug_mount(struct file_system_type *fs_type,
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/security.h>
+#include <linux/hash.h>
#include "sysfs.h"
DEFINE_MUTEX(sysfs_mutex);
DEFINE_SPINLOCK(sysfs_assoc_lock);
+#define to_sysfs_dirent(X) rb_entry((X), struct sysfs_dirent, s_rb);
+
static DEFINE_SPINLOCK(sysfs_ino_lock);
static DEFINE_IDA(sysfs_ino_ida);
/**
- * sysfs_link_sibling - link sysfs_dirent into sibling list
+ * sysfs_name_hash
+ * @ns: Namespace tag to hash
+ * @name: Null terminated string to hash
+ *
+ * Returns 31 bit hash of ns + name (so it fits in an off_t )
+ */
+static unsigned int sysfs_name_hash(const void *ns, const char *name)
+{
+ unsigned long hash = init_name_hash();
+ unsigned int len = strlen(name);
+ while (len--)
+ hash = partial_name_hash(*name++, hash);
+ hash = ( end_name_hash(hash) ^ hash_ptr( (void *)ns, 31 ) );
+ hash &= 0x7fffffffU;
+ /* Reserve hash numbers 0, 1 and INT_MAX for magic directory entries */
+ if (hash < 1)
+ hash += 2;
+ if (hash >= INT_MAX)
+ hash = INT_MAX - 1;
+ return hash;
+}
+
+static int sysfs_name_compare(unsigned int hash, const void *ns,
+ const char *name, const struct sysfs_dirent *sd)
+{
+ if (hash != sd->s_hash)
+ return hash - sd->s_hash;
+ if (ns != sd->s_ns)
+ return ns - sd->s_ns;
+ return strcmp(name, sd->s_name);
+}
+
+static int sysfs_sd_compare(const struct sysfs_dirent *left,
+ const struct sysfs_dirent *right)
+{
+ return sysfs_name_compare(left->s_hash, left->s_ns, left->s_name,
+ right);
+}
+
+/**
+ * sysfs_link_subling - link sysfs_dirent into sibling rbtree
* @sd: sysfs_dirent of interest
*
- * Link @sd into its sibling list which starts from
+ * Link @sd into its sibling rbtree which starts from
* sd->s_parent->s_dir.children.
*
* Locking:
* mutex_lock(sysfs_mutex)
+ *
+ * RETURNS:
+ * 0 on susccess -EEXIST on failure.
*/
-static void sysfs_link_sibling(struct sysfs_dirent *sd)
+static int sysfs_link_sibling(struct sysfs_dirent *sd)
{
- struct sysfs_dirent *parent_sd = sd->s_parent;
-
- struct rb_node **p;
- struct rb_node *parent;
+ struct rb_node **node = &sd->s_parent->s_dir.children.rb_node;
+ struct rb_node *parent = NULL;
if (sysfs_type(sd) == SYSFS_DIR)
- parent_sd->s_dir.subdirs++;
-
- p = &parent_sd->s_dir.inode_tree.rb_node;
- parent = NULL;
- while (*p) {
- parent = *p;
-#define node rb_entry(parent, struct sysfs_dirent, inode_node)
- if (sd->s_ino < node->s_ino) {
- p = &node->inode_node.rb_left;
- } else if (sd->s_ino > node->s_ino) {
- p = &node->inode_node.rb_right;
- } else {
- printk(KERN_CRIT "sysfs: inserting duplicate inode '%lx'\n",
- (unsigned long) sd->s_ino);
- BUG();
- }
-#undef node
- }
- rb_link_node(&sd->inode_node, parent, p);
- rb_insert_color(&sd->inode_node, &parent_sd->s_dir.inode_tree);
-
- p = &parent_sd->s_dir.name_tree.rb_node;
- parent = NULL;
- while (*p) {
- int c;
- parent = *p;
-#define node rb_entry(parent, struct sysfs_dirent, name_node)
- c = strcmp(sd->s_name, node->s_name);
- if (c < 0) {
- p = &node->name_node.rb_left;
- } else {
- p = &node->name_node.rb_right;
- }
-#undef node
+ sd->s_parent->s_dir.subdirs++;
+
+ while (*node) {
+ struct sysfs_dirent *pos;
+ int result;
+
+ pos = to_sysfs_dirent(*node);
+ parent = *node;
+ result = sysfs_sd_compare(sd, pos);
+ if (result < 0)
+ node = &pos->s_rb.rb_left;
+ else if (result > 0)
+ node = &pos->s_rb.rb_right;
+ else
+ return -EEXIST;
}
- rb_link_node(&sd->name_node, parent, p);
- rb_insert_color(&sd->name_node, &parent_sd->s_dir.name_tree);
+ /* add new node and rebalance the tree */
+ rb_link_node(&sd->s_rb, parent, node);
+ rb_insert_color(&sd->s_rb, &sd->s_parent->s_dir.children);
+ return 0;
}
/**
- * sysfs_unlink_sibling - unlink sysfs_dirent from sibling list
+ * sysfs_unlink_sibling - unlink sysfs_dirent from sibling rbtree
* @sd: sysfs_dirent of interest
*
- * Unlink @sd from its sibling list which starts from
+ * Unlink @sd from its sibling rbtree which starts from
* sd->s_parent->s_dir.children.
