x86: OLPC: move s/r-related EC cmds to EC driver

The new EC driver calls platform-specific suspend and resume hooks; run
XO-1-specific EC commands from there, rather than deep in s/r code.  If we
attempt to run EC commands after the new EC driver has suspended, it is
refused by the ec->suspended checks.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/arch/x86/platform/olpc/olpc-xo1-pm.c b/arch/x86/platform/olpc/olpc-xo1-pm.c
index 8054b64..d75582d 100644 (file)
--- a/arch/x86/platform/olpc/olpc-xo1-pm.c
+++ b/arch/x86/platform/olpc/olpc-xo1-pm.c
@@ -52,16 +52,11 @@ EXPORT_SYMBOL_GPL(olpc_xo1_pm_wakeup_clear);
 static int xo1_power_state_enter(suspend_state_t pm_state)
 {
        unsigned long saved_sci_mask;
-       int r;
 
        /* Only STR is supported */
        if (pm_state != PM_SUSPEND_MEM)
                return -EINVAL;
 
-       r = olpc_ec_cmd(EC_SET_SCI_INHIBIT, NULL, 0, NULL, 0);
-       if (r)
-               return r;
-
        /*
         * Save SCI mask (this gets lost since PM1_EN is used as a mask for
         * wakeup events, which is not necessarily the same event set)
@@ -77,16 +72,6 @@ static int xo1_power_state_enter(suspend_state_t pm_state)
        /* Restore SCI mask (using dword access to CS5536_PM1_EN) */
        outl(saved_sci_mask, acpi_base + CS5536_PM1_STS);
 
-       /* Tell the EC to stop inhibiting SCIs */
-       olpc_ec_cmd(EC_SET_SCI_INHIBIT_RELEASE, NULL, 0, NULL, 0);
-
-       /*
-        * Tell the wireless module to restart USB communication.
-        * Must be done twice.
-        */
-       olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
-       olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
-
        return 0;
 }
 

diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c
index ed41b43..2737608 100644 (file)
--- a/arch/x86/platform/olpc/olpc.c
+++ b/arch/x86/platform/olpc/olpc.c
@@ -263,11 +263,6 @@ int olpc_ec_sci_query(u16 *sci_value)
 }
 EXPORT_SYMBOL_GPL(olpc_ec_sci_query);
 
-static int olpc_ec_suspend(struct platform_device *pdev)
-{
-       return olpc_ec_mask_write(ec_wakeup_mask);
-}
-
 static bool __init check_ofw_architecture(struct device_node *root)
 {
        const char *olpc_arch;
@@ -339,9 +334,40 @@ static int olpc_xo1_ec_probe(struct platform_device *pdev)
 
        return 0;
 }
+static int olpc_xo1_ec_suspend(struct platform_device *pdev)
+{
+       olpc_ec_mask_write(ec_wakeup_mask);
+
+       /*
+        * Squelch SCIs while suspended.  This is a fix for
+        * <http://dev.laptop.org/ticket/1835>.
+        */
+       return olpc_ec_cmd(EC_SET_SCI_INHIBIT, NULL, 0, NULL, 0);
+}
+
+static int olpc_xo1_ec_resume(struct platform_device *pdev)
+{
+       /* Tell the EC to stop inhibiting SCIs */
+       olpc_ec_cmd(EC_SET_SCI_INHIBIT_RELEASE, NULL, 0, NULL, 0);
+
+       /*
+        * Tell the wireless module to restart USB communication.
+        * Must be done twice.
+        */
+       olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
+       olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
+
+       return 0;
+}
 
 static struct olpc_ec_driver ec_xo1_driver = {
-       .suspend = olpc_ec_suspend,
+       .probe = olpc_xo1_ec_probe,
+       .suspend = olpc_xo1_ec_suspend,
+       .resume = olpc_xo1_ec_resume,
+       .ec_cmd = olpc_xo1_ec_cmd,
+};
+
+static struct olpc_ec_driver ec_xo1_5_driver = {
        .probe = olpc_xo1_ec_probe,
        .ec_cmd = olpc_xo1_ec_cmd,
 };
@@ -354,7 +380,10 @@ static int __init olpc_init(void)
                return 0;
 
        /* register the XO-1 and 1.5-specific EC handler */
-       olpc_ec_driver_register(&ec_xo1_driver, NULL);
+       if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) /* XO-1 */
+               olpc_ec_driver_register(&ec_xo1_driver, NULL);
+       else
+               olpc_ec_driver_register(&ec_xo1_5_driver, NULL);
        platform_device_register_simple("olpc-ec", -1, NULL, 0);
 
        /* assume B1 and above models always have a DCON */