regulator: twl: fix twl6030 enable/disable
authorSaquib Herman <saquib@ti.com>
Fri, 1 Apr 2011 04:52:42 +0000 (10:22 +0530)
committerLiam Girdwood <lrg@slimlogic.co.uk>
Fri, 27 May 2011 09:34:36 +0000 (10:34 +0100)
TWL6030 requires an additional register write to CFG_STATE register
to explicitly state that the regulator is in a certain state. Merely
associating the regulator with the group is not enough. Add the
required register field definitions and fix the handling for
TWL6030 enable/disable.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Saquib Herman <saquib@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@vega.(none)>
drivers/regulator/twl-regulator.c

index 6a29285..2c66605 100644 (file)
@@ -76,6 +76,11 @@ struct twlreg_info {
 #define VREG_BC_PROC           3
 #define VREG_BC_CLK_RST                4
 
+/* TWL6030 LDO register values for CFG_STATE */
+#define TWL6030_CFG_STATE_OFF  0x00
+#define TWL6030_CFG_STATE_ON   0x01
+#define TWL6030_CFG_STATE_GRP_SHIFT    5
+
 static inline int
 twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset)
 {
@@ -149,6 +154,11 @@ static int twlreg_enable(struct regulator_dev *rdev)
 
        ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
 
+       if (!ret && twl_class_is_6030())
+               ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
+                               grp << TWL6030_CFG_STATE_GRP_SHIFT |
+                               TWL6030_CFG_STATE_ON);
+
        udelay(info->delay);
 
        return ret;
@@ -158,17 +168,36 @@ static int twlreg_disable(struct regulator_dev *rdev)
 {
        struct twlreg_info      *info = rdev_get_drvdata(rdev);
        int                     grp;
+       int                     ret;
 
        grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
        if (grp < 0)
                return grp;
 
+       /* For 6030, set the off state for all grps enabled */
+       if (twl_class_is_6030()) {
+               ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
+                       (grp & (P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030)) <<
+                               TWL6030_CFG_STATE_GRP_SHIFT |
+                       TWL6030_CFG_STATE_OFF);
+               if (ret)
+                       return ret;
+       }
+
        if (twl_class_is_4030())
                grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030);
        else
                grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030);
 
-       return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
+       ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
+
+       /* Next, associate cleared grp in state register */
+       if (!ret && twl_class_is_6030())
+               ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
+                               grp << TWL6030_CFG_STATE_GRP_SHIFT |
+                               TWL6030_CFG_STATE_OFF);
+
+       return ret;
 }
 
 static int twlreg_get_status(struct regulator_dev *rdev)