*
* Locking:
if (sysfs_type(sd) == SYSFS_DIR)
sd->s_parent->s_dir.subdirs--;
- rb_erase(&sd->inode_node, &sd->s_parent->s_dir.inode_tree);
- rb_erase(&sd->name_node, &sd->s_parent->s_dir.name_tree);
+ rb_erase(&sd->s_rb, &sd->s_parent->s_dir.children);
}
/**
rwsem_release(&sd->dep_map, 1, _RET_IP_);
}
-static int sysfs_alloc_ino(ino_t *pino)
+static int sysfs_alloc_ino(unsigned int *pino)
{
int ino, rc;
return rc;
}
-static void sysfs_free_ino(ino_t ino)
+static void sysfs_free_ino(unsigned int ino)
{
spin_lock(&sysfs_ino_lock);
ida_remove(&sysfs_ino_ida, ino);
int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
{
struct sysfs_inode_attrs *ps_iattr;
+ int ret;
if (!!sysfs_ns_type(acxt->parent_sd) != !!sd->s_ns) {
WARN(1, KERN_WARNING "sysfs: ns %s in '%s' for '%s'\n",
return -EINVAL;
}
- if (sysfs_find_dirent(acxt->parent_sd, sd->s_ns, sd->s_name))
- return -EEXIST;
-
+ sd->s_hash = sysfs_name_hash(sd->s_ns, sd->s_name);
sd->s_parent = sysfs_get(acxt->parent_sd);
- sysfs_link_sibling(sd);
+ ret = sysfs_link_sibling(sd);
+ if (ret)
+ return ret;
/* Update timestamps on the parent */
ps_iattr = acxt->parent_sd->s_iattr;
const void *ns,
const unsigned char *name)
{
- struct rb_node *p = parent_sd->s_dir.name_tree.rb_node;
- struct sysfs_dirent *found = NULL;
+ struct rb_node *node = parent_sd->s_dir.children.rb_node;
+ unsigned int hash;
if (!!sysfs_ns_type(parent_sd) != !!ns) {
WARN(1, KERN_WARNING "sysfs: ns %s in '%s' for '%s'\n",
return NULL;
}
- while (p) {
- int c;
-#define node rb_entry(p, struct sysfs_dirent, name_node)
- c = strcmp(name, node->s_name);
- if (c < 0) {
- p = node->name_node.rb_left;
- } else if (c > 0) {
- p = node->name_node.rb_right;
- } else {
- found = node;
- p = node->name_node.rb_left;
- }
-#undef node
- }
-
- if (found) {
- while (found->s_ns != ns) {
- p = rb_next(&found->name_node);
- if (!p)
- return NULL;
- found = rb_entry(p, struct sysfs_dirent, name_node);
- if (strcmp(name, found->s_name))
- return NULL;
- }
+ hash = sysfs_name_hash(ns, name);
+ while (node) {
+ struct sysfs_dirent *sd;
+ int result;
+
+ sd = to_sysfs_dirent(node);
+ result = sysfs_name_compare(hash, ns, name, sd);
+ if (result < 0)
+ node = node->rb_left;
+ else if (result > 0)
+ node = node->rb_right;
+ else
+ return sd;
}
-
- return found;
+ return NULL;
}
/**
pr_debug("sysfs %s: removing dir\n", dir_sd->s_name);
sysfs_addrm_start(&acxt, dir_sd);
- pos = rb_first(&dir_sd->s_dir.inode_tree);
+ pos = rb_first(&dir_sd->s_dir.children);
while (pos) {
- struct sysfs_dirent *sd = rb_entry(pos, struct sysfs_dirent, inode_node);
+ struct sysfs_dirent *sd = to_sysfs_dirent(pos);
pos = rb_next(pos);
if (sysfs_type(sd) != SYSFS_DIR)
sysfs_remove_one(&acxt, sd);
dup_name = sd->s_name;
sd->s_name = new_name;
+ sd->s_hash = sysfs_name_hash(sd->s_ns, sd->s_name);
}
/* Move to the appropriate place in the appropriate directories rbtree. */
}
static struct sysfs_dirent *sysfs_dir_pos(const void *ns,
- struct sysfs_dirent *parent_sd, ino_t ino, struct sysfs_dirent *pos)
+ struct sysfs_dirent *parent_sd, loff_t hash, struct sysfs_dirent *pos)
{
if (pos) {
int valid = !(pos->s_flags & SYSFS_FLAG_REMOVED) &&
pos->s_parent == parent_sd &&
- ino == pos->s_ino;
+ hash == pos->s_hash;
sysfs_put(pos);
if (!valid)
pos = NULL;
}
- if (!pos && (ino > 1) && (ino < INT_MAX)) {
- struct rb_node *p = parent_sd->s_dir.inode_tree.rb_node;
- while (p) {
-#define node rb_entry(p, struct sysfs_dirent, inode_node)
- if (ino < node->s_ino) {
- pos = node;
- p = node->inode_node.rb_left;
- } else if (ino > node->s_ino) {
- p = node->inode_node.rb_right;
- } else {
- pos = node;
+ if (!pos && (hash > 1) && (hash < INT_MAX)) {
+ struct rb_node *node = parent_sd->s_dir.children.rb_node;
+ while (node) {
+ pos = to_sysfs_dirent(node);
+
+ if (hash < pos->s_hash)
+ node = node->rb_left;
+ else if (hash > pos->s_hash)
+ node = node->rb_right;
+ else
break;
- }
-#undef node
}
}
+ /* Skip over entries in the wrong namespace */
while (pos && pos->s_ns != ns) {
- struct rb_node *p = rb_next(&pos->inode_node);
- if (!p)
+ struct rb_node *node = rb_next(&pos->s_rb);
+ if (!node)
pos = NULL;
else
- pos = rb_entry(p, struct sysfs_dirent, inode_node);
+ pos = to_sysfs_dirent(node);
}
return pos;
}
{
pos = sysfs_dir_pos(ns, parent_sd, ino, pos);
if (pos) do {
- struct rb_node *p = rb_next(&pos->inode_node);
- if (!p)
+ struct rb_node *node = rb_next(&pos->s_rb);
+ if (!node)
pos = NULL;
else
- pos = rb_entry(p, struct sysfs_dirent, inode_node);
+ pos = to_sysfs_dirent(node);
} while (pos && pos->s_ns != ns);
return pos;
}
len = strlen(name);
ino = pos->s_ino;
type = dt_type(pos);
- filp->f_pos = ino;
+ filp->f_pos = pos->s_hash;
filp->private_data = sysfs_get(pos);
mutex_unlock(&sysfs_mutex);
void *old_secdata;
size_t old_secdata_len;
- iattrs = sd->s_iattr;
- if (!iattrs)
- iattrs = sysfs_init_inode_attrs(sd);
- if (!iattrs)
- return -ENOMEM;
+ if (!sd->s_iattr) {
+ sd->s_iattr = sysfs_init_inode_attrs(sd);
+ if (!sd->s_iattr)
+ return -ENOMEM;
+ }
+ iattrs = sd->s_iattr;
old_secdata = iattrs->ia_secdata;
old_secdata_len = iattrs->ia_secdata_len;
.s_name = "",
.s_count = ATOMIC_INIT(1),
.s_flags = SYSFS_DIR | (KOBJ_NS_TYPE_NONE << SYSFS_NS_TYPE_SHIFT),
- .s_mode = S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO,
