iwlwifi: do not schedule tasklet when rcv unused irq
authorJoonwoo Park <joonwpark81@gmail.com>
Wed, 23 Jan 2008 18:15:20 +0000 (10:15 -0800)
committerDavid S. Miller <davem@davemloft.net>
Fri, 1 Feb 2008 03:26:43 +0000 (19:26 -0800)
The nic controller's scheduler interrupt (CSR_INT_BIT_SCD) indicates
to the driver that scheduler finished to transmit the frame/frames.
This bit is not used and the tasklet should thus not be scheduled upon
its receipt.

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/wireless/iwlwifi/iwl-3945-hw.h
drivers/net/wireless/iwlwifi/iwl-4965-hw.h
drivers/net/wireless/iwlwifi/iwl3945-base.c
drivers/net/wireless/iwlwifi/iwl4965-base.c

index 6e01873..571815d 100644 (file)
@@ -373,7 +373,7 @@ struct iwl3945_eeprom {
 #define CSR_INT_BIT_HW_ERR       (1 << 29) /* DMA hardware error FH_INT[31] */
 #define CSR_INT_BIT_DNLD         (1 << 28) /* uCode Download */
 #define CSR_INT_BIT_FH_TX        (1 << 27) /* Tx DMA FH_INT[1:0] */
-#define CSR_INT_BIT_MAC_CLK_ACTV (1 << 26) /* NIC controller's clock toggled on/off */
+#define CSR_INT_BIT_SCD          (1 << 26) /* TXQ pointer advanced */
 #define CSR_INT_BIT_SW_ERR       (1 << 25) /* uCode error */
 #define CSR_INT_BIT_RF_KILL      (1 << 7)  /* HW RFKILL switch GP_CNTRL[27] toggled */
 #define CSR_INT_BIT_CT_KILL      (1 << 6)  /* Critical temp (chip too hot) rfkill */
index ff71c09..ffe1e9d 100644 (file)
@@ -465,7 +465,7 @@ struct iwl4965_eeprom {
 #define CSR_INT_BIT_HW_ERR       (1 << 29) /* DMA hardware error FH_INT[31] */
 #define CSR_INT_BIT_DNLD         (1 << 28) /* uCode Download */
 #define CSR_INT_BIT_FH_TX        (1 << 27) /* Tx DMA FH_INT[1:0] */
-#define CSR_INT_BIT_MAC_CLK_ACTV (1 << 26) /* NIC controller's clock toggled on/off */
+#define CSR_INT_BIT_SCD          (1 << 26) /* TXQ pointer advanced */
 #define CSR_INT_BIT_SW_ERR       (1 << 25) /* uCode error */
 #define CSR_INT_BIT_RF_KILL      (1 << 7)  /* HW RFKILL switch GP_CNTRL[27] toggled */
 #define CSR_INT_BIT_CT_KILL      (1 << 6)  /* Critical temp (chip too hot) rfkill */
index 8cef48c..f644c6b 100644 (file)
@@ -4759,8 +4759,9 @@ static void iwl3945_irq_tasklet(struct iwl3945_priv *priv)
 #ifdef CONFIG_IWL3945_DEBUG
        if (iwl3945_debug_level & (IWL_DL_ISR)) {
                /* NIC fires this, but we don't use it, redundant with WAKEUP */
-               if (inta & CSR_INT_BIT_MAC_CLK_ACTV)
-                       IWL_DEBUG_ISR("Microcode started or stopped.\n");
+               if (inta & CSR_INT_BIT_SCD)
+                       IWL_DEBUG_ISR("Scheduler finished to transmit "
+                                     "the frame/frames.\n");
 
                /* Alive notification via Rx interrupt will do the real work */
                if (inta & CSR_INT_BIT_ALIVE)
@@ -4768,7 +4769,7 @@ static void iwl3945_irq_tasklet(struct iwl3945_priv *priv)
        }
 #endif
        /* Safely ignore these bits for debug checks below */
-       inta &= ~(CSR_INT_BIT_MAC_CLK_ACTV | CSR_INT_BIT_ALIVE);
+       inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
 
        /* HW RF KILL switch toggled (4965 only) */
        if (inta & CSR_INT_BIT_RF_KILL) {
@@ -4904,8 +4905,11 @@ static irqreturn_t iwl3945_isr(int irq, void *data)
        IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
                      inta, inta_mask, inta_fh);
 
+       inta &= ~CSR_INT_BIT_SCD;
+
        /* iwl3945_irq_tasklet() will service interrupts and re-enable them */
-       tasklet_schedule(&priv->irq_tasklet);
+       if (likely(inta || inta_fh))
+               tasklet_schedule(&priv->irq_tasklet);
 unplugged:
        spin_unlock(&priv->lock);
 
index c856835..131cf5a 100644 (file)
@@ -5137,8 +5137,9 @@ static void iwl4965_irq_tasklet(struct iwl4965_priv *priv)
 #ifdef CONFIG_IWL4965_DEBUG
        if (iwl4965_debug_level & (IWL_DL_ISR)) {
                /* NIC fires this, but we don't use it, redundant with WAKEUP */
-               if (inta & CSR_INT_BIT_MAC_CLK_ACTV)
-                       IWL_DEBUG_ISR("Microcode started or stopped.\n");
+               if (inta & CSR_INT_BIT_SCD)
+                       IWL_DEBUG_ISR("Scheduler finished to transmit "
+                                     "the frame/frames.\n");
 
                /* Alive notification via Rx interrupt will do the real work */
                if (inta & CSR_INT_BIT_ALIVE)
@@ -5146,7 +5147,7 @@ static void iwl4965_irq_tasklet(struct iwl4965_priv *priv)
        }
 #endif
        /* Safely ignore these bits for debug checks below */
-       inta &= ~(CSR_INT_BIT_MAC_CLK_ACTV | CSR_INT_BIT_ALIVE);
+       inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
 
        /* HW RF KILL switch toggled */
        if (inta & CSR_INT_BIT_RF_KILL) {
@@ -5275,8 +5276,11 @@ static irqreturn_t iwl4965_isr(int irq, void *data)
        IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
                      inta, inta_mask, inta_fh);
 
+       inta &= ~CSR_INT_BIT_SCD;
+
        /* iwl4965_irq_tasklet() will service interrupts and re-enable them */
-       tasklet_schedule(&priv->irq_tasklet);
+       if (likely(inta || inta_fh))
+               tasklet_schedule(&priv->irq_tasklet);
 
  unplugged:
        spin_unlock(&priv->lock);