+ .s_mode = S_IFDIR | S_IRUGO | S_IXUGO,
.s_ino = 1,
};
struct kobject *kobj;
unsigned long subdirs;
-
- struct rb_root inode_tree;
- struct rb_root name_tree;
+ /* children rbtree starts here and goes through sd->s_rb */
+ struct rb_root children;
};
struct sysfs_elem_symlink {
struct sysfs_dirent *s_parent;
const char *s_name;
- struct rb_node inode_node;
- struct rb_node name_node;
+ struct rb_node s_rb;
union {
struct completion *completion;
} u;
const void *s_ns; /* namespace tag */
+ unsigned int s_hash; /* ns + name hash */
union {
struct sysfs_elem_dir s_dir;
struct sysfs_elem_symlink s_symlink;
struct sysfs_elem_bin_attr s_bin_attr;
};
- unsigned int s_flags;
+ unsigned short s_flags;
umode_t s_mode;
- ino_t s_ino;
+ unsigned int s_ino;
struct sysfs_inode_attrs *s_iattr;
};
#define SYSFS_ACTIVE_REF (SYSFS_KOBJ_ATTR | SYSFS_KOBJ_BIN_ATTR)
/* identify any namespace tag on sysfs_dirents */
-#define SYSFS_NS_TYPE_MASK 0xff00
+#define SYSFS_NS_TYPE_MASK 0xf00
#define SYSFS_NS_TYPE_SHIFT 8
#define SYSFS_FLAG_MASK ~(SYSFS_NS_TYPE_MASK|SYSFS_TYPE_MASK)
-#define SYSFS_FLAG_REMOVED 0x020000
+#define SYSFS_FLAG_REMOVED 0x02000
static inline unsigned int sysfs_type(struct sysfs_dirent *sd)
{
} piix4;
};
+extern void acpi_processor_load_module(struct acpi_processor *pr);
extern int acpi_processor_preregister_performance(struct
acpi_processor_performance
__percpu *performance);
#define CN_IDX_DRBD 0x8
#define CN_VAL_DRBD 0x1
#define CN_KVP_IDX 0x9 /* HyperV KVP */
+#define CN_KVP_VAL 0x1 /* queries from the kernel */
#define CN_NETLINK_USERS 10 /* Highest index + 1 */
#endif
struct notifier_block;
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+extern int arch_cpu_uevent(struct device *dev, struct kobj_uevent_env *env);
+extern ssize_t arch_print_cpu_modalias(struct device *dev,
+ struct device_attribute *attr,
+ char *bufptr);
+#endif
+
/*
* CPU notifier priorities.
*/
extern int __must_check driver_register(struct device_driver *drv);
extern void driver_unregister(struct device_driver *drv);
-extern struct device_driver *get_driver(struct device_driver *drv);
-extern void put_driver(struct device_driver *drv);
extern struct device_driver *driver_find(const char *name,
struct bus_type *bus);
extern int driver_probe_done(void);
#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
-#if defined(DEBUG)
-#define dev_dbg(dev, format, arg...) \
- dev_printk(KERN_DEBUG, dev, format, ##arg)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG)
#define dev_dbg(dev, format, ...) \
do { \
dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
} while (0)
+#elif defined(DEBUG)
+#define dev_dbg(dev, format, arg...) \
+ dev_printk(KERN_DEBUG, dev, format, ##arg)
#else
#define dev_dbg(dev, format, arg...) \
({ \
const char *function;
const char *filename;
const char *format;
- unsigned int lineno:24;
+ unsigned int lineno:18;
/*
* The flags field controls the behaviour at the callsite.
* The bits here are changed dynamically when the user
* writes commands to <debugfs>/dynamic_debug/control
*/
-#define _DPRINTK_FLAGS_PRINT (1<<0) /* printk() a message using the format */
+#define _DPRINTK_FLAGS_NONE 0
+#define _DPRINTK_FLAGS_PRINT (1<<0) /* printk() a message using the format */
#define _DPRINTK_FLAGS_INCL_MODNAME (1<<1)
#define _DPRINTK_FLAGS_INCL_FUNCNAME (1<<2)
#define _DPRINTK_FLAGS_INCL_LINENO (1<<3)
#define _DPRINTK_FLAGS_INCL_TID (1<<4)
+#if defined DEBUG
+#define _DPRINTK_FLAGS_DEFAULT _DPRINTK_FLAGS_PRINT
+#else
#define _DPRINTK_FLAGS_DEFAULT 0
+#endif
unsigned int flags:8;
- char enabled;
} __attribute__((aligned(8)));
.format = (fmt), \
.lineno = __LINE__, \
.flags = _DPRINTK_FLAGS_DEFAULT, \
- .enabled = false, \
}
#define dynamic_pr_debug(fmt, ...) \
do { \
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
- if (unlikely(descriptor.enabled)) \
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \
__dynamic_pr_debug(&descriptor, pr_fmt(fmt), \
##__VA_ARGS__); \
} while (0)
#define dynamic_dev_dbg(dev, fmt, ...) \
do { \
- DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
- if (unlikely(descriptor.enabled)) \
+ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \
__dynamic_dev_dbg(&descriptor, dev, fmt, \
##__VA_ARGS__); \
} while (0)
#define dynamic_netdev_dbg(dev, fmt, ...) \
do { \
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
- if (unlikely(descriptor.enabled)) \
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \
__dynamic_netdev_dbg(&descriptor, dev, fmt, \
##__VA_ARGS__); \
} while (0)
#define ERESTARTNOHAND 514 /* restart if no handler.. */
#define ENOIOCTLCMD 515 /* No ioctl command */
#define ERESTART_RESTARTBLOCK 516 /* restart by calling sys_restart_syscall */
+#define EPROBE_DEFER 517 /* Driver requests probe retry */
/* Defined for the NFSv3 protocol */
#define EBADHANDLE 521 /* Illegal NFS file handle */
#ifndef _HYPERV_H
#define _HYPERV_H
+#include <linux/types.h>
+
+/*
+ * An implementation of HyperV key value pair (KVP) functionality for Linux.
+ *
+ *
+ * Copyright (C) 2010, Novell, Inc.
+ * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
+ *
+ */
+
+/*
+ * Maximum value size - used for both key names and value data, and includes
+ * any applicable NULL terminators.
+ *
+ * Note: This limit is somewhat arbitrary, but falls easily within what is
+ * supported for all native guests (back to Win 2000) and what is reasonable
+ * for the IC KVP exchange functionality. Note that Windows Me/98/95 are
+ * limited to 255 character key names.
+ *
+ * MSDN recommends not storing data values larger than 2048 bytes in the
+ * registry.
+ *
+ * Note: This value is used in defining the KVP exchange message - this value
+ * cannot be modified without affecting the message size and compatibility.
+ */
+
+/*
+ * bytes, including any null terminators
+ */
+#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048)
+
+
+/*
+ * Maximum key size - the registry limit for the length of an entry name
+ * is 256 characters, including the null terminator
+ */
+
+#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512)
+
+/*
+ * In Linux, we implement the KVP functionality in two components:
+ * 1) The kernel component which is packaged as part of the hv_utils driver
+ * is responsible for communicating with the host and responsible for
+ * implementing the host/guest protocol. 2) A user level daemon that is
+ * responsible for data gathering.
+ *
+ * Host/Guest Protocol: The host iterates over an index and expects the guest
+ * to assign a key name to the index and also return the value corresponding to
+ * the key. The host will have atmost one KVP transaction outstanding at any
+ * given point in time. The host side iteration stops when the guest returns
+ * an error. Microsoft has specified the following mapping of key names to
+ * host specified index:
+ *
+ * Index Key Name
+ * 0 FullyQualifiedDomainName
+ * 1 IntegrationServicesVersion
+ * 2 NetworkAddressIPv4
+ * 3 NetworkAddressIPv6
+ * 4 OSBuildNumber
+ * 5 OSName
+ * 6 OSMajorVersion
+ * 7 OSMinorVersion
+ * 8 OSVersion
+ * 9 ProcessorArchitecture
+ *
+ * The Windows host expects the Key Name and Key Value to be encoded in utf16.
+ *
+ * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the
+ * data gathering functionality in a user mode daemon. The user level daemon
+ * is also responsible for binding the key name to the index as well. The
+ * kernel and user-level daemon communicate using a connector channel.
+ *
+ * The user mode component first registers with the
+ * the kernel component. Subsequently, the kernel component requests, data
+ * for the specified keys. In response to this message the user mode component
+ * fills in the value corresponding to the specified key. We overload the
+ * sequence field in the cn_msg header to define our KVP message types.
+ *
+ *
+ * The kernel component simply acts as a conduit for communication between the
+ * Windows host and the user-level daemon. The kernel component passes up the
+ * index received from the Host to the user-level daemon. If the index is
+ * valid (supported), the corresponding key as well as its
+ * value (both are strings) is returned. If the index is invalid
+ * (not supported), a NULL key string is returned.
+ */
+
+
+/*
+ * Registry value types.
+ */
+
+#define REG_SZ 1
+
+enum hv_kvp_exchg_op {
+ KVP_OP_GET = 0,
+ KVP_OP_SET,
+ KVP_OP_DELETE,
+ KVP_OP_ENUMERATE,
+ KVP_OP_REGISTER,
+ KVP_OP_COUNT /* Number of operations, must be last. */
+};
+
+enum hv_kvp_exchg_pool {
+ KVP_POOL_EXTERNAL = 0,
+ KVP_POOL_GUEST,
+ KVP_POOL_AUTO,
+ KVP_POOL_AUTO_EXTERNAL,
+ KVP_POOL_AUTO_INTERNAL,
+ KVP_POOL_COUNT /* Number of pools, must be last. */
+};
+
+struct hv_kvp_hdr {
+ __u8 operation;
+ __u8 pool;
+ __u16 pad;
+} __attribute__((packed));
+
+struct hv_kvp_exchg_msg_value {
+ __u32 value_type;
+ __u32 key_size;
+ __u32 value_size;
+ __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+ __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
+} __attribute__((packed));
+
+struct hv_kvp_msg_enumerate {
+ __u32 index;
+ struct hv_kvp_exchg_msg_value data;
+} __attribute__((packed));
+
+struct hv_kvp_msg {
+ struct hv_kvp_hdr kvp_hdr;
+ union {
+ struct hv_kvp_msg_enumerate kvp_enum_data;
+ char kvp_version[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+ } body;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
#include <linux/scatterlist.h>
#include <linux/list.h>
#include <linux/uuid.h>
extern void vmbus_prep_negotiate_resp(struct icmsg_hdr *,
struct icmsg_negotiate *, u8 *);
+int hv_kvp_init(struct hv_util_service *);
+void hv_kvp_deinit(void);
+void hv_kvp_onchannelcallback(void *);
+
+#endif /* __KERNEL__ */
#endif /* _HYPERV_H */
#endif
};
+/*
+ * Match x86 CPUs for CPU specific drivers.
+ * See documentation of "x86_match_cpu" for details.
+ */
+
+struct x86_cpu_id {
+ __u16 vendor;
+ __u16 family;
+ __u16 model;
+ __u16 feature; /* bit index */
+ kernel_ulong_t driver_data;
+};
+
+#define X86_FEATURE_MATCH(x) \
+ { X86_VENDOR_ANY, X86_FAMILY_ANY, X86_MODEL_ANY, x }
+
+#define X86_VENDOR_ANY 0xffff
+#define X86_FAMILY_ANY 0
+#define X86_MODEL_ANY 0
+#define X86_FEATURE_ANY 0 /* Same as FPU, you can't test for that */
+
#endif /* LINUX_MOD_DEVICETABLE_H */
#define MODULE_ALIAS_NETDEV(device) \
MODULE_ALIAS("netdev-" device)
-#if defined(DEBUG)
-#define netdev_dbg(__dev, format, args...) \
- netdev_printk(KERN_DEBUG, __dev, format, ##args)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG)
#define netdev_dbg(__dev, format, args...) \
do { \
dynamic_netdev_dbg(__dev, format, ##args); \
} while (0)
+#elif defined(DEBUG)
+#define netdev_dbg(__dev, format, args...) \
+ netdev_printk(KERN_DEBUG, __dev, format, ##args)
#else
#define netdev_dbg(__dev, format, args...) \
({ \
__pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
void pci_unregister_driver(struct pci_driver *dev);
+
+/**
+ * module_pci_driver() - Helper macro for registering a PCI driver
+ * @__pci_driver: pci_driver struct
+ *
+ * Helper macro for PCI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_pci_driver(__pci_driver) \
+ module_driver(__pci_driver, pci_register_driver, \
+ pci_unregister_driver)
+
void pci_remove_behind_bridge(struct pci_dev *dev);
struct pci_driver *pci_dev_driver(const struct pci_dev *dev);
int pci_add_dynid(struct pci_driver *drv,
#endif
/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG)
/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
#define pr_debug(fmt, ...) \
dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#elif defined(DEBUG)
+#define pr_debug(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_debug(fmt, ...) \
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+#ifndef __SOC_BUS_H
+#define __SOC_BUS_H
+
+#include <linux/device.h>
+
+struct soc_device_attribute {
+ const char *machine;
+ const char *family;
+ const char *revision;
+ const char *soc_id;
+};
+
+/**
+ * soc_device_register - register SoC as a device
+ * @soc_plat_dev_attr: Attributes passed from platform to be attributed to a SoC
+ */
+struct soc_device *soc_device_register(
+ struct soc_device_attribute *soc_plat_dev_attr);
+
+/**
+ * soc_device_unregister - unregister SoC device
+ * @dev: SoC device to be unregistered
+ */
+void soc_device_unregister(struct soc_device *soc_dev);
+
+/**
+ * soc_device_to_device - helper function to fetch struct device
+ * @soc: Previously registered SoC device container
+ */
+struct device *soc_device_to_device(struct soc_device *soc);
+
+#endif /* __SOC_BUS_H */
return false;
/* driver filter on but not yet initialized */
- drv = get_driver(dev->driver);
+ drv = dev->driver;
if (!drv)
return false;
}
read_unlock_irqrestore(&driver_name_lock, flags);
- put_driver(drv);
return ret;
}
static DEFINE_MUTEX(ddebug_lock);
static LIST_HEAD(ddebug_tables);
static int verbose = 0;
+module_param(verbose, int, 0644);
/* Return the last part of a pathname */
static inline const char *basename(const char *path)
return tail ? tail+1 : path;
}
+/* Return the path relative to source root */
+static inline const char *trim_prefix(const char *path)
+{
+ int skip = strlen(__FILE__) - strlen("lib/dynamic_debug.c");
+
+ if (strncmp(path, __FILE__, skip))
+ skip = 0; /* prefix mismatch, don't skip */
+
+ return path + skip;
+}
+
static struct { unsigned flag:8; char opt_char; } opt_array[] = {
{ _DPRINTK_FLAGS_PRINT, 'p' },
{ _DPRINTK_FLAGS_INCL_MODNAME, 'm' },
{ _DPRINTK_FLAGS_INCL_FUNCNAME, 'f' },
{ _DPRINTK_FLAGS_INCL_LINENO, 'l' },
{ _DPRINTK_FLAGS_INCL_TID, 't' },
+ { _DPRINTK_FLAGS_NONE, '_' },
};
/* format a string into buf[] which describes the _ddebug's flags */
char *p = buf;
int i;
- BUG_ON(maxlen < 4);
+ BUG_ON(maxlen < 6);
for (i = 0; i < ARRAY_SIZE(opt_array); ++i)
if (dp->flags & opt_array[i].flag)
*p++ = opt_array[i].opt_char;
if (p == buf)
- *p++ = '-';
+ *p++ = '_';
*p = '\0';
return buf;
}
+#define vpr_info_dq(q, msg) \
+do { \
+ if (verbose) \
+ /* trim last char off format print */ \
+ pr_info("%s: func=\"%s\" file=\"%s\" " \
+ "module=\"%s\" format=\"%.*s\" " \
+ "lineno=%u-%u", \
+ msg, \
+ q->function ? q->function : "", \
+ q->filename ? q->filename : "", \
+ q->module ? q->module : "", \
+ (int)(q->format ? strlen(q->format) - 1 : 0), \
+ q->format ? q->format : "", \
+ q->first_lineno, q->last_lineno); \
+} while (0)
+
/*
- * Search the tables for _ddebug's which match the given
- * `query' and apply the `flags' and `mask' to them. Tells
- * the user which ddebug's were changed, or whether none
- * were matched.
+ * Search the tables for _ddebug's which match the given `query' and
+ * apply the `flags' and `mask' to them. Returns number of matching
+ * callsites, normally the same as number of changes. If verbose,
+ * logs the changes. Takes ddebug_lock.
*/
-static void ddebug_change(const struct ddebug_query *query,
- unsigned int flags, unsigned int mask)
+static int ddebug_change(const struct ddebug_query *query,
+ unsigned int flags, unsigned int mask)
{
int i;
struct ddebug_table *dt;
unsigned int newflags;
unsigned int nfound = 0;
- char flagbuf[8];
+ char flagbuf[10];
/* search for matching ddebugs */
mutex_lock(&ddebug_lock);
list_for_each_entry(dt, &ddebug_tables, link) {
/* match against the module name */
- if (query->module != NULL &&
- strcmp(query->module, dt->mod_name))
+ if (query->module && strcmp(query->module, dt->mod_name))
continue;
for (i = 0 ; i < dt->num_ddebugs ; i++) {
struct _ddebug *dp = &dt->ddebugs[i];
/* match against the source filename */
- if (query->filename != NULL &&
+ if (query->filename &&
strcmp(query->filename, dp->filename) &&
- strcmp(query->filename, basename(dp->filename)))
+ strcmp(query->filename, basename(dp->filename)) &&
+ strcmp(query->filename, trim_prefix(dp->filename)))
continue;
/* match against the function */
- if (query->function != NULL &&
+ if (query->function &&
strcmp(query->function, dp->function))
continue;
/* match against the format */
- if (query->format != NULL &&
- strstr(dp->format, query->format) == NULL)
+ if (query->format &&
+ !strstr(dp->format, query->format))
continue;
/* match against the line number range */
if (newflags == dp->flags)
continue;
dp->flags = newflags;
- if (newflags)
- dp->enabled = 1;
- else
- dp->enabled = 0;
if (verbose)
- pr_info("changed %s:%d [%s]%s %s\n",
- dp->filename, dp->lineno,
+ pr_info("changed %s:%d [%s]%s =%s\n",
+ trim_prefix(dp->filename), dp->lineno,
dt->mod_name, dp->function,
ddebug_describe_flags(dp, flagbuf,
sizeof(flagbuf)));
if (!nfound && verbose)
pr_info("no matches for query\n");
+
+ return nfound;
}
/*
buf = skip_spaces(buf);
if (!*buf)
break; /* oh, it was trailing whitespace */
+ if (*buf == '#')
+ break; /* token starts comment, skip rest of line */
- /* Run `end' over a word, either whitespace separated or quoted */
+ /* find `end' of word, whitespace separated or quoted */
if (*buf == '"' || *buf == '\'') {
int quote = *buf++;
for (end = buf ; *end && *end != quote ; end++)
;
BUG_ON(end == buf);
}
- /* Here `buf' is the start of the word, `end' is one past the end */
+ /* `buf' is start of word, `end' is one past its end */
if (nwords == maxwords)
return -EINVAL; /* ran out of words[] before bytes */
if (*end)
return str;
}
+static int check_set(const char **dest, char *src, char *name)
+{
+ int rc = 0;
+
+ if (*dest) {
+ rc = -EINVAL;
+ pr_err("match-spec:%s val:%s overridden by %s",
+ name, *dest, src);
+ }
+ *dest = src;
+ return rc;
+}
+
/*
* Parse words[] as a ddebug query specification, which is a series
* of (keyword, value) pairs chosen from these possibilities:
* format <escaped-string-to-find-in-format>
* line <lineno>
* line <first-lineno>-<last-lineno> // where either may be empty
+ *
+ * Only 1 of each type is allowed.
+ * Returns 0 on success, <0 on error.
*/
static int ddebug_parse_query(char *words[], int nwords,
struct ddebug_query *query)
{
unsigned int i;
+ int rc;
/* check we have an even number of words */
if (nwords % 2 != 0)
for (i = 0 ; i < nwords ; i += 2) {
if (!strcmp(words[i], "func"))
- query->function = words[i+1];
+ rc = check_set(&query->function, words[i+1], "func");
else if (!strcmp(words[i], "file"))
- query->filename = words[i+1];
+ rc = check_set(&query->filename, words[i+1], "file");
else if (!strcmp(words[i], "module"))
- query->module = words[i+1];
+ rc = check_set(&query->module, words[i+1], "module");
else if (!strcmp(words[i], "format"))
- query->format = unescape(words[i+1]);
+ rc = check_set(&query->format, unescape(words[i+1]),
+ "format");
else if (!strcmp(words[i], "line")) {
char *first = words[i+1];
char *last = strchr(first, '-');
+ if (query->first_lineno || query->last_lineno) {
+ pr_err("match-spec:line given 2 times\n");
+ return -EINVAL;
+ }
if (last)
*last++ = '\0';
if (parse_lineno(first, &query->first_lineno) < 0)
return -EINVAL;
- if (last != NULL) {
+ if (last) {
/* range <first>-<last> */
- if (parse_lineno(last, &query->last_lineno) < 0)
+ if (parse_lineno(last, &query->last_lineno)
+ < query->first_lineno) {
+ pr_err("last-line < 1st-line\n");
return -EINVAL;
+ }
} else {
query->last_lineno = query->first_lineno;
}
} else {
- if (verbose)
- pr_err("unknown keyword \"%s\"\n", words[i]);
+ pr_err("unknown keyword \"%s\"\n", words[i]);
return -EINVAL;
}
+ if (rc)
+ return rc;
}
-
- if (verbose)
- pr_info("q->function=\"%s\" q->filename=\"%s\" "
- "q->module=\"%s\" q->format=\"%s\" q->lineno=%u-%u\n",
- query->function, query->filename,
- query->module, query->format, query->first_lineno,
- query->last_lineno);
-
+ vpr_info_dq(query, "parsed");
return 0;
}
if (i < 0)
return -EINVAL;
}
- if (flags == 0)
- return -EINVAL;
if (verbose)
pr_info("flags=0x%x\n", flags);
unsigned int flags = 0, mask = 0;
struct ddebug_query query;
#define MAXWORDS 9
- int nwords;
+ int nwords, nfound;
char *words[MAXWORDS];
nwords = ddebug_tokenize(query_string, words, MAXWORDS);
return -EINVAL;
/* actually go and implement the change */
- ddebug_change(&query, flags, mask);
- return 0;
+ nfound = ddebug_change(&query, flags, mask);
+ vpr_info_dq((&query), (nfound) ? "applied" : "no-match");
+
+ return nfound;
+}
+
+/* handle multiple queries in query string, continue on error, return
+ last error or number of matching callsites. Module name is either
+ in param (for boot arg) or perhaps in query string.
+*/
+static int ddebug_exec_queries(char *query)
+{
+ char *split;
+ int i, errs = 0, exitcode = 0, rc, nfound = 0;
+
+ for (i = 0; query; query = split) {
+ split = strpbrk(query, ";\n");
+ if (split)
+ *split++ = '\0';
+
+ query = skip_spaces(query);
+ if (!query || !*query || *query == '#')
+ continue;
+
+ if (verbose)
+ pr_info("query %d: \"%s\"\n", i, query);
+
+ rc = ddebug_exec_query(query);
+ if (rc < 0) {
+ errs++;
+ exitcode = rc;
+ } else
+ nfound += rc;
+ i++;
+ }
+ pr_info("processed %d queries, with %d matches, %d errs\n",
+ i, nfound, errs);
+
+ if (exitcode)
+ return exitcode;
+ return nfound;
}
#define PREFIX_SIZE 64
pos += snprintf(buf + pos, remaining(pos), "%s:",
desc->function);
if (desc->flags & _DPRINTK_FLAGS_INCL_LINENO)
- pos += snprintf(buf + pos, remaining(pos), "%d:", desc->lineno);
+ pos += snprintf(buf + pos, remaining(pos), "%d:",
+ desc->lineno);
if (pos - pos_after_tid)
pos += snprintf(buf + pos, remaining(pos), " ");
if (pos >= PREFIX_SIZE)
#endif
-static __initdata char ddebug_setup_string[1024];
+#define DDEBUG_STRING_SIZE 1024
+static __initdata char ddebug_setup_string[DDEBUG_STRING_SIZE];
+
static __init int ddebug_setup_query(char *str)
{
- if (strlen(str) >= 1024) {
+ if (strlen(str) >= DDEBUG_STRING_SIZE) {
pr_warn("ddebug boot param string too large\n");
return 0;
}
- strcpy(ddebug_setup_string, str);
+ strlcpy(ddebug_setup_string, str, DDEBUG_STRING_SIZE);
return 1;
}
* File_ops->write method for <debugfs>/dynamic_debug/conrol. Gathers the
* command text from userspace, parses and executes it.
*/
+#define USER_BUF_PAGE 4096
static ssize_t ddebug_proc_write(struct file *file, const char __user *ubuf,
size_t len, loff_t *offp)
{
- char tmpbuf[256];
+ char *tmpbuf;
int ret;
if (len == 0)
return 0;
- /* we don't check *offp -- multiple writes() are allowed */
- if (len > sizeof(tmpbuf)-1)
+ if (len > USER_BUF_PAGE - 1) {
+ pr_warn("expected <%d bytes into control\n", USER_BUF_PAGE);
return -E2BIG;
- if (copy_from_user(tmpbuf, ubuf, len))
+ }
+ tmpbuf = kmalloc(len + 1, GFP_KERNEL);
+ if (!tmpbuf)
+ return -ENOMEM;
+ if (copy_from_user(tmpbuf, ubuf, len)) {
+ kfree(tmpbuf);
return -EFAULT;
+ }
tmpbuf[len] = '\0';
if (verbose)
pr_info("read %d bytes from userspace\n", (int)len);
- ret = ddebug_exec_query(tmpbuf);
- if (ret)
+ ret = ddebug_exec_queries(tmpbuf);
+ kfree(tmpbuf);
+ if (ret < 0)
return ret;
*offp += len;
{
struct ddebug_iter *iter = m->private;
struct _ddebug *dp = p;
- char flagsbuf[8];
+ char flagsbuf[10];
if (verbose)
pr_info("called m=%p p=%p\n", m, p);
return 0;
}
- seq_printf(m, "%s:%u [%s]%s %s \"",
- dp->filename, dp->lineno,
- iter->table->mod_name, dp->function,
- ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
+ seq_printf(m, "%s:%u [%s]%s =%s \"",
+ trim_prefix(dp->filename), dp->lineno,
+ iter->table->mod_name, dp->function,
+ ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
seq_escape(m, dp->format, "\t\r\n\"");
seq_puts(m, "\"\n");
};
/*
- * File_ops->open method for <debugfs>/dynamic_debug/control. Does the seq_file
- * setup dance, and also creates an iterator to walk the _ddebugs.
- * Note that we create a seq_file always, even for O_WRONLY files
- * where it's not needed, as doing so simplifies the ->release method.
+ * File_ops->open method for <debugfs>/dynamic_debug/control. Does
+ * the seq_file setup dance, and also creates an iterator to walk the
+ * _ddebugs. Note that we create a seq_file always, even for O_WRONLY
+ * files where it's not needed, as doing so simplifies the ->release
+ * method.
*/
static int ddebug_proc_open(struct inode *inode, struct file *file)
{
int ret = 0;
int n = 0;
- if (__start___verbose != __stop___verbose) {
- iter = __start___verbose;
- modname = iter->modname;
- iter_start = iter;
- for (; iter < __stop___verbose; iter++) {
- if (strcmp(modname, iter->modname)) {
- ret = ddebug_add_module(iter_start, n, modname);
- if (ret)
- goto out_free;
- n = 0;
- modname = iter->modname;
- iter_start = iter;
- }
- n++;
+ if (__start___verbose == __stop___verbose) {
+ pr_warn("_ddebug table is empty in a "
+ "CONFIG_DYNAMIC_DEBUG build");
+ return 1;
+ }
+ iter = __start___verbose;
+ modname = iter->modname;
+ iter_start = iter;
+ for (; iter < __stop___verbose; iter++) {
+ if (strcmp(modname, iter->modname)) {
+ ret = ddebug_add_module(iter_start, n, modname);
+ if (ret)
+ goto out_free;
+ n = 0;
+ modname = iter->modname;
+ iter_start = iter;
}
- ret = ddebug_add_module(iter_start, n, modname);
+ n++;
}
+ ret = ddebug_add_module(iter_start, n, modname);
+ if (ret)
+ goto out_free;
/* ddebug_query boot param got passed -> set it up */
if (ddebug_setup_string[0] != '\0') {
- ret = ddebug_exec_query(ddebug_setup_string);
- if (ret)
+ ret = ddebug_exec_queries(ddebug_setup_string);
+ if (ret < 0)
pr_warn("Invalid ddebug boot param %s",
ddebug_setup_string);
else
- pr_info("ddebug initialized with string %s",
- ddebug_setup_string);
+ pr_info("%d changes by ddebug_query\n", ret);
+
+ /* keep tables even on ddebug_query parse error */
+ ret = 0;
}
out_free:
u64 uevent_seqnum;
char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
-static DEFINE_SPINLOCK(sequence_lock);
#ifdef CONFIG_NET
struct uevent_sock {
struct list_head list;
struct sock *sk;
};
static LIST_HEAD(uevent_sock_list);
-static DEFINE_MUTEX(uevent_sock_mutex);
#endif
+/* This lock protects uevent_seqnum and uevent_sock_list */
+static DEFINE_MUTEX(uevent_sock_mutex);
+
/* the strings here must match the enum in include/linux/kobject.h */
static const char *kobject_actions[] = {
[KOBJ_ADD] = "add",
struct kobject *top_kobj;
struct kset *kset;
const struct kset_uevent_ops *uevent_ops;
- u64 seq;
int i = 0;
int retval = 0;
#ifdef CONFIG_NET
else if (action == KOBJ_REMOVE)
kobj->state_remove_uevent_sent = 1;
+ mutex_lock(&uevent_sock_mutex);
/* we will send an event, so request a new sequence number */
- spin_lock(&sequence_lock);
- seq = ++uevent_seqnum;
- spin_unlock(&sequence_lock);
- retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
- if (retval)
+ retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)++uevent_seqnum);
+ if (retval) {
+ mutex_unlock(&uevent_sock_mutex);
goto exit;
+ }
#if defined(CONFIG_NET)
/* send netlink message */
- mutex_lock(&uevent_sock_mutex);
list_for_each_entry(ue_sk, &uevent_sock_list, list) {
struct sock *uevent_sock = ue_sk->sk;
struct sk_buff *skb;
} else
retval = -ENOMEM;
}
- mutex_unlock(&uevent_sock_mutex);
#endif
+ mutex_unlock(&uevent_sock_mutex);
/* call uevent_helper, usually only enabled during early boot */
if (uevent_helper[0] && !kobj_usermode_filter(kobj)) {
}
ADD_TO_DEVTABLE("amba", struct amba_id, do_amba_entry);
+/* LOOKS like x86cpu:vendor:VVVV:family:FFFF:model:MMMM:feature:*,FEAT,*
+ * All fields are numbers. It would be nicer to use strings for vendor
+ * and feature, but getting those out of the build system here is too
+ * complicated.
+ */
+
+static int do_x86cpu_entry(const char *filename, struct x86_cpu_id *id,
+ char *alias)
+{
+ id->feature = TO_NATIVE(id->feature);
+ id->family = TO_NATIVE(id->family);
+ id->model = TO_NATIVE(id->model);
+ id->vendor = TO_NATIVE(id->vendor);
+
+ strcpy(alias, "x86cpu:");
+ ADD(alias, "vendor:", id->vendor != X86_VENDOR_ANY, id->vendor);
+ ADD(alias, ":family:", id->family != X86_FAMILY_ANY, id->family);
+ ADD(alias, ":model:", id->model != X86_MODEL_ANY, id->model);
+ strcat(alias, ":feature:*");
+ if (id->feature != X86_FEATURE_ANY)
+ sprintf(alias + strlen(alias), "%04X*", id->feature);
+ return 1;
+}
+ADD_TO_DEVTABLE("x86cpu", struct x86_cpu_id, do_x86cpu_entry);
+
/* Does namelen bytes of name exactly match the symbol? */
static bool sym_is(const char *name, unsigned namelen, const char *symbol)
{
#include <errno.h>
#include <arpa/inet.h>
#include <linux/connector.h>
+#include <linux/hyperv.h>
#include <linux/netlink.h>
#include <ifaddrs.h>
#include <netdb.h>
#include <syslog.h>
-/*
- * KYS: TODO. Need to register these in the kernel.
- *
- * The following definitions are shared with the in-kernel component; do not
- * change any of this without making the corresponding changes in
- * the KVP kernel component.
- */
-#define CN_KVP_IDX 0x9 /* MSFT KVP functionality */
-#define CN_KVP_VAL 0x1 /* This supports queries from the kernel */
-#define CN_KVP_USER_VAL 0x2 /* This supports queries from the user */
/*
* KVP protocol: The user mode component first registers with the
* We use this infrastructure for also supporting queries from user mode
* application for state that may be maintained in the KVP kernel component.
*
- * XXXKYS: Have a shared header file between the user and kernel (TODO)
*/
-enum kvp_op {
- KVP_REGISTER = 0, /* Register the user mode component*/
- KVP_KERNEL_GET, /*Kernel is requesting the value for the specified key*/
- KVP_KERNEL_SET, /*Kernel is providing the value for the specified key*/
- KVP_USER_GET, /*User is requesting the value for the specified key*/
- KVP_USER_SET /*User is providing the value for the specified key*/
-};
-
-#define HV_KVP_EXCHANGE_MAX_KEY_SIZE 512
-#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE 2048
-
-struct hv_ku_msg {
- __u32 kvp_index;
- __u8 kvp_key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; /* Key name */
- __u8 kvp_value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; /* Key value */
-};
enum key_index {
FullyQualifiedDomainName = 0,
ProcessorArchitecture
};
-/*
- * End of shared definitions.
- */
-
static char kvp_send_buffer[4096];
static char kvp_recv_buffer[4096];
static struct sockaddr_nl addr;
struct pollfd pfd;
struct nlmsghdr *incoming_msg;
struct cn_msg *incoming_cn_msg;
- struct hv_ku_msg *hv_msg;
+ struct hv_kvp_msg *hv_msg;
char *p;
char *key_value;
char *key_name;
message = (struct cn_msg *)kvp_send_buffer;
message->id.idx = CN_KVP_IDX;
message->id.val = CN_KVP_VAL;
- message->seq = KVP_REGISTER;
+
+ hv_msg = (struct hv_kvp_msg *)message->data;
+ hv_msg->kvp_hdr.operation = KVP_OP_REGISTER;
message->ack = 0;
- message->len = 0;
+ message->len = sizeof(struct hv_kvp_msg);
len = netlink_send(fd, message);
if (len < 0) {
incoming_msg = (struct nlmsghdr *)kvp_recv_buffer;
incoming_cn_msg = (struct cn_msg *)NLMSG_DATA(incoming_msg);
+ hv_msg = (struct hv_kvp_msg *)incoming_cn_msg->data;
- switch (incoming_cn_msg->seq) {
- case KVP_REGISTER:
+ switch (hv_msg->kvp_hdr.operation) {
+ case KVP_OP_REGISTER:
/*
* Driver is registering with us; stash away the version
* information.
*/
- p = (char *)incoming_cn_msg->data;
+ p = (char *)hv_msg->body.kvp_version;
lic_version = malloc(strlen(p) + 1);
if (lic_version) {
strcpy(lic_version, p);
}
continue;
- case KVP_KERNEL_GET:
- break;
default:
- continue;
+ break;
}
- hv_msg = (struct hv_ku_msg *)incoming_cn_msg->data;
- key_name = (char *)hv_msg->kvp_key;
- key_value = (char *)hv_msg->kvp_value;
+ hv_msg = (struct hv_kvp_msg *)incoming_cn_msg->data;
+ key_name = (char *)hv_msg->body.kvp_enum_data.data.key;
+ key_value = (char *)hv_msg->body.kvp_enum_data.data.value;
- switch (hv_msg->kvp_index) {
+ switch (hv_msg->body.kvp_enum_data.index) {
case FullyQualifiedDomainName:
kvp_get_domain_name(key_value,
HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
incoming_cn_msg->id.idx = CN_KVP_IDX;
incoming_cn_msg->id.val = CN_KVP_VAL;
- incoming_cn_msg->seq = KVP_USER_SET;
incoming_cn_msg->ack = 0;
- incoming_cn_msg->len = sizeof(struct hv_ku_msg);
+ incoming_cn_msg->len = sizeof(struct hv_kvp_msg);
len = netlink_send(fd, incoming_cn_msg);
if (len < 0) {
git.openpandora.org / pandora-kernel.git / commitdiff